void ast_init_3rdtx(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
u8 jreg;
u32 data;
if (ast->chip == AST2300 || ast->chip == AST2400) {
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
switch (jreg & 0x0e) {
case 0x04:
ast_init_dvo(dev);
break;
case 0x08:
ast_launch_m68k(dev);
break;
case 0x0c:
ast_init_dvo(dev);
break;
default:
if (ast->tx_chip_type == AST_TX_SIL164)
ast_init_dvo(dev);
else {
ast_write32(ast, 0x12000, 0x1688a8a8);
data = ast_read32(ast, 0x1202c);
data &= 0xfffcffff;
ast_write32(ast, 0, data);
}
}
}
}
static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
{
struct device_node *np = dev->pdev->dev.of_node;
struct ast_private *ast = dev->dev_private;
uint32_t data, jregd0, jregd1;
/* Defaults */
ast->config_mode = ast_use_defaults;
*scu_rev = 0xffffffff;
/* Check if we have device-tree properties */
if (np && !of_property_read_u32(np, "aspeed,scu-revision-id",
scu_rev)) {
/* We do, disable P2A access */
ast->config_mode = ast_use_dt;
DRM_INFO("Using device-tree for configuration\n");
return;
}
/* Not all families have a P2A bridge */
if (dev->pdev->device != PCI_CHIP_AST2000)
return;
/*
* The BMC will set SCU 0x40 D[12] to 1 if the P2 bridge
* is disabled. We force using P2A if VGA only mode bit
* is set D[7]
*/
jregd0 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);
jregd1 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
if (!(jregd0 & 0x80) || !(jregd1 & 0x10)) {
/* Double check it's actually working */
data = ast_read32(ast, 0xf004);
if (data != 0xFFFFFFFF) {
/* P2A works, grab silicon revision */
ast->config_mode = ast_use_p2a;
DRM_INFO("Using P2A bridge for configuration\n");
/* Read SCU7c (silicon revision register) */
ast_write32(ast, 0xf004, 0x1e6e0000);
ast_write32(ast, 0xf000, 0x1);
*scu_rev = ast_read32(ast, 0x1207c);
return;
}
}
/* We have a P2A bridge but it's disabled */
DRM_INFO("P2A bridge disabled, using default configuration\n");
}
static int ast_detect_chip(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
if (dev->pdev->device == PCI_CHIP_AST1180) {
ast->chip = AST1100;
DRM_INFO("AST 1180 detected\n");
} else {
if (dev->pdev->revision >= 0x20) {
ast->chip = AST2300;
DRM_INFO("AST 2300 detected\n");
} else if (dev->pdev->revision >= 0x10) {
uint32_t data;
ast_write32(ast, 0xf004, 0x1e6e0000);
ast_write32(ast, 0xf000, 0x1);
data = ast_read32(ast, 0x1207c);
switch (data & 0x0300) {
case 0x0200:
ast->chip = AST1100;
DRM_INFO("AST 1100 detected\n");
break;
case 0x0100:
ast->chip = AST2200;
DRM_INFO("AST 2200 detected\n");
break;
case 0x0000:
ast->chip = AST2150;
DRM_INFO("AST 2150 detected\n");
break;
default:
ast->chip = AST2100;
DRM_INFO("AST 2100 detected\n");
break;
}
ast->vga2_clone = false;
} else {
ast->chip = 2000;
DRM_INFO("AST 2000 detected\n");
}
}
return 0;
}
static void ast_init_analog(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
u32 data;
/*
* Set DAC source to VGA mode in SCU2C via the P2A
* bridge. First configure the P2U to target the SCU
* in case it isn't at this stage.
