String alignFunctionCallParams (const String& call, const StringArray& parameters, const int maxLineLength)
{
String result, currentLine (call);
for (int i = 0; i < parameters.size(); ++i)
{
if (currentLine.length() >= maxLineLength)
{
result += currentLine.trimEnd() + newLine;
currentLine = String::repeatedString (" ", call.length()) + parameters[i];
}
else
{
currentLine += parameters[i];
}
if (i < parameters.size() - 1)
currentLine << ", ";
}
return result + currentLine.trimEnd() + ")";
}
void FileUtil::addMapping(Map map) {
qDebug("FileUtil::addMapping()");
QStringList fileContent;
QFile file("mapping.txt");
file.open(QIODevice::ReadOnly);
QString mapLine;
qDebug("FileUtil::addMapping task id: %s", map.task.taskId.toStdString().c_str());
mapLine.append(map.task.taskId);
mapLine.append(" ");
mapLine.append(map.coreProject.id);
mapLine.append(" ");
mapLine.append(map.coreTask.id);
mapLine.append("\n");
qDebug("FileUtil::addMapping line: %s", mapLine.toStdString().c_str());
bool replaced = false;
while (!file.atEnd()) {
QString currentLine(file.readLine());
if (currentLine.startsWith(map.task.taskId)) {
qDebug("FileUtil::addMapping map found, replacing: %s with %s", currentLine.toStdString().c_str(), mapLine.toStdString().c_str());
currentLine = mapLine;
replaced = true;
}
fileContent << currentLine;
}
file.close();
if (!replaced) {
qDebug("FileUtil::addMapping map found, adding line to the end of the file");
fileContent << mapLine;
}
file.open(QIODevice::Truncate | QIODevice::WriteOnly);
QString l;
qDebug("FileUtil::addMapping saving contents to file");
foreach (l, fileContent) {
file.write(l.toStdString().c_str());
}
void UBGraphicsDelegateFrame::mouseMoveEvent(QGraphicsSceneMouseEvent *event)
{
if (None == mCurrentTool)
return;
QLineF move = QLineF(mStartingPoint, event->scenePos());
qreal moveX = move.length() * cos((move.angle() - mAngle) * PI / 180);
qreal moveY = -move.length() * sin((move.angle() - mAngle) * PI / 180);
qreal width = delegated()->boundingRect().width() * mTotalScaleX;
qreal height = delegated()->boundingRect().height() * mTotalScaleY;
if (mOperationMode == Scaling)
{
if(!rotating())
{
mTranslateX = moveX;
// Perform the resize
if (resizingBottomRight())
{
// -----------------------------------------------------
// ! We want to keep the aspect ratio with this resize !
// -----------------------------------------------------
qreal scaleX;
qreal scaleY;
if(!mMirrorX) {
scaleX = (width + moveX) / width;
} else {
scaleX = (width - moveX) / width;
}
if(!mMirrorY) {
scaleY = (height + moveY) / height;
} else {
scaleY = (height - moveY) / height;
}
qreal scaleFactor = (scaleX + scaleY) / 2;
// Do not allow resizing of image size under frame size
if (canResizeBottomRight(width, height, scaleFactor))
{
if (mRespectRatio)
{
mScaleX = scaleFactor;
mScaleY = scaleFactor;
}
else
{
mScaleX = scaleX;
mScaleY = scaleY;
}
}
} else if (resizingLeft() || resizingRight())
{
if(width != 0) {
qreal scaleX = 0.0;
if(resizingLeft()) {
scaleX = (width - moveX) / width;
} else if(resizingRight()) {
scaleX = (width + moveX) / width;
}
if(mDelegate->isFlippable() && qAbs(scaleX) != 0) {
if((qAbs(width * scaleX)) < 2*mFrameWidth) {
bool negative = (scaleX < 0)?true:false;
if(negative) {
if(mMirrorX)
scaleX = 2*mFrameWidth/width;
else
scaleX = -2*mFrameWidth/width;
} else {
scaleX = -1;
mFlippedX = !mFlippedX;
}
}
mScaleX = scaleX;
} else if (scaleX > 1 || (width * scaleX) > 2 * mFrameWidth) {
mScaleX = scaleX;
if(resizingLeft()) {
mTranslateX = moveX;
}
}
}
} else if(resizingTop() || resizingBottom()) {
if(height != 0) {
qreal scaleY = 0.0;
if(resizingTop()) {
scaleY = (height - moveY) / height;
} else if(resizingBottom()) {
scaleY = (height + moveY) / height;
}
if(mDelegate->isFlippable() && qAbs(scaleY) != 0) {
if((qAbs(height * scaleY)) < 2*mFrameWidth) {
bool negative = (scaleY < 0)?true:false;
if(negative) {
if(mMirrorY)
scaleY = 2*mFrameWidth/width;
else
scaleY = -2*mFrameWidth/width;
} else {
scaleY = -1;
mFlippedY = !mFlippedY;
}
}
mScaleY = scaleY;
} else if (scaleY > 1 || (height * scaleY) > 2 * mFrameWidth)
{
mScaleY = scaleY;
if(resizingTop()) {
mTranslateY = moveY;
}
}
}
}
}
}
if (rotating())
{
mTranslateX = 0;
mTranslateY = 0;
QLineF startLine(sceneBoundingRect().center(), event->lastScenePos());
QLineF currentLine(sceneBoundingRect().center(), event->scenePos());
mAngle += startLine.angleTo(currentLine);
if ((int)mAngle % 45 >= 45 - mAngleTolerance || (int)mAngle % 45 <= mAngleTolerance)
{
mAngle = qRound(mAngle / 45) * 45;
mAngleOffset += startLine.angleTo(currentLine);
if ((int)mAngleOffset % 360 > mAngleTolerance && (int)mAngleOffset % 360 < 360 - mAngleTolerance)
{
mAngle += mAngleOffset;
mAngleOffset = 0;
}
}
else if ((int)mAngle % 30 >= 30 - mAngleTolerance || (int)mAngle % 30 <= mAngleTolerance)
{
mAngle = qRound(mAngle / 30) * 30;
mAngleOffset += startLine.angleTo(currentLine);
if ((int)mAngleOffset % 360 > mAngleTolerance && (int)mAngleOffset % 360 < 360 - mAngleTolerance)
{
mAngle += mAngleOffset;
mAngleOffset = 0;
}
}
setCursorFromAngle(QString::number((int)mAngle % 360));
}
else if (moving())
{
mTranslateX = move.dx();
mTranslateY = move.dy();
moveLinkedItems(move);
}
if (mOperationMode == Scaling || moving() || rotating())
{
QTransform tr = buildTransform();
if (resizingRight() || resizingBottom() || resizingBottomRight())
{
QPointF ref;
// we just detects coordinates of corner before and after scaling and then moves object at diff between them.
