void TextAreaOverlayElement::initialise(void)
{
if (!mInitialised)
{
// Set up the render op
// Combine positions and texture coords since they tend to change together
// since character sizes are different
mRenderOp.vertexData = OGRE_NEW VertexData();
VertexDeclaration* decl = mRenderOp.vertexData->vertexDeclaration;
size_t offset = 0;
// Positions
decl->addElement(POS_TEX_BINDING, offset, VET_FLOAT3, VES_POSITION);
offset += VertexElement::getTypeSize(VET_FLOAT3);
// Texcoords
decl->addElement(POS_TEX_BINDING, offset, VET_FLOAT2, VES_TEXTURE_COORDINATES, 0);
// Colours - store these in a separate buffer because they change less often
decl->addElement(COLOUR_BINDING, 0, VET_COLOUR, VES_DIFFUSE);
mRenderOp.operationType = RenderOperation::OT_TRIANGLE_LIST;
mRenderOp.useIndexes = false;
mRenderOp.vertexData->vertexStart = 0;
mRenderOp.useGlobalInstancingVertexBufferIsAvailable = false;
// Vertex buffer will be created in checkMemoryAllocation
mRenderOp.srcRenderable = this;
checkMemoryAllocation( DEFAULT_INITIAL_CHARS );
mInitialised = true;
}
}
// process configuration file
int readSearchSpecFile(struct scalpelState *state) {
int lineNumber = 0, status;
FILE *f;
char *buffer = (char *) malloc(
(NUM_SEARCH_SPEC_ELEMENTS * MAX_STRING_LENGTH + 1) * sizeof(char));
checkMemoryAllocation(state, buffer, __LINE__, __FILE__, "buffer");
f = fopen(state->conffile, "r");
if (f == NULL ) {
fprintf(stderr,
"ERROR: Couldn't open configuration file:\n%s -- %s\n",
state->conffile, strerror(errno));
free(buffer);
buffer = NULL;
return SCALPEL_ERROR_FATAL_READ;
}
while (fgets(buffer, NUM_SEARCH_SPEC_ELEMENTS * MAX_STRING_LENGTH, f)) {
lineNumber++;
if (state->specLines > MAX_FILE_TYPES) {
fprintf(stderr, "Your conf file contains too many file types.\n");
fprintf(stderr,
"This version was compiled with MAX_FILE_TYPES == %d.\n",
MAX_FILE_TYPES);
fprintf(stderr,"Increase MAX_FILE_TYPES, recompile, and try again.\n");
free(buffer);
buffer = NULL;
return SCALPEL_ERROR_TOO_MANY_TYPES;
}
if ((status = processSearchSpecLine(state, buffer, lineNumber))
!= SCALPEL_OK) {
free(buffer);
buffer = NULL;
return status;
}
}
// add an empty object to the end of the list as a marker
state->SearchSpec[state->specLines].suffix = NULL;
state->SearchSpec[state->specLines].casesensitive = 0;
state->SearchSpec[state->specLines].length = 0;
state->SearchSpec[state->specLines].begin = NULL;
state->SearchSpec[state->specLines].beginlength = 0;
state->SearchSpec[state->specLines].end = NULL;
state->SearchSpec[state->specLines].endlength = 0;
// GGRIII: offsets field is uninitialized--it doesn't
// matter, since we won't use this entry.
