eQEP::eQEP(int eQEP_address):
eQEP_address_(eQEP_address)
{
if (eQEP_address_ < 3) {
switch (eQEP_address_) {
case 0:
eQEP_address_ = eQEP0;
break;
case 1:
eQEP_address_ = eQEP1;
break;
case 2:
eQEP_address_ = eQEP2;
break;
}
}
active = false;
eQEPFd = open("/dev/mem", O_RDWR | O_SYNC);
if (eQEPFd < 0)
{
debug(0, "eQEP class: Can't open /dev/mem\n");
return;
}
// Map the PWM memory range
map_pwm_register();
eqep_addr = pwm_addr + (eQEP_address_ & (getpagesize()-1));
position_p = (uint32_t *) (eqep_addr + EQEP_QPOSCNT);
debug(2, "eQEP successfully activated\n");
defaultSettings();
active = true;
}
// seteaza pozitie, rotatie, translatie
Object3D::Object3D(Vector3D *_translation, Vector3D *_rotation, Vector3D *_scale)
{
defaultSettings();
this->SetPosition(_translation);
this->SetRotation(_rotation);
this->SetScale(_scale);
}
void FilmGrainSettings::readSettings(KConfigGroup& group)
{
FilmGrainContainer prm;
FilmGrainContainer defaultPrm = defaultSettings();
prm.grainSize = group.readEntry(d->configGrainSizeEntry, defaultPrm.grainSize);
prm.photoDistribution = group.readEntry(d->configPhotoDistributionEntry, defaultPrm.photoDistribution);
prm.addLuminanceNoise = group.readEntry(d->configAddLumNoiseEntry, defaultPrm.addLuminanceNoise);
prm.lumaIntensity = group.readEntry(d->configIntensityLumAdjustmentEntry, defaultPrm.lumaIntensity);
prm.lumaShadows = group.readEntry(d->configShadowsLumAdjustmentEntry, defaultPrm.lumaShadows);
prm.lumaMidtones = group.readEntry(d->configMidtonesLumAdjustmentEntry, defaultPrm.lumaMidtones);
prm.lumaHighlights = group.readEntry(d->configHighlightsLumAdjustmentEntry, defaultPrm.lumaHighlights);
prm.addChrominanceBlueNoise = group.readEntry(d->configAddChromaBlueNoiseEntry, defaultPrm.addChrominanceBlueNoise);
prm.chromaBlueIntensity = group.readEntry(d->configIntensityChromaBlueAdjustmentEntry, defaultPrm.chromaBlueIntensity);
prm.chromaBlueShadows = group.readEntry(d->configShadowsChromaBlueAdjustmentEntry, defaultPrm.chromaBlueShadows);
prm.chromaBlueMidtones = group.readEntry(d->configMidtonesChromaBlueAdjustmentEntry, defaultPrm.chromaBlueMidtones);
prm.chromaBlueHighlights = group.readEntry(d->configHighlightsChromaBlueAdjustmentEntry, defaultPrm.chromaBlueHighlights);
prm.addChrominanceRedNoise = group.readEntry(d->configAddChromaRedNoiseEntry, defaultPrm.addChrominanceRedNoise);
prm.chromaRedIntensity = group.readEntry(d->configIntensityChromaRedAdjustmentEntry, defaultPrm.chromaRedIntensity);
prm.chromaRedShadows = group.readEntry(d->configShadowsChromaRedAdjustmentEntry, defaultPrm.chromaRedShadows);
prm.chromaRedMidtones = group.readEntry(d->configMidtonesChromaRedAdjustmentEntry, defaultPrm.chromaRedMidtones);
prm.chromaRedHighlights = group.readEntry(d->configHighlightsChromaRedAdjustmentEntry, defaultPrm.chromaRedHighlights);
setSettings(prm);
}
void MixerSettings::readSettings(KConfigGroup& group)
{
MixerContainer prm;
MixerContainer defaultPrm = defaultSettings();
prm.bMonochrome = group.readEntry(d->configMonochromeEntry, defaultPrm.bMonochrome);
prm.bPreserveLum = group.readEntry(d->configPreserveLuminosityEntry, defaultPrm.bPreserveLum);
prm.redRedGain = group.readEntry(d->configRedRedGainEntry, defaultPrm.redRedGain);
prm.redGreenGain = group.readEntry(d->configRedGreenGainEntry, defaultPrm.redGreenGain);
prm.redBlueGain = group.readEntry(d->configRedBlueGainEntry, defaultPrm.redBlueGain);
prm.greenRedGain = group.readEntry(d->configGreenRedGainEntry, defaultPrm.greenRedGain);
prm.greenGreenGain = group.readEntry(d->configGreenGreenGainEntry, defaultPrm.greenGreenGain);
prm.greenBlueGain = group.readEntry(d->configGreenBlueGainEntry, defaultPrm.greenBlueGain);
prm.blueRedGain = group.readEntry(d->configBlueRedGainEntry, defaultPrm.blueRedGain);
prm.blueGreenGain = group.readEntry(d->configBlueGreenGainEntry, defaultPrm.blueGreenGain);
prm.blueBlueGain = group.readEntry(d->configBlueBlueGainEntry, defaultPrm.blueBlueGain);
prm.blackRedGain = group.readEntry(d->configBlackRedGainEntry, defaultPrm.blackRedGain);
prm.blackGreenGain = group.readEntry(d->configBlackGreenGainEntry, defaultPrm.blackGreenGain);
prm.blackBlueGain = group.readEntry(d->configBlackBlueGainEntry, defaultPrm.blackBlueGain);
setSettings(prm);
}
Firewall::Firewall() : flood_messages(0), right_after_connection(false)
{
kdebugf();
loadSecuredList();
lastMsg.start();
lastNotify.start();
pattern.setCaseSensitive(false);
pattern.setPattern(unicode2std(config_file.readEntry("Firewall", "answer", tr("I want something"))));
Protocol *gadu = AccountManager::instance()->defaultAccount()->protocol();
connect(gadu, SIGNAL(rawGaduReceivedMessageFilter(Protocol *, UserListElements, QString&, QByteArray&, bool&)), this, SLOT(messageFiltering(Protocol *, UserListElements, QString&, QByteArray&, bool&)));
connect(gadu, SIGNAL(sendMessageFiltering(const UserListElements, QByteArray &, bool &)), this, SLOT(sendMessageFilter(const UserListElements, QByteArray &, bool &)));
connect(chat_manager, SIGNAL(chatWidgetDestroying(ChatWidget *)), this, SLOT(chatDestroyed(ChatWidget *)));
connect(userlist, SIGNAL(userDataChanged(UserListElement, QString, QVariant, QVariant, bool, bool)), this, SLOT(userDataChanged(UserListElement, QString, QVariant, QVariant, bool, bool)));
connect(userlist, SIGNAL(userAdded(UserListElement, bool, bool)), this, SLOT(userAdded(UserListElement, bool, bool)));
connect(userlist, SIGNAL(userRemoved(UserListElement, bool, bool)), this, SLOT(userRemoved(UserListElement, bool, bool)));
connect(gadu, SIGNAL(connecting()), this, SLOT(connecting()));
connect(gadu, SIGNAL(connected()), this, SLOT(connected()));
defaultSettings();
kdebugf2();
}
void SettingsTest::testUpgrade_data(){
// Read recipe
QFile recipe(":/testdata/upgrade/recipe");
QVERIFY(recipe.open(QIODevice::ReadOnly));
QList<UpgradeTestHelper::TestCase> testCases = UpgradeTestHelper::readRecipe(&recipe);
// Generate settings file according to recipe
QTemporaryFile settingsFile;
QVERIFY(settingsFile.open() == true);
QSettings settings(settingsFile.fileName(), QSettings::IniFormat);
UpgradeTestHelper::fillSettings(&settings, testCases);
// Generate defaults file according to recipe
QTemporaryFile defaultSettingsFile;
QVERIFY(defaultSettingsFile.open() == true);
QSettings defaultSettings(defaultSettingsFile.fileName(), QSettings::IniFormat);
UpgradeTestHelper::fillDefaultSettings(&defaultSettings, testCases);
// Parse settings -- do upgrade
#if 0
settingsFile.seek(0);
defaultSettingsFile.seek(0);
qDebug() << "SETTINGS {{{\n" << settingsFile.readAll() << "\n}}}";
qDebug() << "DEFAULT SETTINGS {{{\n" << defaultSettingsFile.readAll() << "\n}}}";
#endif
SsuSettings ssuSettings(settingsFile.fileName(), QSettings::IniFormat,
defaultSettingsFile.fileName());
#if 0
settingsFile.seek(0);
qDebug() << "SETTINGS UPGRADED {{{\n" << settingsFile.readAll() << "\n}}}";
#endif
// Record data for verification phase
QTest::addColumn<bool>("keyIsSet");
QTest::addColumn<bool>("keyShouldBeSet");
QTest::addColumn<QString>("actualValue");
QTest::addColumn<QString>("expectedValue");
foreach (const UpgradeTestHelper::TestCase &testCase, testCases){
foreach (const QString &group, UpgradeTestHelper::groups()){
const QString key = group.isEmpty() ? testCase.key() : group + '/' + testCase.key();
QTest::newRow(qPrintable(QString("%1%2:%3:%4")
.arg(group.isEmpty() ? "" : group + "/")
.arg(testCase.history())
.arg(testCase.current())
.arg(testCase.expected())))
<< ssuSettings.contains(key)
<< testCase.keyShouldBeSet()
<< ssuSettings.value(key).toString()
<< testCase.expected();
}
}
void NoiseGen::reloadDefaultSettings()
{
defaultSettings();
std::cout << "loaded default settings\n";
initTerrainSlider(); // memory leak?
