void menuModelPhaseOne(uint8_t event)
{
  FlightModeData *fm = flightModeAddress(s_currIdx);
  putsFlightMode(13*FW, 0, s_currIdx+1, (getFlightMode()==s_currIdx ? BOLD : 0));

#if defined(GVARS) && !defined(PCBSTD)
  static const pm_uint8_t mstate_tab_fm1[] PROGMEM = {0, 0, 0, (uint8_t)-1, 1, 1, 1, 1, 1};
  static const pm_uint8_t mstate_tab_others[] PROGMEM = {0, 0, 3, IF_ROTARY_ENCODERS(NUM_ROTARY_ENCODERS-1) 0, 0, (uint8_t)-1, 2, 2, 2, 2, 2};

  check(event, 0, NULL, 0, (s_currIdx == 0) ? mstate_tab_fm1 : mstate_tab_others, DIM(mstate_tab_others)-1, ITEM_MODEL_PHASE_MAX - 1 - (s_currIdx==0 ? (ITEM_MODEL_PHASE_FADE_IN-ITEM_MODEL_PHASE_SWITCH) : 0));

  TITLE(STR_MENUFLIGHTPHASE);

  #define PHASE_ONE_FIRST_LINE (1+1*FH)
#else
  SUBMENU(STR_MENUFLIGHTPHASE, 3 + (s_currIdx==0 ? 0 : 2 + (bool)NUM_ROTARY_ENCODERS), {0, 0, 3, IF_ROTARY_ENCODERS(NUM_ROTARY_ENCODERS-1) 0/*, 0*/});
  #define PHASE_ONE_FIRST_LINE (1+1*FH)
#endif

  int8_t sub = m_posVert;
  int8_t editMode = s_editMode;

#if defined(GVARS) && !defined(PCBSTD)
  if (s_currIdx == 0 && sub>=ITEM_MODEL_PHASE_SWITCH) sub += ITEM_MODEL_PHASE_FADE_IN-ITEM_MODEL_PHASE_SWITCH;

  for (uint8_t k=0; k<LCD_LINES-1; k++) {
    coord_t y = MENU_HEADER_HEIGHT + 1 + k*FH;
    int8_t i = k + s_pgOfs;
    if (s_currIdx == 0 && i>=ITEM_MODEL_PHASE_SWITCH) i += ITEM_MODEL_PHASE_FADE_IN-ITEM_MODEL_PHASE_SWITCH;
    uint8_t attr = (sub==i ? (editMode>0 ? BLINK|INVERS : INVERS) : 0);
#else
  for (uint8_t i=0, k=0, y=PHASE_ONE_FIRST_LINE; i<ITEM_MODEL_PHASE_MAX; i++, k++, y+=FH) {
    if (s_currIdx == 0 && i==ITEM_MODEL_PHASE_SWITCH) i = ITEM_MODEL_PHASE_FADE_IN;
    uint8_t attr = (sub==k ? (editMode>0 ? BLINK|INVERS : INVERS) : 0);
#endif
    switch(i) {
      case ITEM_MODEL_PHASE_NAME:
        editSingleName(MIXES_2ND_COLUMN, y, STR_PHASENAME, fm->name, sizeof(fm->name), event, attr);
        break;
      case ITEM_MODEL_PHASE_SWITCH:
        fm->swtch = switchMenuItem(MIXES_2ND_COLUMN, y, fm->swtch, attr, event);
        break;
      case ITEM_MODEL_PHASE_TRIMS:
        lcd_putsLeft(y, STR_TRIMS);
        for (uint8_t t=0; t<NUM_STICKS; t++) {
          putsTrimMode(MIXES_2ND_COLUMN+(t*FW), y, s_currIdx, t, m_posHorz==t ? attr : 0);
          if (attr && m_posHorz==t && ((editMode>0) || p1valdiff)) {
            int16_t v = getRawTrimValue(s_currIdx, t);
            if (v < TRIM_EXTENDED_MAX) v = TRIM_EXTENDED_MAX;
            v = checkIncDec(event, v, TRIM_EXTENDED_MAX, TRIM_EXTENDED_MAX+MAX_FLIGHT_MODES-1, EE_MODEL);
            if (checkIncDec_Ret) {
              if (v == TRIM_EXTENDED_MAX) v = 0;
              setTrimValue(s_currIdx, t, v);
            }
          }
        }
        break;