fclose(f);
free(buffer);
buffer = NULL;
return SCALPEL_OK;
}
void TextAreaOverlayElement::updatePositionGeometry()
{
float *pVert;
if (mFont.isNull())
{
// not initialised yet, probably due to the order of creation in a template
return;
}
size_t charlen = mCaption.size();
checkMemoryAllocation( charlen );
mRenderOp.vertexData->vertexCount = charlen * 6;
// Get position / texcoord buffer
const HardwareVertexBufferSharedPtr& vbuf =
mRenderOp.vertexData->vertexBufferBinding->getBuffer(POS_TEX_BINDING);
pVert = static_cast<float*>(
vbuf->lock(HardwareBuffer::HBL_DISCARD, Root::getSingleton().getFreqUpdatedBuffersUploadOption()) );
float largestWidth = 0;
float left = _getDerivedLeft() * 2.0f - 1.0f;
float top = -( (_getDerivedTop() * 2.0f ) - 1.0f );
// Derive space with from a number 0
if(!mSpaceWidthOverridden)
{
mSpaceWidth = mFont->getGlyphAspectRatio(UNICODE_ZERO) * mCharHeight;
}
// Use iterator
DisplayString::iterator i, iend;
iend = mCaption.end();
bool newLine = true;
for( i = mCaption.begin(); i != iend; ++i )
{
if( newLine )
{
Real len = 0.0f;
for( DisplayString::iterator j = i; j != iend; j++ )
{
Font::CodePoint character = OGRE_DEREF_DISPLAYSTRING_ITERATOR(j);
if (character == UNICODE_CR
|| character == UNICODE_NEL
|| character == UNICODE_LF)
{
break;
}
else if (character == UNICODE_SPACE) // space
{
len += mSpaceWidth * 2.0f * mViewportAspectCoef;
}
else
{
len += mFont->getGlyphAspectRatio(character) * mCharHeight * 2.0f * mViewportAspectCoef;
}
}
if( mAlignment == Right )
left -= len;
else if( mAlignment == Center )
left -= len * 0.5f;
newLine = false;
}
Font::CodePoint character = OGRE_DEREF_DISPLAYSTRING_ITERATOR(i);
if (character == UNICODE_CR
|| character == UNICODE_NEL
|| character == UNICODE_LF)
{
left = _getDerivedLeft() * 2.0f - 1.0f;
top -= mCharHeight * 2.0f;
newLine = true;
// Also reduce tri count
mRenderOp.vertexData->vertexCount -= 6;
// consume CR/LF in one
if (character == UNICODE_CR)
{
DisplayString::iterator peeki = i;
peeki++;
if (peeki != iend && OGRE_DEREF_DISPLAYSTRING_ITERATOR(peeki) == UNICODE_LF)
{
i = peeki; // skip both as one newline
// Also reduce tri count
mRenderOp.vertexData->vertexCount -= 6;
}
}
continue;
}
else if (character == UNICODE_SPACE) // space
{
// Just leave a gap, no tris
left += mSpaceWidth * 2.0f * mViewportAspectCoef;
// Also reduce tri count
mRenderOp.vertexData->vertexCount -= 6;
continue;
}
Real horiz_height = mFont->getGlyphAspectRatio(character) * mViewportAspectCoef ;
const Font::UVRect& uvRect = mFont->getGlyphTexCoords(character);
// each vert is (x, y, z, u, v)
//-------------------------------------------------------------------------------------
// First tri
//
// Upper left
*pVert++ = left;
*pVert++ = top;
*pVert++ = -1.0;
*pVert++ = uvRect.left;
*pVert++ = uvRect.top;
top -= mCharHeight * 2.0f;
// Bottom left
*pVert++ = left;
*pVert++ = top;
*pVert++ = -1.0;
*pVert++ = uvRect.left;
*pVert++ = uvRect.bottom;
top += mCharHeight * 2.0f;
left += horiz_height * mCharHeight * 2.0f;
// Top right
*pVert++ = left;
*pVert++ = top;
*pVert++ = -1.0;
*pVert++ = uvRect.right;
*pVert++ = uvRect.top;
//-------------------------------------------------------------------------------------
//-------------------------------------------------------------------------------------
// Second tri
//
// Top right (again)
*pVert++ = left;
*pVert++ = top;
*pVert++ = -1.0;
*pVert++ = uvRect.right;
*pVert++ = uvRect.top;
top -= mCharHeight * 2.0f;
left -= horiz_height * mCharHeight * 2.0f;
// Bottom left (again)
*pVert++ = left;
*pVert++ = top;
*pVert++ = -1.0;
*pVert++ = uvRect.left;
*pVert++ = uvRect.bottom;
left += horiz_height * mCharHeight * 2.0f;
// Bottom right
*pVert++ = left;
*pVert++ = top;
*pVert++ = -1.0;
*pVert++ = uvRect.right;
*pVert++ = uvRect.bottom;
//-------------------------------------------------------------------------------------
// Go back up with top
top += mCharHeight * 2.0f;
float currentWidth = (left + 1)/2 - _getDerivedLeft();
if (currentWidth > largestWidth)
{
largestWidth = currentWidth;
}
}
// Unlock vertex buffer
vbuf->unlock();
if (mMetricsMode == GMM_PIXELS)
{
// Derive parametric version of dimensions
Real vpWidth;
vpWidth = (Real) (OverlayManager::getSingleton().getViewportWidth());
largestWidth *= vpWidth;
};
if (getWidth() < largestWidth)
setWidth(largestWidth);
}
// Returns TRUE if the directory exists and is empty.