std::cout << "initialized terrain slider\n";
updateSliders(NULL);
std::cout << "updated sliders\n";
//refresh = true;
}
NoiseGen::NoiseGen()
{
//init seed
srand( time(NULL) );
IMAGE_SIZE = 256;
IMAGE_SCALE = 2;
terrainmode = false;
//paramvalues.resize(9);
terSlider = NULL;
//load settings
defaultSettings(); // load hardcoded defaults first
loadSettings(); // load settings file, if one is not found, create one
//init screen
screen = new sf::RenderWindow( sf::VideoMode(IMAGE_SIZE*IMAGE_SCALE+RIGHT_MARGIN_WIDTH,IMAGE_SIZE*IMAGE_SCALE+BOTTOM_MARGIN_HEIGHT,32), "Simplex Noise");
screen->setIcon(sfml_icon.width, sfml_icon.height, sfml_icon.pixel_data);
mapTexture = new sf::RenderTexture;
mapTexture->create(IMAGE_SCALE*IMAGE_SIZE, IMAGE_SCALE*IMAGE_SIZE);
mapTexture->display();
//load font
font.loadFromFile("font.ttf");
//init terrain colors
/*
terraincolors.push_back(sf::Color(0,0,120)); // deep water
terraincolors.push_back(sf::Color(0,0,220)); // shallow water
terraincolors.push_back(sf::Color(200,200,0)); // sand
terraincolors.push_back(sf::Color(200,120,50)); // dirt
terraincolors.push_back(sf::Color(0,220,0)); // low grass
terraincolors.push_back(sf::Color(0,120,0)); // high grass
terraincolors.push_back(sf::Color(120,120,120)); // low mtn
terraincolors.push_back(sf::Color(200,200,200)); // high mtn
terraincolors.push_back(sf::Color(245,245,245)); // mtn tops
*/
//other object inits
initSliders();
initTerrainSlider();
initButtons();
//start main loop
mainLoop();
}
StripToolVariable::StripToolVariable(StripToolVariableInfo *info, QObject *parent) :
QObject(parent)
{
info_ = 0;
data_ = 0;
series_ = 0;
setInfo(info);
buildComponents();
makeConnections();
defaultSettings();
qDebug() << "StripToolVariable object created.";
}
/*-----------------------------------------------------------------------------
name :getCoutStatement
description :return string representing a converted printf into cout
parameters :/
return :string
exceptions :/
algorithm :
-----------------------------------------------------------------------------*/
string PrintConverter::getCoutStatement(){
string retStr="cout<<";
if( format.size() < 3 ){ //special case for empty format string
retStr = "cout << \"\"";
for( unsigned int i = 0; i<args.size();i++){
retStr+="<<"+args[i].getArg();
}
retStr += ";";
return retStr;
}
string outStr="";
format=string(format,1,format.size()-2); //strip leading and trailing "
string coutFormatSpec="";
while(pos<format.size()){
if(isFormatSpec(coutFormatSpec)){
//copy the string and an argument after it
retStr+="\""+outStr+"\"<<";
outStr="";
if(argpos<args.size()){
if((coutFormatSpec.size()>0)||(flags.size()>0)){
retStr+=customFlags();
retStr+=coutFormatSpec; //stream formatting string
retStr+=args[argpos].getArg()+
";\n"+defaultSettings();
}
else{
retStr+=args[argpos].getArg()+"<<";
}
}
else{
cerr<<"not enough arguments corresponding to format string of cout"<<endl;
return retStr;
}
argpos++;
}//if(isFormatSpec...
if(pos<format.size()) outStr+=format[pos];
pos++;
}
retStr+="\""+outStr+"\";"; //output the remaining text in outStr and flush
return retStr;
}
void NRSettings::readSettings(KConfigGroup& group)
{
NRContainer prm;
NRContainer defaultPrm = defaultSettings();
prm.thresholds[0] = group.readEntry(d->configThrLumInputAdjustmentEntry, defaultPrm.thresholds[0]);
prm.thresholds[1] = group.readEntry(d->configThrCbInputAdjustmentEntry, defaultPrm.thresholds[1]);
prm.thresholds[2] = group.readEntry(d->configThrCrInputAdjustmentEntry, defaultPrm.thresholds[2]);
prm.softness[0] = group.readEntry(d->configSoftLumInputAdjustmentEntry, defaultPrm.softness[0]);
prm.softness[1] = group.readEntry(d->configSoftCbInputAdjustmentEntry, defaultPrm.softness[1]);
prm.softness[2] = group.readEntry(d->configSoftCrInputAdjustmentEntry, defaultPrm.softness[2]);
bool b = group.readEntry(d->configCheckAutoEstimationEntry, false);
d->checkAutoEst->setChecked(b);
slotDisableParameters(b);
if (!b)
setSettings(prm);
}
void XSettingsModel::read_default_ini()
{
QString defaultSettings("");
switch (mainObject->runningOs()) {
case OS_MAC:
defaultSettings = ":/default/osx_default.ini";
break;
case OS_WINDOWS:
defaultSettings = ":/default/win_default.ini";
break;
case OS_LINUX:
defaultSettings = ":/default/x_default.ini";
break;
default:
outLog("*** FGx shout: No default settings for this system");
break;
}
QSettings settings(defaultSettings,QSettings::IniFormat);
bool ena;
for(int row_idx=0; row_idx < rowCount(); row_idx++){
//= loop rows and load each "option" as an [ini section] with enabled, value as values
settings.beginGroup(item(row_idx, C_OPTION)->text());
ena = settings.value("enabled").toBool() ;
item(row_idx, C_ENABLED)->setText( ena ? "1" : "0");
QString val = settings.value("value").toString();
if(val == ""){
val = item(row_idx, C_DEFAULT)->text();
}
item(row_idx, C_VALUE)->setText(val );
set_row_bg(row_idx, ena ? QColor(200,255,200) : QColor(240,240,240));
//= Broadcast changes
emit upx(item(row_idx, C_OPTION)->text(),
item(row_idx, C_ENABLED)->text() == "1",
item(row_idx, C_VALUE)->text()
);
settings.endGroup();
}
//qDebug() << "Read ini";
emit updated(get_fgfs_list());
}
ShutterToolMainWindow::ShutterToolMainWindow(QWidget *parent)
: QWidget(parent)
{
setAttribute(Qt::WA_ShowWithoutActivating);
model_ = 0;
mainLayout_ = 0;
appStatusLabel_ = 0;
enableAutomaticShuttersOpenButton_ = 0;
enableAutomaticShuttersOpenButton_ = 0;
shuttersStatusLabel_ = 0;
openShuttersButton_ = 0;
closeShuttersButton_ = 0;
createComponents();
defaultSettings();
makeConnections();
}
// Constructor
ViewerWindow::ViewerWindow(QWidget *parent) : QMainWindow(parent), ui(new Ui::ViewerWindow)
{
// Set the user interface from Qt Designer
ui->setupUi(this);
ui->centralWidget->setVisible(false);
// Default Value for Settings
defaultSettings();
// Settings
readSettings();
myCloudList = new CloudListModel();
ui->myCloudList->setModel(myCloudList);
ui->myCloudViewer->setModel(myCloudList);
}
