bool PCB_EDIT_FRAME::OnRightClick( const wxPoint& aMousePos, wxMenu* aPopMenu )
{
wxString msg;
int flags = 0;
bool locate_track = false;
bool blockActive = (GetScreen()->m_BlockLocate.m_Command != BLOCK_IDLE);
wxClientDC dc( m_canvas );
BOARD_ITEM* item = GetCurItem();
m_canvas->SetCanStartBlock( -1 ); // Avoid to start a block coomand when clicking on menu
// If a command or a block is in progress:
// Put the Cancel command (if needed) and the End command
if( blockActive )
{
createPopUpBlockMenu( aPopMenu );
aPopMenu->AppendSeparator();
return true;
}
m_canvas->CrossHairOff( &dc );
if( GetToolId() != ID_NO_TOOL_SELECTED )
{
if( item && item->GetFlags() )
{
AddMenuItem( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND, _( "Cancel" ),
KiBitmap( cancel_xpm ) );
}
else
{
AddMenuItem( aPopMenu, ID_POPUP_CLOSE_CURRENT_TOOL,
_( "End Tool" ), KiBitmap( cursor_xpm ) );
}
aPopMenu->AppendSeparator();
}
else
{
if( item && item->GetFlags() )
{
AddMenuItem( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_( "Cancel" ), KiBitmap( cancel_xpm ) );
aPopMenu->AppendSeparator();
}
}
/* Select a proper item */
wxPoint cursorPos = GetScreen()->GetCrossHairPosition();
wxPoint selectPos = m_Collector->GetRefPos();
selectPos = GetScreen()->GetNearestGridPosition( selectPos );
/* We can reselect another item only if there are no item being edited
* because ALL moving functions use GetCurItem(), therefore GetCurItem()
* must return the same item during moving. We know an item is moving
* if( item && (item->m_Flags != 0)) is true and after calling
* PcbGeneralLocateAndDisplay(), GetCurItem() is any arbitrary BOARD_ITEM,
* not the current item being edited. In such case we cannot call
* PcbGeneralLocateAndDisplay().
*/
if( !item || (item->GetFlags() == 0) )
{
// show "item selector" menu only if no item now or selected item was not
// previously picked at this position
if( !item || cursorPos != selectPos )
{
m_canvas->SetAbortRequest( false );
item = PcbGeneralLocateAndDisplay();
if( m_canvas->GetAbortRequest() )
{
m_canvas->CrossHairOn( &dc );
return false;
}
}
}
item = GetCurItem();
if( item )
flags = item->GetFlags();
else
flags = 0;
if( item )
{
switch( item->Type() )
{
case PCB_MODULE_T:
createPopUpMenuForFootprints( (MODULE*) item, aPopMenu );
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
{
aPopMenu->AppendSeparator();
if( !( (MODULE*) item )->IsLocked() )
{
msg = AddHotkeyName( _("Lock Module" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FIXE_MODULE, msg,
KiBitmap( locked_xpm ) );
}
else
{
msg = AddHotkeyName( _( "Unlock Module" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FREE_MODULE, msg,
KiBitmap( unlocked_xpm ) );
}
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOPLACE_CURRENT_MODULE,
_( "Auto Place Module" ) );
}
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_TRACKS ) )
{
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_MODULE, _( "Autoroute Module" ) );
}
break;
case PCB_PAD_T:
createPopUpMenuForFpPads( (D_PAD*) item, aPopMenu );
break;
case PCB_MODULE_TEXT_T:
createPopUpMenuForFpTexts( (TEXTE_MODULE*) item, aPopMenu );
break;
case PCB_LINE_T: // Some graphic items on technical layers
if( (flags & IS_NEW) )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_DRAWING,
_( "End Drawing" ), KiBitmap( apply_xpm ) );
}
if( !flags )
{
msg = AddHotkeyName( _( "Move Drawing" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_DRAWING_REQUEST,
msg, KiBitmap( move_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_DRAWING, _( "Edit Drawing" ),
KiBitmap( edit_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING,
_( "Delete Drawing" ), KiBitmap( delete_xpm ) );
if( item->GetLayer() > LAST_COPPER_LAYER )
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING_LAYER,
_( "Delete All Drawing on Layer" ), KiBitmap( delete_xpm ) );
}
break;
case PCB_ZONE_T: // Item used to fill a zone
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_ZONE,
_( "Delete Zone Filling" ), KiBitmap( delete_xpm ) );
break;
case PCB_ZONE_AREA_T: // Item used to handle a zone area (outlines, holes ...)