#if ROTARY_ENCODERS > 0
      case ITEM_MODEL_PHASE_ROTARY_ENCODERS:
        lcd_putsLeft(y, STR_ROTARY_ENCODER);
        for (uint8_t t=0; t<NUM_ROTARY_ENCODERS; t++) {
          putsRotaryEncoderMode(MIXES_2ND_COLUMN+(t*FW), y, s_currIdx, t, m_posHorz==t ? attr : 0);
          if (attr && m_posHorz==t && ((editMode>0) || p1valdiff)) {
            int16_t v = flightModeAddress(s_currIdx)->rotaryEncoders[t];
            if (v < ROTARY_ENCODER_MAX) v = ROTARY_ENCODER_MAX;
            v = checkIncDec(event, v, ROTARY_ENCODER_MAX, ROTARY_ENCODER_MAX+MAX_FLIGHT_MODES-1, EE_MODEL);
            if (checkIncDec_Ret) {
              if (v == ROTARY_ENCODER_MAX) v = 0;
              flightModeAddress(s_currIdx)->rotaryEncoders[t] = v;
            }
          }
        }
        break;
#endif

      case ITEM_MODEL_PHASE_FADE_IN:
        fm->fadeIn = EDIT_DELAY(0, y, event, attr, STR_FADEIN, fm->fadeIn);
        break;

      case ITEM_MODEL_PHASE_FADE_OUT:
        fm->fadeOut = EDIT_DELAY(0, y, event, attr, STR_FADEOUT, fm->fadeOut);
        break;

#if defined(GVARS) && !defined(PCBSTD)
      case ITEM_MODEL_PHASE_GVARS_LABEL:
        lcd_putsLeft(y, STR_GLOBAL_VARS);
        break;

      default:
      {
        uint8_t idx = i-ITEM_MODEL_PHASE_GV1;
        uint8_t posHorz = m_posHorz;
        if (attr && posHorz > 0 && s_currIdx==0) posHorz++;

        putsStrIdx(INDENT_WIDTH, y, STR_GV, idx+1);

        editName(4*FW, y, g_model.gvars[idx].name, LEN_GVAR_NAME, event, posHorz==0 ? attr : 0);

        int16_t v = fm->gvars[idx];
        if (v > GVAR_MAX) {
          uint8_t p = v - GVAR_MAX - 1;
          if (p >= s_currIdx) p++;
          putsFlightMode(11*FW, y, p+1, posHorz==1 ? attr : 0);
        }
        else {
          lcd_putsAtt(11*FW, y, STR_OWN, posHorz==1 ? attr : 0);
        }
        if (attr && s_currIdx>0 && posHorz==1 && (editMode>0 || p1valdiff)) {
          if (v < GVAR_MAX) v = GVAR_MAX;
          v = checkIncDec(event, v, GVAR_MAX, GVAR_MAX+MAX_FLIGHT_MODES-1, EE_MODEL);
          if (checkIncDec_Ret) {
            if (v == GVAR_MAX) v = 0;
            fm->gvars[idx] = v;
          }
        }

        uint8_t p = getGVarFlightPhase(s_currIdx, idx);
        lcd_outdezAtt(21*FW, y, GVAR_VALUE(idx, p), posHorz==2 ? attr : 0);
        if (attr && posHorz==2 && ((editMode>0) || p1valdiff)) {
          GVAR_VALUE(idx, p) = checkIncDec(event, GVAR_VALUE(idx, p), -GVAR_LIMIT, GVAR_LIMIT, EE_MODEL);
        }

        break;
      }
#endif
    }
  }
}

#if defined(ROTARY_ENCODERS)
  #if ROTARY_ENCODERS > 2
    #define NAME_OFS (-4-12)
    #define SWITCH_OFS (-FW/2-2-13)
    #define TRIMS_OFS  (-FW/2-4-15)
    #define ROTARY_ENC_OFS (0)
  #else
    #define NAME_OFS (-4)
    #define SWITCH_OFS (-FW/2-2)
    #define TRIMS_OFS  (-FW/2-4)
    #define ROTARY_ENC_OFS (2)
  #endif
#else
  #define NAME_OFS 0
  #define SWITCH_OFS (FW/2)
  #define TRIMS_OFS  (FW/2)
#endif

void menuModelFlightModesAll(uint8_t event)
{
  SIMPLE_MENU(STR_MENUFLIGHTPHASES, menuTabModel, e_FlightModesAll, 1+MAX_FLIGHT_MODES+1);

  int8_t sub = m_posVert - 1;

  switch (event) {
    CASE_EVT_ROTARY_BREAK
    case EVT_KEY_FIRST(KEY_ENTER):
      if (sub == MAX_FLIGHT_MODES) {
        s_editMode = 0;
        trimsCheckTimer = 200; // 2 seconds
      }
      // no break
    case EVT_KEY_FIRST(KEY_RIGHT):
      if (sub >= 0 && sub < MAX_FLIGHT_MODES) {
        s_currIdx = sub;
        pushMenu(menuModelPhaseOne);
      }
      break;
  }

