C++ (Cpp) bt_vreg_disable Exemples

Exemple #1

Fichier : bluetooth-power.c Projet : romanbb/android_kernel_lge_d851

static int bluetooth_power(int on)
{
	int rc = 0;

	BT_PWR_DBG("on: %d", on);

	if (on) {
		if (bt_power_pdata->bt_vdd_io) {
			rc = bt_configure_vreg(bt_power_pdata->bt_vdd_io);
			if (rc < 0) {
				BT_PWR_ERR("bt_power vddio config failed");
				goto out;
			}
		}
		if (bt_power_pdata->bt_vdd_ldo) {
			rc = bt_configure_vreg(bt_power_pdata->bt_vdd_ldo);
			if (rc < 0) {
				BT_PWR_ERR("bt_power vddldo config failed");
				goto vdd_ldo_fail;
			}
		}
		if (bt_power_pdata->bt_vdd_pa) {
			rc = bt_configure_vreg(bt_power_pdata->bt_vdd_pa);
			if (rc < 0) {
				BT_PWR_ERR("bt_power vddpa config failed");
				goto vdd_pa_fail;
			}
		}
		if (bt_power_pdata->bt_chip_pwd) {
			rc = bt_configure_vreg(bt_power_pdata->bt_chip_pwd);
			if (rc < 0) {
				BT_PWR_ERR("bt_power vddldo config failed");
				goto chip_pwd_fail;
			}
		}
		if (bt_power_pdata->bt_gpio_sys_rst) {
			rc = bt_configure_gpios(on);
			if (rc < 0) {
				BT_PWR_ERR("bt_power gpio config failed");
				goto gpio_fail;
			}
		}
	} else {
		bt_configure_gpios(on);
gpio_fail:
		if (bt_power_pdata->bt_gpio_sys_rst)
			gpio_free(bt_power_pdata->bt_gpio_sys_rst);
		bt_vreg_disable(bt_power_pdata->bt_chip_pwd);
chip_pwd_fail:
		bt_vreg_disable(bt_power_pdata->bt_vdd_pa);
vdd_pa_fail:
		bt_vreg_disable(bt_power_pdata->bt_vdd_ldo);
vdd_ldo_fail:
		bt_vreg_disable(bt_power_pdata->bt_vdd_io);
	}

out:
	return rc;
}

Exemple #2

Fichier : bluetooth-power.c Projet : AndroidGX/SimpleGX-L-5.0.2_BOD6_G901F

static int bluetooth_power(int on)
{
	int rc = 0;

	BT_PWR_INFO("on: %d", on);

	if (on) {
		if (bt_power_pdata->bt_vdd_io) {
			rc = bt_configure_vreg(bt_power_pdata->bt_vdd_io);
			if (rc < 0) {
				BT_PWR_ERR("bt_power vddio config failed");
				goto out;
			}
		}
		if (bt_power_pdata->bt_vdd_pa) {
			rc = bt_configure_vreg(bt_power_pdata->bt_vdd_pa);
			if (rc < 0) {
				BT_PWR_ERR("bt_power vddpa config failed");
				goto vdd_pa_fail;
			}
		}
		if (bt_power_pdata->bt_vdd_ldo) {
#ifdef CONFIG_SEC_LENTIS_PROJECT
			pr_err("%s: system_rev=%d\n", __func__, system_rev);
			if(system_rev == 7) {
				bt_power_pdata->bt_vdd_ldo->low_vol_level = EXT_LDO_1_20_V_MIN;
				bt_power_pdata->bt_vdd_ldo->high_vol_level = EXT_LDO_1_20_V_MAX;
			} else if(system_rev > 7) {
				bt_power_pdata->bt_vdd_ldo->low_vol_level = EXT_LDO_1_18_V_MIN;
				bt_power_pdata->bt_vdd_ldo->high_vol_level = EXT_LDO_1_18_V_MAX;
			} else {
				BT_PWR_ERR("bt_power HW rev under 0x06");
			}
#endif
			rc = bt_configure_vreg(bt_power_pdata->bt_vdd_ldo);
			if (rc < 0) {
				BT_PWR_ERR("bt_power vddldo config failed");
				goto vdd_ldo_fail;
			}
		}
		if (bt_power_pdata->bt_chip_pwd) {
			rc = bt_configure_vreg(bt_power_pdata->bt_chip_pwd);
			if (rc < 0) {
				BT_PWR_ERR("bt_power vddldo config failed");
				goto chip_pwd_fail;
			}
		}
		if (bt_power_pdata->bt_gpio_sys_rst) {
			rc = bt_configure_gpios(on);
			if (rc < 0) {
				BT_PWR_ERR("bt_power gpio config failed");
				goto gpio_fail;
			}
		}
	} else {
		bt_configure_gpios(on);
gpio_fail:
		if (bt_power_pdata->bt_gpio_sys_rst)
			gpio_free(bt_power_pdata->bt_gpio_sys_rst);
		bt_vreg_disable(bt_power_pdata->bt_chip_pwd);
chip_pwd_fail:
		bt_vreg_disable(bt_power_pdata->bt_vdd_pa);
vdd_pa_fail:
		bt_vreg_disable(bt_power_pdata->bt_vdd_ldo);
vdd_ldo_fail:
		bt_vreg_disable(bt_power_pdata->bt_vdd_io);
	}

out:
	return rc;
}