static void compile_clip_prog( struct brw_context *brw,
struct brw_clip_prog_key *key )
{
struct brw_clip_compile c;
const GLuint *program;
void *mem_ctx;
GLuint program_size;
GLuint i;
memset(&c, 0, sizeof(c));
mem_ctx = ralloc_context(NULL);
/* Begin the compilation:
*/
brw_init_compile(brw, &c.func, mem_ctx);
c.func.single_program_flow = 1;
c.key = *key;
c.vue_map = brw->vue_map_geom_out;
c.has_flat_shading =
brw_any_flat_varyings(&key->interpolation_mode);
c.has_noperspective_shading =
brw_any_noperspective_varyings(&key->interpolation_mode);
/* nr_regs is the number of registers filled by reading data from the VUE.
* This program accesses the entire VUE, so nr_regs needs to be the size of
* the VUE (measured in pairs, since two slots are stored in each
* register).
*/
c.nr_regs = (c.vue_map.num_slots + 1)/2;
c.prog_data.clip_mode = c.key.clip_mode; /* XXX */
/* For some reason the thread is spawned with only 4 channels
* unmasked.
*/
brw_set_mask_control(&c.func, BRW_MASK_DISABLE);
/* Would ideally have the option of producing a program which could
* do all three:
*/
switch (key->primitive) {
case GL_TRIANGLES:
if (key->do_unfilled)
brw_emit_unfilled_clip( &c );
else
brw_emit_tri_clip( &c );
break;
case GL_LINES:
brw_emit_line_clip( &c );
break;
case GL_POINTS:
brw_emit_point_clip( &c );
break;
default:
assert(0);
return;
}
/* get the program
*/
program = brw_get_program(&c.func, &program_size);
if (unlikely(INTEL_DEBUG & DEBUG_CLIP)) {
printf("clip:\n");
for (i = 0; i < program_size / sizeof(struct brw_instruction); i++)
brw_disasm(stdout, &((struct brw_instruction *)program)[i],
brw->gen);
printf("\n");
}
brw_upload_cache(&brw->cache,
BRW_CLIP_PROG,
&c.key, sizeof(c.key),
program, program_size,
&c.prog_data, sizeof(c.prog_data),
&brw->clip.prog_offset, &brw->clip.prog_data);
ralloc_free(mem_ctx);
}
static void compile_clip_prog( struct brw_context *brw,
struct brw_clip_prog_key *key )
{
struct brw_clip_compile c;
const GLuint *program;
void *mem_ctx;
GLuint program_size;
memset(&c, 0, sizeof(c));
mem_ctx = ralloc_context(NULL);
/* Begin the compilation:
*/
brw_init_codegen(&brw->screen->devinfo, &c.func, mem_ctx);
c.func.single_program_flow = 1;
c.key = *key;
c.vue_map = brw->vue_map_geom_out;
/* nr_regs is the number of registers filled by reading data from the VUE.
* This program accesses the entire VUE, so nr_regs needs to be the size of
* the VUE (measured in pairs, since two slots are stored in each
* register).
*/
c.nr_regs = (c.vue_map.num_slots + 1)/2;
c.prog_data.clip_mode = c.key.clip_mode; /* XXX */
/* For some reason the thread is spawned with only 4 channels
* unmasked.
*/
brw_set_default_mask_control(&c.func, BRW_MASK_DISABLE);
/* Would ideally have the option of producing a program which could
* do all three:
*/
switch (key->primitive) {
case GL_TRIANGLES:
if (key->do_unfilled)
brw_emit_unfilled_clip( &c );
else
brw_emit_tri_clip( &c );
break;
case GL_LINES:
brw_emit_line_clip( &c );
break;
case GL_POINTS:
brw_emit_point_clip( &c );
break;
default:
unreachable("not reached");
}
brw_compact_instructions(&c.func, 0, 0, NULL);
/* get the program
*/
program = brw_get_program(&c.func, &program_size);
if (unlikely(INTEL_DEBUG & DEBUG_CLIP)) {
fprintf(stderr, "clip:\n");
brw_disassemble(&brw->screen->devinfo, c.func.store,
0, program_size, stderr);
fprintf(stderr, "\n");
}
brw_upload_cache(&brw->cache,
BRW_CACHE_CLIP_PROG,
&c.key, sizeof(c.key),
program, program_size,
&c.prog_data, sizeof(c.prog_data),
&brw->clip.prog_offset, &brw->clip.prog_data);
ralloc_free(mem_ctx);
}
static void compile_clip_prog( struct brw_context *brw,
struct brw_clip_prog_key *key )
{
struct intel_context *intel = &brw->intel;
struct brw_clip_compile c;
const GLuint *program;
GLuint program_size;
GLuint delta;
GLuint i;
GLuint header_regs;
memset(&c, 0, sizeof(c));
/* Begin the compilation:
*/
brw_init_compile(brw, &c.func);
c.func.single_program_flow = 1;
c.key = *key;
/* Need to locate the two positions present in vertex + header.
* These are currently hardcoded:
*/
c.header_position_offset = ATTR_SIZE;
if (intel->gen == 5)
header_regs = 3;
else
header_regs = 1;
delta = header_regs * REG_SIZE;
for (i = 0; i < VERT_RESULT_MAX; i++) {
if (c.key.attrs & BITFIELD64_BIT(i)) {
c.offset[i] = delta;
delta += ATTR_SIZE;
c.idx_to_attr[c.nr_attrs] = i;
c.nr_attrs++;
}
}
/* The vertex attributes start at a URB row-aligned offset after
* the 8-20 dword vertex header, and continue for a URB row-aligned
* length. nr_regs determines the urb_read_length from the start
* of the header to the end of the vertex data.
*/
c.nr_regs = header_regs + (c.nr_attrs + 1) / 2;
c.nr_bytes = c.nr_regs * REG_SIZE;
c.prog_data.clip_mode = c.key.clip_mode; /* XXX */
/* For some reason the thread is spawned with only 4 channels
* unmasked.
*/
brw_set_mask_control(&c.func, BRW_MASK_DISABLE);
/* Would ideally have the option of producing a program which could
* do all three:
*/
switch (key->primitive) {
case GL_TRIANGLES:
if (key->do_unfilled)
brw_emit_unfilled_clip( &c );
else
brw_emit_tri_clip( &c );
break;
case GL_LINES:
brw_emit_line_clip( &c );
break;
case GL_POINTS:
brw_emit_point_clip( &c );
break;
default:
assert(0);
return;
}
/* get the program
*/
program = brw_get_program(&c.func, &program_size);
if (INTEL_DEBUG & DEBUG_CLIP) {
printf("clip:\n");
for (i = 0; i < program_size / sizeof(struct brw_instruction); i++)
brw_disasm(stdout, &((struct brw_instruction *)program)[i],
intel->gen);
printf("\n");
}
/* Upload
*/
drm_intel_bo_unreference(brw->clip.prog_bo);
brw->clip.prog_bo = brw_upload_cache_with_auxdata(&brw->cache,
BRW_CLIP_PROG,
&c.key, sizeof(c.key),
NULL, 0,
program, program_size,
&c.prog_data,
sizeof(c.prog_data),
&brw->clip.prog_data);
}
