Exemple #1
0
static void ephemeris_new(ephemeris_t *e)
{
  gps_time_t t = get_current_time();
  if (!ephemeris_good(&es[e->sid.sat], t)) {
    /* Our currently used ephemeris is bad, so we assume this is better. */
    log_info("New untrusted ephemeris for PRN %02d", e->sid.sat+1);
    chMtxLock(&es_mutex);
    es[e->sid.sat] = es_candidate[e->sid.sat] = *e;
    chMtxUnlock();

  } else if (ephemeris_equal(&es_candidate[e->sid.sat], e)) {
    /* The received ephemeris matches our candidate, so we trust it. */
    log_info("New trusted ephemeris for PRN %02d", e->sid.sat+1);
    chMtxLock(&es_mutex);
    es[e->sid.sat] = *e;
    chMtxUnlock();
  } else {
    /* This is our first reception of this new ephemeris, so treat it with
     * suspicion and call it the new candidate. */
    log_info("New ephemeris candidate for PRN %02d", e->sid.sat+1);
    chMtxLock(&es_mutex);
    es_candidate[e->sid.sat] = *e;
    chMtxUnlock();
  }
}
Exemple #2
0
bool_t gadcLowSpeedStart(uint32_t physdev, adcsample_t *buffer, GADCCallbackFunction fn, void *param) {
	struct lsdev *p;

	DoInit();

	/* Start the Low Speed Timer */
	chMtxLock(&gadcmutex);
	if (!gtimerIsActive(&LowSpeedGTimer))
		gtimerStart(&LowSpeedGTimer, LowSpeedGTimerCallback, NULL, TRUE, TIME_INFINITE);

	/* Find a slot */
	for(p = ls; p < &ls[GADC_MAX_LOWSPEED_DEVICES]; p++) {
		if (!(p->flags & GADC_FLG_ISACTIVE)) {
			/* We know we have a slot - this should never wait anyway */
			chSemWaitTimeout(&gadcsem, TIME_IMMEDIATE);
			p->lld.physdev = physdev;
			p->lld.buffer = buffer;
			p->fn = fn;
			p->param = param;
			p->flags = GADC_FLG_ISACTIVE;
			chMtxUnlock();
			StartADC(FALSE);
			return TRUE;
		}
	}
	chMtxUnlock();
	return FALSE;
}
Exemple #3
0
static void rawd_new(struct netconn *nc)
{
	int i;
	int free = -1;

	chMtxLock(&rawd_mutex);

	/* check for existing connections */
	for (i = 0; i < NC_COUNT; i++) {
		if (ncs[i] == NULL) {
			free = i;
		} else if (ncs[i]->pcb.tcp->state != ESTABLISHED) {
			/* kill stale connections */
			netconn_close(ncs[i]);
			netconn_delete(ncs[i]);
			ncs[i] = NULL;
			free = i;
		}
	}

	if (free < 0) {
		netconn_write(nc, RAWD_FULL, sizeof(RAWD_FULL) - 1, NETCONN_COPY);
		netconn_close(nc);
		netconn_delete(nc);
		chMtxUnlock();
		return;
	}

	ncs[free] = nc;

	chMtxUnlock();

