Exemple #1
0
static void sys_cfg_set_dns()
{
    CLEAR_SCREEN;
    input_dst* dns_input;
    dns_input = input_init(FREE_MOD);

    input_props_set(dns_input, input_one_property);
    input_property_set(dns_input, INPUT_HIND, "DNS IP");
    input_dis(MAIN_DISP, dns_input);

    printf_str(MAIN_DISP, DISP_X_COOR, DISP_Y_COOR, "输入DNS地址", 1);

    lcd_160_upd();

    input_key_manege(MAIN_DISP, dns_input , lcd_160_upd);

    char dns[32] = {0};

    input_str_get(dns_input, dns);

    input_destory(dns_input);

    if (check_ip_valid(dns))
    {
        disp_msg("地址格式错误", 10);
        return;
    }
    char cmd[128];
    sprintf(cmd, "echo \"nameserver %s\" > /etc/resolv.conf", dns);
    system(cmd);
    disp_msg("修改DNS成功", 5);

}
Exemple #2
0
static void sys_cfg_set_agent()
{
    CLEAR_SCREEN;
    const uint32 input_length = 190;
    input_dst* agent_input, *agent_port_input;
    agent_input = input_init(FREE_MOD);
    agent_port_input = input_init(FREE_MOD);

    input_props_set(agent_input, input_one_property);
    input_property_set(agent_input, INPUT_HIND, "前置IP");
    input_property_set(agent_input, INPUT_MAX_LEN, 15);
    input_property_set(agent_input, INPUT_RET_STA, 176, INPUT_Y_COOR);
    input_property_set(agent_input, INPUT_RET_SIZ, INPUT_HEIGHT, input_length);

    input_props_set(agent_port_input, input_two_property);
    input_property_set(agent_port_input, INPUT_HIND, "前置端口");
    input_property_set(agent_port_input, INPUT_MAX_LEN, 5);
    input_dis(MAIN_DISP, agent_input);
    input_dis(MAIN_DISP, agent_port_input);

    printf_str(MAIN_DISP, DISP_X_COOR, DISP_Y_COOR, "输入前置地址", 1);

    lcd_160_upd();

    input_key_manege(MAIN_DISP, agent_input , lcd_160_upd);
    input_key_manege(MAIN_DISP, agent_port_input , lcd_160_upd);

    char agent_ip[24] = {0};

    input_str_get(agent_input, agent_ip);
    uint32 agent_port = input_val_get(agent_port_input) / 100;

    input_destory(agent_input);
    input_destory(agent_port_input);

    if (check_ip_valid(agent_ip)
            || agent_port < 80 || agent_port > 65535)
    {
        LOG((LOG_DEBUG, "前置机IP: %s:%d", agent_ip, agent_port));
        disp_msg("地址格式错误", 10);
        return;
    }

    if (update_config("svc.remotename", agent_ip)
            || update_config_int("svc.remoteport", agent_port))
    {
        disp_msg("更新前置信息失败", 10);
        return;
    }
    SAFE_STR_CPY(p16pos.remote[REMOTE_WIRE].u.host.host_name, agent_ip);
    p16pos.remote[REMOTE_WIRE].u.host.host_port = agent_port;
    setup_svc_url();

    disp_msg("修改前置信息成功", 5);
}
Exemple #3
0
static void sys_cfg_set_time()
{
    CLEAR_SCREEN;
    input_dst* date_input, *time_input;
    date_input = input_init(FREE_MOD);
    time_input = input_init(FREE_MOD);

    input_props_set(date_input, input_one_property);
    input_property_set(date_input, INPUT_HIND, "日期");
    input_property_set(date_input, INPUT_MAX_LEN, 8);
    input_props_set(time_input, input_two_property);
    input_property_set(time_input, INPUT_HIND, "时间");
    input_property_set(time_input, INPUT_MAX_LEN, 6);
    input_dis(MAIN_DISP, date_input);
    input_dis(MAIN_DISP, time_input);

    printf_str(MAIN_DISP, DISP_X_COOR, DISP_Y_COOR, "格式YYYYMMDD HHMMSS", 1);

