psm2_error_t
__psm2_ep_connect(psm2_ep_t ep, int num_of_epid, psm2_epid_t const *array_of_epid,
int const *array_of_epid_mask, /* can be NULL */
psm2_error_t *array_of_errors, psm2_epaddr_t *array_of_epaddr,
int64_t timeout)
{
psm2_error_t err = PSM2_OK;
ptl_ctl_t *ptlctl;
ptl_t *ptl;
int i, j, dup_idx;
int num_toconnect = 0;
int *epid_mask = NULL;
int *epid_mask_isdupof = NULL;
char *device;
uint64_t t_start = get_cycles();
uint64_t t_left;
union psmi_envvar_val timeout_intval;
PSM2_LOG_MSG("entering");
PSMI_ERR_UNLESS_INITIALIZED(ep);
PSMI_PLOCK();
/*
* Normally we would lock here, but instead each implemented ptl component
* does its own locking. This is mostly because the ptl components are
* ahead of the PSM interface in that they can disconnect their peers.
*/
if (ep == NULL || array_of_epaddr == NULL || array_of_epid == NULL ||
num_of_epid < 1) {
err = psmi_handle_error(ep, PSM2_PARAM_ERR,
"Invalid psm2_ep_connect parameters");
goto fail;
}
/* We need two of these masks to detect duplicates */
err = PSM2_NO_MEMORY;
epid_mask =
(int *)psmi_malloc(ep, UNDEFINED, sizeof(int) * num_of_epid);
if (epid_mask == NULL)
goto fail;
epid_mask_isdupof =
(int *)psmi_malloc(ep, UNDEFINED, sizeof(int) * num_of_epid);
if (epid_mask_isdupof == NULL)
goto fail;
err = PSM2_OK;
/* Eventually handle timeouts across all connects. */
for (j = 0; j < num_of_epid; j++) {
if (array_of_epid_mask != NULL && !array_of_epid_mask[j])
epid_mask[j] = 0;
else {
epid_mask[j] = 1;
array_of_errors[j] = PSM2_EPID_UNKNOWN;
array_of_epaddr[j] = NULL;
num_toconnect++;
}
epid_mask_isdupof[j] = -1;
}
psmi_getenv("PSM2_CONNECT_TIMEOUT",
"End-point connection timeout over-ride. 0 for no time-out.",
PSMI_ENVVAR_LEVEL_USER, PSMI_ENVVAR_TYPE_UINT,
(union psmi_envvar_val)0, &timeout_intval);
if (getenv("PSM2_CONNECT_TIMEOUT")) {
timeout = timeout_intval.e_uint * SEC_ULL;
} else if (timeout > 0) {
/* The timeout parameter provides the minimum timeout. A heuristic
* is used to scale up the timeout linearly with the number of
* endpoints, and we allow one second per 100 endpoints. */
timeout = max(timeout, (num_toconnect * SEC_ULL) / 100);
}
if (timeout > 0 && timeout < PSMI_MIN_EP_CONNECT_TIMEOUT)
timeout = PSMI_MIN_EP_CONNECT_TIMEOUT;
_HFI_PRDBG("Connect to %d endpoints with time-out of %.2f secs\n",
num_toconnect, (double)timeout / 1e9);
/* Look for duplicates in input array */
for (i = 0; i < num_of_epid; i++) {
for (j = i + 1; j < num_of_epid; j++) {
if (array_of_epid[i] == array_of_epid[j] &&
epid_mask[i] && epid_mask[j]) {
epid_mask[j] = 0; /* don't connect more than once */
epid_mask_isdupof[j] = i;
}
}
}
for (i = 0; i < PTL_MAX_INIT; i++) {
if (ep->devid_enabled[i] == -1)
continue;
/* Set up the right connect ptrs */
switch (ep->devid_enabled[i]) {
case PTL_DEVID_IPS:
ptlctl = &ep->ptl_ips;
ptl = ep->ptl_ips.ptl;
device = "ips";
break;
case PTL_DEVID_AMSH:
ptlctl = &ep->ptl_amsh;
ptl = ep->ptl_amsh.ptl;
device = "amsh";
break;
case PTL_DEVID_SELF:
ptlctl = &ep->ptl_self;
ptl = ep->ptl_self.ptl;
device = "self";
break;
default:
device = "unknown";
ptlctl = &ep->ptl_ips; /*no-unused */
ptl = ep->ptl_ips.ptl; /*no-unused */
device = "ips"; /*no-unused */
psmi_handle_error(PSMI_EP_NORETURN, PSM2_INTERNAL_ERR,
"Unknown/unhandled PTL id %d\n",
ep->devid_enabled[i]);
break;
}
t_left = psmi_cycles_left(t_start, timeout);
_HFI_VDBG("Trying to connect with device %s\n", device);
if ((err = ptlctl->ep_connect(ptl, num_of_epid, array_of_epid,
epid_mask, array_of_errors,
array_of_epaddr,
cycles_to_nanosecs(t_left)))) {
_HFI_PRDBG("Connect failure in device %s err=%d\n",
device, err);
goto connect_fail;
}
/* Now process what's been connected */
for (j = 0; j < num_of_epid; j++) {
dup_idx = epid_mask_isdupof[j];
if (!epid_mask[j] && dup_idx == -1)
continue;
if (dup_idx != -1) { /* dup */
array_of_epaddr[j] = array_of_epaddr[dup_idx];
array_of_errors[j] = array_of_errors[dup_idx];
epid_mask_isdupof[j] = -1;
}
if (array_of_errors[j] == PSM2_OK) {
epid_mask[j] = 0; /* don't try on next ptl */
ep->connections++;
}
}
}
for (i = 0; i < num_of_epid; i++) {
ptl_ctl_t *c = NULL;
if (array_of_epid_mask != NULL && !array_of_epid_mask[i])
continue;
/* If we see unreachable here, that means some PTLs were not enabled */
if (array_of_errors[i] == PSM2_EPID_UNREACHABLE) {
err = PSM2_EPID_UNREACHABLE;
break;
}
psmi_assert_always(array_of_epaddr[i] != NULL);
c = array_of_epaddr[i]->ptlctl;
psmi_assert_always(c != NULL);
_HFI_VDBG("%-20s DEVICE %s (%p)\n",
psmi_epaddr_get_name(array_of_epid[i]),
c == &ep->ptl_ips ? "hfi" :
(c == &ep->ptl_amsh ? "amsh" : "self"),
(void *)array_of_epaddr[i]->ptlctl->ptl);
}
connect_fail:
/* If the error is a timeout (at worse) and the client is OPA MPI,
* just return timeout to let OPA MPI handle the hostnames that
* timed out */
if (err != PSM2_OK) {
char errbuf[PSM2_ERRSTRING_MAXLEN];
size_t len;
int j = 0;
if (err == PSM2_EPID_UNREACHABLE) {
char *deverr = "of an incorrect setting";
char *eperr = " ";
char *devname = NULL;
if (!psmi_ep_device_is_enabled(ep, PTL_DEVID_AMSH)) {
deverr =
"there is no shared memory PSM device (shm)";
eperr = " shared memory ";
} else
if (!psmi_ep_device_is_enabled(ep, PTL_DEVID_IPS)) {
deverr =
"there is no OPA PSM device (hfi)";
eperr = " OPA ";
}
len = snprintf(errbuf, sizeof(errbuf) - 1,
"Some%sendpoints could not be connected because %s "
"in the currently enabled PSM_DEVICES (",
eperr, deverr);
for (i = 0; i < PTL_MAX_INIT && len < sizeof(errbuf) - 1;
i++) {
switch (ep->devid_enabled[i]) {
case PTL_DEVID_IPS:
devname = "hfi";
break;
case PTL_DEVID_AMSH:
devname = "shm";
break;
case PTL_DEVID_SELF:
default:
devname = "self";
break;
}
len +=
snprintf(errbuf + len,
sizeof(errbuf) - len - 1, "%s,",
devname);
}
if (len < sizeof(errbuf) - 1 && devname != NULL)
/* parsed something, remove trailing comma */
errbuf[len - 1] = ')';
} else
len = snprintf(errbuf, sizeof(errbuf) - 1,
"%s", err == PSM2_TIMEOUT ?