	netconn_write(nc, RAWD_READY, sizeof(RAWD_READY) - 1, NETCONN_COPY);
}
Exemple #4
0
/**
 * Uart transmit buffer implementation
 */
void uart_put_buffer(struct uart_periph *p, long fd, const uint8_t *data, uint16_t len)
{
  struct SerialInit *init_struct = (struct SerialInit*)(p->init_struct);
  if (fd == 0) {
    // if fd is zero, assume the driver is not already locked
    // and available space should be checked
    chMtxLock(init_struct->tx_mtx);
    int16_t space = p->tx_extract_idx - p->tx_insert_idx;
    if (space <= 0) {
      space += UART_TX_BUFFER_SIZE;
    }
    if ((uint16_t)(space - 1) < len) {
      chMtxUnlock(init_struct->tx_mtx);
      return;  // no room
    }
  }
  // insert data into buffer
  int i;
  for (i = 0; i < len; i++) {
    p->tx_buf[p->tx_insert_idx] = data[i];
    p->tx_insert_idx = (p->tx_insert_idx + 1) % UART_TX_BUFFER_SIZE;
  }
  // unlock if needed
  if (fd == 0) {
    chMtxUnlock(init_struct->tx_mtx);
    // send signal to start transmission
    chSemSignal (init_struct->tx_sem);
  }
}
Exemple #5
0
uint8_t cmp_lists(uint16_t leaf, void *buf, uint8_t length)
{
    chMtxLock(&tree_mtx);
    uint16_t b = memory_get_ids_head(leaf);
    if (b == NO_BUCKET) {
        chMtxUnlock();
        return 0;
    }
    uint64_t hash = BUCKET_READ_FIELD(b, type.id, 64);
    uint8_t nb_to_send = 0;

    unsigned int i = 0;
    while(b != NO_NEXT && i < length)
        if(hash == ((uint64_t *) buf)[i+1]) {
            b = BUCKET_READ_FIELD(b, next_id, 16);
            i++;
        } else if(BUCKET_READ_FIELD(b, type.id, 64) < ((uint64_t *) buf)[i+1]){
            i++;
        } else {
            ((uint16_t *) buf)[nb_to_send++] = b;
            b = BUCKET_READ_FIELD(b, next_id, 16);
        }

    while(b != NO_NEXT) {
        ((uint16_t *) buf)[nb_to_send++] = b;
        b = BUCKET_READ_FIELD(b, next_id, 16);
    }

    chMtxUnlock();
    return nb_to_send;
}
Exemple #6
0
uint16_t tree_insert(struct Bucket *b)
{
    chMtxLock(&tree_mtx);
    uint16_t id = place_message(b);
    if(id == MEM_FULL) {
        chMtxUnlock();
        return MEM_FULL;
    }
    update_branch(id);
    chMtxUnlock();
    return id;
}
static THD_FUNCTION(thread11, p) {

  chMtxLock(&m2);
  chMtxLock(&m1);
#if CH_CFG_USE_CONDVARS_TIMEOUT || defined(__DOXYGEN__)
  chCondWaitTimeout(&c1, TIME_INFINITE);
#else
  chCondWait(&c1);
#endif
  test_emit_token(*(char *)p);
  chMtxUnlock(&m1);
  chMtxUnlock(&m2);
}
Exemple #8
0
void motor_beep(int frequency, int duration_msec)
{
	chMtxLock(&_mutex);

	if (motor_rtctl_get_state() == MOTOR_RTCTL_STATE_IDLE) {
		_state.beep_frequency = frequency;
		_state.beep_duration_msec = duration_msec;
		chMtxUnlock();
		chEvtBroadcastFlags(&_setpoint_update_event, ALL_EVENTS); // Wake the control thread
	} else {
		chMtxUnlock();
	}
}
/* Low priority thread */
static THD_FUNCTION(thread3L, p) {

  (void)p;
  chThdSleepMilliseconds(10);
  chMtxLock(&m2);
  test_cpu_pulse(20);
  chMtxLock(&m1);
  test_cpu_pulse(10);
  chMtxUnlock(&m1);
  test_cpu_pulse(10);
  chMtxUnlock(&m2);
  test_emit_token('D');
}
Exemple #10
0
/* Low priority thread */
static msg_t thread3L(void *p) {

  (void)p;
  chThdSleepMilliseconds(10);
  chMtxLock(&m2);
  test_cpu_pulse(20);
  chMtxLock(&m1);
  test_cpu_pulse(10);
  chMtxUnlock();
  test_cpu_pulse(10);
  chMtxUnlock();
  test_emit_token('D');
  return 0;
}
Exemple #11
0
void geventSendEvent(GSourceListener *psl) {
	chMtxLock(&geventMutex);
	if (psl->pListener->callback) {				// This test needs to be taken inside the mutex
		chMtxUnlock();
		// We already know we have the event lock
		psl->pListener->callback(psl->pListener->param, &psl->pListener->event);