    lcd_160_upd();

    input_key_manege(MAIN_DISP, date_input , lcd_160_upd);
    input_key_manege(MAIN_DISP, time_input , lcd_160_upd);

    char date_buf[24] = {0};
    char time_buf[24] = {0};

    input_str_get(date_input, date_buf);
    input_str_get(time_input, time_buf);

    input_destory(date_input);
    input_destory(time_input);

    char input_buf[24] = {0};
    char output_buf[32] = {0};

    strcpy(input_buf, date_buf);
    strcat(input_buf, time_buf);

    if (strlen(input_buf) != 14
            || convert_datetime(input_buf, "%Y%m%d%H%M%S", "%Y-%m-%d%H:%M:%S",
                                output_buf, sizeof(output_buf) - 1) != 0)
    {
        disp_msg("时间格式错误", 8);
    }
    else
    {
        char cmd[128];
        strcpy(cmd, "date -D %Y-%m-%d%H:%M:%S -s ");
        strcat(cmd, output_buf);
        system(cmd);
        system("hwclock -w");
        disp_msg("修改时间成功", 5);
    }
}
Exemple #4
0
static void sys_cfg_set_admin()
{
    CLEAR_SCREEN;
    input_dst* pswd1, *pswd2;
    pswd1 = input_init(PASSWORD_MOD);
    pswd2 = input_init(PASSWORD_MOD);

    input_props_set(pswd1, input_one_property);
    input_property_set(pswd1, INPUT_HIND, "密码");
    input_property_set(pswd1, INPUT_MAX_LEN, 8);
    input_props_set(pswd2, input_two_property);
    input_property_set(pswd2, INPUT_HIND, "确认");
    input_property_set(pswd2, INPUT_MAX_LEN, 8);

    input_dis(MAIN_DISP, pswd1);
    input_dis(MAIN_DISP, pswd2);

    lcd_160_upd();

    int ret;
    ret = input_key_manege(MAIN_DISP, pswd1 , lcd_160_upd);
    if (ret < 0)
        goto L_END;

    ret = input_key_manege(MAIN_DISP, pswd2 , lcd_160_upd);
    if (ret < 0)
        goto L_END;

    char pswd1_str[9] = {0};
    char pswd2_str[9] = {0};
    input_str_get(pswd1, pswd1_str);
    input_str_get(pswd2, pswd2_str);


    if (strcmp(pswd1_str, pswd2_str) != 0)
    {
        disp_msg("输入密码不符", 10);
    }
    else if (strlen(pswd1_str) < 6 || strlen(pswd1_str) > 8)
    {
        disp_msg("密码长度不符", 10);
    }
    else if (update_config("sys.password", pswd1_str))
    {
        disp_msg("修改参数失败", 10);
    }
    else
    {
        disp_msg("修改密码成功", 5);
    }
L_END:
    input_destory(pswd1);
    input_destory(pswd2);
}
Exemple #5
0
static void oper_login()
{
    if (p16pos.login_flag == 1)
    {
        disp_msg("已签到,请先签出", 10);
        return;
    }
    if (!check_oper_login())
    {
        disp_msg("签到成功", 5);
    }
}
Exemple #6
0
static void oper_printer_by_devseqno()
{
    CLEAR_SCREEN;
    input_dst* devseqno_input;
    devseqno_input = input_init(FREE_MOD);

    input_props_set(devseqno_input, input_one_property);
    input_property_set(devseqno_input, INPUT_HIND, "流水号");
    input_property_set(devseqno_input, INPUT_MAX_LEN, 10);
    input_dis(MAIN_DISP, devseqno_input);

    printf_str(MAIN_DISP, DISP_X_COOR, DISP_Y_COOR, "输入终端流水号", 1);

    lcd_160_upd();

    input_key_manege(MAIN_DISP, devseqno_input , lcd_160_upd);

    char seqno_buf[24] = {0};

    input_str_get(devseqno_input, seqno_buf);

    input_destory(devseqno_input);