void MysqLoader::on_defaultButton_clicked()
{
QMessageBox msgBox;
msgBox.setWindowTitle(trUtf8("Vorgang bestätigen"));
msgBox.setText(trUtf8("<b>Alle Werte werden auf die "
"Standardeinstellungen zurück gesetzt!</b>"));
msgBox.setIcon(QMessageBox::Question);
msgBox.setStandardButtons(QMessageBox::Yes | QMessageBox::No);
msgBox.setDefaultButton(QMessageBox::Yes);
int ret = msgBox.exec();
switch (ret) {
case QMessageBox::Yes:
defaultSettings();
break;
case QMessageBox::No:
msgBox.close();
break;
default:
break;
}
}
StripTool::StripTool(QWidget *parent) : QWidget(parent)
{
appDirectory_ = 0;
model_ = 0;
mainView_ = 0;
importer_ = 0;
exporter_ = 0;
editor_ = 0;
setAppDirectory(QDir(QDir::homePath()).filePath("StripTool"));
buildComponents();
makeConnections();
defaultSettings();
QVBoxLayout *windowLayout = new QVBoxLayout();
windowLayout->addWidget(mainView_);
setLayout(windowLayout);
resize(800, 500);
qDebug() << "StripTool object created.";
}
Vehicle::Vehicle(char *cullorder):Primitiva(data,cullorder)
{
vector<float> defaultSettings(4,0.5);
m = new Material(NULL, defaultSettings, defaultSettings, defaultSettings, defaultSettings, 1, 1, 1, GL_FRONT_AND_BACK);
m2 = new Material(NULL, defaultSettings, defaultSettings, defaultSettings, defaultSettings, 1, 1, 1, GL_FRONT_AND_BACK);
vector<float> data;
data.push_back(-BALLOON_SIDE/2.0);
data.push_back(-BALLOON_SIDE/2.0);
data.push_back(BALLOON_SIDE/2.0);
data.push_back(BALLOON_SIDE/2.0);
f1 = new Rectangle(data, cullorder, "flat");
f2 = new Rectangle(data, cullorder, "flat");
f3 = new Rectangle(data, cullorder, "flat");
f4 = new Rectangle(data, cullorder, "flat");
f5 = new Rectangle(data, cullorder, "flat");
}
int Calculator::qt_metacall(QMetaObject::Call _c, int _id, void **_a)
{
_id = QMainWindow::qt_metacall(_c, _id, _a);
if (_id < 0)
return _id;
if (_c == QMetaObject::InvokeMetaMethod) {
switch (_id) {
case 0: decSystem(); break;
case 1: binSystem(); break;
case 2: octSystem(); break;
case 3: hexSystem(); break;
case 4: realSystem(); break;
case 5: complexSystem(); break;
case 6: hyperbolicSystem(); break;
case 7: changeLanguage((*reinterpret_cast< bool(*)>(_a[1]))); break;
case 8: changePrecision(); break;
case 9: inputNumOne(); break;
case 10: inputNumTwo(); break;
case 11: inputNumThree(); break;
case 12: inputNumFour(); break;
case 13: inputNumFive(); break;
case 14: inputNumSix(); break;
case 15: inputNumSeven(); break;
case 16: inputNumEight(); break;
case 17: inputNumNine(); break;
case 18: inputNumZero(); break;
case 19: inputNumA(); break;
case 20: inputNumB(); break;
case 21: inputNumC(); break;
case 22: inputNumD(); break;
case 23: inputNumE(); break;
case 24: inputNumF(); break;
case 25: inputNumI(); break;
case 26: inputNumEi(); break;
case 27: inputPoint(); break;
case 28: inputOperAdd(); break;
case 29: inputOperSubtract(); break;
case 30: inputOperMultiply(); break;
case 31: inputOperDivide(); break;
case 32: inputOperMod(); break;
case 33: inputOperDiv(); break;
case 34: inputOperPercent(); break;
case 35: inputOperFact(); break;
case 36: inputOperComb(); break;
case 37: inputOperPower(); break;
case 38: inputOperSqr(); break;
case 39: inputOperCub(); break;
case 40: inputOperExpE(); break;
case 41: inputOperExp10(); break;
case 42: inputOperSqrt(); break;
case 43: inputOperCur(); break;
case 44: inputOperXYsqrt(); break;
case 45: inputFunSin(); break;
case 46: inputFunCos(); break;
case 47: inputFunTan(); break;
case 48: inputFunCot(); break;
case 49: inputFunArcSin(); break;
case 50: inputFunArcCos(); break;
case 51: inputFunArcTan(); break;
case 52: inputFunArcCot(); break;
case 53: inputFunLg(); break;
case 54: inputFunLn(); break;
case 55: inputFunLog(); break;
case 56: inputFunAbs(); break;
case 57: inputFunPow(); break;
case 58: inputFunGcd(); break;
case 59: inputFunLcm(); break;
case 60: inputLeftBack(); break;
case 61: inputRightBack(); break;
case 62: inputConst_e(); break;
case 63: inputConst_g(); break;
case 64: inputConst_pi(); break;
case 65: inputConstant(); break;
case 66: clearExpress(); break;
case 67: backspace(); break;
case 68: redo(); break;
case 69: undo(); break;
case 70: fold(); break;
case 71: insertNewResult(); break;
case 72: insertMemorySystem(); break;
case 73: insertMemoryResult(); break;
case 74: getResult(); break;
case 75: showHistory(); break;
case 76: showVariable(); break;
case 77: showConstant(); break;
case 78: setTopHint(); break;
case 79: windowColorChange((*reinterpret_cast< QColor(*)>(_a[1]))); break;
case 80: textviewColorChange((*reinterpret_cast< QColor(*)>(_a[1]))); break;
case 81: expressionFontChange((*reinterpret_cast< QFont(*)>(_a[1]))); break;
case 82: defaultSettings(); break;
case 83: showFontDialog(); break;
case 84: showWindowColorDialog(); break;
case 85: showTextViewColorDialog(); break;
case 86: setData(); break;
case 87: setHistoryIndex(); break;
case 88: getHugeCalcWidget(); break;
case 89: getLinearAlgebraWidget(); break;
case 90: getnonLinearAlgebraWidget(); break;
case 91: help(); break;
case 92: about(); break;
case 93: giveSuggestions(); break;
case 94: ElseTools(); break;
default: ;
}
_id -= 95;
}
return _id;
}
void MenuStateMachine(void){
uint8_t u8ExitWithoutSavingFlag = TRUE;
uint8_t u8MemCommand;
static uint32_t u32defaultSettingsInitialValue;
static uint8_t u8checkForDefaultSettings = FALSE;
uint32_t u32TickCount;
//Check to see if the encoder moved
if(i8MenuChangeFlag != 0 && i8SubMenuState == SUBMENU_NOT_SELECTED){
changeMainMenuState();
resetBlink();
}
//Check to see if the encoder switch is held down for 3 seconds. This is
//the mechanism for defaulting the menu.
if(u8MenuKeyPressFlag == TRUE){
//Start the timer.
u32TickCount = xTaskGetTickCount();
u32defaultSettingsInitialValue = u32TickCount;
u8checkForDefaultSettings = TRUE;
}else{
//If the switch continues to be held down for 3 seconds, default the settings and exit the menu.
if(u8checkForDefaultSettings == TRUE){
if(!READ_ENC_SWITCH){//Switch is held down.