	} else {
		// Wake up the listener
		if (chSemGetCounterI(&psl->pListener->waitqueue) < 0)
			chSemSignal(&psl->pListener->waitqueue);
		chMtxUnlock();
	}
}
Exemple #12
0
static msg_t thread11(void *p) {

  chMtxLock(&m2);
  chMtxLock(&m1);
#if CH_USE_CONDVARS_TIMEOUT || defined(__DOXYGEN__)
  chCondWaitTimeout(&c1, TIME_INFINITE);
#else
  chCondWait(&c1);
#endif
  test_emit_token(*(char *)p);
  chMtxUnlock();
  chMtxUnlock();
  return 0;
}
Exemple #13
0
void toggleLeds( uint32_t arg )
{
    chMtxLock( &mutex );
        value = ( value & ( ~arg ) ) |
                ( (value ^ arg ) & (arg & 0x07) );
    chMtxUnlock();
}
Exemple #14
0
int motor_get_limit_mask(void)
{
	chMtxLock(&_mutex);
	int ret = _state.limit_mask;
	chMtxUnlock();
	return ret;
}
Exemple #15
0
	bool_t gdispInit(void) {
		bool_t		res;
		unsigned	i;

		/* Mark all the Messages as free */
		for(i=0; i < GDISP_QUEUE_SIZE; i++)
			gdispMsgs[i].action = GDISP_LLD_MSG_NOP;

		/* Initialise our Mailbox, Mutex's and Counting Semaphore.
		 * 	A Mutex is required as well as the Mailbox and Thread because some calls have to be synchronous.
		 *	Synchronous calls get handled by the calling thread, asynchronous by our worker thread.
		 */
		chMBInit(&gdispMailbox, gdispMailboxQueue, sizeof(gdispMailboxQueue)/sizeof(gdispMailboxQueue[0]));
		chMtxInit(&gdispMutex);
		chMtxInit(&gdispMsgsMutex);
		chSemInit(&gdispMsgsSem, GDISP_QUEUE_SIZE);

		lldThread = chThdCreateStatic(waGDISPThread, sizeof(waGDISPThread), NORMALPRIO, GDISPThreadHandler, NULL);

		/* Initialise driver - synchronous */
		chMtxLock(&gdispMutex);
		res = gdisp_lld_init();
		chMtxUnlock();

		return res;
	}
Exemple #16
0
static msg_t clarityMgmtResponseMonitoringThd(void *arg)
{
    uint32_t attempts = 0;

    (void)arg;
    
    #if CH_USE_REGISTRY == TRUE
    chRegSetThreadName(__FUNCTION__);
    #endif

    while (chThdShouldTerminate() == FALSE)
    {
        if (chMtxTryLock(cc3000Mtx) == TRUE)
        {
            chMtxUnlock();
            attempts = 0;
        }
        else 
        {
            attempts++;
            if (attempts == CC3000_MUTEX_POLL_COUNT)
            {
                unresponsiveCb();
            }
        }

        chThdSleep(MS2ST(CC3000_MUTEX_POLL_TIME_MS));
    }
    return CLARITY_SUCCESS;
}
Exemple #17
0
void state( uint8_t index, uint32_t * val )
{
    // Mutex protected.
    chMtxLock( &mutex );
    *val = ins[index];
    chMtxUnlock();
}
static THD_FUNCTION(thread4b, p) {

  (void)p;
  chThdSleepMilliseconds(150);
  chMtxLock(&m1);
  chMtxUnlock(&m1);
}
Exemple #19
0
bool motor_is_idle(void)
{
	chMtxLock(&_mutex);
	bool ret = motor_rtctl_get_state() == MOTOR_RTCTL_STATE_IDLE;
	chMtxUnlock();
	return ret;
}
Exemple #20
0
void sc_extint_clear(ioportid_t port, uint8_t pin)
{
  uint8_t need_stop = 1;
  uint8_t i;
  EXTChannelConfig cfg;