    int devseqno = atoi(seqno_buf);

    int ret;
    p16_transdtl_t transdtl;
    memset(&transdtl, 0, sizeof transdtl);
    ret = trans_get_oper_devseqno(&transdtl, p16pos.operid, devseqno);
    if (ret == 0)
    {
        disp_msg("无流水", 10);
        return;
    }
    else if (ret < 0)
    {
        disp_msg("查询流水失败,请联系管理员", 10);
    }
    else
    {
        if (transdtl.transflag == TRANS_SYS_FAILED || transdtl.transflag == TRANS_INIT)
        {
            disp_msg("无效流水不能打印", 3);
            return;
        }
        ret = pos_printer(&transdtl, 1, 1);
        if (ret == 0)
        {
            disp_msg("打印成功", 5);
        }
    }
}
Exemple #7
0
static void sys_cfg_clear_transdtl()
{
    int ret = confirm_dialog("确认清空流水?");
    if (ret != 0)
        return;
    ret = trans_clear_dtl();
    if (!ret)
    {
        disp_msg("清空流水成功", 10);
    }
    else
    {
        disp_msg("清空流水失败\n 请联系管理员", 10);
    }
}
Exemple #8
0
static void sys_cfg_reset()
{
    if (check_admin_pswd())
    {
        return;
    }

    disp_msg("准备恢复出厂设置", 0);
    if (syspara_reset())
    {
        disp_msg("恢复出厂设置成功", 3);
    }
    else
    {
        disp_msg("恢复出厂设置失败", 3);
    }
}
Exemple #9
0
static void sys_cfg_heartbeat()
{
    CLEAR_SCREEN;
    input_dst* heartbeat_input;
    heartbeat_input = input_init(FREE_MOD);

    input_props_set(heartbeat_input, input_one_property);
    input_property_set(heartbeat_input, INPUT_HIND, "心跳参数");
    input_property_set(heartbeat_input, INPUT_MAX_LEN, 1);
    input_dis(MAIN_DISP, heartbeat_input);

    printf_str(MAIN_DISP, DISP_X_COOR, DISP_Y_COOR, "单位分,0~10", 1);

    lcd_160_upd();

    int ret = input_key_manege(MAIN_DISP, heartbeat_input , lcd_160_upd);
    if (ret < 0)
    {
        input_destory(heartbeat_input);
        return;
    }

    char input_buf[24] = {0};

    input_str_get(heartbeat_input, input_buf);

    input_destory(heartbeat_input);

    int heartbeat = atoi(input_buf);
    if (heartbeat < 0 || heartbeat > 10)
    {
        disp_msg("输入参数值不正确", 10);
        return;
    }

    if (update_config_int("sys.heartbeatminutes", heartbeat))
    {
        disp_msg("更新工作模式失败", 10);
        return;
    }
    p16pos.heartbeat_minutes = heartbeat;

    disp_msg("修改成功,请手动重启", 5);

}
Exemple #10
0
static void sys_cf_set_printerpages()
{
    CLEAR_SCREEN;
    input_dst* pages_input;
    pages_input = input_init(FREE_MOD);

    input_props_set(pages_input, input_one_property);
    input_property_set(pages_input, INPUT_HIND, "小票联数");
    input_property_set(pages_input, INPUT_MAX_LEN, 1);
    input_dis(MAIN_DISP, pages_input);

    printf_str(MAIN_DISP, DISP_X_COOR, DISP_Y_COOR, "输入0-3一位数字", 1);

    lcd_160_upd();

    int ret = input_key_manege(MAIN_DISP, pages_input , lcd_160_upd);
    if (ret < 0)
    {
        input_destory(pages_input);
        return;
    }

    char pages_buf[24] = {0};

    input_str_get(pages_input, pages_buf);


    input_destory(pages_input);

    int pages = atoi(pages_buf);
    if (pages < 0 || pages > 3)
    {
        disp_msg("小票联数范围0~3", 10);
        return;
    }

    if (update_config_int("sys.printerpages", pages))
    {
        disp_msg("更新小票联数失败", 10);
        return;
    }
    p16pos.printer_pages = (uint8)pages;

