C++ (Cpp) ble_set_adv_param Exemples

Exemple #1

Fichier : app.c Projet : 937132ztf/BLE_Demos

void on_ready(void)
{
	/*Config Adv Parameter And Ready to Adv*/
	ble_set_adv_param(name, adv_address, tx_power_level, adv_interval);
	ble_device_start_advertising();
	
}

Exemple #2

Fichier : app.c Projet : JUMA-IO/STM32_Platform

void on_ready(void)
{
    uint8_t tx_power_level = 7;
    uint16_t adv_interval = 100;
    /*config adv parameter and start to adv*/
    ble_set_adv_param(name, adv_address, tx_power_level, adv_interval);
    ble_device_start_advertising();
}

Exemple #3

Fichier : app.c Projet : gilbertjuly/cannon

void on_ready(void)
{
    hum_temp_monitor_init();
    /*Config Adv Parameter And Ready to Adv*/
    ble_set_adv_param(name, adv_address, tx_power_level, adv_interval);
    ble_device_start_advertising();

    read_temp_hum(NULL);
}

Exemple #4

Fichier : app.c Projet : JUMA-IO/STM32_Platform

void on_ready(void)
{
    uint8_t tx_power_level = 5;
    uint16_t scan_interval = 400, adv_interval = 567;
    uint8_t bdAddr[6] = {0x04,0x02,0x04,0x03,0x07,0x0d };
    HCI_get_bdAddr(bdAddr);
    /*Config Adv Parameter And Ready to Adv*/
    ble_set_adv_param(board_name, bdAddr, tx_power_level, adv_interval);
    ble_device_start_advertising();
    /*Host*/
    ble_host_set_scan_param(tx_power_level, bdAddr, scan_interval);
    ble_host_start_scan(NULL);
}

Exemple #5

Fichier : app.c Projet : JUMA-IO/STM32_Platform

void on_ready(void)
{
    uint8_t tx_power_level = 7;
    uint16_t adv_interval = 100;
    uint8_t bdAddr[6];
    char name[32];

    running = 0;
    BSP_LED_On(LED0);
    HCI_get_bdAddr(bdAddr);
    sprintf(name, "%s %01x%01x", board_name, bdAddr[0], bdAddr[1]);
    /*Config Adv Parameter And Ready to Adv*/
    ble_set_adv_param(name, bdAddr, tx_power_level, adv_interval);
    ble_device_start_advertising();
}

Exemple #6

Fichier : app.c Projet : 196510921/Cannon_Platform

void on_ready(void)
{
    uint8_t bdAddr[6] = {0x03,0x03,0x03,0x03,0x03,0x03};
#ifdef CLIENT_ROLE
    /*Host*/
    ble_host_set_scan_param(bdAddr, tx_power_level, scan_interval);
    ble_host_start_scan();
#else
    HCI_get_bdAddr(bdAddr);
    adv_name_generate(bdAddr+4);
    /*Config Adv Parameter And Ready to Adv*/
    ble_set_adv_param(name, bdAddr, tx_power_level, adv_interval);
    ble_device_start_advertising();
#endif
    //run_after_delay(sensor_read, NULL, 500);
}

Exemple #7

Fichier : app.c Projet : Sleepsleep/STM32_Platform

void on_ready(void)
{
  uint8_t tx_power_level = 5;
  uint16_t adv_interval = 100;

  uint8_t bdAddr[6];
  uint32_t data_rate = SAMPLINGRATE;
  HCI_get_bdAddr(bdAddr);
  adv_name_generate(bdAddr + 4);
  /*Config Adv Parameter And Ready to Adv*/
  ble_set_adv_param(name, bdAddr, tx_power_level, adv_interval);
  ble_device_start_advertising();

  BSP_LED_Off(LED0);

  imu_sensor_9_axis_reset();

  imu_sensor_9_axis_set_data_rate(&data_rate, LSM6DS3_XG_FIFO_MODE_CONTINUOUS_OVERWRITE);

  imu_sensor_9_axis_start();

}