/*
* We have a good packet, get it out of the adapter.
*/
static void de600_rx_intr(struct net_device *dev)
{
struct sk_buff *skb;
int i;
int read_from;
int size;
unsigned char *buffer;
/* Get size of received packet */
size = de600_read_byte(RX_LEN, dev); /* low byte */
size += (de600_read_byte(RX_LEN, dev) << 8); /* high byte */
size -= 4; /* Ignore trailing 4 CRC-bytes */
/* Tell adapter where to store next incoming packet, enable receiver */
read_from = rx_page_adr();
next_rx_page();
de600_put_command(RX_ENABLE);
if ((size < 32) || (size > 1535)) {
printk(KERN_WARNING "%s: Bogus packet size %d.\n", dev->name, size);
if (size > 10000)
adapter_init(dev);
return;
}
skb = dev_alloc_skb(size+2);
if (skb == NULL) {
printk("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, size);
return;
}
/* else */
skb->dev = dev;
skb_reserve(skb,2); /* Align */
/* 'skb->data' points to the start of sk_buff data area. */
buffer = skb_put(skb,size);
/* copy the packet into the buffer */
de600_setup_address(read_from, RW_ADDR);
for (i = size; i > 0; --i, ++buffer)
*buffer = de600_read_byte(READ_DATA, dev);
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
/* update stats */
dev->last_rx = jiffies;
((struct net_device_stats *)(dev->priv))->rx_packets++; /* count all receives */
((struct net_device_stats *)(dev->priv))->rx_bytes += size; /* count all received bytes */
/*
* If any worth-while packets have been received, netif_rx()
* will work on them when we get to the tasklets.
*/
}
/*
* We have a good packet, get it out of the adapter.
*/
static void
de600_rx_intr(struct device *dev)
{
struct sk_buff *skb;
int i;
int read_from;
int size;
register unsigned char *buffer;
cli();
/* Get size of received packet */
size = de600_read_byte(RX_LEN, dev); /* low byte */
size += (de600_read_byte(RX_LEN, dev) << 8); /* high byte */
size -= 4; /* Ignore trailing 4 CRC-bytes */
/* Tell adapter where to store next incoming packet, enable receiver */
read_from = rx_page_adr();
next_rx_page();
de600_put_command(RX_ENABLE);
sti();
if ((size < 32) || (size > 1535)) {
printk("%s: Bogus packet size %d.\n", dev->name, size);
if (size > 10000)
adapter_init(dev);
return;
}
skb = alloc_skb(size, GFP_ATOMIC);
sti();
if (skb == NULL) {
printk("%s: Couldn't allocate a sk_buff of size %d.\n",
dev->name, size);
return;
}
/* else */
skb->lock = 0;
/* 'skb->data' points to the start of sk_buff data area. */
buffer = skb->data;
/* copy the packet into the buffer */
de600_setup_address(read_from, RW_ADDR);
for (i = size; i > 0; --i, ++buffer)
*buffer = de600_read_byte(READ_DATA, dev);
((struct netstats *)(dev->priv))->rx_packets++; /* count all receives */
if (dev_rint((unsigned char *)skb, size, IN_SKBUFF, dev))
printk("%s: receive buffers full.\n", dev->name);
/*
* If any worth-while packets have been received, dev_rint()
* has done a mark_bh(INET_BH) for us and will work on them
* when we get to the bottom-half routine.