//Increment the timer
u32TickCount = xTaskGetTickCount();
if((u32TickCount - u32defaultSettingsInitialValue) > DEFAULT_SETTINGS_TIME_LENGTH){
defaultSettings();
u8ExitWithoutSavingFlag = FALSE;
u8MenuExitFlag = TRUE;
u8checkForDefaultSettings = FALSE;
}
}else{
u8checkForDefaultSettings = FALSE;
}
}
}
switch(i8MainMenuState){
case X_MENU:
case Y_MENU:
case Z_MENU:
//Handle the encoder switch press
if(u8MenuKeyPressFlag == TRUE){
u8MenuKeyPressFlag = FALSE;
//If no submenu has been selected, enter submenu mode
if(i8SubMenuState == SUBMENU_NOT_SELECTED){
i8SubMenuState = RANGE;
setLEDState(u8LEDMainMenuMapping[i8MainMenuState], ON);
setLEDState(u8XYZSubMenuMapping[i8SubMenuState-1], BLINK);
}
else if(u8ParameterEditModeFlag == FALSE){
//Enter the submenu and modify the parameter
u8ParameterEditModeFlag = TRUE;
setLEDState(u8XYZSubMenuMapping[i8SubMenuState-1], ON);
initializeXYZParameterMode();
}
else{
//Lock in the selection and exit the menu.
u8ExitWithoutSavingFlag = FALSE;
u8MenuExitFlag = TRUE;
}
}
//If it made it this far, then it's changing submenus
if(i8MenuChangeFlag != 0){
//If we're not in parameter edit mode
if(u8ParameterEditModeFlag == FALSE){
changeXYZSubMenuState();
resetBlink();
}
else{
editXYZParameter(i8SubMenuState);
}
}
break;
case RECORD_MENU:
case OVERDUB_MENU:
case PLAYBACK_MENU:
//Handle the encoder switch press
if(u8MenuKeyPressFlag == TRUE){
u8MenuKeyPressFlag = FALSE;
//If no submenu has been selected, enter submenu mode
if(i8SubMenuState == SUBMENU_NOT_SELECTED){
i8SubMenuState = SOURCE;
setLEDState(u8LEDMainMenuMapping[i8MainMenuState], ON);
setLEDState(u8PlaySubMenuMapping[i8SubMenuState-1], BLINK);
}
else if(u8ParameterEditModeFlag == FALSE){
//Enter the submenu and modify the parameter
u8ParameterEditModeFlag = TRUE;
setLEDState(u8PlaySubMenuMapping[i8SubMenuState-1], ON);
initializeRecParameterMode(i8MainMenuState-RECORD_MENU);
}
else{
//Locking in the change and exiting the menu.
u8ExitWithoutSavingFlag = FALSE;
u8MenuExitFlag = TRUE;
}
}
//If it made it this far, then it's changing submenus
if(i8MenuChangeFlag != 0){
//If we're not in parameter edit mode
if(u8ParameterEditModeFlag == FALSE){
changeRecSubMenuState();
resetBlink();
}
else{
editRecParameter(i8MainMenuState-RECORD_MENU);
}
}
break;
case LOAD_MENU:
case STORE_MENU:
//Store a sequence
/*The first key press enters the mode. The next one issues a store
* command*/
if(u8MenuKeyPressFlag == TRUE){
u8MenuKeyPressFlag = FALSE;
if(i8MainMenuState == LOAD_MENU){
if(u8LoadModeFlag == FALSE){
//u8LoadModeFlag = TRUE;
/*Set the LEDs on for locations which have a stored sequence. Flash
the currently selected LED.*/
u8LoadModeFlag = initializeLoadStoreMode();
if(u8LoadModeFlag == 1){
i8SubMenuState = 1;
}
}
else{
//Load the sequence
flashLoadSequence(u8LoadStoreParameter);
u8LoadModeFlag = FALSE;
u8MenuExitFlag = TRUE;
}
}else{
if(u8StoreModeFlag == FALSE){
//u8StoreModeFlag = TRUE;
u8StoreModeFlag = initializeLoadStoreMode();
if(u8StoreModeFlag == 1){
i8SubMenuState = 1;
}
}
else{
//Store the sequence
flashStoreSequence(u8LoadStoreParameter, getLengthOfRecording());
u8StoreModeFlag = FALSE;
u8MenuExitFlag = TRUE;
}
}
}
//Handle the encoder
if(u8StoreModeFlag == TRUE || u8LoadModeFlag == TRUE){
if(i8MenuChangeFlag != 0){
editLoadStoreParameter();
}
}
else{
i8MenuChangeFlag = 0;
}
break;
case EFFECT_MENU:
if(u8MenuKeyPressFlag == TRUE){
u8MenuKeyPressFlag = FALSE;
if(u8EffectModeFlag == FALSE){
i8SubMenuState = 1;
u8EffectModeFlag = TRUE;
setLEDState(u8LEDMainMenuMapping[i8MainMenuState], ON);
initializeEffectMode();
}
else{
//Set the effect mode
u8EffectModeFlag = FALSE;
//Locking in the change and exiting the menu.
u8ExitWithoutSavingFlag = FALSE;
u8MenuExitFlag = TRUE;
}
}
//Handle the encoder
if(u8EffectModeFlag == TRUE){
if(i8MenuChangeFlag != 0){
editEffectParameter();
}
}
else{
i8MenuChangeFlag = 0;
}
break;
case CLOCK_MENU:
if(u8MenuKeyPressFlag == TRUE){
u8MenuKeyPressFlag = FALSE;
if(i8SubMenuState == SUBMENU_NOT_SELECTED){
u8ClockModeFlag = TRUE;
i8SubMenuState = SYNC;
setLEDState(u8LEDMainMenuMapping[i8MainMenuState], ON);
setLEDState(u8LEDMainMenuMapping[i8SubMenuState-1], BLINK);
}
else if(u8ParameterEditModeFlag == FALSE){
//Enter the submenu and modify the parameter
u8ParameterEditModeFlag = TRUE;
setLEDState(u8LEDMainMenuMapping[i8SubMenuState-1], ON);
initializeClockMode();
}
else{
//Set the effect mode
u8ClockModeFlag = FALSE;
//Locking in the change and exiting the menu.
u8ExitWithoutSavingFlag = FALSE;
u8MenuExitFlag = TRUE;
}
}
//If it made it this far, then it's changing submenus
if(i8MenuChangeFlag != 0){
//If we're not in parameter edit mode
if(u8ParameterEditModeFlag == FALSE){
changeClockSubMenuState();
resetBlink();
}
else{
editClockParameter();
}
}
break;
default:
break;
}
/*When we exit the menu, we have to reset the LIVE PLAY INTERACTION stuff or
we could end up in a weird state.*/
if(u8MenuExitFlag == TRUE){
/*If the main switch is pressed, then we exit without saving the change and
need to reset the parameter.*/
if(u8ExitWithoutSavingFlag == TRUE){
resetMenuParameter();
}
else{
//Write the file table with the stored settings.
copyCurrentSettingsToFileTable(0);
u8MemCommand = WRITE_FLASH_FILE_TABLE;
xQueueSend(xMemInstructionQueue, &u8MemCommand, 0);
}
resetEncoderLiveInteraction();//Encoder turning needs to be reset to not get spurious changes.