if (resizingBottomRight() && (mMirrorX || mMirrorY))
{
if (mFlippedX && !mMirrorX && mFlippedY)// && !mMirrorY)
{
mTranslateX += mInitialTransform.map(delegated()->boundingRect().bottomLeft()).x() - tr.map(delegated()->boundingRect().bottomLeft()).x();
mTranslateY += mInitialTransform.map(delegated()->boundingRect().bottomLeft()).y() - tr.map(delegated()->boundingRect().bottomLeft()).y();
}
else if ((mFlippedX || mMirrorX) && (mFlippedY || mMirrorY))
{
mTranslateX += mInitialTransform.map(delegated()->boundingRect().bottomRight()).x() - tr.map(delegated()->boundingRect().bottomRight()).x();
mTranslateY += mInitialTransform.map(delegated()->boundingRect().bottomRight()).y() - tr.map(delegated()->boundingRect().bottomRight()).y();
}
else if (mFlippedX || mMirrorX)
{
mTranslateX += mInitialTransform.map(delegated()->boundingRect().topRight()).x() - tr.map(delegated()->boundingRect().topRight()).x();
mTranslateY += mInitialTransform.map(delegated()->boundingRect().topRight()).y() - tr.map(delegated()->boundingRect().topRight()).y();
}
else if (mFlippedY || mMirrorY)
{
mTranslateX += mInitialTransform.map(delegated()->boundingRect().bottomLeft()).x() - tr.map(delegated()->boundingRect().bottomLeft()).x();
mTranslateY += mInitialTransform.map(delegated()->boundingRect().bottomLeft()).y() - tr.map(delegated()->boundingRect().bottomLeft()).y();
}
else
{
mTranslateX += mInitialTransform.map(delegated()->boundingRect().bottomRight()).x() - tr.map(delegated()->boundingRect().bottomRight()).x();
mTranslateY += mInitialTransform.map(delegated()->boundingRect().bottomRight()).y() - tr.map(delegated()->boundingRect().bottomRight()).y();
}
}
else
{
mTranslateX += mInitialTransform.map(delegated()->boundingRect().topLeft()).x() - tr.map(delegated()->boundingRect().topLeft()).x();
mTranslateY += mInitialTransform.map(delegated()->boundingRect().topLeft()).y() - tr.map(delegated()->boundingRect().topLeft()).y();
}
}
else if (resizingTop() || resizingLeft())
{
QPointF bottomRight = tr.map(delegated()->boundingRect().bottomRight());
QPointF fixedPoint = mInitialTransform.map(delegated()->boundingRect().bottomRight());
mTranslateX += fixedPoint.x() - bottomRight.x();
mTranslateY += fixedPoint.y() - bottomRight.y();
}
delegated()->setTransform(buildTransform());
}
else // resizing/resizing horizontally
{
if (resizingBottomRight())
{
static QSizeF incV = QSizeF();
static QSizeF incH = QSizeF();
if (mMirrorX && mMirrorY)
mCurrentTool = ResizeTop;
else
mCurrentTool = ResizeBottom;
incV = resizeDelegate(moveX, moveY);
mOriginalSize += incV;
if (mMirrorX && mMirrorY)
mCurrentTool = ResizeLeft;
else
mCurrentTool = ResizeRight;
move = QLineF(event->lastScenePos(), event->scenePos());
moveX = move.length() * cos((move.angle() - mAngle) * PI / 180);
moveY = -move.length() * sin((move.angle() - mAngle) * PI / 180);
mFixedPoint = getFixedPointFromPos();
incH = resizeDelegate(moveX, moveY);
mOriginalSize -= incV;
mOriginalSize += incH;
mCurrentTool = ResizeBottomRight;
}
else
resizeDelegate(moveX, moveY);
}
event->accept();
}
void QQuickTextNodeEngine::addTextBlock(QTextDocument *textDocument, const QTextBlock &block, const QPointF &position, const QColor &textColor, const QColor &anchorColor, int selectionStart, int selectionEnd)
{
Q_ASSERT(textDocument);
#ifndef QT_NO_IM
int preeditLength = block.isValid() ? block.layout()->preeditAreaText().length() : 0;
int preeditPosition = block.isValid() ? block.layout()->preeditAreaPosition() : -1;
#endif
QVarLengthArray<QTextLayout::FormatRange> colorChanges;
mergeFormats(block.layout(), &colorChanges);
QPointF blockPosition = textDocument->documentLayout()->blockBoundingRect(block).topLeft() + position;
if (QTextList *textList = block.textList()) {
QPointF pos = blockPosition;
QTextLayout *layout = block.layout();
if (layout->lineCount() > 0) {
QTextLine firstLine = layout->lineAt(0);
Q_ASSERT(firstLine.isValid());
setCurrentLine(firstLine);
QRectF textRect = firstLine.naturalTextRect();
pos += textRect.topLeft();
if (block.textDirection() == Qt::RightToLeft)
pos.rx() += textRect.width();
const QTextCharFormat charFormat = block.charFormat();
QFont font(charFormat.font());
QFontMetricsF fontMetrics(font);