*/
}
static void de600_rx_intr(struct net_device *dev)
{
struct sk_buff *skb;
int i;
int read_from;
int size;
unsigned char *buffer;
/* */
size = de600_read_byte(RX_LEN, dev); /* */
size += (de600_read_byte(RX_LEN, dev) << 8); /* */
size -= 4; /* */
/* */
read_from = rx_page_adr();
next_rx_page();
de600_put_command(RX_ENABLE);
if ((size < 32) || (size > 1535)) {
printk(KERN_WARNING "%s: Bogus packet size %d.\n", dev->name, size);
if (size > 10000)
adapter_init(dev);
return;
}
skb = netdev_alloc_skb(dev, size + 2);
if (skb == NULL) {
printk("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, size);
return;
}
/* */
skb_reserve(skb,2); /* */
/* */
buffer = skb_put(skb,size);
/* */
de600_setup_address(read_from, RW_ADDR);
for (i = size; i > 0; --i, ++buffer)
*buffer = de600_read_byte(READ_DATA, dev);
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
/* */
dev->stats.rx_packets++; /* */
dev->stats.rx_bytes += size; /* */
/*
*/
}
static int adapter_init(struct net_device *dev)
{
int i;
select_nic();
rx_page = 0; /* used by RESET */
de600_put_command(RESET);
de600_put_command(STOP_RESET);
/* Check if it is still there... */
/* Get the some bytes of the adapter ethernet address from the ROM */
de600_setup_address(NODE_ADDRESS, RW_ADDR);
de600_read_byte(READ_DATA, dev);
if ((de600_read_byte(READ_DATA, dev) != 0xde) ||
(de600_read_byte(READ_DATA, dev) != 0x15)) {
/* was: if (de600_read_status(dev) & 0xf0) { */
printk("Something has happened to the DE-600! Please check it and do a new ifconfig!\n");
/* Goodbye, cruel world... */
dev->flags &= ~IFF_UP;
de600_close(dev);
was_down = 1;
netif_stop_queue(dev); /* Transmit busy... */
return 1; /* failed */
}
if (was_down) {
printk(KERN_INFO "%s: Thanks, I feel much better now!\n", dev->name);
was_down = 0;
}
tx_fifo_in = 0;
tx_fifo_out = 0;
free_tx_pages = TX_PAGES;
/* set the ether address. */
de600_setup_address(NODE_ADDRESS, RW_ADDR);
for (i = 0; i < ETH_ALEN; i++)
de600_put_byte(dev->dev_addr[i]);
/* where to start saving incoming packets */
rx_page = RX_BP | RX_BASE_PAGE;
de600_setup_address(MEM_4K, RW_ADDR);
/* Enable receiver */
de600_put_command(RX_ENABLE);
select_prn();
netif_start_queue(dev);
return 0; /* OK */
}
static int adapter_init(struct net_device *dev)
{
int i;
select_nic();
rx_page = 0;
de600_put_command(RESET);
de600_put_command(STOP_RESET);
de600_setup_address(NODE_ADDRESS, RW_ADDR);
de600_read_byte(READ_DATA, dev);
if ((de600_read_byte(READ_DATA, dev) != 0xde) ||
(de600_read_byte(READ_DATA, dev) != 0x15)) {
printk("Something has happened to the DE-600! Please check it and do a new ifconfig!\n");
dev->flags &= ~IFF_UP;
de600_close(dev);
was_down = 1;
netif_stop_queue(dev);
return 1;
}
if (was_down) {
printk(KERN_INFO "%s: Thanks, I feel much better now!\n", dev->name);
was_down = 0;
}
tx_fifo_in = 0;
tx_fifo_out = 0;
free_tx_pages = TX_PAGES;
de600_setup_address(NODE_ADDRESS, RW_ADDR);
for (i = 0; i < ETH_ALEN; i++)
de600_put_byte(dev->dev_addr[i]);
rx_page = RX_BP | RX_BASE_PAGE;
de600_setup_address(MEM_4K, RW_ADDR);
de600_put_command(RX_ENABLE);
select_prn();
netif_start_queue(dev);
return 0;
}
static struct net_device * __init de600_probe(void)
{
int i;
struct net_device *dev;
int err;
dev = alloc_etherdev(sizeof(struct net_device_stats));
if (!dev)
return ERR_PTR(-ENOMEM);
SET_MODULE_OWNER(dev);
if (!request_region(DE600_IO, 3, "de600")) {
printk(KERN_WARNING "DE600: port 0x%x busy\n", DE600_IO);
err = -EBUSY;
goto out;
}
printk(KERN_INFO "%s: D-Link DE-600 pocket adapter", dev->name);
/* Alpha testers must have the version number to report bugs. */
if (de600_debug > 1)
printk(version);
/* probe for adapter */
err = -ENODEV;
rx_page = 0;
select_nic();
(void)de600_read_status(dev);
de600_put_command(RESET);
de600_put_command(STOP_RESET);
if (de600_read_status(dev) & 0xf0) {
printk(": not at I/O %#3x.\n", DATA_PORT);
goto out1;
}
/*
* Maybe we found one,
* have to check if it is a D-Link DE-600 adapter...