    disp_msg("修改小票联数成功", 5);
}
Exemple #11
0
static void sys_cfg_workmode()
{
    CLEAR_SCREEN;
    input_dst* workmode_input;
    workmode_input = input_init(FREE_MOD);

    input_props_set(workmode_input, input_one_property);
    input_property_set(workmode_input, INPUT_HIND, "工作模式");
    input_property_set(workmode_input, INPUT_MAX_LEN, 1);
    input_dis(MAIN_DISP, workmode_input);

    printf_str(MAIN_DISP, DISP_X_COOR, DISP_Y_COOR, "0-充值 1-补助", 1);

    lcd_160_upd();

    int ret = input_key_manege(MAIN_DISP, workmode_input , lcd_160_upd);
    if (ret < 0)
    {
        input_destory(workmode_input);
        return;
    }

    char input_buf[24] = {0};

    input_str_get(workmode_input, input_buf);

    input_destory(workmode_input);

    int mode = atoi(input_buf);
    if (mode != 0 && mode != 1)
    {
        disp_msg("输入参数值不正确", 10);
        return;
    }

    if (update_config_int("sys.workmode", mode))
    {
        disp_msg("更新工作模式失败", 10);
        return;
    }
    p16pos.work_mode = mode;

    disp_msg("修改成功,请手动重启", 5);
}
Exemple #12
0
static void oper_logout()
{
    if (p16pos.login_flag == 1)
    {
        int ret;
        ret = confirm_dialog("确定签出操作员?");
        if (ret < 0)
            return;
        p16pos.login_flag = 0;
        p16pos.operid = 0;
        p16pos.authcode = 0;
        p16pos.batchno = 0;
        disp_msg("操作员签出成功", 6);
    }
    else
    {
        disp_msg("不需要签出", 5);
    }
}
Exemple #13
0
//{{{ int main(int argc,char** argv)
int main(int argc,char** argv)
{
	//get_config();
	format_msg(0);//初次运行时获取天气
	get_batt();// 初次运行时获取电量
	get_cpu();//cpu
	get_mem();//mem
	get_net();//net
	get_temp();//temperature
	get_mailchk();//2014-4-2添加,邮件检查的显示。
	disp_msg();
	exit(0);
}//}}}
Exemple #14
0
static int8 check_admin_pswd()
{
    CLEAR_SCREEN;
    int ret;
    char admin_pswd[64] = {0};
    ret = SAFE_GET_CONFIG("sys.password", admin_pswd);
    if (ret)
    {
        disp_msg("不能获取管理密码", 5);
        return -1;
    }

    input_dst* pswd_input;
    pswd_input = input_init(PASSWORD_MOD);
    input_props_set(pswd_input, input_one_property);
    input_property_set(pswd_input, INPUT_HIND, "密码");
    input_property_set(pswd_input, INPUT_MAX_LEN, 8);
    input_dis(MAIN_DISP, pswd_input);
    printf_str(MAIN_DISP, DISP_X_COOR, DISP_Y_COOR, "请输入管理员密码", 1);

    lcd_160_upd();

    ret = input_key_manege(MAIN_DISP, pswd_input , lcd_160_upd);
    if (ret >= 0)
    {
        char pswd[9] = {0};
        input_str_get(pswd_input, pswd);
        if (strcmp(pswd, admin_pswd) == 0)
            ret = 0;
        else
        {
            disp_msg("密码错误", 10);
            ret = -1;
        }
    }
    input_destory(pswd_input);
    return ret;

