static int hdmi_power_on_full(struct omap_dss_device *dssdev)
{
int r;
struct omap_video_timings *p;
struct omap_overlay_manager *mgr = hdmi.output.manager;
struct dss_pll_clock_info hdmi_cinfo = { 0 };
r = hdmi_power_on_core(dssdev);
if (r)
return r;
p = &hdmi.cfg.timings;
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
hdmi_pll_compute(&hdmi.pll, p->pixelclock, &hdmi_cinfo);
/* disable and clear irqs */
hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
hdmi_wp_set_irqstatus(&hdmi.wp,
hdmi_wp_get_irqstatus(&hdmi.wp));
r = dss_pll_enable(&hdmi.pll.pll);
if (r) {
DSSERR("Failed to enable PLL\n");
goto err_pll_enable;
}
r = dss_pll_set_config(&hdmi.pll.pll, &hdmi_cinfo);
if (r) {
DSSERR("Failed to configure PLL\n");
goto err_pll_cfg;
}
r = hdmi_phy_configure(&hdmi.phy, hdmi_cinfo.clkdco,
hdmi_cinfo.clkout[0]);
if (r) {
DSSDBG("Failed to start PHY\n");
goto err_phy_cfg;
}
r = hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_LDOON);
if (r)
goto err_phy_pwr;
hdmi5_configure(&hdmi.core, &hdmi.wp, &hdmi.cfg);
/* bypass TV gamma table */
dispc_enable_gamma_table(0);
/* tv size */
dss_mgr_set_timings(mgr, p);
r = hdmi_wp_video_start(&hdmi.wp);
if (r)
goto err_vid_enable;
r = dss_mgr_enable(mgr);
if (r)
goto err_mgr_enable;
hdmi_wp_set_irqenable(&hdmi.wp,
HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
return 0;
err_mgr_enable:
hdmi_wp_video_stop(&hdmi.wp);
err_vid_enable:
hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
err_phy_pwr:
err_phy_cfg:
err_pll_cfg:
dss_pll_disable(&hdmi.pll.pll);
err_pll_enable:
hdmi_power_off_core(dssdev);
return -EIO;
}
static int hdmi_power_on_full(struct omap_dss_device *dssdev)
{
int r;
struct omap_video_timings *p;
struct omap_overlay_manager *mgr = dssdev->output->manager;
unsigned long phy;
r = hdmi_power_on_core(dssdev);
if (r)
return r;
dss_mgr_disable(mgr);
p = &hdmi.ip_data.cfg.timings;
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
phy = p->pixel_clock;
hdmi_compute_pll(dssdev, phy, &hdmi.ip_data.pll_data);
hdmi.ip_data.ops->video_disable(&hdmi.ip_data);
/* config the PLL and PHY hdmi_set_pll_pwrfirst */
r = hdmi.ip_data.ops->pll_enable(&hdmi.ip_data);
if (r) {
DSSDBG("Failed to lock PLL\n");
goto err_pll_enable;
}
r = hdmi.ip_data.ops->phy_enable(&hdmi.ip_data);
if (r) {
DSSDBG("Failed to start PHY\n");
goto err_phy_enable;
}
hdmi.ip_data.ops->video_configure(&hdmi.ip_data);
/* bypass TV gamma table */
dispc_enable_gamma_table(0);
/* tv size */
dss_mgr_set_timings(mgr, p);
r = hdmi.ip_data.ops->video_enable(&hdmi.ip_data);
if (r)
goto err_vid_enable;
r = dss_mgr_enable(mgr);
if (r)
goto err_mgr_enable;
return 0;
err_mgr_enable:
hdmi.ip_data.ops->video_disable(&hdmi.ip_data);
err_vid_enable:
hdmi.ip_data.ops->phy_disable(&hdmi.ip_data);
err_phy_enable:
hdmi.ip_data.ops->pll_disable(&hdmi.ip_data);
err_pll_enable:
hdmi_power_off_core(dssdev);
return -EIO;
}
static int hdmi_power_on(struct omap_dss_device *dssdev)
{
int r, code = 0;
struct omap_video_timings *p;
unsigned long phy;
r = hdmi_runtime_get();
if (r)
return r;
dss_mgr_disable(dssdev->manager);
p = &dssdev->panel.timings;
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n",
dssdev->panel.timings.x_res,
dssdev->panel.timings.y_res);
code = get_timings_index();
update_hdmi_timings(&hdmi.ip_data.cfg, p, code);
phy = p->pixel_clock;
hdmi_compute_pll(dssdev, phy, &hdmi.ip_data.pll_data);
hdmi.ip_data.ops->video_enable(&hdmi.ip_data, 0);
/* config the PLL and PHY hdmi_set_pll_pwrfirst */
r = hdmi.ip_data.ops->pll_enable(&hdmi.ip_data);
if (r) {
DSSDBG("Failed to lock PLL\n");
goto err;
}
r = hdmi.ip_data.ops->phy_enable(&hdmi.ip_data);
if (r) {
DSSDBG("Failed to start PHY\n");
goto err;
}
hdmi.ip_data.cfg.cm.mode = hdmi.mode;
hdmi.ip_data.cfg.cm.code = hdmi.code;
hdmi.ip_data.ops->video_configure(&hdmi.ip_data);
/* Make selection of HDMI in DSS */
dss_select_hdmi_venc_clk_source(DSS_HDMI_M_PCLK);
/* Select the dispc clock source as PRCM clock, to ensure that it is not
* DSI PLL source as the clock selected by DSI PLL might not be
* sufficient for the resolution selected / that can be changed
* dynamically by user. This can be moved to single location , say
* Boardfile.