*/
ast_write32(ast, 0xf004, 0x1e6e0000);
ast_write32(ast, 0xf000, 0x1);
/* Then unlock the SCU with the magic password */
ast_write32(ast, 0x12000, 0x1688a8a8);
ast_write32(ast, 0x12000, 0x1688a8a8);
ast_write32(ast, 0x12000, 0x1688a8a8);
/* Finally, clear bits [17:16] of SCU2c */
data = ast_read32(ast, 0x1202c);
data &= 0xfffcffff;
ast_write32(ast, 0, data);
/* Disable DVO */
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xcf, 0x00);
}
static int ast_detect_chip(struct drm_device *dev, bool *need_post)
{
struct ast_private *ast = dev->dev_private;
uint32_t data, jreg;
ast_open_key(ast);
if (dev->pdev->device == PCI_CHIP_AST1180) {
ast->chip = AST1100;
DRM_INFO("AST 1180 detected\n");
} else {
if (dev->pdev->revision >= 0x30) {
ast->chip = AST2400;
DRM_INFO("AST 2400 detected\n");
} else if (dev->pdev->revision >= 0x20) {
ast->chip = AST2300;
DRM_INFO("AST 2300 detected\n");
} else if (dev->pdev->revision >= 0x10) {
uint32_t data;
ast_write32(ast, 0xf004, 0x1e6e0000);
ast_write32(ast, 0xf000, 0x1);
data = ast_read32(ast, 0x1207c);
switch (data & 0x0300) {
case 0x0200:
ast->chip = AST1100;
DRM_INFO("AST 1100 detected\n");
break;
case 0x0100:
ast->chip = AST2200;
DRM_INFO("AST 2200 detected\n");
break;
case 0x0000:
ast->chip = AST2150;
DRM_INFO("AST 2150 detected\n");
break;
default:
ast->chip = AST2100;
DRM_INFO("AST 2100 detected\n");
break;
}
ast->vga2_clone = false;
} else {
ast->chip = AST2000;
DRM_INFO("AST 2000 detected\n");
}
}
/*
* If VGA isn't enabled, we need to enable now or subsequent
* access to the scratch registers will fail. We also inform
* our caller that it needs to POST the chip
* (Assumption: VGA not enabled -> need to POST)
*/
if (!ast_is_vga_enabled(dev)) {
ast_enable_vga(dev);
ast_enable_mmio(dev);
DRM_INFO("VGA not enabled on entry, requesting chip POST\n");
*need_post = true;
} else
*need_post = false;
/* Check if we support wide screen */
switch (ast->chip) {
case AST1180:
ast->support_wide_screen = true;
break;
case AST2000:
ast->support_wide_screen = false;
break;
default:
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);
if (!(jreg & 0x80))
ast->support_wide_screen = true;
else if (jreg & 0x01)
ast->support_wide_screen = true;
else {
ast->support_wide_screen = false;
/* Read SCU7c (silicon revision register) */
ast_write32(ast, 0xf004, 0x1e6e0000);
ast_write32(ast, 0xf000, 0x1);
data = ast_read32(ast, 0x1207c);
data &= 0x300;
if (ast->chip == AST2300 && data == 0x0) /* ast1300 */
ast->support_wide_screen = true;
if (ast->chip == AST2400 && data == 0x100) /* ast1400 */
ast->support_wide_screen = true;
}
break;
}
/* Check 3rd Tx option (digital output afaik) */
ast->tx_chip_type = AST_TX_NONE;
/*
* VGACRA3 Enhanced Color Mode Register, check if DVO is already
* enabled, in that case, assume we have a SIL164 TMDS transmitter
*
* Don't make that assumption if we the chip wasn't enabled and
* is at power-on reset, otherwise we'll incorrectly "detect" a
* SIL164 when there is none.
*/
if (!*need_post) {
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xff);
if (jreg & 0x80)
ast->tx_chip_type = AST_TX_SIL164;
}
if ((ast->chip == AST2300) || (ast->chip == AST2400)) {
/*
* On AST2300 and 2400, look the configuration set by the SoC in
* the SOC scratch register #1 bits 11:8 (interestingly marked
* as "reserved" in the spec)
*/
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
switch (jreg) {
case 0x04:
ast->tx_chip_type = AST_TX_SIL164;
break;
case 0x08:
ast->dp501_fw_addr = kzalloc(32*1024, GFP_KERNEL);
if (ast->dp501_fw_addr) {
/* backup firmware */
if (ast_backup_fw(dev, ast->dp501_fw_addr, 32*1024)) {
kfree(ast->dp501_fw_addr);
ast->dp501_fw_addr = NULL;
}
}
/* fallthrough */
case 0x0c:
ast->tx_chip_type = AST_TX_DP501;
}
}
/* Print stuff for diagnostic purposes */
switch(ast->tx_chip_type) {
case AST_TX_SIL164:
DRM_INFO("Using Sil164 TMDS transmitter\n");
break;
case AST_TX_DP501:
DRM_INFO("Using DP501 DisplayPort transmitter\n");
break;
default:
DRM_INFO("Analog VGA only\n");
}
return 0;
}
static int ast_get_dram_info(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
uint32_t data, data2;
uint32_t denum, num, div, ref_pll;
ast_write32(ast, 0xf004, 0x1e6e0000);
ast_write32(ast, 0xf000, 0x1);
ast_write32(ast, 0x10000, 0xfc600309);
do {
;
} while (ast_read32(ast, 0x10000) != 0x01);
data = ast_read32(ast, 0x10004);
if (data & 0x400)
ast->dram_bus_width = 16;
else
ast->dram_bus_width = 32;
if (ast->chip == AST2300 || ast->chip == AST2400) {
switch (data & 0x03) {
case 0:
ast->dram_type = AST_DRAM_512Mx16;
break;
default:
case 1:
ast->dram_type = AST_DRAM_1Gx16;
break;
case 2:
ast->dram_type = AST_DRAM_2Gx16;
break;
case 3:
ast->dram_type = AST_DRAM_4Gx16;
break;
}
} else {
switch (data & 0x0c) {
case 0:
case 4:
ast->dram_type = AST_DRAM_512Mx16;
break;
case 8:
if (data & 0x40)
ast->dram_type = AST_DRAM_1Gx16;
else
ast->dram_type = AST_DRAM_512Mx32;
break;
case 0xc:
ast->dram_type = AST_DRAM_1Gx32;
break;
}
}
data = ast_read32(ast, 0x10120);
data2 = ast_read32(ast, 0x10170);
if (data2 & 0x2000)
ref_pll = 14318;
else
ref_pll = 12000;
denum = data & 0x1f;
num = (data & 0x3fe0) >> 5;
data = (data & 0xc000) >> 14;
switch (data) {
case 3:
div = 0x4;
break;
case 2:
case 1:
div = 0x2;
break;
default:
div = 0x1;
break;
}
ast->mclk = ref_pll * (num + 2) / (denum + 2) * (div * 1000);
return 0;
}
static int ast_detect_chip(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
uint32_t data, jreg;
if (dev->pdev->device == PCI_CHIP_AST1180) {
ast->chip = AST1100;
DRM_INFO("AST 1180 detected\n");
} else {
if (dev->pdev->revision >= 0x30) {
ast->chip = AST2400;
DRM_INFO("AST 2400 detected\n");
} else if (dev->pdev->revision >= 0x20) {
ast->chip = AST2300;
DRM_INFO("AST 2300 detected\n");
} else if (dev->pdev->revision >= 0x10) {
uint32_t data;
ast_write32(ast, 0xf004, 0x1e6e0000);
ast_write32(ast, 0xf000, 0x1);
data = ast_read32(ast, 0x1207c);
switch (data & 0x0300) {
case 0x0200:
ast->chip = AST1100;
DRM_INFO("AST 1100 detected\n");
break;
case 0x0100:
ast->chip = AST2200;
DRM_INFO("AST 2200 detected\n");
break;
case 0x0000:
ast->chip = AST2150;
DRM_INFO("AST 2150 detected\n");
break;
default:
ast->chip = AST2100;
DRM_INFO("AST 2100 detected\n");
break;
}
ast->vga2_clone = false;
} else {
ast->chip = AST2000;
DRM_INFO("AST 2000 detected\n");
}
}
switch (ast->chip) {
case AST1180:
ast->support_wide_screen = true;
break;
case AST2000:
ast->support_wide_screen = false;
break;
default:
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);
if (!(jreg & 0x80))
ast->support_wide_screen = true;
else if (jreg & 0x01)
ast->support_wide_screen = true;
else {
ast->support_wide_screen = false;
ast_write32(ast, 0xf004, 0x1e6e0000);
ast_write32(ast, 0xf000, 0x1);
data = ast_read32(ast, 0x1207c);
data &= 0x300;
if (ast->chip == AST2300 && data == 0x0) /* ast1300 */
ast->support_wide_screen = true;
if (ast->chip == AST2400 && data == 0x100) /* ast1400 */
ast->support_wide_screen = true;
}
break;
}
ast->tx_chip_type = AST_TX_NONE;
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xff);
if (jreg & 0x80)
ast->tx_chip_type = AST_TX_SIL164;
if ((ast->chip == AST2300) || (ast->chip == AST2400)) {
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
switch (jreg) {
case 0x04:
ast->tx_chip_type = AST_TX_SIL164;
break;
case 0x08:
ast->dp501_fw_addr = kzalloc(32*1024, GFP_KERNEL);
if (ast->dp501_fw_addr) {
/* backup firmware */
if (ast_backup_fw(dev, ast->dp501_fw_addr, 32*1024)) {
kfree(ast->dp501_fw_addr);
ast->dp501_fw_addr = NULL;
}
}
/* fallthrough */
case 0x0c:
ast->tx_chip_type = AST_TX_DP501;
}
}
return 0;
}
static bool ast_init_dvo(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
u8 jreg;
u32 data;
