void at86rf2xx_reset(at86rf2xx_t *dev)
{
eui64_t addr_long;
at86rf2xx_hardware_reset(dev);
/* Reset state machine to ensure a known state */
at86rf2xx_reset_state_machine(dev);
/* reset options and sequence number */
dev->netdev.seq = 0;
dev->netdev.flags = 0;
/* get an 8-byte unique ID to use as hardware address */
luid_get(addr_long.uint8, IEEE802154_LONG_ADDRESS_LEN);
/* make sure we mark the address as non-multicast and not globally unique */
addr_long.uint8[0] &= ~(0x01);
addr_long.uint8[0] |= (0x02);
/* set short and long address */
at86rf2xx_set_addr_long(dev, NTOHLL(addr_long.uint64.u64));
at86rf2xx_set_addr_short(dev, NTOHS(addr_long.uint16[0].u16));
/* set default PAN id */
at86rf2xx_set_pan(dev, AT86RF2XX_DEFAULT_PANID);
/* set default channel */
at86rf2xx_set_chan(dev, AT86RF2XX_DEFAULT_CHANNEL);
/* set default TX power */
at86rf2xx_set_txpower(dev, AT86RF2XX_DEFAULT_TXPOWER);
/* set default options */
at86rf2xx_set_option(dev, AT86RF2XX_OPT_AUTOACK, true);
at86rf2xx_set_option(dev, AT86RF2XX_OPT_CSMA, true);
at86rf2xx_set_option(dev, AT86RF2XX_OPT_TELL_RX_START, false);
at86rf2xx_set_option(dev, AT86RF2XX_OPT_TELL_RX_END, true);
#ifdef MODULE_NETSTATS_L2
at86rf2xx_set_option(dev, AT86RF2XX_OPT_TELL_TX_END, true);
#endif
/* set default protocol */
#ifdef MODULE_GNRC_SIXLOWPAN
dev->netdev.proto = GNRC_NETTYPE_SIXLOWPAN;
#elif MODULE_GNRC
dev->netdev.proto = GNRC_NETTYPE_UNDEF;
#endif
/* enable safe mode (protect RX FIFO until reading data starts) */
at86rf2xx_reg_write(dev, AT86RF2XX_REG__TRX_CTRL_2,
AT86RF2XX_TRX_CTRL_2_MASK__RX_SAFE_MODE);
#ifdef MODULE_AT86RF212B
at86rf2xx_set_page(dev, 0);
#endif
/* don't populate masked interrupt flags to IRQ_STATUS register */
uint8_t tmp = at86rf2xx_reg_read(dev, AT86RF2XX_REG__TRX_CTRL_1);
tmp &= ~(AT86RF2XX_TRX_CTRL_1_MASK__IRQ_MASK_MODE);
at86rf2xx_reg_write(dev, AT86RF2XX_REG__TRX_CTRL_1, tmp);
/* disable clock output to save power */
tmp = at86rf2xx_reg_read(dev, AT86RF2XX_REG__TRX_CTRL_0);
tmp &= ~(AT86RF2XX_TRX_CTRL_0_MASK__CLKM_CTRL);
tmp &= ~(AT86RF2XX_TRX_CTRL_0_MASK__CLKM_SHA_SEL);
tmp |= (AT86RF2XX_TRX_CTRL_0_CLKM_CTRL__OFF);
at86rf2xx_reg_write(dev, AT86RF2XX_REG__TRX_CTRL_0, tmp);
/* enable interrupts */
at86rf2xx_reg_write(dev, AT86RF2XX_REG__IRQ_MASK,
AT86RF2XX_IRQ_STATUS_MASK__TRX_END);
/* clear interrupt flags */
at86rf2xx_reg_read(dev, AT86RF2XX_REG__IRQ_STATUS);
/* go into RX state */
at86rf2xx_set_state(dev, AT86RF2XX_STATE_RX_AACK_ON);
DEBUG("at86rf2xx_reset(): reset complete.\n");
}
static int _set(netdev2_t *netdev, netopt_t opt, void *val, size_t len)
{
at86rf2xx_t *dev = (at86rf2xx_t *) netdev;
uint8_t old_state = at86rf2xx_get_status(dev);
int res = -ENOTSUP;
if (dev == NULL) {
return -ENODEV;
}
/* temporarily wake up if sleeping */
if (old_state == AT86RF2XX_STATE_SLEEP) {
at86rf2xx_assert_awake(dev);
}
switch (opt) {
case NETOPT_ADDRESS:
if (len > sizeof(uint16_t)) {
res = -EOVERFLOW;
}
else {
at86rf2xx_set_addr_short(dev, *((uint16_t *)val));
/* don't set res to set netdev2_ieee802154_t::short_addr */
}
break;
case NETOPT_ADDRESS_LONG:
if (len > sizeof(uint64_t)) {
res = -EOVERFLOW;
}
else {
at86rf2xx_set_addr_long(dev, *((uint64_t *)val));
/* don't set res to set netdev2_ieee802154_t::long_addr */
}
break;
case NETOPT_NID:
if (len > sizeof(uint16_t)) {
res = -EOVERFLOW;
}
else {
at86rf2xx_set_pan(dev, *((uint16_t *)val));
/* don't set res to set netdev2_ieee802154_t::pan */
}
break;
case NETOPT_CHANNEL:
if (len != sizeof(uint16_t)) {
res = -EINVAL;
}
else {
uint8_t chan = ((uint8_t *)val)[0];
if (chan < AT86RF2XX_MIN_CHANNEL ||
chan > AT86RF2XX_MAX_CHANNEL) {
res = -EINVAL;
break;
}
at86rf2xx_set_chan(dev, chan);
/* don't set res to set netdev2_ieee802154_t::chan */
}
break;
case NETOPT_CHANNEL_PAGE:
if (len != sizeof(uint16_t)) {
res = -EINVAL;
}
else {
uint8_t page = ((uint8_t *)val)[0];
#ifdef MODULE_AT86RF212B
if ((page != 0) && (page != 2)) {
res = -EINVAL;
}
else {
at86rf2xx_set_page(dev, page);
res = sizeof(uint16_t);
}
#else
/* rf23x only supports page 0, no need to configure anything in the driver. */
if (page != 0) {
res = -EINVAL;
}
else {
res = sizeof(uint16_t);
}
#endif
}
break;
case NETOPT_TX_POWER:
if (len > sizeof(int16_t)) {
res = -EOVERFLOW;
}
else {
at86rf2xx_set_txpower(dev, *((int16_t *)val));
res = sizeof(uint16_t);
}
break;
case NETOPT_STATE:
if (len > sizeof(netopt_state_t)) {
res = -EOVERFLOW;
}
else {
res = _set_state(dev, *((netopt_state_t *)val));
}
break;
case NETOPT_AUTOACK:
at86rf2xx_set_option(dev, AT86RF2XX_OPT_AUTOACK,
((bool *)val)[0]);
/* don't set res to set netdev2_ieee802154_t::flags */
break;
case NETOPT_RETRANS:
if (len > sizeof(uint8_t)) {
res = -EOVERFLOW;
}
else {
at86rf2xx_set_max_retries(dev, *((uint8_t *)val));
res = sizeof(uint8_t);
}
break;
case NETOPT_PRELOADING:
at86rf2xx_set_option(dev, AT86RF2XX_OPT_PRELOADING,
((bool *)val)[0]);
res = sizeof(netopt_enable_t);
break;
case NETOPT_PROMISCUOUSMODE:
at86rf2xx_set_option(dev, AT86RF2XX_OPT_PROMISCUOUS,
((bool *)val)[0]);
res = sizeof(netopt_enable_t);
break;
case NETOPT_RX_START_IRQ:
at86rf2xx_set_option(dev, AT86RF2XX_OPT_TELL_RX_START,
((bool *)val)[0]);
res = sizeof(netopt_enable_t);
break;
case NETOPT_RX_END_IRQ:
at86rf2xx_set_option(dev, AT86RF2XX_OPT_TELL_RX_END,
((bool *)val)[0]);
res = sizeof(netopt_enable_t);
break;
case NETOPT_TX_START_IRQ:
at86rf2xx_set_option(dev, AT86RF2XX_OPT_TELL_TX_START,
((bool *)val)[0]);
res = sizeof(netopt_enable_t);
break;
case NETOPT_TX_END_IRQ:
at86rf2xx_set_option(dev, AT86RF2XX_OPT_TELL_TX_END,
((bool *)val)[0]);
res = sizeof(netopt_enable_t);
break;
case NETOPT_CSMA:
at86rf2xx_set_option(dev, AT86RF2XX_OPT_CSMA,
((bool *)val)[0]);
res = sizeof(netopt_enable_t);
break;
case NETOPT_CSMA_RETRIES:
if ((len > sizeof(uint8_t)) ||
(*((uint8_t *)val) > 5)) {
res = -EOVERFLOW;
}
else if (dev->netdev.flags & AT86RF2XX_OPT_CSMA) {
/* only set if CSMA is enabled */
at86rf2xx_set_csma_max_retries(dev, *((uint8_t *)val));
res = sizeof(uint8_t);
}
break;
case NETOPT_CCA_THRESHOLD:
if (len > sizeof(int8_t)) {
res = -EOVERFLOW;
}
else {
at86rf2xx_set_cca_threshold(dev, *((int8_t *)val));
res = sizeof(int8_t);