  uint8_t att;
  for (uint8_t i=0; i<MAX_FLIGHT_MODES; i++) {
#if defined(CPUARM)
    int8_t y = 1 + (1+i-s_pgOfs)*FH;
    if (y<1*FH+1 || y>(LCD_LINES-1)*FH+1) continue;
#else
    uint8_t y = 1 + (i+1)*FH;
#endif
    att = (i==sub ? INVERS : 0);
    FlightModeData *p = flightModeAddress(i);
    putsFlightMode(0, y, i+1, att|(getFlightMode()==i ? BOLD : 0));

    lcd_putsnAtt(4*FW+NAME_OFS, y, p->name, sizeof(p->name), ZCHAR);
    if (i == 0) {
      lcd_puts((5+LEN_FLIGHT_MODE_NAME)*FW+SWITCH_OFS, y, STR_DEFAULT);
    }
    else {
      putsSwitches((5+LEN_FLIGHT_MODE_NAME)*FW+SWITCH_OFS, y, p->swtch, 0);
      for (uint8_t t=0; t<NUM_STICKS; t++) {
        putsTrimMode((9+LEN_FLIGHT_MODE_NAME+t)*FW+TRIMS_OFS, y, i, t, 0);
      }
#if defined(CPUM2560)
      for (uint8_t t=0; t<NUM_ROTARY_ENCODERS; t++) {
        putsRotaryEncoderMode((13+LEN_FLIGHT_MODE_NAME+t)*FW+TRIMS_OFS+ROTARY_ENC_OFS, y, i, t, 0);
      }
#endif
    }

    if (p->fadeIn || p->fadeOut) {
      lcd_putc(LCD_W-FW-MENUS_SCROLLBAR_WIDTH, y, (p->fadeIn && p->fadeOut) ? '*' : (p->fadeIn ? 'I' : 'O'));
    }
  }

#if defined(CPUARM)
  if (s_pgOfs != MAX_FLIGHT_MODES-(LCD_LINES-2)) return;
#endif

  lcd_putsLeft((LCD_LINES-1)*FH+1, STR_CHECKTRIMS);
  putsFlightMode(OFS_CHECKTRIMS, (LCD_LINES-1)*FH+1, mixerCurrentFlightMode+1);
  if (sub==MAX_FLIGHT_MODES && !trimsCheckTimer) {
    lcd_status_line();
  }
}
void menuModelSensor(uint8_t event)
{
  TelemetrySensor * sensor = & g_model.telemetrySensors[s_currIdx];

  SUBMENU(STR_MENUSENSOR, SENSOR_FIELD_MAX, {0, 0, sensor->type == TELEM_TYPE_CALCULATED ? (uint8_t)0 : (uint8_t)1, SENSOR_UNIT_ROWS, SENSOR_PREC_ROWS, SENSOR_PARAM1_ROWS, SENSOR_PARAM2_ROWS, SENSOR_PARAM3_ROWS, SENSOR_PARAM4_ROWS, SENSOR_AUTOOFFSET_ROWS, SENSOR_FILTER_ROWS, SENSOR_PERSISTENT_ROWS, 0 });
  lcd_outdezAtt(PSIZE(TR_MENUSENSOR)*FW+1, 0, s_currIdx+1, INVERS|LEFT);

  putsTelemetryChannelValue(SENSOR_2ND_COLUMN, 0, s_currIdx, getValue(MIXSRC_FIRST_TELEM+3*s_currIdx), LEFT);

  int8_t sub = m_posVert;

  for (uint8_t i=0; i<LCD_LINES-1; i++) {
    coord_t y = MENU_HEADER_HEIGHT + 1 + i*FH;
    uint8_t k = i + s_pgOfs;

    for (int j=0; j<k; j++) {
      if (mstate_tab[j+1] == HIDDEN_ROW)
        k++;
    }

    uint8_t attr = (sub==k ? (s_editMode>0 ? BLINK|INVERS : INVERS) : 0);

    switch (k) {

      case SENSOR_FIELD_NAME:
        editSingleName(SENSOR_2ND_COLUMN, y, STR_NAME, sensor->label, TELEM_LABEL_LEN, event, attr);
        break;

      case SENSOR_FIELD_TYPE:
        sensor->type = selectMenuItem(SENSOR_2ND_COLUMN, y, NO_INDENT(STR_TYPE), STR_VSENSORTYPES, sensor->type, 0, 1, attr, event);
        if (attr && checkIncDec_Ret) {
          sensor->instance = 0;
          if (sensor->type == TELEM_TYPE_CALCULATED) {
            sensor->param = 0;
            sensor->autoOffset = 0;
            sensor->filter = 0;
          }
        }
        break;