*/
/* Get the adapter ethernet address from the ROM */
de600_setup_address(NODE_ADDRESS, RW_ADDR);
for (i = 0; i < ETH_ALEN; i++) {
dev->dev_addr[i] = de600_read_byte(READ_DATA, dev);
dev->broadcast[i] = 0xff;
}
/* Check magic code */
if ((dev->dev_addr[1] == 0xde) && (dev->dev_addr[2] == 0x15)) {
/* OK, install real address */
dev->dev_addr[0] = 0x00;
dev->dev_addr[1] = 0x80;
dev->dev_addr[2] = 0xc8;
dev->dev_addr[3] &= 0x0f;
dev->dev_addr[3] |= 0x70;
} else {
printk(" not identified in the printer port\n");
goto out1;
}
printk(", Ethernet Address: %02X", dev->dev_addr[0]);
for (i = 1; i < ETH_ALEN; i++)
printk(":%02X",dev->dev_addr[i]);
printk("\n");
dev->get_stats = get_stats;
dev->open = de600_open;
dev->stop = de600_close;
dev->hard_start_xmit = &de600_start_xmit;
dev->flags&=~IFF_MULTICAST;
select_prn();
err = register_netdev(dev);
if (err)
goto out1;
return dev;
out1:
release_region(DE600_IO, 3);
out:
free_netdev(dev);
return ERR_PTR(err);
}
static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
unsigned long flags;
int transmit_from;
int len;
int tickssofar;
u8 *buffer = skb->data;
int i;
if (free_tx_pages <= 0) { /* Do timeouts, to avoid hangs. */
tickssofar = jiffies - dev->trans_start;
if (tickssofar < 5)
return 1;
/* else */
printk(KERN_WARNING "%s: transmit timed out (%d), %s?\n", dev->name, tickssofar, "network cable problem");
/* Restart the adapter. */
spin_lock_irqsave(&de600_lock, flags);
if (adapter_init(dev)) {
spin_unlock_irqrestore(&de600_lock, flags);
return 1;
}
spin_unlock_irqrestore(&de600_lock, flags);
}
/* Start real output */
PRINTK(("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages));
if ((len = skb->len) < RUNT)
len = RUNT;
spin_lock_irqsave(&de600_lock, flags);
select_nic();
tx_fifo[tx_fifo_in] = transmit_from = tx_page_adr(tx_fifo_in) - len;
tx_fifo_in = (tx_fifo_in + 1) % TX_PAGES; /* Next free tx page */
if(check_lost)
{
/* This costs about 40 instructions per packet... */
de600_setup_address(NODE_ADDRESS, RW_ADDR);
de600_read_byte(READ_DATA, dev);
if (was_down || (de600_read_byte(READ_DATA, dev) != 0xde)) {
if (adapter_init(dev)) {
spin_unlock_irqrestore(&de600_lock, flags);
return 1;
}
}
}
de600_setup_address(transmit_from, RW_ADDR);
for (i = 0; i < skb->len ; ++i, ++buffer)
de600_put_byte(*buffer);
for (; i < len; ++i)
de600_put_byte(0);
if (free_tx_pages-- == TX_PAGES) { /* No transmission going on */
dev->trans_start = jiffies;
netif_start_queue(dev); /* allow more packets into adapter */
/* Send page and generate a faked interrupt */
de600_setup_address(transmit_from, TX_ADDR);
de600_put_command(TX_ENABLE);
}
else {
if (free_tx_pages)
netif_start_queue(dev);
else
netif_stop_queue(dev);
select_prn();
}
spin_unlock_irqrestore(&de600_lock, flags);
dev_kfree_skb(skb);
return 0;
}
int __init
de600_probe(struct net_device *dev)
{
int i;
static struct net_device_stats de600_netstats;
/*dev->priv = kmalloc(sizeof(struct net_device_stats), GFP_KERNEL);*/
SET_MODULE_OWNER(dev);
printk("%s: D-Link DE-600 pocket adapter", dev->name);
/* Alpha testers must have the version number to report bugs. */
if (de600_debug > 1)
printk(version);
/* probe for adapter */
rx_page = 0;
select_nic();
(void)de600_read_status(dev);
de600_put_command(RESET);
de600_put_command(STOP_RESET);
if (de600_read_status(dev) & 0xf0) {
printk(": not at I/O %#3x.\n", DATA_PORT);
return -ENODEV;
}
/*
* Maybe we found one,
* have to check if it is a D-Link DE-600 adapter...