i8SubMenuState = SUBMENU_NOT_SELECTED;
u8MenuExitFlag = FALSE;
setLEDAlternateFuncFlag(FALSE);//LEDs back to indicating position
turnOffAllLEDs();//Reset the LEDs state
setRedLEDs(HALF_BRIGHTNESS);
setMenuModeFlag(FALSE);//Master control knows menu is over
u8ParameterEditModeFlag = FALSE;
u8LoadModeFlag = FALSE;
u8StoreModeFlag = FALSE;
}
}
// GlobalSettings --------------------------------------------------------------------
GlobalSettings::GlobalSettings() {
mName = "GlobalSettings";
defaultSettings();
}
void UBPreferencesController::wire()
{
UBSettings* settings = UBSettings::settings();
// main tab
mPreferencesUI->mainTabWidget->setCurrentWidget(mPreferencesUI->displayTab);
mPreferencesUI->versionLabel->setText(tr("version: ") + UBApplication::applicationVersion());
connect(mPreferencesUI->closeButton, SIGNAL(released()), this, SLOT(close()));
connect(mPreferencesUI->defaultSettingsButton, SIGNAL(released()), this, SLOT(defaultSettings()));
connect(mPreferencesUI->startupTipsCheckBox,SIGNAL(clicked(bool)),this,SLOT(onStartupTipsClicked(bool)));
// OSK preferences
for(int i = 0; i < settings->supportedKeyboardSizes->size(); i++)
mPreferencesUI->keyboardPaletteKeyButtonSize->addItem(settings->supportedKeyboardSizes->at(i));
connect(mPreferencesUI->keyboardPaletteKeyButtonSize, SIGNAL(currentIndexChanged(const QString &)), settings->boardKeyboardPaletteKeyBtnSize, SLOT(setString(const QString &)));
connect(mPreferencesUI->startModeComboBox, SIGNAL(currentIndexChanged(int)), settings->appStartMode, SLOT(setInt(int)));
connect(mPreferencesUI->useExternalBrowserCheckBox, SIGNAL(clicked(bool)), settings->webUseExternalBrowser, SLOT(setBool(bool)));
connect(mPreferencesUI->displayBrowserPageCheckBox, SIGNAL(clicked(bool)), settings->webShowPageImmediatelyOnMirroredScreen, SLOT(setBool(bool)));
connect(mPreferencesUI->swapControlAndDisplayScreensCheckBox, SIGNAL(clicked(bool)), settings->swapControlAndDisplayScreens, SLOT(setBool(bool)));
connect(mPreferencesUI->swapControlAndDisplayScreensCheckBox, SIGNAL(clicked(bool)), UBApplication::applicationController->displayManager(), SLOT(reinitScreens(bool)));
connect(mPreferencesUI->toolbarAtTopRadioButton, SIGNAL(clicked(bool)), this, SLOT(toolbarPositionChanged(bool)));
connect(mPreferencesUI->toolbarAtBottomRadioButton, SIGNAL(clicked(bool)), this, SLOT(toolbarPositionChanged(bool)));
connect(mPreferencesUI->horizontalChoice, SIGNAL(clicked(bool)), this, SLOT(toolbarOrientationHorizontal(bool)));
connect(mPreferencesUI->verticalChoice, SIGNAL(clicked(bool)), this, SLOT(toolbarOrientationVertical(bool)));
connect(mPreferencesUI->toolbarDisplayTextCheckBox, SIGNAL(clicked(bool)), settings->appToolBarDisplayText, SLOT(setBool(bool)));
// pen
QList<QColor> penLightBackgroundColors = settings->boardPenLightBackgroundColors->colors();
QList<QColor> penDarkBackgroundColors = settings->boardPenDarkBackgroundColors->colors();
QList<QColor> penLightBackgroundSelectedColors = settings->boardPenLightBackgroundSelectedColors->colors();
QList<QColor> penDarkBackgroundSelectedColors = settings->boardPenDarkBackgroundSelectedColors->colors();
mPenProperties = new UBBrushPropertiesFrame(mPreferencesUI->penFrame,
penLightBackgroundColors, penDarkBackgroundColors, penLightBackgroundSelectedColors,
penDarkBackgroundSelectedColors, this);
mPenProperties->opacityFrame->hide();
connect(mPenProperties->fineSlider, SIGNAL(valueChanged(int)), this, SLOT(widthSliderChanged(int)));
connect(mPenProperties->mediumSlider, SIGNAL(valueChanged(int)), this, SLOT(widthSliderChanged(int)));
connect(mPenProperties->strongSlider, SIGNAL(valueChanged(int)), this, SLOT(widthSliderChanged(int)));
connect(mPenProperties->pressureSensitiveCheckBox, SIGNAL(clicked(bool)), settings, SLOT(setPenPressureSensitive(bool)));
// marker
QList<QColor> markerLightBackgroundColors = settings->boardMarkerLightBackgroundColors->colors();
QList<QColor> markerDarkBackgroundColors = settings->boardMarkerDarkBackgroundColors->colors();
QList<QColor> markerLightBackgroundSelectedColors = settings->boardMarkerLightBackgroundSelectedColors->colors();
QList<QColor> markerDarkBackgroundSelectedColors = settings->boardMarkerDarkBackgroundSelectedColors->colors();
mMarkerProperties = new UBBrushPropertiesFrame(mPreferencesUI->markerFrame, markerLightBackgroundColors,
markerDarkBackgroundColors, markerLightBackgroundSelectedColors,
markerDarkBackgroundSelectedColors, this);
mMarkerProperties->pressureSensitiveCheckBox->setText(tr("Marker is pressure sensitive"));
connect(mMarkerProperties->fineSlider, SIGNAL(valueChanged(int)), this, SLOT(widthSliderChanged(int)));
connect(mMarkerProperties->mediumSlider, SIGNAL(valueChanged(int)), this, SLOT(widthSliderChanged(int)));
connect(mMarkerProperties->strongSlider, SIGNAL(valueChanged(int)), this, SLOT(widthSliderChanged(int)));
connect(mMarkerProperties->pressureSensitiveCheckBox, SIGNAL(clicked(bool)), settings, SLOT(setMarkerPressureSensitive(bool)));
connect(mMarkerProperties->opacitySlider, SIGNAL(valueChanged(int)), this, SLOT(opacitySliderChanged(int)));
//network
connect(mPreferencesUI->Username_textBox, SIGNAL(editingFinished()), this, SLOT(onCommunityUsernameChanged()));
connect(mPreferencesUI->Password_textEdit, SIGNAL(editingFinished()), this, SLOT(onCommunityPasswordChanged()));
connect(mPreferencesUI->PSCredentialsPersistenceCheckBox,SIGNAL(clicked()),this, SLOT(onCommunityPersistenceChanged()));
// about tab
connect(mPreferencesUI->checkSoftwareUpdateAtLaunchCheckBox, SIGNAL(clicked(bool)), settings->appEnableAutomaticSoftwareUpdates, SLOT(setBool(bool)));
}
void FilmGrainSettings::resetToDefault()
{
setSettings(defaultSettings());
}
void MixerSettings::resetToDefault()
{
setSettings(defaultSettings());
}
void UBPreferencesController::wire()
{
UBSettings* settings = UBSettings::settings();
// main tab
mPreferencesUI->mainTabWidget->setCurrentWidget(mPreferencesUI->displayTab);
mPreferencesUI->versionLabel->setText(tr("version: ") + UBApplication::applicationVersion());
connect(mPreferencesUI->closeButton, SIGNAL(released()), this, SLOT(close()));
connect(mPreferencesUI->defaultSettingsButton, SIGNAL(released()), this, SLOT(defaultSettings()));
// OSK preferences
mPreferencesUI->keyboardPaletteKeyButtonSize->addItem("16x16");
mPreferencesUI->keyboardPaletteKeyButtonSize->addItem("24x24");
mPreferencesUI->keyboardPaletteKeyButtonSize->addItem("32x32");
connect(mPreferencesUI->keyboardPaletteAutoMinimize, SIGNAL(clicked(bool)), settings->boardKeyboardPaletteAutoMinimize, SLOT(setBool(bool)));
connect(mPreferencesUI->keyboardPaletteKeyButtonSize, SIGNAL(currentIndexChanged(const QString &)), settings->boardKeyboardPaletteKeyBtnSize, SLOT(setString(const QString &)));
connect(mPreferencesUI->useExternalBrowserCheckBox, SIGNAL(clicked(bool)), settings->webUseExternalBrowser, SLOT(setBool(bool)));
connect(mPreferencesUI->displayBrowserPageCheckBox, SIGNAL(clicked(bool)), settings->webShowPageImmediatelyOnMirroredScreen, SLOT(setBool(bool)));
connect(mPreferencesUI->toolbarAtTopRadioButton, SIGNAL(clicked(bool)), this, SLOT(toolbarPositionChanged(bool)));
connect(mPreferencesUI->toolbarAtBottomRadioButton, SIGNAL(clicked(bool)), this, SLOT(toolbarPositionChanged(bool)));