}
Exemple #15
0
static void sys_cfg_set_devphyid()
{
    CLEAR_SCREEN;
    input_dst* devphyid_input;
    devphyid_input = input_init(FREE_MOD);

    input_props_set(devphyid_input, input_one_property);
    input_property_set(devphyid_input, INPUT_HIND, "终端编号");
    input_property_set(devphyid_input, INPUT_MAX_LEN, 8);
    input_dis(MAIN_DISP, devphyid_input);

    printf_str(MAIN_DISP, DISP_X_COOR, DISP_Y_COOR, "输入8位终端编号", 1);

    lcd_160_upd();

    input_key_manege(MAIN_DISP, devphyid_input , lcd_160_upd);

    char devphyid_buf[24] = {0};

    input_str_get(devphyid_input, devphyid_buf);

    input_destory(devphyid_input);

    if (strlen(devphyid_buf) != 8)
    {
        disp_msg("终端号格式错误", 10);
        return;
    }

    if (update_config("dev.devphyid", devphyid_buf))
    {
        disp_msg("更新终端号失败", 10);
        return;
    }
    strcpy(p16pos.devphyid, devphyid_buf);
    LOG((LOG_DEBUG, "终端号%s", p16pos.devphyid));

    disp_msg("修改终端号成功", 5);
}
Exemple #16
0
static void oper_printer_last()
{
    int ret;
    p16_transdtl_t transdtl;
    memset(&transdtl, 0, sizeof transdtl);
    ret = trans_get_last_succ(&transdtl, p16pos.operid);
    if (ret == 0)
    {
        disp_msg("无流水", 10);
        return;
    }
    else if (ret < 0)
    {
        disp_msg("查询流水失败,请联系管理员", 10);
    }
    else
    {
        ret = pos_printer(&transdtl, 1, 1);
        if (ret == 0)
        {
            disp_msg("打印成功", 5);
        }
    }
}
Exemple #17
0
static void oper_pos_printer()
{
    if (p16pos.login_flag != 1)
    {
        disp_msg("请操作员先登录", 10);
        return;
    }
    menu_item_t menu[] =
    {
        {"1.最后一笔", &oper_printer_last},
        {"2.按流水号", &oper_printer_by_devseqno},
        {NULL, NULL},
    };
    easy_menu_loop(menu, "小票打印");
}
static int check_send_transdtl()
{
	const int TRANSDTL_SLEEP_TM = 10;
	const int HEART_SLEEP_TM = 30;
	char recv_buf[1024] = {0};
	int recv_len = 0;
	int ret =0;
	LOG((LOG_DEBUG,"进入check_send_transdtl"));
	while (p16pos.app_running)
	{
		memset(recv_buf,0,1024);
		recv_len = 0;
		ret = send_rt_transdtl_data(recv_buf,&recv_len);
		if(ret == 0)//发送实时流水成功的情况
		{
			if(recv_len>0)
			{
				p16_recv_rt_transdtl_package recv_package;
				memset(&recv_package,0,sizeof(recv_package));
				parse_recv_data(recv_buf,3,&recv_package);
				if(recv_package.data.ret_code == 0)
				{
					LOG((LOG_DEBUG,"上传实时流水成功"));
				}
				else
				{
					LOG((LOG_DEBUG,"上传实时流水失败,pos机不再上传流水"));
				}
			}
			LOG((LOG_DEBUG,"=========================sleep %d========================",TRANSDTL_SLEEP_TM));
			sleep(TRANSDTL_SLEEP_TM);
		}
		else//没有交易流水需要发送
		{
			//发送心跳
			send_heart_data(recv_buf,&recv_len);
			if(recv_len>0)
			{
				//分析接收的数据
				p16_recv_heart_package recv_heart;
				parse_recv_data(recv_buf,0,&recv_heart);