}
break;
default:
break;
}
/* go back to sleep if were sleeping and state hasn't been changed */
if ((old_state == AT86RF2XX_STATE_SLEEP) &&
(opt != NETOPT_STATE)) {
at86rf2xx_set_state(dev, AT86RF2XX_STATE_SLEEP);
}
if (res == -ENOTSUP) {
res = netdev2_ieee802154_set((netdev2_ieee802154_t *)netdev, opt,
val, len);
}
return res;
}
void at86rf2xx_reset(at86rf2xx_t *dev)
{
#if CPUID_LEN
uint8_t cpuid[CPUID_LEN];
eui64_t addr_long;
#endif
at86rf2xx_hardware_reset(dev);
/* Reset state machine to ensure a known state */
at86rf2xx_reset_state_machine(dev);
/* reset options and sequence number */
dev->seq_nr = 0;
dev->options = 0;
/* set short and long address */
#if CPUID_LEN
cpuid_get(cpuid);
#if CPUID_LEN < 8
/* in case CPUID_LEN < 8, fill missing bytes with zeros */
for (int i = CPUID_LEN; i < 8; i++) {
cpuid[i] = 0;
}
#else
for (int i = 8; i < CPUID_LEN; i++) {
cpuid[i & 0x07] ^= cpuid[i];
}
#endif
/* make sure we mark the address as non-multicast and not globally unique */
cpuid[0] &= ~(0x01);
cpuid[0] |= 0x02;
/* copy and set long address */
memcpy(&addr_long, cpuid, 8);
at86rf2xx_set_addr_long(dev, NTOHLL(addr_long.uint64.u64));
at86rf2xx_set_addr_short(dev, NTOHS(addr_long.uint16[0].u16));
#else
at86rf2xx_set_addr_long(dev, AT86RF2XX_DEFAULT_ADDR_LONG);
at86rf2xx_set_addr_short(dev, AT86RF2XX_DEFAULT_ADDR_SHORT);
#endif
/* set default PAN id */
at86rf2xx_set_pan(dev, AT86RF2XX_DEFAULT_PANID);
/* set default channel */
at86rf2xx_set_chan(dev, AT86RF2XX_DEFAULT_CHANNEL);
/* set default TX power */
at86rf2xx_set_txpower(dev, AT86RF2XX_DEFAULT_TXPOWER);
/* set default options */
at86rf2xx_set_option(dev, AT86RF2XX_OPT_AUTOACK, true);
at86rf2xx_set_option(dev, AT86RF2XX_OPT_CSMA, true);
at86rf2xx_set_option(dev, AT86RF2XX_OPT_TELL_RX_START, false);
at86rf2xx_set_option(dev, AT86RF2XX_OPT_TELL_RX_END, true);
/* set default protocol */
#ifdef MODULE_GNRC_SIXLOWPAN
dev->proto = GNRC_NETTYPE_SIXLOWPAN;
#else
dev->proto = GNRC_NETTYPE_UNDEF;
#endif
/* enable safe mode (protect RX FIFO until reading data starts) */
at86rf2xx_reg_write(dev, AT86RF2XX_REG__TRX_CTRL_2,
AT86RF2XX_TRX_CTRL_2_MASK__RX_SAFE_MODE);
#ifdef MODULE_AT86RF212B
at86rf2xx_set_page(dev, 0);
#endif
/* don't populate masked interrupt flags to IRQ_STATUS register */
uint8_t tmp = at86rf2xx_reg_read(dev, AT86RF2XX_REG__TRX_CTRL_1);
tmp &= ~(AT86RF2XX_TRX_CTRL_1_MASK__IRQ_MASK_MODE);
at86rf2xx_reg_write(dev, AT86RF2XX_REG__TRX_CTRL_1, tmp);
/* disable clock output to save power */
tmp = at86rf2xx_reg_read(dev, AT86RF2XX_REG__TRX_CTRL_0);
tmp &= ~(AT86RF2XX_TRX_CTRL_0_MASK__CLKM_CTRL);
tmp &= ~(AT86RF2XX_TRX_CTRL_0_MASK__CLKM_SHA_SEL);
tmp |= (AT86RF2XX_TRX_CTRL_0_CLKM_CTRL__OFF);
at86rf2xx_reg_write(dev, AT86RF2XX_REG__TRX_CTRL_0, tmp);
/* enable interrupts */
at86rf2xx_reg_write(dev, AT86RF2XX_REG__IRQ_MASK,
AT86RF2XX_IRQ_STATUS_MASK__TRX_END);
/* clear interrupt flags */
at86rf2xx_reg_read(dev, AT86RF2XX_REG__IRQ_STATUS);
/* go into RX state */
at86rf2xx_set_state(dev, AT86RF2XX_STATE_RX_AACK_ON);
DEBUG("at86rf2xx_reset(): reset complete.\n");
}