connect(mPreferencesUI->horizontalChoice, SIGNAL(clicked(bool)), this, SLOT(toolbarOrientationHorizontal(bool)));
connect(mPreferencesUI->verticalChoice, SIGNAL(clicked(bool)), this, SLOT(toolbarOrientationVertical(bool)));
connect(mPreferencesUI->toolbarDisplayTextCheckBox, SIGNAL(clicked(bool)), settings->appToolBarDisplayText, SLOT(setBool(bool)));
// pen
QList<QColor> penLightBackgroundColors = settings->boardPenLightBackgroundColors->colors();
QList<QColor> penDarkBackgroundColors = settings->boardPenDarkBackgroundColors->colors();
QList<QColor> penLightBackgroundSelectedColors = settings->boardPenLightBackgroundSelectedColors->colors();
QList<QColor> penDarkBackgroundSelectedColors = settings->boardPenDarkBackgroundSelectedColors->colors();
mPenProperties = new UBBrushPropertiesFrame(mPreferencesUI->penFrame,
penLightBackgroundColors, penDarkBackgroundColors, penLightBackgroundSelectedColors,
penDarkBackgroundSelectedColors, this);
mPenProperties->opacityFrame->hide();
connect(mPenProperties->fineSlider, SIGNAL(valueChanged(int)), this, SLOT(widthSliderChanged(int)));
connect(mPenProperties->mediumSlider, SIGNAL(valueChanged(int)), this, SLOT(widthSliderChanged(int)));
connect(mPenProperties->strongSlider, SIGNAL(valueChanged(int)), this, SLOT(widthSliderChanged(int)));
connect(mPenProperties->pressureSensitiveCheckBox, SIGNAL(clicked(bool)), settings, SLOT(setPenPressureSensitive(bool)));
// marker
QList<QColor> markerLightBackgroundColors = settings->boardMarkerLightBackgroundColors->colors();
QList<QColor> markerDarkBackgroundColors = settings->boardMarkerDarkBackgroundColors->colors();
QList<QColor> markerLightBackgroundSelectedColors = settings->boardMarkerLightBackgroundSelectedColors->colors();
QList<QColor> markerDarkBackgroundSelectedColors = settings->boardMarkerDarkBackgroundSelectedColors->colors();
mMarkerProperties = new UBBrushPropertiesFrame(mPreferencesUI->markerFrame, markerLightBackgroundColors,
markerDarkBackgroundColors, markerLightBackgroundSelectedColors,
markerDarkBackgroundSelectedColors, this);
mMarkerProperties->pressureSensitiveCheckBox->setText(tr("Marker is pressure sensitive"));
connect(mMarkerProperties->fineSlider, SIGNAL(valueChanged(int)), this, SLOT(widthSliderChanged(int)));
connect(mMarkerProperties->mediumSlider, SIGNAL(valueChanged(int)), this, SLOT(widthSliderChanged(int)));
connect(mMarkerProperties->strongSlider, SIGNAL(valueChanged(int)), this, SLOT(widthSliderChanged(int)));
connect(mMarkerProperties->pressureSensitiveCheckBox, SIGNAL(clicked(bool)), settings, SLOT(setMarkerPressureSensitive(bool)));
connect(mMarkerProperties->opacitySlider, SIGNAL(valueChanged(int)), this, SLOT(opacitySliderChanged(int)));
// about tab
connect(mPreferencesUI->checkSoftwareUpdateAtLaunchCheckBox, SIGNAL(clicked(bool)), settings->appEnableAutomaticSoftwareUpdates, SLOT(setBool(bool)));
}
//--------------------------------------------------------------------------
// Loads all the editor settings from file. True and false settings are saved
// as 1 and 0.
// If the contents of settings.dat to not match expected then default values
// are used.
void __fastcall TOptions::LoadSettings()
{
try {
const int SIZE = 256;
AnsiString str;
str = ExtractFilePath(Application->ExeName) + "settings.dat";
char fileName[SIZE];
strcpy(fileName, str.c_str()); // fileName is path + settings.dat
defaultSettings(); // start with default settings
if(FileExists(fileName)) //check if settings file exists
{ //if it did then load all the settings
char buffer[SIZE+1];
char temp[SIZE+1]; //temp storage
unsigned int index; //looping index
ifstream File(fileName); //open settings file
// read and set flags from file
File.getline(buffer, SIZE); //first line contains version number
File.getline(buffer, SIZE); // 'generate list' setting
if (!strcmp(&buffer[1],"$generate list")) { // if expected setting
if(buffer[0] == '1') {
listFlag = true;
chkGenList->Checked = true;
} else {
listFlag = false;
chkGenList->Checked = false;
}
}
File.getline(buffer, SIZE); // 'generate s-record' setting
if (!strcmp(&buffer[1],"$generate s-record")) { // if expected setting
if(buffer[0] == '1') {
objFlag = true;
chkGenSRec->Checked = true;
} else {
objFlag = false;
chkGenSRec->Checked = false;
}
}
File.getline(buffer, SIZE); // 'save before assemble' setting
if (!strcmp(&buffer[1],"$save then assemble")) { // if expected setting
if(buffer[0] == '1') {
bSave = true;
chkSave->Checked = true;
} else {
bSave = false;
chkSave->Checked = false;
}
}
File.getline(buffer, SIZE); // 'Show Warnings' setting
if (!strcmp(&buffer[1],"$show warnings")) { // if expected setting
if(buffer[0] == '1') {
WARflag = true;
chkShowWarnings->Checked = true;
} else {
WARflag = false;
chkShowWarnings->Checked = false;
}
}
File.getline(buffer, SIZE); // 'cross reference' setting
if (!strcmp(&buffer[1],"$cross reference")) { // if expected setting
if(buffer[0] == '1') {
CREflag = true;
chkCrossRef->Checked = true;
} else {
CREflag = false;
chkCrossRef->Checked = false;
}
}
File.getline(buffer, SIZE); // 'macro expanded setting' setting
if (!strcmp(&buffer[1],"$macros expanded")) { // if expected setting
if(buffer[0] == '1') {
MEXflag = true;
chkMacEx->Checked = true;
} else {
MEXflag = false;
chkMacEx->Checked = false;
}
}
File.getline(buffer, SIZE); // 'structured assembly expanded setting' setting
if (!strcmp(&buffer[1],"$structured expand")) { // if expected setting
if(buffer[0] == '1') {
SEXflag = true;
chkStrucEx->Checked = true;
} else {
SEXflag = false;
chkStrucEx->Checked = false;
}
}
File.getline(buffer, SIZE); // 'constants expanded setting' setting
if (!strcmp(&buffer[1],"$constants expand")) { // if expected setting
if(buffer[0] == '1') {
CEXflag = true;
chkConstantsEx->Checked = true;
} else {
CEXflag = false;
chkConstantsEx->Checked = false;
}
}
index = 0;
File.getline(buffer, SIZE); // 'font name' setting
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$font name")) { // if expected setting
EditorOptionsForm->cbFont->Text = temp;
}
File.getline(buffer, SIZE); // 'font size' setting
index = 0; //reset looping index
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$font size")) { // if expected setting
EditorOptionsForm->cbSize->Text = temp;
}
File.getline(buffer, SIZE); // Tab Type setting
if (!strcmp(&buffer[1],"$tab type")) { // if expected setting
if(buffer[0] == '0') {
EditorOptionsForm->AssemblyTabs->Checked = true;
EditorOptionsForm->FixedTabs->Checked = false;
tabType = Assembly;
} else {
EditorOptionsForm->AssemblyTabs->Checked = false;
EditorOptionsForm->FixedTabs->Checked = true;
tabType = Fixed;
}
}
File.getline(buffer, SIZE); // Fixed Tab Size
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$fixed tab size")) { // if expected setting
EditorOptionsForm->FixedTabSize->Value = atoi(temp);
}
File.getline(buffer, SIZE); // maximizedEdit setting
if (!strcmp(&buffer[1],"$maximized edit")) { // if expected setting
if(buffer[0] == '1') {
maximizedEdit = true;
} else {
maximizedEdit = false;
}
}
File.getline(buffer, SIZE); // autoIndent setting
if (!strcmp(&buffer[1],"$auto indent")) { // if expected setting
if(buffer[0] == '1') {
autoIndent = true;
EditorOptionsForm->AutoIndent->Checked = true;
} else {
autoIndent = false;