				LOG((LOG_DEBUG,"心跳收到的系统版本号:"));
				p16dump_hex(LOG_DEBUG,recv_heart.data.cfgverno,4);
				LOG((LOG_DEBUG,"心跳收到的服务器时间:"));
				p16dump_hex(LOG_DEBUG,recv_heart.data.server_datetime,6);
				LOG((LOG_DEBUG,"心跳收到的服务器黑名单版本号:"));
				p16dump_hex(LOG_DEBUG,recv_heart.data.current_blacklist_version,6);
				LOG((LOG_DEBUG,"当前系统的黑名单版本号:"));
				p16dump_hex(LOG_DEBUG,p16pos.pos_blacklist_version, 6);
				if(memcmp(recv_heart.data.current_blacklist_version,p16pos.pos_blacklist_version, 6)>0)
				{
					LOG((LOG_DEBUG,"心跳收到的黑名单版本号大于当前系统的黑名单版本号,执行下载黑名单函数!!"));
					//下载黑名单
					memset(recv_buf,0,1024);
					recv_len = 0;
					send_download_blacklist_data(recv_buf,&recv_len);
					if(recv_len>0)
					{
						p16_recv_blacklist_package recv_package;
						parse_recv_data(recv_buf, 2, &recv_package);
						if(recv_package.data.list_cnt>0)
						{
							//有黑名单
							LOG((LOG_DEBUG,"有黑名单%d条",recv_package.data.list_cnt));
							ret = save_blackcard_record(recv_package.data.list_cnt, recv_package.data.blacklist_list);
							if(ret)
							{
								//致命错误,联系管理员
								disp_msg("操作数据库失败,请联系管理员",10);
								return -1;
							}
							//更新系统黑名单版本号
							char pos_blacklist_version[13] = {0};
							encode_hex(recv_package.data.sys_list_version, 6, pos_blacklist_version);
							//更新系统版本号
							ret = update_config("dev.pos_blacklist_version",pos_blacklist_version);
							if(ret)
							{
								//致命错误
								return -2;
							}
							memcpy(p16pos.pos_blacklist_version, recv_package.data.sys_list_version, 6);
							LOG((LOG_DEBUG,"更新版本号为:%s",pos_blacklist_version));
							LOG((LOG_DEBUG,"======================================================="));
						}
					}

				}
			}
			LOG((LOG_DEBUG,"=========================sleep %d========================",HEART_SLEEP_TM));
			sleep(HEART_SLEEP_TM);
		}
		
	}
    return 0;
}
Exemple #19
0
static void do_statistic_oper_by_day(const char* today)
{
    if (p16pos.login_flag != 1)
    {
        disp_msg("请操作员先登录", 10);
        return;
    }

    oper_trans_t trans;
    memset(&trans, 0, sizeof trans);
    int ret = oper_get_trans(today, p16pos.operid, &trans);
    if (ret)
    {
        disp_msg("查询失败\n请联系管理员", 10);
        return;
    }
    char tip[64];
    CLEAR_SCREEN;

    uint8 y_coor = DISP_Y_COOR;
    sprintf(tip, "操作员 %s", p16pos.opername);
    printf_str(MAIN_DISP, DISP_X_COOR, y_coor, tip, 1);
    y_coor += 26;
    sprintf(tip, "统计日期 %s", today);
    printf_str(MAIN_DISP, DISP_X_COOR, y_coor, tip, 1);
    y_coor += 26;
    line(MAIN_DISP, DISP_X_COOR, y_coor, DISP_X_COOR + 200, y_coor, 1);
    line(MAIN_DISP, DISP_X_COOR, y_coor + 1, DISP_X_COOR + 200, y_coor + 1, 1);
    y_coor += 6;

    int index = 0;
    uint8 key;
    dis_mod_set(MAIN_DISP, DEFAULT_HZ_FONT, DEFAULT_ASC_FONT);
    while (1)
    {
        // box(MAIN_DISP, 0, y_coor, 160, 160, 0);
        CLEAR(MAIN_DISP, DISP_X_COOR, y_coor, DISP_X_COOR + DISP_X_PIXEL, DISP_Y_PIXEL);
        if (index == 0)
        {
            sprintf(tip, "成功 %d笔", trans.success_cnt);
            printf_str(MAIN_DISP, DISP_X_COOR, y_coor, tip, 1);
            sprintf(tip, " %0.2f元", trans.success_amt / 100.0);
            printf_str(MAIN_DISP, DISP_X_COOR, y_coor + INPUT_HEIGHT, tip, 1);
        }
        else if (index == 1)
        {
            sprintf(tip, "失败 %d笔", trans.total_cnt - trans.success_cnt);
            printf_str(MAIN_DISP, DISP_X_COOR, y_coor, tip, 1);
            sprintf(tip, " %0.2f元", (trans.total_amt - trans.success_amt) / 100.0);
            printf_str(MAIN_DISP, DISP_X_COOR, y_coor + INPUT_HEIGHT, tip, 1);
        }
        else
        {
            sprintf(tip, "总数 %d笔", trans.total_cnt);
            printf_str(MAIN_DISP, DISP_X_COOR, y_coor, tip, 1);
            sprintf(tip, " %0.2f元", (trans.total_amt) / 100.0);
            printf_str(MAIN_DISP, DISP_X_COOR, y_coor + INPUT_HEIGHT, tip, 1);
        }
        lcd_160_upd();
        ret = get_key(&key, BLOCK_MOD, -1);
        if (ret < 0)
            continue;
        if (ESC_KEY == key)
        {
            return;
        }
        else if (KEY_UP == key)
        {
            --index;
            if (index < 0) index = 0;
        }
        else if (KEY_DN == key)
        {
            ++index;
            if (index > 2) index = 2;
        }
    }