if( flags & IS_NEW )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE,
_( "Close Zone Outline" ), KiBitmap( apply_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER,
_( "Delete Last Corner" ), KiBitmap( delete_xpm ) );
}
else
{
createPopUpMenuForZones( (ZONE_CONTAINER*) item, aPopMenu );
}
break;
case PCB_TEXT_T:
createPopUpMenuForTexts( (TEXTE_PCB*) item, aPopMenu );
break;
case PCB_TRACE_T:
case PCB_VIA_T:
locate_track = true;
createPopupMenuForTracks( (TRACK*) item, aPopMenu );
break;
case PCB_MARKER_T:
createPopUpMenuForMarkers( (MARKER_PCB*) item, aPopMenu );
break;
case PCB_DIMENSION_T:
if( !flags )
{
msg = AddHotkeyName( _( "Edit Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_DIMENSION, msg, KiBitmap( edit_xpm ) );
msg = AddHotkeyName( _( "Move Dimension Text" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST,
msg, KiBitmap( move_text_xpm ) );
msg = AddHotkeyName( _( "Delete Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_DELETE );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DIMENSION,
msg, KiBitmap( delete_xpm ) );
}
break;
case PCB_TARGET_T:
if( !flags )
{
msg = AddHotkeyName( _( "Move Target" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_MIRE_REQUEST, msg, KiBitmap( move_xpm ) );
msg = AddHotkeyName( _( "Edit Target" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_MIRE, msg, KiBitmap( edit_xpm ) );
msg = AddHotkeyName( _( "Delete Target" ), g_Board_Editor_Hokeys_Descr, HK_DELETE );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_MIRE,
msg, KiBitmap( delete_xpm ) );
}
break;
case PCB_MODULE_EDGE_T:
case SCREEN_T:
case TYPE_NOT_INIT:
case PCB_T:
msg.Printf( wxT( "PCB_EDIT_FRAME::OnRightClick() Error: unexpected DrawType %d" ),
item->Type() );
wxMessageBox( msg );
SetCurItem( NULL );
break;
default:
msg.Printf( wxT( "PCB_EDIT_FRAME::OnRightClick() Error: unknown DrawType %d" ),
item->Type() );
wxMessageBox( msg );
// Attempt to clear error (but should no occurs )
if( item->Type() >= MAX_STRUCT_TYPE_ID )
SetCurItem( NULL );
break;
}
aPopMenu->AppendSeparator();
}
if( !flags )
{
msg = AddHotkeyName( _( "Get and Move Footprint" ),
g_Board_Editor_Hokeys_Descr, HK_GET_AND_MOVE_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST,
msg, KiBitmap( move_module_xpm ) );
}
/* Display context sensitive commands: */
switch( GetToolId() )
{
case ID_PCB_ZONES_BUTT:
if( GetBoard()->m_ZoneDescriptorList.size() > 0 )
{
aPopMenu->AppendSeparator();
AddMenuItem( aPopMenu, ID_POPUP_PCB_FILL_ALL_ZONES,
_( "Fill or Refill All Zones" ), KiBitmap( fill_zone_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES,
_( "Remove Filled Areas in All Zones" ), KiBitmap( zone_unfill_xpm ) );
aPopMenu->AppendSeparator();
}
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_TRACK_BUTT:
if ( ! locate_track ) // This menu is already added when a track is located
AddMenuItem( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ),
KiBitmap( width_track_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_CU_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair for Vias" ), KiBitmap( select_layer_pair_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_ADD_TEXT_BUTT:
case ID_PCB_ADD_LINE_BUTT:
case ID_PCB_DIMENSION_BUTT:
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_NO_CU_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_PCB_MODULE_BUTT:
AddMenuItem( aPopMenu, ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC,
_( "Footprint Documentation" ), KiBitmap( book_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_NO_TOOL_SELECTED:
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