QTextListFormat listFormat = textList->format();
QString listItemBullet;
switch (listFormat.style()) {
case QTextListFormat::ListCircle:
listItemBullet = QChar(0x25E6); // White bullet
break;
case QTextListFormat::ListSquare:
listItemBullet = QChar(0x25AA); // Black small square
break;
case QTextListFormat::ListDecimal:
case QTextListFormat::ListLowerAlpha:
case QTextListFormat::ListUpperAlpha:
case QTextListFormat::ListLowerRoman:
case QTextListFormat::ListUpperRoman:
listItemBullet = textList->itemText(block);
break;
default:
listItemBullet = QChar(0x2022); // Black bullet
break;
};
QSizeF size(fontMetrics.width(listItemBullet), fontMetrics.height());
qreal xoff = fontMetrics.width(QLatin1Char(' '));
if (block.textDirection() == Qt::LeftToRight)
xoff = -xoff - size.width();
setPosition(pos + QPointF(xoff, 0));
QTextLayout layout;
layout.setFont(font);
layout.setText(listItemBullet); // Bullet
layout.beginLayout();
QTextLine line = layout.createLine();
line.setPosition(QPointF(0, 0));
layout.endLayout();
QList<QGlyphRun> glyphRuns = layout.glyphRuns();
for (int i=0; i<glyphRuns.size(); ++i)
addUnselectedGlyphs(glyphRuns.at(i));
}
}
int textPos = block.position();
QTextBlock::iterator blockIterator = block.begin();
while (!blockIterator.atEnd()) {
QTextFragment fragment = blockIterator.fragment();
QString text = fragment.text();
if (text.isEmpty())
continue;
QTextCharFormat charFormat = fragment.charFormat();
QFont font(charFormat.font());
QFontMetricsF fontMetrics(font);
int fontHeight = fontMetrics.descent() + fontMetrics.ascent();
int valign = charFormat.verticalAlignment();
if (valign == QTextCharFormat::AlignSuperScript)
setPosition(QPointF(blockPosition.x(), blockPosition.y() - fontHeight / 2));
else if (valign == QTextCharFormat::AlignSubScript)
setPosition(QPointF(blockPosition.x(), blockPosition.y() + fontHeight / 6));
else
setPosition(blockPosition);
if (text.contains(QChar::ObjectReplacementCharacter)) {
QTextFrame *frame = qobject_cast<QTextFrame *>(textDocument->objectForFormat(charFormat));
if (frame && frame->frameFormat().position() == QTextFrameFormat::InFlow) {
int blockRelativePosition = textPos - block.position();
QTextLine line = block.layout()->lineForTextPosition(blockRelativePosition);
if (!currentLine().isValid()
|| line.lineNumber() != currentLine().lineNumber()) {
setCurrentLine(line);
}
QQuickTextNodeEngine::SelectionState selectionState =
(selectionStart < textPos + text.length()
&& selectionEnd >= textPos)
? QQuickTextNodeEngine::Selected
: QQuickTextNodeEngine::Unselected;
addTextObject(QPointF(), charFormat, selectionState, textDocument, textPos);
}
textPos += text.length();
} else {
if (charFormat.foreground().style() != Qt::NoBrush)
setTextColor(charFormat.foreground().color());
else if (charFormat.isAnchor())
setTextColor(anchorColor);
else
setTextColor(textColor);
int fragmentEnd = textPos + fragment.length();
#ifndef QT_NO_IM
if (preeditPosition >= 0
&& (preeditPosition + block.position()) >= textPos
&& (preeditPosition + block.position()) <= fragmentEnd) {
fragmentEnd += preeditLength;
}
#endif
if (charFormat.background().style() != Qt::NoBrush) {
QTextLayout::FormatRange additionalFormat;
additionalFormat.start = textPos - block.position();
additionalFormat.length = fragmentEnd - textPos;
additionalFormat.format = charFormat;
colorChanges << additionalFormat;
}
textPos = addText(block, charFormat, textColor, colorChanges, textPos, fragmentEnd,
selectionStart, selectionEnd);
}
++blockIterator;
}
#ifndef QT_NO_IM
if (preeditLength >= 0 && textPos <= block.position() + preeditPosition) {
setPosition(blockPosition);
textPos = block.position() + preeditPosition;
QTextLine line = block.layout()->lineForTextPosition(preeditPosition);
if (!currentLine().isValid()
|| line.lineNumber() != currentLine().lineNumber()) {
setCurrentLine(line);
}
textPos = addText(block, block.charFormat(), textColor, colorChanges,
textPos, textPos + preeditLength,
selectionStart, selectionEnd);
}
#endif
setCurrentLine(QTextLine()); // Reset current line because the text layout changed
m_hasContents = true;
}
void UBGraphicsTriangle::mouseMoveEvent(QGraphicsSceneMouseEvent *event)
{