// If the directory does not exist, an attempt is made to
// create it. On error, returns FALSE
int outputDirectoryOK(char *dir) {
DIR *temp;
struct dirent *entry;
int i;
mode_t newDirectoryMode;
if((temp = opendir(dir)) == NULL) {
// If the directory doesn't exist (ENOENT), we will create it
if(errno == ENOENT) {
// The directory mode values come from the chmod(2) man page
#ifdef __MINGW32__
newDirectoryMode = 0;
if(mkdir(dir)) {
#else
newDirectoryMode = (S_IRUSR | S_IWUSR | S_IXUSR |
S_IRGRP | S_IWGRP | S_IXGRP | S_IROTH | S_IWOTH);
if(mkdir(dir, newDirectoryMode)) {
#endif
fprintf(stderr,
"An error occured while trying to create %s - %s\n",
dir, strerror(errno));
return FALSE;
}
// try to open directory
if((temp = opendir(dir)) == NULL) {
fprintf(stderr,
"An error occured while trying to open %s - %s\n", dir,
strerror(errno));
return FALSE;
}
}
else {
fprintf(stderr, "An error occured while trying to open %s - %s\n",
dir, strerror(errno));
return FALSE;
}
}
// verify directory is empty--there should be only two entries,
// "." and ".."
i = 0;
while ((entry = readdir(temp))) {
if(i > 1) {
return FALSE;
}
i++;
}
closedir(temp);
return TRUE;
}
// open audit file and add initial entries
int openAuditFile(struct scalpelState *state) {
time_t now = time(NULL);
char *timestring = ctime(&now);
char fn[MAX_STRING_LENGTH];
char *buf;
int err = SCALPEL_OK;
buf = (char *)malloc(NUM_SEARCH_SPEC_ELEMENTS * MAX_STRING_LENGTH);
checkMemoryAllocation(state, buf, __LINE__, __FILE__, "buf");
if(!outputDirectoryOK(state->outputdirectory)) {
err = SCALPEL_ERROR_NONEMPTY_DIRECTORY;
goto out;
}
snprintf(fn, MAX_STRING_LENGTH, "%s/audit.txt", state->outputdirectory);
FILE *f;
if(!(state->auditFile = fopen(fn, "w"))) {
fprintf(stderr, "Couldn't open audit file\n%s -- %s\n", fn,
strerror(errno));
err = SCALPEL_ERROR_FATAL_READ;
goto out;
}
fprintf(state->auditFile,
"\nScalpel version %s audit file\n"
"Started at %sCommand line:\n%s\n\n"
"Output directory: %s\n"
"Configuration file: %s\n",
SCALPEL_VERSION, timestring, state->invocation,
state->outputdirectory, state->conffile);
// copy config file into audit log
f = fopen(state->conffile, "r");
if(f == NULL) {
fprintf(stderr,
"ERROR: Couldn't open configuration file:\n%s -- %s\n",
state->conffile, strerror(errno));
err = SCALPEL_ERROR_FATAL_READ;
goto out;
}
fprintf(state->auditFile, "\n------ BEGIN COPY OF CONFIG FILE USED ------\n");
while (fgets(buf, NUM_SEARCH_SPEC_ELEMENTS * MAX_STRING_LENGTH, f)) {
fprintf(state->auditFile, "%s", buf);
}
fprintf(state->auditFile, "------ END COPY OF CONFIG FILE USED ------\n\n");
fclose(f);
out:
free(buf);
return err;
}
// Return the remaining size, in bytes, of an open file stream. On
// error, return -1. Handling raw device files is substantially more
// complicated than image files. For Linux, an ioctl() is used. For
// other operating systems, a "binary search" technique similar to
// that in e2fsprogs getsize.c is used.