*/
/* Get the adapter ethernet address from the ROM */
de600_setup_address(NODE_ADDRESS, RW_ADDR);
for (i = 0; i < ETH_ALEN; i++) {
dev->dev_addr[i] = de600_read_byte(READ_DATA, dev);
dev->broadcast[i] = 0xff;
}
/* Check magic code */
if ((dev->dev_addr[1] == 0xde) && (dev->dev_addr[2] == 0x15)) {
/* OK, install real address */
dev->dev_addr[0] = 0x00;
dev->dev_addr[1] = 0x80;
dev->dev_addr[2] = 0xc8;
dev->dev_addr[3] &= 0x0f;
dev->dev_addr[3] |= 0x70;
} else {
printk(" not identified in the printer port\n");
return -ENODEV;
}
#if 0 /* Not yet */
if (check_region(DE600_IO, 3)) {
printk(", port 0x%x busy\n", DE600_IO);
return -EBUSY;
}
#endif
request_region(DE600_IO, 3, "de600");
printk(", Ethernet Address: %02X", dev->dev_addr[0]);
for (i = 1; i < ETH_ALEN; i++)
printk(":%02X",dev->dev_addr[i]);
printk("\n");
/* Initialize the device structure. */
dev->priv = &de600_netstats;
memset(dev->priv, 0, sizeof(struct net_device_stats));
dev->get_stats = get_stats;
dev->open = de600_open;
dev->stop = de600_close;
dev->hard_start_xmit = &de600_start_xmit;
ether_setup(dev);
dev->flags&=~IFF_MULTICAST;
select_prn();
return 0;
}
/*
* Copy a buffer to the adapter transmit page memory.
* Start sending.
*/
static int
de600_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
unsigned long flags;
int transmit_from;
int len;
int tickssofar;
byte *buffer = skb->data;
if (free_tx_pages <= 0) { /* Do timeouts, to avoid hangs. */
tickssofar = jiffies - dev->trans_start;
if (tickssofar < 5)
return 1;
/* else */
printk("%s: transmit timed out (%d), %s?\n",
dev->name,
tickssofar,
"network cable problem"
);
/* Restart the adapter. */
if (adapter_init(dev)) {
return 1;
}
}
/* Start real output */
PRINTK(("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages));
if ((len = skb->len) < RUNT)
len = RUNT;
save_flags(flags);
cli();
select_nic();
tx_fifo[tx_fifo_in] = transmit_from = tx_page_adr(tx_fifo_in) - len;
tx_fifo_in = (tx_fifo_in + 1) % TX_PAGES; /* Next free tx page */
#ifdef CHECK_LOST_DE600
/* This costs about 40 instructions per packet... */
de600_setup_address(NODE_ADDRESS, RW_ADDR);
de600_read_byte(READ_DATA, dev);
if (was_down || (de600_read_byte(READ_DATA, dev) != 0xde)) {
if (adapter_init(dev)) {
restore_flags(flags);
return 1;
}
}
#endif
de600_setup_address(transmit_from, RW_ADDR);
for ( ; len > 0; --len, ++buffer)
de600_put_byte(*buffer);
if (free_tx_pages-- == TX_PAGES) { /* No transmission going on */
dev->trans_start = jiffies;
netif_start_queue(dev); /* allow more packets into adapter */
/* Send page and generate a faked interrupt */
de600_setup_address(transmit_from, TX_ADDR);
de600_put_command(TX_ENABLE);
}
else {
if (free_tx_pages)
netif_start_queue(dev);
else
netif_stop_queue(dev);
select_prn();
}
restore_flags(flags);
#ifdef FAKE_SMALL_MAX
/* This will "patch" the socket TCP proto at an early moment */
if (skb->sk && (skb->sk->protocol == IPPROTO_TCP) &&
(skb->sk->prot->rspace != &de600_rspace))
skb->sk->prot->rspace = de600_rspace; /* Ugh! */
#endif
dev_kfree_skb (skb);
return 0;
}
static int
adapter_init(struct device *dev)
{
int i;
long flags;
save_flags(flags);
cli();
select_nic();
rx_page = 0; /* used by RESET */
de600_put_command(RESET);
de600_put_command(STOP_RESET);
#ifdef CHECK_LOST_DE600
/* Check if it is still there... */
/* Get the some bytes of the adapter ethernet address from the ROM */
de600_setup_address(NODE_ADDRESS, RW_ADDR);
de600_read_byte(READ_DATA, dev);
if ((de600_read_byte(READ_DATA, dev) != 0xde) ||
(de600_read_byte(READ_DATA, dev) != 0x15)) {
/* was: if (de600_read_status(dev) & 0xf0) { */
printk("Something has happened to the DE-600! Please check it"
#ifdef SHUTDOWN_WHEN_LOST
" and do a new ifconfig"