if (!mResizing1 && !mResizing2 && !mRotating)
{
QGraphicsItem::mouseMoveEvent(event);
}
else
{
QPoint currPos = sceneTransform().inverted().map(event->screenPos());
if (mResizing1)
{
if (mOrientation == TopLeft || mOrientation == BottomLeft)
{
int deltaX = currPos.x() - lastPos.x();
if (lastRect.width() + deltaX < sMinWidth)
deltaX = sMinWidth - lastRect.width();
setRect(QRectF(lastRect.left(), lastRect.top(),
lastRect.width() + deltaX, lastRect.height()), mOrientation);
}
else
{
int deltaX = lastPos.x() - currPos.x();
if (lastRect.width() + deltaX < sMinWidth)
deltaX = sMinWidth - lastRect.width();
setRect(QRectF(lastRect.left() - deltaX, lastRect.top(),
lastRect.width() + deltaX, lastRect.height()), mOrientation);
}
}
//-----------------------------------------------//
if (mResizing2)
{
if (mOrientation == BottomRight || mOrientation == BottomLeft)
{
int deltaY = lastPos.y() - currPos.y();
if (lastRect.height() + deltaY < sMinHeight)
deltaY = sMinHeight - lastRect.height();
setRect(QRectF(lastRect.left(), lastRect.top() - deltaY,
lastRect.width(), lastRect.height() + deltaY), mOrientation);
}
else
{
int deltaY = currPos.y() - lastPos.y();
if (lastRect.height() + deltaY < sMinHeight)
deltaY = sMinHeight - lastRect.height();
setRect(QRectF(lastRect.left(), lastRect.top(),
lastRect.width(), lastRect.height() + deltaY), mOrientation);
}
}
//-----------------------------------------------//
if (mRotating)
{
QLineF currentLine(rotationCenter(), event->pos());
QLineF lastLine(rotationCenter(), event->lastPos());
rotateAroundCenter(currentLine.angleTo(lastLine));
}
//-----------------------------------------------//
event->accept();
}
}
void TextObject::createBitmap() {
if (_created)
destroyBitmap();
Common::String msg = parseMsgText(_textID, NULL);
Common::String message;
const char *c = msg.c_str();
// remove spaces (NULL_TEXT) from the end of the string,
// while this helps make the string unique it screws up
// text justification
for (int i = (int)msg.size() - 1; c[i] == TEXT_NULL; i--)
msg.deleteLastChar();
// remove char of id 13 from the end of the string,
for (int i = (int)msg.size() - 1; c[i] == 13; i--)
msg.deleteLastChar();
// format the output message to incorporate line wrapping
// (if necessary) for the text object
const int SCREEN_WIDTH = _width ? _width : 640;
const int SCREEN_MARGIN = 75;
// If the speaker is too close to the edge of the screen we have to make
// some room for the subtitles.
if (_isSpeech){
if (_x < SCREEN_MARGIN) {
_x = SCREEN_MARGIN;
} else if (SCREEN_WIDTH - _x < SCREEN_MARGIN) {
_x = SCREEN_WIDTH - SCREEN_MARGIN;
}
}
// The maximum width for any line of text is determined by the justification
// mode. Note that there are no left/right margins -- this is consistent
// with GrimE.
int maxWidth;
if (_justify == CENTER) {
maxWidth = 2 * MIN(_x, SCREEN_WIDTH - _x);
} else if (_justify == LJUSTIFY) {
maxWidth = SCREEN_WIDTH - _x;
} else if (_justify == RJUSTIFY) {
maxWidth = _x;
}
// We break the message to lines not longer than maxWidth
_numberLines = 1;
int lineWidth = 0;
int maxLineWidth = 0;
for (int i = 0; i < (int)msg.size(); i++) {
lineWidth += MAX(_font->getCharWidth(msg[i]), _font->getCharDataWidth(msg[i]));
if (lineWidth > maxWidth) {
if (message.contains(' ')) {
while (msg[i] != ' ' && i > 0) {
lineWidth -= MAX(_font->getCharWidth(msg[i]), _font->getCharDataWidth(msg[i]));
message.deleteLastChar();
--i;
}
} else if (msg[i] != ' ') { // if it is a unique word
int dashWidth = MAX(_font->getCharWidth('-'), _font->getCharDataWidth('-'));
while (lineWidth + dashWidth > maxWidth) {
lineWidth -= MAX(_font->getCharWidth(msg[i]), _font->getCharDataWidth(msg[i]));
message.deleteLastChar();
--i;
}
message += '-';
}
message += '\n';
_numberLines++;
if (lineWidth > maxLineWidth) {
maxLineWidth = lineWidth;
}
lineWidth = 0;
continue; // don't add the space back
}
if (lineWidth > maxLineWidth)
maxLineWidth = lineWidth;
message += msg[i];
}
// If the text object is a speech subtitle, the y parameter is the
// coordinate of the bottom of the text block (instead of the top). It means
// that every extra line pushes the previous lines up, instead of being
// printed further down the screen.
