bool nav_spiral_run(void)
{
struct EnuCoor_f pos_enu = *stateGetPositionEnu_f();
VECT2_DIFF(nav_spiral.trans_current, pos_enu, nav_spiral.center);
nav_spiral.dist_from_center = FLOAT_VECT3_NORM(nav_spiral.trans_current);
float DistanceStartEstim;
float CircleAlpha;
switch (nav_spiral.status) {
case SpiralOutside:
//flys until center of the helix is reached an start helix
nav_route_xy(nav_spiral.fly_from.x, nav_spiral.fly_from.y, nav_spiral.center.x, nav_spiral.center.y);
// center reached?
if (nav_approaching_xy(nav_spiral.center.x, nav_spiral.center.y, nav_spiral.fly_from.x, nav_spiral.fly_from.y, 0)) {
// nadir image
#ifdef DIGITAL_CAM
dc_send_command(DC_SHOOT);
#endif
nav_spiral.status = SpiralStartCircle;
}
break;
case SpiralStartCircle:
// Starts helix
// storage of current coordinates
// calculation needed, State switch to SpiralCircle
nav_circle_XY(nav_spiral.center.y, nav_spiral.center.y, nav_spiral.radius_start);
if (nav_spiral.dist_from_center >= nav_spiral.radius_start) {
VECT2_COPY(nav_spiral.last_circle, pos_enu);
nav_spiral.status = SpiralCircle;
// Start helix
#ifdef DIGITAL_CAM
dc_Circle(360 / nav_spiral.segments);
#endif
}
break;
case SpiralCircle: {
nav_circle_XY(nav_spiral.center.x, nav_spiral.center.y, nav_spiral.radius_start);
// Trigonometrische Berechnung des bereits geflogenen Winkels alpha
// equation:
// alpha = 2 * asin ( |Starting position angular - current positon| / (2* nav_spiral.radius_start)
// if alphamax already reached, increase radius.
//DistanceStartEstim = |Starting position angular - current positon|
struct FloatVect2 pos_diff;
VECT2_DIFF(pos_diff, nav_spiral.last_circle, pos_enu);
DistanceStartEstim = float_vect2_norm(&pos_diff);
CircleAlpha = (2.0 * asin(DistanceStartEstim / (2 * nav_spiral.radius_start)));
if (CircleAlpha >= nav_spiral.alpha_limit) {
VECT2_COPY(nav_spiral.last_circle, pos_enu);
nav_spiral.status = SpiralInc;
}
break;
}
case SpiralInc:
// increasing circle radius as long as it is smaller than max helix radius
if (nav_spiral.radius_start + nav_spiral.radius_increment < nav_spiral.radius) {
nav_spiral.radius_start = nav_spiral.radius_start + nav_spiral.radius_increment;
#ifdef DIGITAL_CAM
if (dc_cam_tracing) {
// calculating Cam angle for camera alignment
nav_spiral.trans_current.z = stateGetPositionUtm_f()->alt - nav_spiral.center.z;
dc_cam_angle = atan(nav_spiral.radius_start / nav_spiral.trans_current.z) * 180 / M_PI;
}
#endif
} else {
nav_spiral.radius_start = nav_spiral.radius;
#ifdef DIGITAL_CAM
// Stopps DC
dc_stop();
#endif
}
nav_spiral.status = SpiralCircle;
break;
default:
break;
}
NavVerticalAutoThrottleMode(0.); /* No pitch */
NavVerticalAltitudeMode(nav_spiral.center.z, 0.); /* No preclimb */
return true;
}
bool_t SpiralNav(void)
{
TransCurrentX = estimator_x - WaypointX(Center);
TransCurrentY = estimator_y - WaypointY(Center);
DistanceFromCenter = sqrt(TransCurrentX*TransCurrentX+TransCurrentY*TransCurrentY);
float DistanceStartEstim;
float CircleAlpha;
switch(CSpiralStatus)
{
case Outside:
//flys until center of the helix is reached an start helix
nav_route_xy(FlyFromX,FlyFromY,WaypointX(Center), WaypointY(Center));
// center reached?
if (nav_approaching_xy(WaypointX(Center), WaypointY(Center), FlyFromX, FlyFromY, 0)) {
// nadir image
#ifdef DIGITAL_CAM
dc_send_command(DC_SHOOT);
#endif
CSpiralStatus = StartCircle;
}
break;
case StartCircle:
// Starts helix
// storage of current coordinates
// calculation needed, State switch to Circle
nav_circle_XY(WaypointX(Center), WaypointY(Center), SRad);
if(DistanceFromCenter >= SRad){
LastCircleX = estimator_x;
LastCircleY = estimator_y;
CSpiralStatus = Circle;
// Start helix
#ifdef DIGITAL_CAM
dc_Circle(360/Segmente);
#endif
}
break;
case Circle: {
nav_circle_XY(WaypointX(Center), WaypointY(Center), SRad);
// Trigonometrische Berechnung des bereits geflogenen Winkels alpha
// equation:
// alpha = 2 * asin ( |Starting position angular - current positon| / (2* SRad)
// if alphamax already reached, increase radius.
//DistanceStartEstim = |Starting position angular - current positon|
DistanceStartEstim = sqrt (((LastCircleX-estimator_x)*(LastCircleX-estimator_x))
+ ((LastCircleY-estimator_y)*(LastCircleY-estimator_y)));
CircleAlpha = (2.0 * asin (DistanceStartEstim / (2 * SRad)));
if (CircleAlpha >= Alphalimit) {
LastCircleX = estimator_x;
LastCircleY = estimator_y;
CSpiralStatus = IncSpiral;
}
break;
}
case IncSpiral:
// increasing circle radius as long as it is smaller than max helix radius
if(SRad + IRad < Spiralradius)
{
SRad = SRad + IRad;
#ifdef DIGITAL_CAM
if (dc_cam_tracing) {
// calculating Cam angle for camera alignment
TransCurrentZ = estimator_z - ZPoint;
dc_cam_angle = atan(SRad/TransCurrentZ) * 180 / M_PI;
}
#endif
}
else {
SRad = Spiralradius;
#ifdef DIGITAL_CAM
// Stopps DC
dc_stop();
#endif
}
CSpiralStatus = Circle;
break;
default:
break;
}
return TRUE;
}
