static void
write_value (bfd *abfd, bfd_byte *buf, bfd_vma value, int width)
{
switch (width)
{
case 2: bfd_put_16 (abfd, value, buf); break;
case 4: bfd_put_32 (abfd, value, buf); break;
case 8: bfd_put_64 (abfd, value, buf); break;
default: BFD_FAIL ();
}
}
static void
build_link_order (lang_statement_union_type *statement)
{
switch (statement->header.type)
{
case lang_data_statement_enum:
{
asection *output_section;
struct bfd_link_order *link_order;
bfd_vma value;
bfd_boolean big_endian = FALSE;
output_section = statement->data_statement.output_section;
ASSERT (output_section->owner == link_info.output_bfd);
if (!((output_section->flags & SEC_HAS_CONTENTS) != 0
|| ((output_section->flags & SEC_LOAD) != 0
&& (output_section->flags & SEC_THREAD_LOCAL))))
break;
link_order = bfd_new_link_order (link_info.output_bfd, output_section);
if (link_order == NULL)
einfo (_("%F%P: bfd_new_link_order failed\n"));
link_order->type = bfd_data_link_order;
link_order->offset = statement->data_statement.output_offset;
link_order->u.data.contents = (bfd_byte *) xmalloc (QUAD_SIZE);
value = statement->data_statement.value;
/* If the endianness of the output BFD is not known, then we
base the endianness of the data on the first input file.
By convention, the bfd_put routines for an unknown
endianness are big endian, so we must swap here if the
input file is little endian. */
if (bfd_big_endian (link_info.output_bfd))
big_endian = TRUE;
else if (bfd_little_endian (link_info.output_bfd))
big_endian = FALSE;
else
{
bfd_boolean swap;
swap = FALSE;
if (command_line.endian == ENDIAN_BIG)
big_endian = TRUE;
else if (command_line.endian == ENDIAN_LITTLE)
{
big_endian = FALSE;
swap = TRUE;
}
else if (command_line.endian == ENDIAN_UNSET)
{
big_endian = TRUE;
{
LANG_FOR_EACH_INPUT_STATEMENT (s)
{
if (s->the_bfd != NULL)
{
if (bfd_little_endian (s->the_bfd))
{
big_endian = FALSE;
swap = TRUE;
}
break;
}
}
}
}
if (swap)
{
bfd_byte buffer[8];
switch (statement->data_statement.type)
{
case QUAD:
case SQUAD:
if (sizeof (bfd_vma) >= QUAD_SIZE)
{
bfd_putl64 (value, buffer);
value = bfd_getb64 (buffer);
break;
}
/* Fall through. */
case LONG:
bfd_putl32 (value, buffer);
value = bfd_getb32 (buffer);
break;
case SHORT:
bfd_putl16 (value, buffer);
value = bfd_getb16 (buffer);
break;
case BYTE:
break;
default:
abort ();
}
}
}
ASSERT (output_section->owner == link_info.output_bfd);
switch (statement->data_statement.type)
{
case QUAD:
case SQUAD:
if (sizeof (bfd_vma) >= QUAD_SIZE)
bfd_put_64 (link_info.output_bfd, value,
link_order->u.data.contents);
else
{
bfd_vma high;
if (statement->data_statement.type == QUAD)
high = 0;
else if ((value & 0x80000000) == 0)
high = 0;
else
high = (bfd_vma) -1;
bfd_put_32 (link_info.output_bfd, high,
(link_order->u.data.contents
+ (big_endian ? 0 : 4)));
bfd_put_32 (link_info.output_bfd, value,
(link_order->u.data.contents
+ (big_endian ? 4 : 0)));
}
link_order->size = QUAD_SIZE;
break;
case LONG:
bfd_put_32 (link_info.output_bfd, value,
link_order->u.data.contents);
link_order->size = LONG_SIZE;
break;
case SHORT:
bfd_put_16 (link_info.output_bfd, value,
link_order->u.data.contents);
link_order->size = SHORT_SIZE;
break;
case BYTE:
bfd_put_8 (link_info.output_bfd, value,
link_order->u.data.contents);
link_order->size = BYTE_SIZE;
break;
default:
abort ();
}
link_order->u.data.size = link_order->size;
}
break;
case lang_reloc_statement_enum:
{
lang_reloc_statement_type *rs;
asection *output_section;
struct bfd_link_order *link_order;
rs = &statement->reloc_statement;
output_section = rs->output_section;
ASSERT (output_section->owner == link_info.output_bfd);
if (!((output_section->flags & SEC_HAS_CONTENTS) != 0
|| ((output_section->flags & SEC_LOAD) != 0
&& (output_section->flags & SEC_THREAD_LOCAL))))
break;
link_order = bfd_new_link_order (link_info.output_bfd, output_section);
if (link_order == NULL)
einfo (_("%F%P: bfd_new_link_order failed\n"));
link_order->offset = rs->output_offset;
link_order->size = bfd_get_reloc_size (rs->howto);
link_order->u.reloc.p = (struct bfd_link_order_reloc *)