*/
dss_select_dispc_clk_source(dssdev->clocks.dispc.dispc_fclk_src);
/* bypass TV gamma table */
dispc_enable_gamma_table(0);
/* tv size */
dispc_set_digit_size(dssdev->panel.timings.x_res,
dssdev->panel.timings.y_res);
hdmi.ip_data.ops->video_enable(&hdmi.ip_data, 1);
r = dss_mgr_enable(dssdev->manager);
if (r)
goto err_mgr_enable;
return 0;
err_mgr_enable:
hdmi.ip_data.ops->video_enable(&hdmi.ip_data, 0);
hdmi.ip_data.ops->phy_disable(&hdmi.ip_data);
hdmi.ip_data.ops->pll_disable(&hdmi.ip_data);
err:
hdmi_runtime_put();
return -EIO;
}
static int hdmi_power_on(struct omap_dss_device *dssdev)
{
int r;
struct omap_video_timings *p;
struct omap_overlay_manager *mgr = dssdev->output->manager;
unsigned long phy;
gpio_set_value(hdmi.ct_cp_hpd_gpio, 1);
gpio_set_value(hdmi.ls_oe_gpio, 1);
/* wait 300us after CT_CP_HPD for the 5V power output to reach 90% */
udelay(300);
r = regulator_enable(hdmi.vdda_hdmi_dac_reg);
if (r)
goto err_vdac_enable;
r = hdmi_runtime_get();
if (r)
goto err_runtime_get;
dss_mgr_disable(mgr);
p = &hdmi.ip_data.cfg.timings;
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
phy = p->pixel_clock;
hdmi_compute_pll(dssdev, phy, &hdmi.ip_data.pll_data);
hdmi.ip_data.ops->video_disable(&hdmi.ip_data);
/* config the PLL and PHY hdmi_set_pll_pwrfirst */
r = hdmi.ip_data.ops->pll_enable(&hdmi.ip_data);
if (r) {
DSSDBG("Failed to lock PLL\n");
goto err_pll_enable;
}
r = hdmi.ip_data.ops->phy_enable(&hdmi.ip_data);
if (r) {
DSSDBG("Failed to start PHY\n");
goto err_phy_enable;
}
hdmi.ip_data.ops->video_configure(&hdmi.ip_data);
/* Make selection of HDMI in DSS */
dss_select_hdmi_venc_clk_source(DSS_HDMI_M_PCLK);
/* Select the dispc clock source as PRCM clock, to ensure that it is not
* DSI PLL source as the clock selected by DSI PLL might not be
* sufficient for the resolution selected / that can be changed
* dynamically by user. This can be moved to single location , say
* Boardfile.