long long measureOpenFile(FILE * f, struct scalpelState *state) {
unsigned long long total = 0, original = ftello(f);
int descriptor = 0;
struct stat *info;
unsigned long long numsectors = 0;
if((fseeko(f, 0, SEEK_END))) {
if(state->modeVerbose) {
fprintf(stdout, "fseeko() call failed on image file.\n");
fprintf(stdout, "Diagnosis: %s\n", strerror(errno));
}
return -1;
}
total = ftello(f);
// for block devices (e.g., raw disk devices), calculating size by
// seeking the end of the opened stream doesn't work. For Linux, we use
// an ioctl() call. For others (e.g., OS X), we use binary search.
// is it a block device?
descriptor = fileno(f);
info = (struct stat *)malloc(sizeof(struct stat));
checkMemoryAllocation(state, info, __LINE__, __FILE__, "info");
fstat(descriptor, info);
if(S_ISBLK(info->st_mode)) {
#if defined (__linux)
if(ioctl(descriptor, BLKGETSIZE, &numsectors) < 0) {
if(state->modeVerbose) {
fprintf(stdout, "Using ioctl() call to measure block device size.\n");
}
#if defined(__DEBUG)
perror("BLKGETSIZE failed");
#endif
}
#else // non-Linux, use binary search
{
unsigned long long low, high, mid;
fprintf(stdout, "Using binary search to measure block device size.\n");
low = 0;
for(high = 512; valid_offset(descriptor, high); high *= 2) {
low = high;
}
while (low < high - 1) {
mid = (low + high) / 2;
if(valid_offset(descriptor, mid)) {
low = mid;
}
else {
high = mid;
}
}
numsectors = (low + 1) >> 9;
}
#endif
// assume device has 512 byte sectors
total = numsectors * 512;
free(info);
}
// restore file position
if((fseeko(f, original, SEEK_SET))) {
if(state->modeVerbose) {
fprintf(stdout,
"fseeko() call to restore file position failed on image file.\n");
}
return -1;
}
return (total - original);
}
int extractSearchSpecData(struct scalpelState *state,
struct SearchSpecLine *s,
char **tokenarray) {
int err = 0;
// process one line from config file:
// token[0] = suffix
// token[1] = case sensitive?