{
wxMenu* commands = new wxMenu;
AddMenuItem( aPopMenu, commands, ID_POPUP_PCB_AUTOPLACE_COMMANDS,
_( "Glob Move and Place" ), KiBitmap( move_xpm ) );
AddMenuItem( commands, ID_POPUP_PCB_AUTOPLACE_FREE_ALL_MODULES,
_( "Unlock All Modules" ), KiBitmap( unlocked_xpm ) );
AddMenuItem( commands, ID_POPUP_PCB_AUTOPLACE_FIXE_ALL_MODULES,
_( "Lock All Modules" ), KiBitmap( locked_xpm ) );
commands->AppendSeparator();
AddMenuItem( commands, ID_POPUP_PCB_AUTOMOVE_ALL_MODULES,
_( "Move All Modules" ), KiBitmap( move_xpm ) );
commands->Append( ID_POPUP_PCB_AUTOMOVE_NEW_MODULES, _( "Move New Modules" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOPLACE_ALL_MODULES, _( "Autoplace All Modules" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEW_MODULES, _( "Autoplace New Modules" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEXT_MODULE, _( "Autoplace Next Module" ) );
commands->AppendSeparator();
AddMenuItem( commands, ID_POPUP_PCB_REORIENT_ALL_MODULES,
_( "Orient All Modules" ), KiBitmap( rotate_module_pos_xpm ) );
aPopMenu->AppendSeparator();
}
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_TRACKS ) )
{
wxMenu* commands = new wxMenu;
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_COMMANDS, _( "Autoroute" ), commands );
AddMenuItem( commands, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair" ), KiBitmap( select_layer_pair_xpm ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_ALL_MODULES, _( "Autoroute All Modules" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_RESET_UNROUTED, _( "Reset Unrouted" ) );
aPopMenu->AppendSeparator();
}
if( locate_track )
AddMenuItem( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ),
KiBitmap( width_track_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
}
m_canvas->CrossHairOn( &dc );
return true;
}
bool PCB_EDIT_FRAME::OnRightClick( const wxPoint& aMousePos, wxMenu* aPopMenu )
{
wxString msg;
STATUS_FLAGS flags = 0;
bool trackFound = false; // Flag set to true,
// if a track is being the cursor, to avoid
// to display menus relative to tracks twice
bool blockActive = !GetScreen()->m_BlockLocate.IsIdle();
BOARD_ITEM* item = GetCurItem();
m_canvas->SetCanStartBlock( -1 ); // Avoid to start a block command when clicking on menu
// If a command or a block is in progress:
// Put the Cancel command (if needed) and the End command
if( blockActive )
{
createPopUpBlockMenu( aPopMenu );
aPopMenu->AppendSeparator();
return true;
}
if( GetToolId() != ID_NO_TOOL_SELECTED )
{
if( item && item->GetFlags() )
{
AddMenuItem( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND, _( "Cancel" ),
KiBitmap( cancel_xpm ) );
}
else
{
AddMenuItem( aPopMenu, ID_POPUP_CLOSE_CURRENT_TOOL,
_( "End Tool" ), KiBitmap( cursor_xpm ) );
}
aPopMenu->AppendSeparator();
}
else
{
if( item && item->GetFlags() )
{
AddMenuItem( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_( "Cancel" ), KiBitmap( cancel_xpm ) );
aPopMenu->AppendSeparator();
}
}
// Select a proper item
wxPoint cursorPos = GetCrossHairPosition();
wxPoint selectPos = m_Collector->GetRefPos();
selectPos = GetNearestGridPosition( selectPos );
/* We can reselect another item only if there are no item being edited
* because ALL moving functions use GetCurItem(), therefore GetCurItem()
* must return the same item during moving. We know an item is moving
* if( item && (item->m_Flags != 0)) is true and after calling
* PcbGeneralLocateAndDisplay(), GetCurItem() is any arbitrary BOARD_ITEM,
* not the current item being edited. In such case we cannot call
* PcbGeneralLocateAndDisplay().
