static void __init onearm_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000, AT91RM9200_PQFP);
/* Setup the serial ports and console */
at91_init_serial(&onearm_uart_config);
}
static void __init cam60_map_io(void)
{
/* Initialize processor: 10 MHz crystal */
at91sam9260_initialize(10000000);
/* Setup the serial ports and console */
at91_init_serial(&cam60_uart_config);
}
static void __init ek_map_io(void)
{
/* Initialize processor: 12.000 MHz crystal */
at91sam9rl_initialize(12000000);
/* Setup the serial ports and console */
at91_init_serial(&ek_uart_config);
}
static void __init carmeva_map_io(void)
{
/* Initialize processor: 20.000 MHz crystal */
at91rm9200_initialize(20000000, AT91RM9200_BGA);
/* Setup the serial ports and console */
at91_init_serial(&carmeva_uart_config);
}
static void __init onearm_map_io(void)
{
at91rm9200_initialize(18432000, AT91RM9200_PQFP);
at91_init_serial(&onearm_uart_config);
}
static void __init eb9200_map_io(void)
{
at91rm9200_map_io();
/* Initialize clocks: 18.432 MHz crystal */
at91_clock_init(18432000);
/* Setup the serial ports and console */
at91_init_serial(&eb9200_uart_config);
}
static void __init carmeva_map_io(void)
{
at91rm9200_map_io();
/* Initialize clocks: 20.000 MHz crystal */
at91_clock_init(20000000);
/* Setup the serial ports and console */
at91_init_serial(&carmeva_uart_config);
}
static void __init csb337_map_io(void)
{
/* Initialize processor: 3.6864 MHz crystal */
at91rm9200_initialize(3686400, AT91RM9200_BGA);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
/* Setup the serial ports and console */
at91_init_serial(&csb337_uart_config);
}
static void __init dk_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000, AT91RM9200_BGA);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
/* Setup the serial ports and console */
at91_init_serial(&dk_uart_config);
}
static void __init ek_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9261_initialize(18432000);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
/* Setup the serial ports and console */
at91_init_serial(&ek_uart_config);
}
static void __init kb9202_map_io(void)
{
/* Initialize processor: 10 MHz crystal */
at91rm9200_initialize(10000000, AT91RM9200_PQFP);
/* Set up the LEDs */
at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
/* Setup the serial ports and console */
at91_init_serial(&kb9202_uart_config);
}
static void __init yl_9200_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
/*Also initialises register clocks & gpio*/
at91rm9200_initialize(18432000, AT91RM9200_PQFP); /*we have a 3 bank system*/
/* Setup the serial ports and console */
at91_init_serial(&yl_9200_uart_config);
/* Setup the LEDs D2=PB17,D3=PB16 */
at91_init_leds(AT91_PIN_PB16,AT91_PIN_PB17); /*cpu-led,timer-led*/
}
static void __init ek_map_io(void)
{
at91rm9200_map_io();
/* Initialize clocks: 18.432 MHz crystal */
at91_clock_init(18432000);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
/* Setup the serial ports and console */
at91_init_serial(&ek_uart_config);
}
static void __init csb637_map_io(void)
{
at91rm9200_map_io();
/* Initialize clocks: 3.6864 MHz crystal */
at91_clock_init(3686400);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
/* Setup the serial ports and console */
at91_init_serial(&csb637_uart_config);
}