*/
dss_select_dispc_clk_source(dssdev->clocks.dispc.dispc_fclk_src);
/* bypass TV gamma table */
dispc_enable_gamma_table(0);
/* tv size */
dss_mgr_set_timings(mgr, p);
r = hdmi.ip_data.ops->video_enable(&hdmi.ip_data);
if (r)
goto err_vid_enable;
r = dss_mgr_enable(mgr);
if (r)
goto err_mgr_enable;
return 0;
err_mgr_enable:
hdmi.ip_data.ops->video_disable(&hdmi.ip_data);
err_vid_enable:
hdmi.ip_data.ops->phy_disable(&hdmi.ip_data);
err_phy_enable:
hdmi.ip_data.ops->pll_disable(&hdmi.ip_data);
err_pll_enable:
hdmi_runtime_put();
err_runtime_get:
regulator_disable(hdmi.vdda_hdmi_dac_reg);
err_vdac_enable:
gpio_set_value(hdmi.ct_cp_hpd_gpio, 0);
gpio_set_value(hdmi.ls_oe_gpio, 0);
return -EIO;
}
static int hdmi_power_on_full(struct omap_dss_device *dssdev)
{
int r;
struct omap_video_timings *p;
enum omap_channel channel = dssdev->dispc_channel;
struct hdmi_wp_data *wp = &hdmi.wp;
struct dss_pll_clock_info hdmi_cinfo = { 0 };
unsigned pc;
r = hdmi_power_on_core(dssdev);
if (r)
return r;
/* disable and clear irqs */
hdmi_wp_clear_irqenable(wp, 0xffffffff);
hdmi_wp_set_irqstatus(wp, 0xffffffff);
p = &hdmi.cfg.timings;
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
pc = p->pixelclock;
if (p->double_pixel)
pc *= 2;
hdmi_pll_compute(&hdmi.pll, pc, &hdmi_cinfo);
r = dss_pll_enable(&hdmi.pll.pll);
if (r) {
DSSERR("Failed to enable PLL\n");
goto err_pll_enable;
}
r = dss_pll_set_config(&hdmi.pll.pll, &hdmi_cinfo);
if (r) {
DSSERR("Failed to configure PLL\n");
goto err_pll_cfg;
}
r = hdmi_phy_configure(&hdmi.phy, hdmi_cinfo.clkdco,
hdmi_cinfo.clkout[0]);
if (r) {
DSSDBG("Failed to configure PHY\n");
goto err_phy_cfg;
}
r = hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
if (r)
goto err_phy_pwr;
hdmi4_configure(&hdmi.core, &hdmi.wp, &hdmi.cfg);
/* bypass TV gamma table */
dispc_enable_gamma_table(0);
/* tv size */
dss_mgr_set_timings(channel, p);
r = dss_mgr_enable(channel);
if (r)
goto err_mgr_enable;
r = hdmi_wp_video_start(&hdmi.wp);
if (r)
goto err_vid_enable;
hdmi_wp_set_irqenable(wp,
HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
return 0;
err_vid_enable:
dss_mgr_disable(channel);
err_mgr_enable:
hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
err_phy_pwr:
err_phy_cfg:
err_pll_cfg:
dss_pll_disable(&hdmi.pll.pll);
err_pll_enable:
hdmi_power_off_core(dssdev);
return -EIO;
}
static int hdmi_power_on_full(struct omap_dss_device *dssdev)
{
int r;
struct omap_video_timings *p;
struct omap_overlay_manager *mgr = hdmi.output.manager;
struct dss_pll_clock_info hdmi_cinfo = { 0 };
r = hdmi_power_on_core(dssdev);
if (r)
return r;
p = &hdmi.cfg.timings;
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
hdmi_pll_compute(&hdmi.pll, p->pixelclock, &hdmi_cinfo);
/* disable and clear irqs */
hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
hdmi_wp_set_irqstatus(&hdmi.wp,
hdmi_wp_get_irqstatus(&hdmi.wp));
r = dss_pll_enable(&hdmi.pll.pll);
if (r) {
DSSERR("Failed to enable PLL\n");
goto err_pll_enable;
}
r = dss_pll_set_config(&hdmi.pll.pll, &hdmi_cinfo);
if (r) {
DSSERR("Failed to configure PLL\n");
goto err_pll_cfg;
}
r = hdmi_phy_configure(&hdmi.phy, hdmi_cinfo.clkdco,
hdmi_cinfo.clkout[0]);
if (r) {
DSSDBG("Failed to start PHY\n");
goto err_phy_cfg;
}
r = hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_LDOON);
if (r)
goto err_phy_pwr;
hdmi5_configure(&hdmi.core, &hdmi.wp, &hdmi.cfg);
/* bypass TV gamma table */
dispc_enable_gamma_table(0);
/* tv size */
dss_mgr_set_timings(mgr, p);
r = hdmi_wp_video_start(&hdmi.wp);
if (r)
goto err_vid_enable;
/*
* XXX Seems that on we easily get a flood of sync-lost errors when
* enabling the output. This seems to be related to the time between
* HDMI VSYNC and enabling the DISPC output.
*
* Testing shows that the sync-lost errors do not happen if we enable
* the DISPC output very soon after HDMI VBLANK. So wait here for
* VBLANK to reduce the chances of sync-losts.
*/
hdmi_write_reg(hdmi.wp.base, HDMI_WP_IRQSTATUS, HDMI_IRQ_VIDEO_VSYNC);
while (true) {
u32 v = hdmi_read_reg(hdmi.wp.base, HDMI_WP_IRQSTATUS_RAW);
if (v & HDMI_IRQ_VIDEO_VSYNC)
break;
usleep_range(500, 1000);
}
r = dss_mgr_enable(mgr);
if (r)
goto err_mgr_enable;
hdmi_wp_set_irqenable(&hdmi.wp,
HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
return 0;
err_mgr_enable:
hdmi_wp_video_stop(&hdmi.wp);
err_vid_enable:
hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
err_phy_pwr:
err_phy_cfg:
err_pll_cfg:
dss_pll_disable(&hdmi.pll.pll);
err_pll_enable:
hdmi_power_off_core(dssdev);
return -EIO;
}