"Dectected connection timeout" :
psm2_error_get_string(err));
/* first pass, look for all nodes with the error */
for (i = 0; i < num_of_epid && len < sizeof(errbuf) - 1; i++) {
if (array_of_epid_mask != NULL
&& !array_of_epid_mask[i])
continue;
if (array_of_errors[i] == PSM2_OK)
continue;
if (array_of_errors[i] == PSM2_EPID_UNREACHABLE &&
err != PSM2_EPID_UNREACHABLE)
continue;
if (err == array_of_errors[i]) {
len +=
snprintf(errbuf + len,
sizeof(errbuf) - len - 1, "%c %s",
j == 0 ? ':' : ',',
psmi_epaddr_get_hostname
(array_of_epid[i]));
j++;
}
}
errbuf[sizeof(errbuf) - 1] = '\0';
err = psmi_handle_error(ep, err, errbuf);
}
fail:
PSMI_PUNLOCK();
if (epid_mask != NULL)
psmi_free(epid_mask);
if (epid_mask_isdupof != NULL)
psmi_free(epid_mask_isdupof);
PSM2_LOG_MSG("leaving");
return err;
}
psm_error_t __psm_ep_close(psm_ep_t ep, int mode, int64_t timeout_in)
{
psm_error_t err = PSM_OK;
uint64_t t_start = get_cycles();
union psmi_envvar_val timeout_intval;
psm_ep_t tmp, mep;
PSMI_ERR_UNLESS_INITIALIZED(ep);
psmi_assert_always(ep->mctxt_master == ep);
PSMI_PLOCK();
if (psmi_opened_endpoint == NULL) {
err = psmi_handle_error(NULL, PSM_EP_WAS_CLOSED,
"PSM Endpoint is closed or does not exist");
return err;
}
tmp = psmi_opened_endpoint;
while (tmp && tmp != ep) {
tmp = tmp->user_ep_next;
}
if (!tmp) {
err = psmi_handle_error(NULL, PSM_EP_WAS_CLOSED,
"PSM Endpoint is closed or does not exist");
return err;
}
psmi_getenv("PSM_CLOSE_TIMEOUT",
"End-point close timeout over-ride.",
PSMI_ENVVAR_LEVEL_USER, PSMI_ENVVAR_TYPE_UINT,
(union psmi_envvar_val)0, &timeout_intval);
if (getenv("PSM_CLOSE_TIMEOUT")) {
timeout_in = timeout_intval.e_uint * SEC_ULL;
} else if (timeout_in > 0) {
/* The timeout parameter provides the minimum timeout. A heuristic
* is used to scale up the timeout linearly with the number of
* endpoints, and we allow one second per 100 endpoints. */
timeout_in = max(timeout_in, (ep->connections * SEC_ULL) / 100);
}
if (timeout_in > 0 && timeout_in < PSMI_MIN_EP_CLOSE_TIMEOUT)
timeout_in = PSMI_MIN_EP_CLOSE_TIMEOUT;
/* Infinite and excessive close time-out are limited here to a max.
* The "rationale" is that there is no point waiting around forever for
* graceful termination. Normal (or forced) process termination should clean
* up the context state correctly even if termination is not graceful. */
if (timeout_in <= 0 || timeout_in < PSMI_MAX_EP_CLOSE_TIMEOUT)
timeout_in = PSMI_MAX_EP_CLOSE_TIMEOUT;
_HFI_PRDBG("Closing endpoint %p with force=%s and to=%.2f seconds and "
"%d connections\n",
ep, mode == PSM_EP_CLOSE_FORCE ? "YES" : "NO",
(double)timeout_in / 1e9, (int)ep->connections);
/* XXX We currently cheat in the sense that we leave each PTL the allowed
* timeout. There's no good way to do this until we change the PTL
* interface to allow asynchronous finalization
*/
mep = ep;
tmp = ep->mctxt_prev;
do {
ep = tmp;
tmp = ep->mctxt_prev;
PSM_MCTXT_REMOVE(ep);
if (psmi_ep_device_is_enabled(ep, PTL_DEVID_AMSH))
err =
psmi_ptl_amsh.fini(ep->ptl_amsh.ptl, mode,
timeout_in);
if ((err == PSM_OK || err == PSM_TIMEOUT) &&
psmi_ep_device_is_enabled(ep, PTL_DEVID_IPS))
err =
psmi_ptl_ips.fini(ep->ptl_ips.ptl, mode,
timeout_in);
/* If there's timeouts in the disconnect requests,
* still make sure that we still get to close the
*endpoint and mark it closed */
if (psmi_ep_device_is_enabled(ep, PTL_DEVID_IPS))
psmi_context_close(&ep->context);
psmi_free(ep->epaddr);
psmi_free(ep->context_mylabel);
/*
* Before freeing the master ep itself,
* remove it from the global linklist.
* We do it here to let atexit handler in ptl_am directory
* to search the global linklist and free the shared memory file.
*/
if (ep == mep) {
if (psmi_opened_endpoint == ep) {
psmi_opened_endpoint = ep->user_ep_next;
} else {
tmp = psmi_opened_endpoint;
while (tmp->user_ep_next != ep) {
tmp = tmp->user_ep_next;
}
tmp->user_ep_next = ep->user_ep_next;
}
psmi_opened_endpoint_count--;
}
psmi_free(ep);
} while ((err == PSM_OK || err == PSM_TIMEOUT) && tmp != ep);
PSMI_PUNLOCK();
_HFI_PRDBG("Closed endpoint in %.3f secs\n",
(double)cycles_to_nanosecs(get_cycles() -
t_start) / SEC_ULL);
return err;
}