const int SCREEN_TOP_MARGIN = 16;
if (_isSpeech) {
_y -= _numberLines * _font->getHeight();
if (_y < SCREEN_TOP_MARGIN) {
_y = SCREEN_TOP_MARGIN;
}
}
_textObjectHandle = (GfxBase::TextObjectHandle **)malloc(sizeof(long) * _numberLines);
_bitmapWidthPtr = new int[_numberLines];
for (int j = 0; j < _numberLines; j++) {
int nextLinePos, cutLen;
const char *pos = strchr(message.c_str(), '\n');
if (pos) {
nextLinePos = pos - message.c_str();
cutLen = nextLinePos + 1;
} else {
nextLinePos = message.size();
cutLen = nextLinePos;
}
Common::String currentLine(message.c_str(), message.c_str() + nextLinePos);
_bitmapWidthPtr[j] = 0;
for (unsigned int i = 0; i < currentLine.size(); ++i) {
_bitmapWidthPtr[j] += MAX(_font->getCharWidth(currentLine[i]), _font->getCharDataWidth(currentLine[i]));
}
_textBitmap = new uint8[_font->getHeight() * (_bitmapWidthPtr[j] + 1)];
memset(_textBitmap, 0, _font->getHeight() * (_bitmapWidthPtr[j] + 1));
// Fill bitmap
int startOffset = 0;
for (unsigned int d = 0; d < currentLine.size(); d++) {
int ch = currentLine[d];
int8 startingLine = _font->getCharStartingLine(ch) + _font->getBaseOffsetY();
int32 charDataWidth = _font->getCharDataWidth(ch);
int32 charWidth = _font->getCharWidth(ch);
int8 startingCol = _font->getCharStartingCol(ch);
for (int line = 0; line < _font->getCharDataHeight(ch); line++) {
int offset = startOffset + ((_bitmapWidthPtr[j] + 1) * (line + startingLine));
for (int r = 0; r < charDataWidth; r++) {
const byte pixel = *(_font->getCharData(ch) + r + (charDataWidth * line));
byte *dst = _textBitmap + offset + startingCol + r;
if (*dst == 0 && pixel != 0)
_textBitmap[offset + startingCol + r] = pixel;
}
if (line + startingLine >= _font->getHeight())
break;
}
startOffset += charWidth;
}
_textObjectHandle[j] = g_driver->createTextBitmap(_textBitmap, _bitmapWidthPtr[j] + 1, _font->getHeight(), _fgColor);
delete[] _textBitmap;
for (int count = 0; count < cutLen; count++)
message.deleteChar(0);
}
_created = true;
}
bool ScreenWindow::atEndOfOutput() const
{
return currentLine() == (lineCount()-windowLines());
}
bool ScreenWindow::isSelected( int column , int line )
{
return _screen->isSelected( column , qMin(line + currentLine(),endWindowLine()) );
}
void ScreenWindow::getSelectionEnd( int& column , int& line )
{
_screen->getSelectionEnd(column,line);
line -= currentLine();
}
// return the index of the line at the end of this window, or if this window
// goes beyond the end of the screen, the index of the line at the end
// of the screen.
//
// when passing a line number to a Screen method, the line number should
// never be more than endWindowLine()
//
int ScreenWindow::endWindowLine() const
{
return qMin(currentLine() + windowLines() - 1,
lineCount() - 1);
}
vector<VertexObject*> DivideAndConquerFor3DCH::find2DConvexHull( list<VertexObject*> *pointSet )
{
vector<VertexObject*> upper;
vector<VertexObject*> lower;
list<VertexObject*>::iterator pointIter;
D3DXVECTOR2 midLine( pointSet->back()->v->x - pointSet->front()->v->x, pointSet->back()->v->y - pointSet->front()->v->y );
for( pointIter = pointSet->begin(); pointIter != pointSet->end(); pointIter++ )
{
D3DXVECTOR2 currentLine( (*pointIter)->v->x - pointSet->front()->v->x, (*pointIter)->v->y - pointSet->front()->v->y );
float crossProduct = midLine.x * currentLine.y - midLine.y * currentLine.x;
if( crossProduct > 0 || (*pointIter) == pointSet->front() || (*pointIter) == pointSet->back() )
{
upper.push_back( (*pointIter) );
}
}
list<VertexObject*>::reverse_iterator re_pointIter;
midLine = D3DXVECTOR2( pointSet->front()->v->x - pointSet->back()->v->x, pointSet->front()->v->y - pointSet->back()->v->y );
for( re_pointIter = pointSet->rbegin(); re_pointIter != pointSet->rend(); re_pointIter++ )
{
D3DXVECTOR2 currentLine( (*re_pointIter)->v->x - pointSet->back()->v->x, (*re_pointIter)->v->y - pointSet->back()->v->y );
float crossProduct = midLine.x * currentLine.y - midLine.y * currentLine.x;
if( crossProduct > 0 || (*re_pointIter) == pointSet->front() || (*re_pointIter) == pointSet->back() )
{
lower.push_back( (*re_pointIter) );
}
}
vector<VertexObject*> upperChain;
vector<VertexObject*> lowerChain;
upperChain.push_back( upper[ 0 ] );
upperChain.push_back( upper[ 1 ] );
for( int i = 2; i < upper.size(); i++ )
{
for( ; upperChain.size() >= 2 ; )
{
int upperChainSize = upperChain.size();
D3DXVECTOR2 currentLine( upper[ i ]->v->x - upperChain[ upperChainSize - 1 ]->v->x, upper[ i ]->v->y - upperChain[ upperChainSize - 1 ]->v->y );