*/
if( !item || (item->GetFlags() == 0) )
{
// show the "item selector" menu if no item selected or
// if there is a selected item but the mouse has moved
// (therefore a new item is perhaps under the cursor)
if( !item || cursorPos != selectPos )
{
m_canvas->SetAbortRequest( false );
PcbGeneralLocateAndDisplay();
if( m_canvas->GetAbortRequest() )
{
return false;
}
}
}
item = GetCurItem();
flags = item ? item->GetFlags() : 0;
// Add the context menu, which depends on the picked item:
if( item )
{
switch( item->Type() )
{
case PCB_MODULE_T:
createPopUpMenuForFootprints( (MODULE*) item, aPopMenu );
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
{
aPopMenu->AppendSeparator();
if( !( (MODULE*) item )->IsLocked() )
{
msg = AddHotkeyName( _("Lock Footprint" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FIXE_MODULE, msg,
KiBitmap( locked_xpm ) );
}
else
{
msg = AddHotkeyName( _( "Unlock Footprint" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FREE_MODULE, msg,
KiBitmap( unlocked_xpm ) );
}
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOPLACE_CURRENT_MODULE,
_( "Automatically Place Footprint" ) );
}
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_TRACKS ) )
{
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_MODULE,
_( "Automatically Route Footprint" ) );
}
break;
case PCB_PAD_T:
createPopUpMenuForFpPads( static_cast<D_PAD*>( item ), aPopMenu );
break;
case PCB_MODULE_TEXT_T:
createPopUpMenuForFpTexts( static_cast<TEXTE_MODULE*>( item ), aPopMenu );
break;
case PCB_LINE_T: // Some graphic items on technical layers
if( (flags & IS_NEW) )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_DRAWING,
_( "End Drawing" ), KiBitmap( checked_ok_xpm ) );
}
if( !flags )
{
msg = AddHotkeyName( _( "Move Drawing" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_DRAWING_REQUEST,
msg, KiBitmap( move_xpm ) );
msg = AddHotkeyName( _( "Duplicate Drawing" ), g_Board_Editor_Hokeys_Descr,
HK_DUPLICATE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DUPLICATE_ITEM,
msg, KiBitmap( duplicate_line_xpm ) );
msg = AddHotkeyName( _("Move Drawing Exactly" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM_EXACT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_EXACT,
msg, KiBitmap( move_line_xpm ) );
msg = AddHotkeyName( _("Create Drawing Array" ), g_Board_Editor_Hokeys_Descr,
HK_CREATE_ARRAY );
AddMenuItem( aPopMenu, ID_POPUP_PCB_CREATE_ARRAY,
msg, KiBitmap( array_line_xpm ) );
msg = AddHotkeyName( _( "Edit Drawing" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_DRAWING,
msg, KiBitmap( edit_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING,
_( "Delete Drawing" ), KiBitmap( delete_xpm ) );
if( !IsCopperLayer( item->GetLayer() ) )
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING_LAYER,
_( "Delete All Drawings on Layer" ), KiBitmap( delete_xpm ) );
}
break;
case PCB_ZONE_T: // Item used to fill a zone
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_ZONE,
_( "Delete Zone Filling" ), KiBitmap( delete_xpm ) );
break;
case PCB_ZONE_AREA_T: // Item used to handle a zone area (outlines, holes ...)