// token[2] = maximum carve size
// token[3] = begintag
// token[4] = endtag
// token[5] = search type (optional)
s->suffix = (char *) malloc(MAX_SUFFIX_LENGTH * sizeof(char));
checkMemoryAllocation(state, s->suffix, __LINE__, __FILE__, "s->suffix");
s->begin = (char *) malloc(MAX_STRING_LENGTH * sizeof(char));
checkMemoryAllocation(state, s->begin, __LINE__, __FILE__, "s->begin");
s->end = (char *) malloc(MAX_STRING_LENGTH * sizeof(char));
checkMemoryAllocation(state, s->end, __LINE__, __FILE__, "s->end");
s->begintext = (char *) malloc(MAX_STRING_LENGTH * sizeof(char));
checkMemoryAllocation(state, s->begintext, __LINE__, __FILE__,
"s->begintext");
s->endtext = (char *) malloc(MAX_STRING_LENGTH * sizeof(char));
checkMemoryAllocation(state, s->endtext, __LINE__, __FILE__, "s->endtext");
if (!strncasecmp(tokenarray[0], SCALPEL_NOEXTENSION_SUFFIX,
strlen(SCALPEL_NOEXTENSION_SUFFIX))) {
s->suffix[0] = SCALPEL_NOEXTENSION;
s->suffix[1] = 0;
} else {
memcpy(s->suffix, tokenarray[0], MAX_SUFFIX_LENGTH);
}
// case sensitivity check
s->casesensitive = (!strncasecmp(tokenarray[1], "y", 1)
|| !strncasecmp(tokenarray[1], "yes", 3));
//#ifdef _WIN32
// s->length = _atoi64(tokenarray[2]);
//#else
// s->length = atoull(tokenarray[2]);
//#endif
char split[MAX_STRING_LENGTH];
char *maxcarvelength;
strcpy(split, tokenarray[2]);
maxcarvelength = strchr(split, ':');
if (!maxcarvelength) {
s->minlength = 0;
s->length = strtoull(split, 0, 10);
} else {
*maxcarvelength = 0;
maxcarvelength++;
s->minlength = strtoull(split, 0, 10);
s->length = strtoull(maxcarvelength, 0, 10);
}
// determine search type for this needle
s->searchtype = SEARCHTYPE_FORWARD;
if (!strncasecmp(tokenarray[5], "REVERSE", strlen("REVERSE"))) {
s->searchtype = SEARCHTYPE_REVERSE;
} else if (!strncasecmp(tokenarray[5], "NEXT", strlen("NEXT"))) {
s->searchtype = SEARCHTYPE_FORWARD_NEXT;
}
// FORWARD is the default, but OK if the user defines it explicitly
else if (!strncasecmp(tokenarray[5], "FORWARD", strlen("FORWARD"))) {
s->searchtype = SEARCHTYPE_FORWARD;
}
// regular expressions must be handled separately
if (isRegularExpression(tokenarray[3])) {
#ifdef GPU_THREADING
// GPU execution does not support regex needles.
std::stringstream ss;
ss << "ERROR: GPU search for regex headers is not supported!\n";
ss << "Please modify the config file for non-regex headers only.\n";
std::string msg = ss.str();
fprintf(stderr, msg.c_str());
throw std::runtime_error(msg);
#endif
// copy RE, zap leading/training '/' and prepare for regular expression compilation
s->beginisRE = 1;
strcpy(s->begin, tokenarray[3]);
strcpy(s->begintext, tokenarray[3]);
s->beginlength = strlen(tokenarray[3]);
s->begin[s->beginlength] = 0;
// compile regular expression
err = regncomp(&(s->beginstate.re), s->begin + 1, s->beginlength - 2,
REG_EXTENDED | (REG_ICASE * (!s->casesensitive)));
if (err) {
return SCALPEL_ERROR_BAD_HEADER_REGEX;
}
} else {
// non-regular expression header
s->beginisRE = 0;
strcpy(s->begintext, tokenarray[3]);
s->beginlength = translate(tokenarray[3]);
memcpy(s->begin, tokenarray[3], s->beginlength);
init_bm_table(s->begin, s->beginstate.bm_table, s->beginlength,
s->casesensitive);
}
if (isRegularExpression(tokenarray[4])) {
#ifdef GPU_THREADING
// GPU execution does not support regex needles.