D3DXVECTOR2 preLine( upperChain[ upperChainSize - 1 ]->v->x - upperChain[ upperChainSize - 2 ]->v->x, upperChain[ upperChainSize - 1 ]->v->y - upperChain[ upperChainSize - 2 ]->v->y );
float crossProduct = preLine.x * currentLine.y - preLine.y * currentLine.x;
if( crossProduct > 0 )
{
upperChain.pop_back();
}
else
{
break;
}
}
upperChain.push_back( upper[ i ] );
}
lowerChain.push_back( lower[ 0 ] );
lowerChain.push_back( lower[ 1 ] );
for( int i = 2; i < lower.size(); i++ )
{
for( ; lowerChain.size() >= 2 ; )
{
int lowerChainSize = lowerChain.size();
D3DXVECTOR2 currentLine( lower[ i ]->v->x - lowerChain[ lowerChainSize - 1 ]->v->x, lower[ i ]->v->y - lowerChain[ lowerChainSize - 1 ]->v->y );
D3DXVECTOR2 preLine( lowerChain[ lowerChainSize - 1 ]->v->x - lowerChain[ lowerChainSize - 2 ]->v->x, lowerChain[ lowerChainSize - 1 ]->v->y - lowerChain[ lowerChainSize - 2 ]->v->y );
float crossProduct = preLine.x * currentLine.y - preLine.y * currentLine.x;
if( crossProduct > 0 )
{
lowerChain.pop_back();
}
else
{
break;
}
}
lowerChain.push_back( lower[ i ] );
}
upperChain.pop_back();
lowerChain.pop_back();
for( int i = 0; i < lowerChain.size(); i++ )
{
upperChain.push_back( lowerChain[ i ] );
}
return upperChain;
}
CC_FILE_ERROR SinusxFilter::loadFile(QString filename, ccHObject& container, LoadParameters& parameters)
{
//open file
QFile file(filename);
if (!file.open(QFile::ReadOnly))
return CC_FERR_READING;
QTextStream stream(&file);
QString currentLine("C");
ccPolyline* currentPoly = 0;
ccPointCloud* currentVertices = 0;
unsigned lineNumber = 0;
CurveType curveType = INVALID;
unsigned cpIndex = 0;
CC_FILE_ERROR result = CC_FERR_NO_ERROR;
CCVector3d Pshift(0,0,0);
bool firstVertex = true;
while (!currentLine.isEmpty() && file.error() == QFile::NoError)
{
currentLine = stream.readLine();
++lineNumber;
if (currentLine.startsWith("C "))
{
//ignore comments
continue;
}
else if (currentLine.startsWith("B"))
{
//new block
if (currentPoly)
{
if ( currentVertices
&& currentVertices->size() != 0
&& currentVertices->resize(currentVertices->size())
&& currentPoly->addPointIndex(0,currentVertices->size()) )
{
container.addChild(currentPoly);
}
else
{
delete currentPoly;
}
currentPoly = 0;
currentVertices = 0;
}
//read type
QStringList tokens = currentLine.split(QRegExp("\\s+"),QString::SkipEmptyParts);
if (tokens.size() < 2 || tokens[1].length() > 1)
{
ccLog::Warning(QString("[SinusX] Line %1 is corrupted").arg(lineNumber));
result = CC_FERR_MALFORMED_FILE;
continue;
}
QChar curveTypeChar = tokens[1].at(0);
curveType = INVALID;
if (curveTypeChar == SHORTCUT[CUREV_S])
curveType = CUREV_S;
else if (curveTypeChar == SHORTCUT[CURVE_P])
curveType = CURVE_P;
else if (curveTypeChar == SHORTCUT[CURVE_N])
curveType = CURVE_N;
else if (curveTypeChar == SHORTCUT[CURVE_C])
curveType = CURVE_C;
if (curveType == INVALID)
{
ccLog::Warning(QString("[SinusX] Unhandled curve type '%1' on line '%2'!").arg(curveTypeChar).arg(lineNumber));
result = CC_FERR_MALFORMED_FILE;
continue;
}
//TODO: what about the local coordinate system and scale?! (7 last values)
if (tokens.size() > 7)
{
}
//block is ready
currentVertices = new ccPointCloud("vertices");
currentPoly = new ccPolyline(currentVertices);
currentPoly->addChild(currentVertices);
currentVertices->setEnabled(false);
cpIndex = 0;
}
else if (currentPoly)
{
if (currentLine.startsWith("CN"))
{
if (currentLine.length() > 3)
{
QString name = currentLine.right(currentLine.length()-3);
currentPoly->setName(name);
}
}
else if (currentLine.startsWith("CP"))
{
QStringList tokens = currentLine.split(QRegExp("\\s+"),QString::SkipEmptyParts);
switch (cpIndex)
{
case 0: //first 'CP' line
{
//expected: CP + 'connected' + 'closed' flags
bool ok = (tokens.size() == 3);
if (ok)
{
bool ok1 = true, ok2 = true;
int isConnected = tokens[1].toInt(&ok1);
int isClosed = tokens[2].toInt(&ok2);
ok = ok1 && ok2;
if (ok)
{
if (isConnected == 0)
{
//points are not connected?!
//--> we simply hide the polyline and display its vertices
currentPoly->setVisible(false);
currentVertices->setEnabled(true);
}
currentPoly->setClosed(isClosed != 0);
}
}
if (!ok)
{
ccLog::Warning(QString("[SinusX] Line %1 is corrupted (expected: 'CP connected_flag closed_flag')").arg(lineNumber));
result = CC_FERR_MALFORMED_FILE;
continue;
}
++cpIndex;
}
break;
case 1: //second 'CP' line
{
if (curveType == CUREV_S)
{
++cpIndex;
//no break: we go directly to the next case (cpIndex = 2)
}
else if (curveType == CURVE_P)
{
//nothing particular for profiles (they are not handled in the same way in CC!)