EditorOptionsForm->AutoIndent->Checked = false;
}
}
File.getline(buffer, SIZE); // realTabs setting
if (!strcmp(&buffer[1],"$real tabs")) { // if expected setting
if(buffer[0] == '1') {
realTabs = true;
EditorOptionsForm->RealTabs->Checked = true;
} else {
realTabs = false;
EditorOptionsForm->RealTabs->Checked = false;
}
}
File.getline(buffer, SIZE); // Bitfield setting
if (!strcmp(&buffer[1],"$assemble bit field")) { // if expected setting
if(buffer[0] == '1') {
BITflag = true;
chkBitfield->Checked = true;
} else {
BITflag = false;
chkBitfield->Checked = false;
}
}
File.getline(buffer, SIZE); // 'Main Form Top' setting
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$main top")) { // if expected setting
Main->Top = atoi(temp);
}
File.getline(buffer, SIZE); // 'Main Form Left' setting
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$main left")) { // if expected setting
Main->Left = atoi(temp);
}
File.getline(buffer, SIZE); // 'Main Form Height' setting
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$main height")) { // if expected setting
Main->Height = atoi(temp);
}
File.getline(buffer, SIZE); // 'Main Form Width' setting
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$main width")) { // if expected setting
Main->Width = atoi(temp);
}
// Syntax Highlight stuff
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$code color")) { // if expected setting
codeStyle.color = (TColor)atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$code bold")) { // if expected setting
codeStyle.bold = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$code italic")) { // if expected setting
codeStyle.italic = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$code underline")) { // if expected setting
codeStyle.underline = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$unknown color")) { // if expected setting
unknownStyle.color = (TColor)atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$unknown bold")) { // if expected setting
unknownStyle.bold = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$unknown italic")) { // if expected setting
unknownStyle.italic = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$unknown underline")) { // if expected setting
unknownStyle.underline = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$directive color")) { // if expected setting
directiveStyle.color = (TColor)atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$directive bold")) { // if expected setting
directiveStyle.bold = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$directive italic")) { // if expected setting
directiveStyle.italic = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$directive underline")) { // if expected setting
directiveStyle.underline = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$comment color")) { // if expected setting
commentStyle.color = (TColor)atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$comment bold")) { // if expected setting
commentStyle.bold = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$comment italic")) { // if expected setting
commentStyle.italic = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$comment underline")) { // if expected setting
commentStyle.underline = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$label color")) { // if expected setting
labelStyle.color = (TColor)atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$label bold")) { // if expected setting
labelStyle.bold = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$label italic")) { // if expected setting
labelStyle.italic = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$label underline")) { // if expected setting
labelStyle.underline = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$structure color")) { // if expected setting
structureStyle.color = (TColor)atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$structure bold")) { // if expected setting
structureStyle.bold = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$structure italic")) { // if expected setting
structureStyle.italic = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$structure underline")) { // if expected setting
structureStyle.underline = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$error color")) { // if expected setting
errorStyle.color = (TColor)atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$error bold")) { // if expected setting
errorStyle.bold = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$error italic")) { // if expected setting
errorStyle.italic = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$error underline")) { // if expected setting
errorStyle.underline = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$text color")) { // if expected setting
textStyle.color = (TColor)atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$text bold")) { // if expected setting
textStyle.bold = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$text italic")) { // if expected setting
textStyle.italic = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$text underline")) { // if expected setting
textStyle.underline = atoi(temp);
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$highlight disabled")) { // if expected setting
highlightDisabled = atoi(temp);
}
File.getline(buffer, SIZE); // Print w/Black
if (!strcmp(&buffer[1],"$print w/black")) { // if expected setting
if(buffer[0] == '1')
EditorOptionsForm->PrintBlack->Checked = true;
else
EditorOptionsForm->PrintBlack->Checked = false;
}
File.getline(buffer,SIZE);
index = 0;
while(buffer[index] != '$' && index < SIZE)
{
temp[index] = buffer[index];
index++;
}
temp[index] = '\0';
if (!strcmp(&buffer[index],"$background color")) { // if expected setting
backColor = (TColor)atoi(temp);
}
File.close();
} // endif
}
catch( ... ) {
MessageDlg("Error loading editor settings",mtInformation, TMsgDlgButtons() << mbOK,0);
return;
}
}
// constructor de baza
Object3D::Object3D()
{
defaultSettings();
}
// seteaza si tipul obiectului
Object3D::Object3D(ObjectType _Type)
{
defaultSettings();
Type = _Type;
}
// seteaza si pozitia
Object3D::Object3D(Vector3D *_translation)
{
defaultSettings();
this->SetPosition(_translation);
}
void readInputData(Simulation *sim, Grid *g, Settings *sett){
FILE *inParticles, *inCells;
int i, j;
defaultSettings(sett);
set(g, sett->gridCellsX, sett->gridCellsY, sett->simulationWidth, sett->simulationHeight);
sim->particles = malloc(sett->numOfParticles * sizeof(struct particle));
g->cells = malloc(g->numCellsXTotal * sizeof(struct cell*));
for(i = 0; i < g->numCellsXTotal; i++){
g->cells[i] = malloc(g->numCellsYTotal * sizeof(struct cell));
}
inParticles = fopen("particles.txt", "r");
for(i = 0; i < sett->numOfParticles; i++){
fscanf(inParticles, "%lg", &sim->particles[i].x);
//printf("%lg\n", sim->particles[i].x);
fscanf(inParticles, "%lg", &sim->particles[i].y);
//printf("%lg\n", sim->particles[i].y);
fscanf(inParticles, "%lg", &sim->particles[i].radius);
//printf("%lg\n", sim->particles[i].radius);
fscanf(inParticles, "%lg", &sim->particles[i].vx);
//printf("%lg\n", sim->particles[i].vx);
fscanf(inParticles, "%lg", &sim->particles[i].vy);
//printf("%lg\n", sim->particles[i].vy);
fscanf(inParticles, "%lg", &sim->particles[i].ax);