std::stringstream ss;
ss << "ERROR: GPU search for regex footers is not supported!\n";
ss << "Please modify the config file for non-regex footers only.\n";
std::string msg = ss.str();
fprintf(stderr, msg.c_str());
throw std::runtime_error(msg);
#endif
// copy RE, zap leading/training '/' and prepare for for regular expression compilation
s->endisRE = 1;
strcpy(s->end, tokenarray[4]);
strcpy(s->endtext, tokenarray[4]);
s->endlength = strlen(tokenarray[4]);
s->end[s->endlength] = 0;
// compile regular expression
err = regncomp(&(s->endstate.re), s->end + 1, s->endlength - 2,
REG_EXTENDED | (REG_ICASE * (!s->casesensitive)));
if (err) {
return SCALPEL_ERROR_BAD_FOOTER_REGEX;
}
} else {
s->endisRE = 0;
strcpy(s->endtext, tokenarray[4]);
s->endlength = translate(tokenarray[4]);
memcpy(s->end, tokenarray[4], s->endlength);
init_bm_table(s->end, s->endstate.bm_table, s->endlength,
s->casesensitive);
}
return SCALPEL_OK;
}
// initialize state variable and copy command line arguments if passed in (argv can be NULL)
void initializeState(char ** argv, struct scalpelState *state) {
char **argvcopy = argv;
int sss;
int i;
state->inReader = NULL;
// Allocate memory for state
state->inputFileList = (char *) malloc(MAX_STRING_LENGTH * sizeof(char));
checkMemoryAllocation(state, state->inputFileList, __LINE__, __FILE__,
"state->inputFileList");
state->conffile = (char *) malloc(MAX_STRING_LENGTH * sizeof(char));
checkMemoryAllocation(state, state->conffile, __LINE__, __FILE__,
"state->conffile");
state->outputdirectory = (char *) malloc(MAX_STRING_LENGTH * sizeof(char));
checkMemoryAllocation(state, state->conffile, __LINE__, __FILE__,
"state->outputdirectory");
state->invocation = (char *) malloc(MAX_STRING_LENGTH * sizeof(char));
checkMemoryAllocation(state, state->invocation, __LINE__, __FILE__,
"state->invocation");
// GGRIII: memory allocation made more sane, because we're storing
// more information in Scalpel than foremost had to, for each file
// type.
sss = (MAX_FILE_TYPES + 1) * sizeof(struct SearchSpecLine);
state->SearchSpec = (struct SearchSpecLine *) malloc(sss);
memset(state->SearchSpec, 0, sss);
checkMemoryAllocation(state, state->SearchSpec, __LINE__, __FILE__,
"state->SearchSpec");
state->specLines = 0;
// GGRIII: initialize header/footer offset data, carved file count,
// et al. The header/footer database is re-initialized in "dig.c"
// after each image file is processed (numfilestocarve and
// organizeDirNum are not). Storage for the header/footer offsets
// will be reallocated as needed.
for (i = 0; i < MAX_FILE_TYPES; i++) {
state->SearchSpec[i].offsets.headers = 0;
state->SearchSpec[i].offsets.headerlens = 0;
state->SearchSpec[i].offsets.footers = 0;
state->SearchSpec[i].offsets.footerlens = 0;
state->SearchSpec[i].offsets.numheaders = 0;
state->SearchSpec[i].offsets.numfooters = 0;
state->SearchSpec[i].offsets.headerstorage = 0;
state->SearchSpec[i].offsets.footerstorage = 0;
state->SearchSpec[i].numfilestocarve = 0;
state->SearchSpec[i].organizeDirNum = 0;
}
state->fileswritten = 0;
state->skip = 0;
state->organizeMaxFilesPerSub = MAX_FILES_PER_SUBDIRECTORY;
state->modeVerbose = FALSE;
state->modeNoSuffix = FALSE;
state->useInputFileList = FALSE;
state->carveWithMissingFooters = FALSE;
state->noSearchOverlap = FALSE;
state->generateHeaderFooterDatabase = FALSE;
state->updateCoverageBlockmap = FALSE;