if( flags & IS_NEW )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE,
_( "Close Zone Outline" ), KiBitmap( checked_ok_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER,
_( "Delete Last Corner" ), KiBitmap( delete_xpm ) );
}
else
{
createPopUpMenuForZones( (ZONE_CONTAINER*) item, aPopMenu );
}
break;
case PCB_TEXT_T:
createPopUpMenuForTexts( (TEXTE_PCB*) item, aPopMenu );
break;
case PCB_TRACE_T:
case PCB_VIA_T:
trackFound = true;
createPopupMenuForTracks( (TRACK*) item, aPopMenu );
break;
case PCB_MARKER_T:
createPopUpMenuForMarkers( (MARKER_PCB*) item, aPopMenu );
break;
case PCB_DIMENSION_T:
if( !flags )
{
msg = AddHotkeyName( _( "Edit Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_DIMENSION, msg, KiBitmap( edit_xpm ) );
msg = AddHotkeyName( _( "Move Dimension Text" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST,
msg, KiBitmap( move_text_xpm ) );
msg = AddHotkeyName( _( "Duplicate Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_DUPLICATE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DUPLICATE_ITEM,
msg, KiBitmap( duplicate_text_xpm ) );
msg = AddHotkeyName( _("Move Dimension Exactly" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM_EXACT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_EXACT,
msg, KiBitmap( move_text_xpm ) );
msg = AddHotkeyName( _( "Delete Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_DELETE );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DIMENSION,
msg, KiBitmap( delete_xpm ) );
}
break;
case PCB_TARGET_T:
if( !flags )
{
msg = AddHotkeyName( _( "Move Target" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_MIRE_REQUEST,
msg, KiBitmap( move_target_xpm ) );
msg = AddHotkeyName( _("Move Target Exactly" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM_EXACT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_EXACT,
msg, KiBitmap( move_target_xpm ) );
msg = AddHotkeyName( _( "Duplicate Target" ), g_Board_Editor_Hokeys_Descr,
HK_DUPLICATE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DUPLICATE_ITEM,
msg, KiBitmap( duplicate_target_xpm ) );
msg = AddHotkeyName( _("Create Target Array" ), g_Board_Editor_Hokeys_Descr,
HK_CREATE_ARRAY );
AddMenuItem( aPopMenu, ID_POPUP_PCB_CREATE_ARRAY,
msg, KiBitmap( array_target_xpm ) );
msg = AddHotkeyName( _( "Edit Target" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_MIRE, msg, KiBitmap( edit_xpm ) );
msg = AddHotkeyName( _( "Delete Target" ), g_Board_Editor_Hokeys_Descr, HK_DELETE );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_MIRE,
msg, KiBitmap( delete_xpm ) );
}
break;
case PCB_MODULE_EDGE_T:
case SCREEN_T:
case TYPE_NOT_INIT:
case PCB_T:
msg.Printf( wxT( "PCB_EDIT_FRAME::OnRightClick() Error: unexpected DrawType %d" ),
item->Type() );
wxMessageBox( msg );
SetCurItem( NULL );
break;
default:
msg.Printf( wxT( "PCB_EDIT_FRAME::OnRightClick() Error: unknown DrawType %d" ),
item->Type() );
wxMessageBox( msg );
// Attempt to clear error (but should no occurs )
if( item->Type() >= MAX_STRUCT_TYPE_ID )
SetCurItem( NULL );
break;
}
aPopMenu->AppendSeparator();
}
if( !flags )
{
msg = AddHotkeyName( _( "Get and Move Footprint" ),
g_Board_Editor_Hokeys_Descr, HK_GET_AND_MOVE_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST,
msg, KiBitmap( move_module_xpm ) );
}
// Display context sensitive commands:
switch( GetToolId() )
{
case ID_PCB_ZONES_BUTT:
if( GetBoard()->m_ZoneDescriptorList.size() > 0 )
{
aPopMenu->AppendSeparator();
msg = AddHotkeyName( _( "Fill or Refill All Zones" ),
g_Board_Editor_Hokeys_Descr, HK_ZONE_FILL_OR_REFILL );
AddMenuItem( aPopMenu, ID_POPUP_PCB_FILL_ALL_ZONES,