++cpIndex;
break;
}
else if (curveType == CURVE_N)
{
//expected: CP + const_altitude
bool ok = (tokens.size() == 2);
if (ok)
{
double z = tokens[1].toDouble(&ok);
if (ok)
currentPoly->setMetaData(ccPolyline::MetaKeyConstAltitude(),QVariant(z));
}
if (!ok)
{
ccLog::Warning(QString("[SinusX] Line %1 is corrupted (expected: 'CP const_altitude')").arg(lineNumber));
result = CC_FERR_MALFORMED_FILE;
continue;
}
++cpIndex;
break;
}
else if (curveType == CURVE_C)
{
//skip the next 16 values
int skipped = tokens.size()-1; //all but the 'CP' keyword
while (skipped < 16 && !currentLine.isEmpty() && file.error() == QFile::NoError)
{
currentLine = stream.readLine();
++lineNumber;
tokens = currentLine.split(QRegExp("\\s+"),QString::SkipEmptyParts);
skipped += tokens.size();
}
assert(skipped == 16); //no more than 16 normally!
++cpIndex;
break;
}
else
{
assert(false);
++cpIndex;
break;
}
}
case 2:
{
//CP + base plane: 0 = (XY), 1 = (YZ), 2 = (ZX)
bool ok = (tokens.size() == 2);
if (ok)
{
int vertDir = 2;
QChar basePlaneChar = tokens[1].at(0);
if (basePlaneChar == '0')
vertDir = 2;
else if (basePlaneChar == '1')
vertDir = 0;
else if (basePlaneChar == '2')
vertDir = 1;
else
ok = false;
if (ok)
currentPoly->setMetaData(ccPolyline::MetaKeyUpDir(),QVariant(vertDir));
}
if (!ok)
{
ccLog::Warning(QString("[SinusX] Line %1 is corrupted (expected: 'CP base_plane')").arg(lineNumber));
result = CC_FERR_MALFORMED_FILE;
continue;
}
}
++cpIndex;
break;
default:
//ignored
break;
}
}
else if (!currentLine.isEmpty())
{
assert(currentVertices);
//shoud be a point!
QStringList tokens = currentLine.split(QRegExp("\\s+"),QString::SkipEmptyParts);
bool ok = (tokens.size() == 4);
if (ok)
{
CCVector3d Pd;
Pd.x = tokens[0].toDouble(&ok);
if (ok)
{
Pd.y = tokens[1].toDouble(&ok);
if (ok)
{
Pd.z = tokens[2].toDouble(&ok);
if (ok)
{
//resize vertex cloud if necessary
if ( currentVertices->size() == currentVertices->capacity()
&& !currentVertices->reserve(currentVertices->size() + 10))
{
delete currentPoly;
return CC_FERR_NOT_ENOUGH_MEMORY;
}
//first point: check for 'big' coordinates
if (firstVertex/*currentVertices->size() == 0*/)
{
firstVertex = false;
if (HandleGlobalShift(Pd,Pshift,parameters))
{
if (currentPoly)
currentPoly->setGlobalShift(Pshift);
else
currentVertices->setGlobalShift(Pshift);
ccLog::Warning("[SinusX::loadFile] Polyline has been recentered! Translation: (%.2f ; %.2f ; %.2f)",Pshift.x,Pshift.y,Pshift.z);
}
}
currentVertices->addPoint(CCVector3::fromArray((Pd+Pshift).u));
}
}
}
}
if (!ok)
{
ccLog::Warning(QString("[SinusX] Line %1 is corrupted (expected: 'X Y Z Key ...')").arg(lineNumber));
result = CC_FERR_MALFORMED_FILE;
continue;
}
}
}
}
//don't forget the last polyline!
if (currentPoly)
{
if ( currentVertices
&& currentVertices->size() != 0
&& currentVertices->resize(currentVertices->size())
&& currentPoly->addPointIndex(0,currentVertices->size()) )
{
container.addChild(currentPoly);
}
}
return result;
}
void TextObject::setupText() {
Common::String msg = LuaBase::instance()->parseMsgText(_textID.c_str(), NULL);
Common::String message;
// remove spaces (NULL_TEXT) from the end of the string,
// while this helps make the string unique it screws up
// text justification
// remove char of id 13 from the end of the string,
int pos = msg.size() - 1;
while (pos >= 0 && (msg[pos] == ' ' || msg[pos] == 13)) {
msg.deleteLastChar();
pos = msg.size() - 1;
}
delete[] _lines;
if (msg.size() == 0) {
_lines = NULL;
return;
}
if (g_grim->getGameType() == GType_MONKEY4) {
if (_x == 0)
_x = 320;
if (_y == 0)
_y = 240;
}
// format the output message to incorporate line wrapping
// (if necessary) for the text object
const int SCREEN_WIDTH = _width ? _width : 640;
const int SCREEN_MARGIN = 75;
// If the speaker is too close to the edge of the screen we have to make
// some room for the subtitles.
if (_isSpeech){
if (_x < SCREEN_MARGIN) {
_x = SCREEN_MARGIN;
} else if (SCREEN_WIDTH - _x < SCREEN_MARGIN) {
_x = SCREEN_WIDTH - SCREEN_MARGIN;
}
}
// The maximum width for any line of text is determined by the justification
// mode. Note that there are no left/right margins -- this is consistent
// with GrimE.