ast_write32(ast, 0xf004, 0x1e6e0000);
ast_write32(ast, 0xf000, 0x1);
ast_write32(ast, 0x12000, 0x1688a8a8);
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);
if (!(jreg & 0x80)) {
/* Init SCU DVO Settings */
data = ast_read32(ast, 0x12008);
/* delay phase */
data &= 0xfffff8ff;
data |= 0x00000500;
ast_write32(ast, 0x12008, data);
if (ast->chip == AST2300) {
data = ast_read32(ast, 0x12084);
/* multi-pins for DVO single-edge */
data |= 0xfffe0000;
ast_write32(ast, 0x12084, data);
data = ast_read32(ast, 0x12088);
/* multi-pins for DVO single-edge */
data |= 0x000fffff;
ast_write32(ast, 0x12088, data);
data = ast_read32(ast, 0x12090);
/* multi-pins for DVO single-edge */
data &= 0xffffffcf;
data |= 0x00000020;
ast_write32(ast, 0x12090, data);
} else { /* AST2400 */
data = ast_read32(ast, 0x12088);
/* multi-pins for DVO single-edge */
data |= 0x30000000;
ast_write32(ast, 0x12088, data);
data = ast_read32(ast, 0x1208c);
/* multi-pins for DVO single-edge */
data |= 0x000000cf;
ast_write32(ast, 0x1208c, data);
data = ast_read32(ast, 0x120a4);
/* multi-pins for DVO single-edge */
data |= 0xffff0000;
ast_write32(ast, 0x120a4, data);
data = ast_read32(ast, 0x120a8);
/* multi-pins for DVO single-edge */
data |= 0x0000000f;
ast_write32(ast, 0x120a8, data);
data = ast_read32(ast, 0x12094);
/* multi-pins for DVO single-edge */
data |= 0x00000002;
ast_write32(ast, 0x12094, data);
}
}
/* Force to DVO */
data = ast_read32(ast, 0x1202c);
data &= 0xfffbffff;
ast_write32(ast, 0x1202c, data);
/* Init VGA DVO Settings */
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xcf, 0x80);
return true;
}
static int ast_get_dram_info(struct drm_device *dev)
{
struct device_node *np = dev->pdev->dev.of_node;
struct ast_private *ast = dev->dev_private;
uint32_t mcr_cfg, mcr_scu_mpll, mcr_scu_strap;
uint32_t denum, num, div, ref_pll, dsel;
switch (ast->config_mode) {
case ast_use_dt:
/*
* If some properties are missing, use reasonable
* defaults for AST2400
*/
if (of_property_read_u32(np, "aspeed,mcr-configuration",
&mcr_cfg))
mcr_cfg = 0x00000577;
if (of_property_read_u32(np, "aspeed,mcr-scu-mpll",
&mcr_scu_mpll))
mcr_scu_mpll = 0x000050C0;
if (of_property_read_u32(np, "aspeed,mcr-scu-strap",
&mcr_scu_strap))
mcr_scu_strap = 0;
break;
case ast_use_p2a:
ast_write32(ast, 0xf004, 0x1e6e0000);
ast_write32(ast, 0xf000, 0x1);
mcr_cfg = ast_read32(ast, 0x10004);
mcr_scu_mpll = ast_read32(ast, 0x10120);
mcr_scu_strap = ast_read32(ast, 0x10170);
break;
case ast_use_defaults:
default:
ast->dram_bus_width = 16;
ast->dram_type = AST_DRAM_1Gx16;
if (ast->chip == AST2500)
ast->mclk = 800;
else
ast->mclk = 396;
return 0;
}
if (mcr_cfg & 0x40)
ast->dram_bus_width = 16;
else
ast->dram_bus_width = 32;
if (ast->chip == AST2500) {
switch (mcr_cfg & 0x03) {
case 0:
ast->dram_type = AST_DRAM_1Gx16;
break;
default:
case 1:
ast->dram_type = AST_DRAM_2Gx16;
break;
case 2:
ast->dram_type = AST_DRAM_4Gx16;
break;
case 3:
ast->dram_type = AST_DRAM_8Gx16;
break;
}
} else if (ast->chip == AST2300 || ast->chip == AST2400) {
switch (mcr_cfg & 0x03) {
case 0:
ast->dram_type = AST_DRAM_512Mx16;
break;
default:
case 1:
ast->dram_type = AST_DRAM_1Gx16;
break;
case 2:
ast->dram_type = AST_DRAM_2Gx16;
break;
case 3:
ast->dram_type = AST_DRAM_4Gx16;
break;
}
} else {
switch (mcr_cfg & 0x0c) {
case 0:
case 4:
ast->dram_type = AST_DRAM_512Mx16;
break;
case 8:
if (mcr_cfg & 0x40)
ast->dram_type = AST_DRAM_1Gx16;
else
ast->dram_type = AST_DRAM_512Mx32;
break;
case 0xc:
ast->dram_type = AST_DRAM_1Gx32;
break;
}
}
if (mcr_scu_strap & 0x2000)
ref_pll = 14318;
else
ref_pll = 12000;
denum = mcr_scu_mpll & 0x1f;
num = (mcr_scu_mpll & 0x3fe0) >> 5;
dsel = (mcr_scu_mpll & 0xc000) >> 14;
switch (dsel) {
case 3:
div = 0x4;
break;
case 2:
case 1:
div = 0x2;
break;
default:
div = 0x1;
break;
}
ast->mclk = ref_pll * (num + 2) / ((denum + 2) * (div * 1000));
return 0;
}