xmalloc (sizeof (struct bfd_link_order_reloc));
link_order->u.reloc.p->reloc = rs->reloc;
link_order->u.reloc.p->addend = rs->addend_value;
if (rs->name == NULL)
{
link_order->type = bfd_section_reloc_link_order;
if (rs->section->owner == link_info.output_bfd)
link_order->u.reloc.p->u.section = rs->section;
else
{
link_order->u.reloc.p->u.section = rs->section->output_section;
link_order->u.reloc.p->addend += rs->section->output_offset;
}
}
else
{
link_order->type = bfd_symbol_reloc_link_order;
link_order->u.reloc.p->u.name = rs->name;
}
}
break;
case lang_input_section_enum:
{
/* Create a new link_order in the output section with this
attached */
asection *i = statement->input_section.section;
if (i->sec_info_type != SEC_INFO_TYPE_JUST_SYMS
&& (i->flags & SEC_EXCLUDE) == 0)
{
asection *output_section = i->output_section;
struct bfd_link_order *link_order;
ASSERT (output_section->owner == link_info.output_bfd);
if (!((output_section->flags & SEC_HAS_CONTENTS) != 0
|| ((output_section->flags & SEC_LOAD) != 0
&& (output_section->flags & SEC_THREAD_LOCAL))))
break;
link_order = bfd_new_link_order (link_info.output_bfd,
output_section);
if (link_order == NULL)
einfo (_("%F%P: bfd_new_link_order failed\n"));
if ((i->flags & SEC_NEVER_LOAD) != 0
&& (i->flags & SEC_DEBUGGING) == 0)
{
/* We've got a never load section inside one which is
going to be output, we'll change it into a fill. */
link_order->type = bfd_data_link_order;
link_order->u.data.contents = (unsigned char *) "";
link_order->u.data.size = 1;
}
else
{
link_order->type = bfd_indirect_link_order;
link_order->u.indirect.section = i;
ASSERT (i->output_section == output_section);
}
link_order->size = i->size;
link_order->offset = i->output_offset;
}
}
break;
case lang_padding_statement_enum:
/* Make a new link_order with the right filler */
{
asection *output_section;
struct bfd_link_order *link_order;
output_section = statement->padding_statement.output_section;
ASSERT (statement->padding_statement.output_section->owner
== link_info.output_bfd);
if (!((output_section->flags & SEC_HAS_CONTENTS) != 0
|| ((output_section->flags & SEC_LOAD) != 0
&& (output_section->flags & SEC_THREAD_LOCAL))))
break;
link_order = bfd_new_link_order (link_info.output_bfd,
output_section);
if (link_order == NULL)
einfo (_("%F%P: bfd_new_link_order failed\n"));
link_order->type = bfd_data_link_order;
link_order->size = statement->padding_statement.size;
link_order->offset = statement->padding_statement.output_offset;
link_order->u.data.contents = statement->padding_statement.fill->data;
link_order->u.data.size = statement->padding_statement.fill->size;
}
break;
default:
/* All the other ones fall through */
break;
}
/* Insert the addend/value into the instruction or data object being
relocated. */
bfd_reloc_status_type
_bfd_aarch64_elf_put_addend (bfd *abfd,
bfd_byte *address, bfd_reloc_code_real_type r_type,
reloc_howto_type *howto, bfd_signed_vma addend)
{
bfd_reloc_status_type status = bfd_reloc_ok;
bfd_signed_vma old_addend = addend;
bfd_vma contents;
int size;
size = bfd_get_reloc_size (howto);
switch (size)
{
case 2:
contents = bfd_get_16 (abfd, address);
break;
case 4:
if (howto->src_mask != 0xffffffff)
/* Must be 32-bit instruction, always little-endian. */
contents = bfd_getl32 (address);
else
/* Must be 32-bit data (endianness dependent). */
contents = bfd_get_32 (abfd, address);
break;
case 8:
contents = bfd_get_64 (abfd, address);
break;
default:
abort ();
}
switch (howto->complain_on_overflow)
{
case complain_overflow_dont:
break;
case complain_overflow_signed:
status = aarch64_signed_overflow (addend,
howto->bitsize + howto->rightshift);
break;
case complain_overflow_unsigned:
status = aarch64_unsigned_overflow (addend,
howto->bitsize + howto->rightshift);
break;
case complain_overflow_bitfield:
default:
abort ();
}
addend >>= howto->rightshift;
switch (r_type)
{
case BFD_RELOC_AARCH64_JUMP26:
case BFD_RELOC_AARCH64_CALL26:
contents = reencode_branch_ofs_26 (contents, addend);
break;
case BFD_RELOC_AARCH64_BRANCH19:
contents = reencode_cond_branch_ofs_19 (contents, addend);
break;
case BFD_RELOC_AARCH64_TSTBR14:
contents = reencode_tst_branch_ofs_14 (contents, addend);
break;
case BFD_RELOC_AARCH64_LD_LO19_PCREL:
case BFD_RELOC_AARCH64_GOT_LD_PREL19:
if (old_addend & ((1 << howto->rightshift) - 1))
return bfd_reloc_overflow;
contents = reencode_ld_lit_ofs_19 (contents, addend);
break;
case BFD_RELOC_AARCH64_TLSDESC_CALL:
break;
case BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21:
case BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21:
case BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21:
case BFD_RELOC_AARCH64_ADR_GOT_PAGE:
case BFD_RELOC_AARCH64_ADR_LO21_PCREL:
case BFD_RELOC_AARCH64_ADR_HI21_PCREL:
case BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL:
contents = reencode_adr_imm (contents, addend);
break;
case BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC:
case BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12:
case BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12:
case BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC:
case BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC:
case BFD_RELOC_AARCH64_ADD_LO12:
/* Corresponds to: add rd, rn, #uimm12 to provide the low order
12 bits of the page offset following
BFD_RELOC_AARCH64_ADR_HI21_PCREL which computes the
(pc-relative) page base. */
contents = reencode_add_imm (contents, addend);
break;
case BFD_RELOC_AARCH64_LDST8_LO12:
case BFD_RELOC_AARCH64_LDST16_LO12:
case BFD_RELOC_AARCH64_LDST32_LO12:
case BFD_RELOC_AARCH64_LDST64_LO12:
case BFD_RELOC_AARCH64_LDST128_LO12:
case BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC:
case BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC:
case BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC:
case BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC:
case BFD_RELOC_AARCH64_LD64_GOT_LO12_NC:
case BFD_RELOC_AARCH64_LD32_GOT_LO12_NC:
if (old_addend & ((1 << howto->rightshift) - 1))
return bfd_reloc_overflow;
/* Used for ldr*|str* rt, [rn, #uimm12] to provide the low order
12 bits of the page offset following BFD_RELOC_AARCH64_ADR_HI21_PCREL
which computes the (pc-relative) page base. */
contents = reencode_ldst_pos_imm (contents, addend);
break;
/* Group relocations to create high bits of a 16, 32, 48 or 64
bit signed data or abs address inline. Will change
instruction to MOVN or MOVZ depending on sign of calculated
value. */
case BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2:
case BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1:
case BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC:
case BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0:
case BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC:
case BFD_RELOC_AARCH64_MOVW_G0_S:
case BFD_RELOC_AARCH64_MOVW_G1_S:
case BFD_RELOC_AARCH64_MOVW_G2_S:
/* NOTE: We can only come here with movz or movn. */
if (addend < 0)
{
/* Force use of MOVN. */
addend = ~addend;
contents = reencode_movzn_to_movn (contents);
}
else
{
/* Force use of MOVZ. */
contents = reencode_movzn_to_movz (contents);
}
/* fall through */
/* Group relocations to create a 16, 32, 48 or 64 bit unsigned
data or abs address inline. */
case BFD_RELOC_AARCH64_MOVW_G0:
case BFD_RELOC_AARCH64_MOVW_G0_NC:
case BFD_RELOC_AARCH64_MOVW_G1:
case BFD_RELOC_AARCH64_MOVW_G1_NC:
case BFD_RELOC_AARCH64_MOVW_G2:
case BFD_RELOC_AARCH64_MOVW_G2_NC:
case BFD_RELOC_AARCH64_MOVW_G3:
contents = reencode_movw_imm (contents, addend);
break;
default:
/* Repack simple data */
if (howto->dst_mask & (howto->dst_mask + 1))
return bfd_reloc_notsupported;
contents = ((contents & ~howto->dst_mask) | (addend & howto->dst_mask));
break;
}
switch (size)
{
case 2:
bfd_put_16 (abfd, contents, address);
break;
case 4:
if (howto->dst_mask != 0xffffffff)
/* must be 32-bit instruction, always little-endian */
bfd_putl32 (contents, address);
else
/* must be 32-bit data (endianness dependent) */
bfd_put_32 (abfd, contents, address);
break;
case 8:
bfd_put_64 (abfd, contents, address);
break;
default:
abort ();
}
return status;
}