int maxWidth = 0;
if (_justify == CENTER) {
maxWidth = 2 * MIN(_x, SCREEN_WIDTH - _x);
} else if (_justify == LJUSTIFY) {
maxWidth = SCREEN_WIDTH - _x;
} else if (_justify == RJUSTIFY) {
maxWidth = _x;
}
// We break the message to lines not longer than maxWidth
Common::String currLine;
_numberLines = 1;
int lineWidth = 0;
int maxLineWidth = 0;
for (uint i = 0; i < msg.size(); i++) {
lineWidth += MAX(_font->getCharWidth(msg[i]), _font->getCharDataWidth(msg[i]));
if (lineWidth > maxWidth) {
bool wordSplit = false;
if (currLine.contains(' ')) {
while (msg[i] != ' ' && i > 0) {
lineWidth -= MAX(_font->getCharWidth(msg[i]), _font->getCharDataWidth(msg[i]));
message.deleteLastChar();
--i;
}
} else if (msg[i] != ' ') { // if it is a unique word
int dashWidth = MAX(_font->getCharWidth('-'), _font->getCharDataWidth('-'));
while (lineWidth + dashWidth > maxWidth) {
lineWidth -= MAX(_font->getCharWidth(msg[i]), _font->getCharDataWidth(msg[i]));
message.deleteLastChar();
--i;
}
message += '-';
wordSplit = true;
}
message += '\n';
currLine.clear();
_numberLines++;
if (lineWidth > maxLineWidth) {
maxLineWidth = lineWidth;
}
lineWidth = 0;
if (wordSplit) {
lineWidth += MAX(_font->getCharWidth(msg[i]), _font->getCharDataWidth(msg[i]));
} else {
continue; // don't add the space back
}
}
if (lineWidth > maxLineWidth)
maxLineWidth = lineWidth;
message += msg[i];
currLine += msg[i];
}
// If the text object is a speech subtitle, the y parameter is the
// coordinate of the bottom of the text block (instead of the top). It means
// that every extra line pushes the previous lines up, instead of being
// printed further down the screen.
const int SCREEN_TOP_MARGIN = 16;
if (_isSpeech) {
_y -= _numberLines * _font->getHeight();
if (_y < SCREEN_TOP_MARGIN) {
_y = SCREEN_TOP_MARGIN;
}
}
_lines = new Common::String[_numberLines];
for (int j = 0; j < _numberLines; j++) {
int nextLinePos, cutLen;
const char *breakPos = strchr(message.c_str(), '\n');
if (breakPos) {
nextLinePos = breakPos - message.c_str();
cutLen = nextLinePos + 1;
} else {
nextLinePos = message.size();
cutLen = nextLinePos;
}
Common::String currentLine(message.c_str(), message.c_str() + nextLinePos);
_lines[j] = currentLine;
int width = _font->getStringLength(currentLine);
if (width > _maxLineWidth)
_maxLineWidth = width;
for (int count = 0; count < cutLen; count++)
message.deleteChar(0);
}
_elapsedTime = 0;
}
std::vector<double> Pinger::runPingProcessInstance(const uint16_t requestCount, const double delay){
this->progressMutex.lock();
this->progress = 0;
this->progressMutex.unlock();
/*
if(delay < 0.2){
delay = 0.2;//on UNIX only root can run ping with delay less than 0.2
}
*/
std::string interval = std::to_string(delay);
std::replace(interval.begin(), interval.end(), ',', '.');
std::string command = "ping -c " + std::to_string(requestCount + this->skip) + " -i " + interval + " " + this->host;
command += " 2>&1";//redirect stderr to stdout
FILE *ping_descriptor = popen(command.c_str(), "r");
if(ping_descriptor == nullptr){
std::lock_guard<std::mutex> lg(this->sysCallMutex);
throw std::runtime_error(strerror(errno));
}
const uint32_t bufferSize = 1000;
std::unique_ptr<char> buffer(new char[bufferSize]);
std::vector<double> lags;
int32_t skipCounter = this->skip;//пропускаем первый результат
double progressStep = 1.0 / (requestCount + skipCounter);
do{
if(fgets(buffer.get(), bufferSize, ping_descriptor) != buffer.get() && ferror(ping_descriptor) != 0){
std::lock_guard<std::mutex> lg(this->sysCallMutex);
throw std::runtime_error(strerror(errno));
}
if(this->stopFlag)
break;
std::string currentLine(buffer.get());
if(currentLine.find("ping: ") == 0)//ping notified us about an error
throw std::runtime_error(currentLine.substr(6));
std::pair<bool, double> lagTime = extractPingTime_ms(currentLine);
if(lagTime.first){//если в строке было время - записываем его и посылаем сигнал
this->progressMutex.lock();
if(this->progress + progressStep <= 1.0){//если шагов больше чем requestCount - не переполняем счетчик
this->progress += progressStep;
}
this->progressMutex.unlock();
//skip, if required
if(skipCounter --> 0)//brand new '-->' operator: "Goes to ..."
continue;
lags.push_back(lagTime.second);
}
}while(feof(ping_descriptor) == 0 && this->stopFlag == false);
this->sysCallMutex.lock();
int status = pclose(ping_descriptor);
int exitStatus = WEXITSTATUS(status);
this->sysCallMutex.unlock();
if(exitStatus != 0){
throw std::runtime_error("Ping failed");
}
if(this->stopFlag == false){
this->progressMutex.lock();
this->progress = 1.0;
this->progressMutex.unlock();
}
return lags;
}