state->useCoverageBlockmap = FALSE;
state->coverageblocksize = 0;
state->blockAlignedOnly = FALSE;
state->organizeSubdirectories = TRUE;
state->previewMode = FALSE;
state->handleEmbedded = FALSE;
state->auditFile = NULL;
inputReaderVerbose = FALSE;
// default values for output directory, config file, wildcard character,
// coverage blockmap directory
strncpy(state->outputdirectory, SCALPEL_DEFAULT_OUTPUT_DIR,
strlen(SCALPEL_DEFAULT_OUTPUT_DIR));
strncpy(state->conffile, SCALPEL_DEFAULT_CONFIG_FILE, MAX_STRING_LENGTH);
state->coveragefile = state->outputdirectory;
wildcard = SCALPEL_DEFAULT_WILDCARD;
signal_caught = 0;
state->invocation[0] = 0;
// copy the invocation string into the state
do
{
strncat(state->invocation, *argvcopy,
MAX_STRING_LENGTH - strlen(state->invocation));
strncat(state->invocation, " ",
MAX_STRING_LENGTH - strlen(state->invocation));
++argvcopy;
} while (*argvcopy);
}
int processSearchSpecLine(struct scalpelState *state,
char *buffer,
int lineNumber) {
char *buf = buffer;
char *token;
int i = 0, err = 0, len = strlen(buffer);
// murder CTRL-M (0x0d) characters
// if(buffer[len - 2] == 0x0d && buffer[len - 1] == 0x0a) {
if (len >= 2 && buffer[len - 2] == 0x0d && buffer[len - 1] == 0x0a) {
buffer[len - 2] = buffer[len - 1];
buffer[len - 1] = buffer[len];
}
buf = (char *) skipWhiteSpace(buf);
token = strtok(buf, " \t\n");
// lines beginning with # are comments
if (token == NULL || token[0] == '#') {
return SCALPEL_OK;
}
// allow wildcard to be changed
if (!strncasecmp(token, "wildcard", 9)) {
if ((token = strtok(NULL, " \t\n")) != NULL ) {
translate(token);
} else {
fprintf(stdout,
"Warning: Empty wildcard in configuration file line %d. Ignoring.\n",
lineNumber);
return SCALPEL_OK;
}
if(strlen(token) > 1) {
fprintf(stderr, "Warning: Wildcard can only be one character,"
" but you specified %d characters.\n"
" Using the first character, \"%c\", as the wildcard.\n",
(int)strlen(token), token[0]);
}
wildcard = token[0];
return SCALPEL_OK;
}
char **tokenarray = (char **) malloc(
6 * sizeof(char[MAX_STRING_LENGTH + 1]));
checkMemoryAllocation(state, tokenarray, __LINE__, __FILE__, "tokenarray");
while (token && (i < NUM_SEARCH_SPEC_ELEMENTS)) {
tokenarray[i] = token;
i++;
token = strtok(NULL, " \t\n");
}
switch (NUM_SEARCH_SPEC_ELEMENTS - i) {
case 2:
tokenarray[NUM_SEARCH_SPEC_ELEMENTS - 1] = (char *) "";
tokenarray[NUM_SEARCH_SPEC_ELEMENTS - 2] = (char *) "";
break;
case 1:
tokenarray[NUM_SEARCH_SPEC_ELEMENTS - 1] = (char *) "";
break;
case 0:
break;
default:
fprintf(stderr,
"\nERROR: In line %d of the configuration file, expected %d tokens,\n"
" but instead found only %d.\n",
lineNumber, NUM_SEARCH_SPEC_ELEMENTS, i);
free(tokenarray);
return SCALPEL_ERROR_NO_SEARCH_SPEC;
break;
}
if ((err = extractSearchSpecData(state,
&(state->SearchSpec[state->specLines]), tokenarray))) {
switch (err) {
case SCALPEL_ERROR_BAD_HEADER_REGEX:
fprintf(stderr,
"\nERROR: In line %d of the configuration file, bad regular expression for header.\n",
lineNumber) ;
break;
case SCALPEL_ERROR_BAD_FOOTER_REGEX:
fprintf(stderr,
"\nERROR: In line %d of the configuration file, bad regular expression for footer.\n",
lineNumber);
break;
default:
fprintf(stderr,
"\nERROR: Unknown error on line %d of the configuration file.\n",
lineNumber);
}
}
state->specLines++;
free(tokenarray);
return SCALPEL_OK;
}