//printf("%lg\n", sim->particles[i].ax);
fscanf(inParticles, "%lg", &sim->particles[i].ay);
//printf("%lg\n", sim->particles[i].ay);
fscanf(inParticles, "%lg", &sim->particles[i].mass);
//printf("%lg\n", sim->particles[i].mass);
fscanf(inParticles, "%lg", &sim->particles[i].charge);
//printf("%lg\n", sim->particles[i].charge);
fscanf(inParticles, "%lg", &sim->particles[i].prevX);
//printf("%lg\n", sim->particles[i].prevX);
fscanf(inParticles, "%lg", &sim->particles[i].prevY);
//printf("%lg\n", sim->particles[i].prevY);
fscanf(inParticles, "%lg", &sim->particles[i].Ex);
//printf("%lg\n", sim->particles[i].Ex);
fscanf(inParticles, "%lg", &sim->particles[i].Ey);
//printf("%lg\n", sim->particles[i].Ey);
fscanf(inParticles, "%lg", &sim->particles[i].Bz);
//printf("%lg\n", sim->particles[i].Bz);
fscanf(inParticles, "%lg", &sim->particles[i].prevpositionComponentForceX);
//printf("%lg\n", sim->particles[i].prevpositionComponentForceX);
fscanf(inParticles, "%lg", &sim->particles[i].prevpositionComponentForceY);
//printf("%lg\n", sim->particles[i].prevpositionComponentForceY);
fscanf(inParticles, "%lg", &sim->particles[i].prevtangentVelocityComponentOfForceX);
//printf("%lg\n", sim->particles[i].prevtangentVelocityComponentOfForceX);
fscanf(inParticles, "%lg", &sim->particles[i].prevtangentVelocityComponentOfForceY);
//printf("%lg\n", sim->particles[i].prevtangentVelocityComponentOfForceY);
fscanf(inParticles, "%lg", &sim->particles[i].prevnormalVelocityComponentOfForceX);
//printf("%lg\n", sim->particles[i].prevnormalVelocityComponentOfForceX);
fscanf(inParticles, "%lg", &sim->particles[i].prevnormalVelocityComponentOfForceY);
//printf("%lg\n", sim->particles[i].prevnormalVelocityComponentOfForceY);
fscanf(inParticles, "%lg", &sim->particles[i].prevBz);
//printf("%lg\n", sim->particles[i].prevBz);
fscanf(inParticles, "%lg", &sim->particles[i].prevLinearDragCoefficient);
//printf("%lg\n", sim->particles[i].prevLinearDragCoefficient);
}
fclose(inParticles);
inCells = fopen("cells.txt", "r");
for(i = 0; i < g->numCellsXTotal; i++){
for(j = 0; j < g->numCellsYTotal; j++){
fscanf(inCells, "%lg", &g->cells[i][j].jx);
// printf("%lg\n", g->cells[i][j].jx);
fscanf(inCells, "%lg", &g->cells[i][j].jy);
// printf("%lg\n", g->cells[i][j].jy);
fscanf(inCells, "%lg", &g->cells[i][j].rho);
// printf("%lg\n", g->cells[i][j].rho);
fscanf(inCells, "%lg", &g->cells[i][j].phi);
// printf("%lg\n", g->cells[i][j].phi);
fscanf(inCells, "%lg", &g->cells[i][j].ex);
// printf("%lg\n", g->cells[i][j].ex);
fscanf(inCells, "%lg", &g->cells[i][j].ey);
// printf("%lg\n", g->cells[i][j].ey);
fscanf(inCells, "%lg", &g->cells[i][j].bz);
// printf("%lg\n", g->cells[i][j].bz);
fscanf(inCells, "%lg", &g->cells[i][j].bzo);
// printf("%lg\n", g->cells[i][j].bzo);
}
}
fclose(inCells);
}
Q_DECL_EXPORT int main(int argc, char *argv[])
{
QSettings *settings = new QSettings(QDir::homePath()+"/.config/thumbterm/settings.ini", QSettings::IniFormat);
defaultSettings(settings);
QCoreApplication::setApplicationName("Thumbterm");
// fork the child process before creating QGuiApplication
int socketM;
int pid = forkpty(&socketM,NULL,NULL,NULL);
if( pid==-1 ) {
qFatal("forkpty failed");
exit(1);
} else if( pid==0 ) {
setenv("TERM", settings->value("terminal/envVarTERM").toByteArray(), 1);
QString execCmd;
for(int i=0; i<argc-1; i++) {
if( QString(argv[i]) == "-e" )
execCmd = QString(argv[i+1]);
}
if(execCmd.isEmpty()) {
execCmd = settings->value("gen/execCmd").toString();
}
if(execCmd.isEmpty()) {
// Unset POSIXLY_CORRECT as having it set causes bash to start in POSIX mode (http://www.delorie.com/gnu/docs/bash/bashref_62.html#IDX214)
// which causes it to not read the .bashrc on startup (http://lists.gnu.org/archive/html/bug-bash/2001-10/msg00117.html)
unsetenv("POSIXLY_CORRECT");
// execute the user's default shell
passwd *pwdstruct = getpwuid(getuid());
execCmd = QString(pwdstruct->pw_shell);
execCmd.append(" --login");
}
if(settings)
delete settings; // don't need 'em here
QStringList execParts = execCmd.split(' ', QString::SkipEmptyParts);
if(execParts.length()==0)
exit(0);
char *ptrs[execParts.length()+1];
for(int i=0; i<execParts.length(); i++) {
ptrs[i] = new char[execParts.at(i).toLatin1().length()+1];
memcpy(ptrs[i], execParts.at(i).toLatin1().data(), execParts.at(i).toLatin1().length());
ptrs[i][execParts.at(i).toLatin1().length()] = 0;
}
ptrs[execParts.length()] = 0;
execvp(execParts.first().toLatin1(), ptrs);
exit(0);
}
QGuiApplication app(argc, argv);
QQuickWindow::setDefaultAlphaBuffer(true);
QScreen* sc = app.primaryScreen();
if(sc){
sc->setOrientationUpdateMask(Qt::PrimaryOrientation
| Qt::LandscapeOrientation
| Qt::PortraitOrientation
| Qt::InvertedLandscapeOrientation
| Qt::InvertedPortraitOrientation);
}
qmlRegisterType<TextRender>("TextRender",1,0,"TextRender");
MainWindow view;
Terminal term;
Util util(settings);
term.setUtil(&util);
QString startupErrorMsg;
// copy the default config files to the config dir if they don't already exist
copyFileFromResources(":/data/menu.xml", util.configPath()+"/menu.xml");
copyFileFromResources(":/data/english.layout", util.configPath()+"/english.layout");
copyFileFromResources(":/data/finnish.layout", util.configPath()+"/finnish.layout");
copyFileFromResources(":/data/french.layout", util.configPath()+"/french.layout");
copyFileFromResources(":/data/german.layout", util.configPath()+"/german.layout");
copyFileFromResources(":/data/qwertz.layout", util.configPath()+"/qwertz.layout");
KeyLoader keyLoader;
keyLoader.setUtil(&util);
bool ret = keyLoader.loadLayout( settings->value("ui/keyboardLayout").toString() );
if(!ret) {
// on failure, try to load the default one (english) directly from resources
startupErrorMsg = "There was an error loading the keyboard layout.<br>\nUsing the default one instead.";
settings->setValue("ui/keyboardLayout", "english");
ret = keyLoader.loadLayout(":/data/english.layout");
if(!ret)
qFatal("failure loading keyboard layout");
}
QQmlContext *context = view.rootContext();
context->setContextProperty( "term", &term );
context->setContextProperty( "util", &util );
context->setContextProperty( "keyLoader", &keyLoader );
view.setSource(QUrl("qrc:/qml/Main.qml"));
QObject *root = view.rootObject();
if(!root)
qFatal("no root object - qml error");
QObject* win = root->findChild<QObject*>("window");
if(!startupErrorMsg.isEmpty())
QMetaObject::invokeMethod(win, "showErrorMessage", Qt::QueuedConnection, Q_ARG(QVariant, startupErrorMsg));
TextRender *tr = root->findChild<TextRender*>("textrender");
tr->setUtil(&util);
tr->setTerminal(&term);
term.setRenderer(tr);
term.setWindow(&view);
util.setWindow(&view);
util.setTerm(&term);
util.setRenderer(tr);
QObject::connect(&term,SIGNAL(displayBufferChanged()),win,SLOT(displayBufferChanged()));
QObject::connect(view.engine(),SIGNAL(quit()),&app,SLOT(quit()));
QSize screenSize = QGuiApplication::primaryScreen()->size();
if ((screenSize.width() < 1024 || screenSize.height() < 768 || app.arguments().contains("-fs"))
&& !app.arguments().contains("-nofs"))
{
view.showFullScreen();
} else
view.show();
PtyIFace ptyiface(pid, socketM, &term,
settings->value("terminal/charset").toString());
if( ptyiface.failed() )
qFatal("pty failure");
return app.exec();
}