msg, KiBitmap( fill_zone_xpm ) );
msg = AddHotkeyName( _( "Remove Filled Areas in All Zones" ),
g_Board_Editor_Hokeys_Descr, HK_ZONE_REMOVE_FILLED );
AddMenuItem( aPopMenu, ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES,
msg, KiBitmap( zone_unfill_xpm ) );
aPopMenu->AppendSeparator();
}
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_PCB_KEEPOUT_AREA_BUTT:
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_TRACK_BUTT:
if ( ! trackFound ) // This menu is already added when a track is located
{
aPopMenu->AppendSeparator();
msg = AddHotkeyName( _( "Begin Track" ),
g_Board_Editor_Hokeys_Descr, HK_ADD_NEW_TRACK );
AddMenuItem( aPopMenu, ID_POPUP_PCB_BEGIN_TRACK,
msg, KiBitmap( add_tracks_xpm ) );
AddMenuItem( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ),
KiBitmap( width_track_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_CU_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair for Vias" ), KiBitmap( select_layer_pair_xpm ) );
aPopMenu->AppendSeparator();
}
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_ADD_TEXT_BUTT:
case ID_PCB_ADD_LINE_BUTT:
case ID_PCB_DIMENSION_BUTT:
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_NO_CU_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_PCB_MODULE_BUTT:
if( !flags )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC,
_( "Footprint Documentation" ), KiBitmap( book_xpm ) );
aPopMenu->AppendSeparator();
}
break;
case ID_NO_TOOL_SELECTED:
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
{
wxMenu* commands = new wxMenu;
AddMenuItem( aPopMenu, commands, ID_POPUP_PCB_AUTOPLACE_COMMANDS,
_( "Global Spread and Place" ), KiBitmap( move_xpm ) );
AddMenuItem( commands, ID_POPUP_PCB_AUTOPLACE_FREE_ALL_MODULES,
_( "Unlock All Footprints" ), KiBitmap( unlocked_xpm ) );
AddMenuItem( commands, ID_POPUP_PCB_AUTOPLACE_FIXE_ALL_MODULES,
_( "Lock All Footprints" ), KiBitmap( locked_xpm ) );
commands->AppendSeparator();
AddMenuItem( commands, ID_POPUP_PCB_SPREAD_ALL_MODULES,
_( "Spread out All Footprints" ), KiBitmap( move_xpm ) );
commands->Append( ID_POPUP_PCB_SPREAD_NEW_MODULES,
_( "Spread out Footprints not Already on Board" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOPLACE_ALL_MODULES,
_( "Automatically Place All Footprints" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEW_MODULES,
_( "Automatically Place New Footprints" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEXT_MODULE,
_( "Automatically Place Next Footprints" ) );
commands->AppendSeparator();
AddMenuItem( commands, ID_POPUP_PCB_REORIENT_ALL_MODULES,
_( "Orient All Footprints" ), KiBitmap( rotate_module_cw_xpm ) );
aPopMenu->AppendSeparator();
}
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_TRACKS ) )
{
wxMenu* commands = new wxMenu;
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_COMMANDS, _( "Autoroute" ), commands );
AddMenuItem( commands, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair" ), KiBitmap( select_layer_pair_xpm ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_ALL_MODULES,
_( "Automatically Route All Footprints" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_RESET_UNROUTED, _( "Reset Unrouted" ) );
aPopMenu->AppendSeparator();
}
if( !trackFound )
{
msg = AddHotkeyName( _( "Begin Track" ), g_Board_Editor_Hokeys_Descr, HK_ADD_NEW_TRACK );
AddMenuItem( aPopMenu, ID_POPUP_PCB_BEGIN_TRACK, msg, KiBitmap( add_tracks_xpm ) );
AddMenuItem( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ),
KiBitmap( width_track_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
}
break;
}
return true;
}