}
Exemple #20
0
static void sys_cfg_rom_update()
{
    CLEAR_SCREEN;
    disp_msg("未实现功能", 5);
}
Exemple #21
0
static void sys_cfg_set_local_network()
{
    CLEAR_SCREEN;
    const uint32 input_length = 190;
    input_dst* ip_input, *net_input, *gw_input;
    ip_input = input_init(FREE_MOD);
    net_input = input_init(FREE_MOD);
    gw_input = input_init(FREE_MOD);

    printf_str(MAIN_DISP, DISP_X_COOR, DISP_Y_COOR, "输入IP信息", 1);
    input_props_set(ip_input, input_one_property);
    input_property_set(ip_input, INPUT_HIND, "IP");
    input_property_set(ip_input, INPUT_MAX_LEN, 15);
    input_property_set(ip_input, INPUT_RET_STA, 150, INPUT_Y_COOR);
    input_property_set(ip_input, INPUT_RET_SIZ, INPUT_HEIGHT, input_length);

    input_props_set(net_input, input_two_property);
    input_property_set(net_input, INPUT_HIND, "掩码");
    input_property_set(net_input, INPUT_MAX_LEN, 15);
    input_property_set(net_input, INPUT_RET_STA, 150, INPUT_TWO_Y_COOR);
    input_property_set(net_input, INPUT_RET_SIZ, INPUT_HEIGHT, input_length);

    input_props_set(gw_input, input_three_property);
    input_property_set(gw_input, INPUT_HIND, "网关");
    input_property_set(gw_input, INPUT_MAX_LEN, 15);
    input_property_set(gw_input, INPUT_RET_STA, 150, INPUT_THREE_Y_COOR);
    input_property_set(gw_input, INPUT_RET_SIZ, INPUT_HEIGHT, input_length);

    input_dis(MAIN_DISP, ip_input);
    input_dis(MAIN_DISP, net_input);
    input_dis(MAIN_DISP, gw_input);

    lcd_160_upd();

    input_key_manege(MAIN_DISP, ip_input, lcd_160_upd);
    input_key_manege(MAIN_DISP, net_input, lcd_160_upd);
    input_key_manege(MAIN_DISP, gw_input, lcd_160_upd);

    char ip[24] = {0};
    char netmask[24] = {0};
    char gw[24] = {0};

    input_str_get(ip_input, ip);
    input_str_get(net_input, netmask);
    input_str_get(gw_input, gw);

    input_destory(ip_input);
    input_destory(net_input);
    input_destory(gw_input);

    if (check_ip_valid(ip)
            || check_ip_valid(netmask)
            || check_ip_valid(gw))
    {
        disp_msg("输入格式错误", 10);
        return;
    }

    if (set_local_ip(ip, netmask, gw))
    {
        disp_msg("修改IP失败", 10);
    }
    else
    {
        update_config("dev.ip", ip);
        update_config("dev.netmask", netmask);
        update_config("dev.gateway", gw);
        disp_msg("设置IP成功", 5);
    }

}