  (void)port;

  chMtxLock(&cfg_mtx);

  chDbgAssert(pin < EXT_MAX_CHANNELS , "EXT pin number outside range");
  chDbgAssert(extcfg.channels[pin].cb != NULL,
              "EXT pin cb not registered");

  // FIXME: should check that port matches as well?

  cfg.cb = NULL;
  cfg.mode = EXT_CH_MODE_DISABLED;

  extSetChannelMode(&EXTD1, pin, &cfg);

  for (i = 0; i < EXT_MAX_CHANNELS; ++i) {
    if (extcfg.channels[pin].cb != NULL) {
      need_stop = 0;
      break;
    }
  }

  if (need_stop) {
    extStop(&EXTD1);
  }

  chMtxUnlock(&cfg_mtx);
}
Exemple #21
0
int motor_test_motor(void)
{
	chMtxLock(&_mutex);
	const int res = motor_rtctl_test_motor();
	chMtxUnlock();
	return res;
}
Exemple #22
0
bool motor_is_running(void)
{
	chMtxLock(&_mutex);
	bool ret = motor_rtctl_get_state() == MOTOR_RTCTL_STATE_RUNNING;
	chMtxUnlock();
	return ret;
}
Exemple #23
0
static msg_t thread1(void *p) {

  chMtxLock(&m1);
  test_emit_token(*(char *)p);
  chMtxUnlock();
  return 0;
}
Exemple #24
0
enum motor_control_mode motor_get_control_mode(void)
{
	chMtxLock(&_mutex);
	enum motor_control_mode ret = _state.mode;
	chMtxUnlock();
	return ret;
}
Exemple #25
0
void setOutput( uint8_t index, uint32_t * val )
{
    // Mutex protected.
    chMtxLock( &mutex );
    pendOuts[index] = *val;
    chMtxUnlock();
}
Exemple #26
0
static msg_t OscAutosendThread(void *arg)
{
  UNUSED(arg);
  uint8_t i;
  const OscNode* node;
  OscChannelData* chd;

  while (!chThdShouldTerminate()) {
    if (osc.autosendDestination == NONE) {
      sleep(250);
    }
    else {
      chd = oscGetChannelByType(osc.autosendDestination);
      i = 0;
      node = oscRoot.children[i++];
      chMtxLock(&chd->lock);
      while (node != 0) {
        if (node->autosender != 0)
          node->autosender(osc.autosendDestination);
        node = oscRoot.children[i++];
      }
      oscSendPendingMessages(osc.autosendDestination);
      chMtxUnlock();
      sleep(osc.autosendPeriod);
    }
  }
  return 0;
}
Exemple #27
0
void clarityCC3000ApiUnlock(void)
{
    if (cc3000Mtx != NULL)
    {
        chMtxUnlock();
    }
}
Exemple #28
0
static msg_t ledsThread( void *arg )
{
    (void)arg;
    chRegSetThreadName( "ld" );
    while ( 1 )
    {
        static uint32_t arg;
    	chMtxLock( &mutex );
            arg = value;
            if ( arg & 1 )
                palTogglePad( LED_0_PORT, LED_0_PIN );
            else
            	palClearPad( LED_0_PORT, LED_0_PIN );

            if ( arg & 2 )
                palTogglePad( LED_1_PORT, LED_1_PIN );
            else
            	palClearPad( LED_1_PORT, LED_1_PIN );
        chMtxUnlock();
        chThdSleepMilliseconds( DURATION_MS );
    	processDfu( DURATION_MS );
    }

    return 0;
}
static THD_FUNCTION(thread10, p) {

  chMtxLock(&m1);
  chCondWait(&c1);
  test_emit_token(*(char *)p);
  chMtxUnlock(&m1);
}
Exemple #30
0
bool motor_is_blocked(void)
{
	chMtxLock(&_mutex);
	bool ret = _state.num_unexpected_stops >= _params.num_unexpected_stops_to_latch;
	chMtxUnlock();
	return ret;
}