#endif /* SHUTDOWN_WHEN_LOST */
"!\n");
#ifdef SHUTDOWN_WHEN_LOST
/* Goodbye, cruel world... */
dev->flags &= ~IFF_UP;
de600_close(dev);
#endif /* SHUTDOWN_WHEN_LOST */
was_down = 1;
dev->tbusy = 1; /* Transmit busy... */
return 1; /* failed */
}
#endif /* CHECK_LOST_DE600 */
if (was_down) {
printk("Thanks, I feel much better now!\n");
was_down = 0;
}
dev->tbusy = 0; /* Transmit busy... */
dev->interrupt = 0;
tx_fifo_in = 0;
tx_fifo_out = 0;
free_tx_pages = TX_PAGES;
/* set the ether address. */
de600_setup_address(NODE_ADDRESS, RW_ADDR);
for (i = 0; i < ETH_ALEN; i++)
de600_put_byte(dev->dev_addr[i]);
/* where to start saving incoming packets */
rx_page = RX_BP | RX_BASE_PAGE;
de600_setup_address(MEM_4K, RW_ADDR);
/* Enable receiver */
de600_put_command(RX_ENABLE);
select_prn();
restore_flags(flags);
return 0; /* OK */
}
static struct net_device * __init de600_probe(void)
{
int i;
struct net_device *dev;
int err;
dev = alloc_etherdev(0);
if (!dev)
return ERR_PTR(-ENOMEM);
if (!request_region(DE600_IO, 3, "de600")) {
printk(KERN_WARNING "DE600: port 0x%x busy\n", DE600_IO);
err = -EBUSY;
goto out;
}
printk(KERN_INFO "%s: D-Link DE-600 pocket adapter", dev->name);
pr_debug("%s", version);
err = -ENODEV;
rx_page = 0;
select_nic();
(void)de600_read_status(dev);
de600_put_command(RESET);
de600_put_command(STOP_RESET);
if (de600_read_status(dev) & 0xf0) {
printk(": not at I/O %#3x.\n", DATA_PORT);
goto out1;
}
de600_setup_address(NODE_ADDRESS, RW_ADDR);
for (i = 0; i < ETH_ALEN; i++) {
dev->dev_addr[i] = de600_read_byte(READ_DATA, dev);
dev->broadcast[i] = 0xff;
}
if ((dev->dev_addr[1] == 0xde) && (dev->dev_addr[2] == 0x15)) {
dev->dev_addr[0] = 0x00;
dev->dev_addr[1] = 0x80;
dev->dev_addr[2] = 0xc8;
dev->dev_addr[3] &= 0x0f;
dev->dev_addr[3] |= 0x70;
} else {
printk(" not identified in the printer port\n");
goto out1;
}
printk(", Ethernet Address: %pM\n", dev->dev_addr);
dev->netdev_ops = &de600_netdev_ops;
dev->flags&=~IFF_MULTICAST;
select_prn();
err = register_netdev(dev);
if (err)
goto out1;
return dev;
out1:
release_region(DE600_IO, 3);
out:
free_netdev(dev);
return ERR_PTR(err);
}
static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
unsigned long flags;
int transmit_from;
int len;
int tickssofar;
u8 *buffer = skb->data;
int i;
if (free_tx_pages <= 0) {
tickssofar = jiffies - dev->trans_start;
if (tickssofar < 5)
return NETDEV_TX_BUSY;
printk(KERN_WARNING "%s: transmit timed out (%d), %s?\n", dev->name, tickssofar, "network cable problem");
spin_lock_irqsave(&de600_lock, flags);
if (adapter_init(dev)) {
spin_unlock_irqrestore(&de600_lock, flags);
return NETDEV_TX_BUSY;
}
spin_unlock_irqrestore(&de600_lock, flags);
}
pr_debug("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages);
if ((len = skb->len) < RUNT)
len = RUNT;
spin_lock_irqsave(&de600_lock, flags);
select_nic();
tx_fifo[tx_fifo_in] = transmit_from = tx_page_adr(tx_fifo_in) - len;
tx_fifo_in = (tx_fifo_in + 1) % TX_PAGES;
if(check_lost)
{
de600_setup_address(NODE_ADDRESS, RW_ADDR);
de600_read_byte(READ_DATA, dev);
if (was_down || (de600_read_byte(READ_DATA, dev) != 0xde)) {
if (adapter_init(dev)) {
spin_unlock_irqrestore(&de600_lock, flags);
return NETDEV_TX_BUSY;
}
}
}
de600_setup_address(transmit_from, RW_ADDR);
for (i = 0; i < skb->len ; ++i, ++buffer)
de600_put_byte(*buffer);
for (; i < len; ++i)
de600_put_byte(0);
if (free_tx_pages-- == TX_PAGES) {
dev->trans_start = jiffies;
netif_start_queue(dev);
de600_setup_address(transmit_from, TX_ADDR);
de600_put_command(TX_ENABLE);
}
else {
if (free_tx_pages)
netif_start_queue(dev);
else
netif_stop_queue(dev);
select_prn();
}
spin_unlock_irqrestore(&de600_lock, flags);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