      case SENSOR_FIELD_ID:
        if (sensor->type == TELEM_TYPE_CUSTOM) {
          lcd_putsLeft(y, STR_ID);
          lcd_outhex4(SENSOR_2ND_COLUMN, y, sensor->id, LEFT|(m_posHorz==0 ? attr : 0));
          lcd_outdezAtt(SENSOR_3RD_COLUMN, y, sensor->instance, LEFT|(m_posHorz==1 ? attr : 0));
          if (attr) {
            switch (m_posHorz) {
              case 0:
                CHECK_INCDEC_MODELVAR_ZERO(event, sensor->id, 0xffff);
                break;

              case 1:
                CHECK_INCDEC_MODELVAR_ZERO(event, sensor->instance, 0xff);
                break;
            }
          }
        }
        else {
          sensor->formula = selectMenuItem(SENSOR_2ND_COLUMN, y, STR_FORMULA, STR_VFORMULAS, sensor->formula, 0, TELEM_FORMULA_LAST, attr, event);
          if (attr && checkIncDec_Ret) {
            sensor->param = 0;
            if (sensor->formula == TELEM_FORMULA_CELL) {
              sensor->unit = UNIT_VOLTS;
              sensor->prec = 2;
            }
            else if (sensor->formula == TELEM_FORMULA_DIST) {
              sensor->unit = UNIT_DIST;
              sensor->prec = 0;
            }
            else if (sensor->formula == TELEM_FORMULA_CONSUMPTION) {
              sensor->unit = UNIT_MAH;
              sensor->prec = 0;
            }
          }
        }
        break;

      case SENSOR_FIELD_UNIT:
        lcd_putsLeft(y, "Unit");
        // TODO flash saving with selectMenuItem where I copied those 2 lines?
        lcd_putsiAtt(SENSOR_2ND_COLUMN, y, STR_VTELEMUNIT, sensor->unit, attr);
        if (attr) {
          CHECK_INCDEC_MODELVAR_ZERO(event, sensor->unit, UNIT_MAX);
          if (checkIncDec_Ret) {
            telemetryItems[s_currIdx].clear();
          }
        }
        break;

      case SENSOR_FIELD_PRECISION:
        sensor->prec = selectMenuItem(SENSOR_2ND_COLUMN, y, STR_PRECISION, STR_VPREC, sensor->prec, 0, 2, attr, event);
        if (attr && checkIncDec_Ret) {
          telemetryItems[s_currIdx].clear();
        }
        break;

      case SENSOR_FIELD_PARAM1:
        if (sensor->type == TELEM_TYPE_CALCULATED) {
          if (sensor->formula == TELEM_FORMULA_CELL) {
            lcd_putsLeft(y, STR_CELLSENSOR);
            putsMixerSource(SENSOR_2ND_COLUMN, y, sensor->cell.source ? MIXSRC_FIRST_TELEM+3*(sensor->cell.source-1) : 0, attr);
            if (attr) {
              sensor->cell.source = checkIncDec(event, sensor->cell.source, 0, MAX_SENSORS, EE_MODEL|NO_INCDEC_MARKS, isCellsSensor);
            }
            break;
          }
          else if (sensor->formula == TELEM_FORMULA_DIST) {
            lcd_putsLeft(y, STR_GPSSENSOR);
            putsMixerSource(SENSOR_2ND_COLUMN, y, sensor->dist.gps ? MIXSRC_FIRST_TELEM+3*(sensor->dist.gps-1) : 0, attr);
            if (attr) {
              sensor->dist.gps = checkIncDec(event, sensor->dist.gps, 0, MAX_SENSORS, EE_MODEL|NO_INCDEC_MARKS, isGPSSensor);
            }
            break;
          }
          else if (sensor->formula == TELEM_FORMULA_CONSUMPTION) {
            lcd_putsLeft(y, STR_CURRENTSENSOR);
            putsMixerSource(SENSOR_2ND_COLUMN, y, sensor->consumption.source ? MIXSRC_FIRST_TELEM+3*(sensor->consumption.source-1) : 0, attr);
            if (attr) {
              sensor->consumption.source = checkIncDec(event, sensor->consumption.source, 0, MAX_SENSORS, EE_MODEL|NO_INCDEC_MARKS, isCurrentSensor);
            }
            break;
          }
        }
        else {
          if (sensor->unit == UNIT_RPMS) {
            lcd_putsLeft(y, NO_INDENT(STR_BLADES));
            if (attr) CHECK_INCDEC_MODELVAR(event, sensor->custom.ratio, 1, 30000);
            lcd_outdezAtt(SENSOR_2ND_COLUMN, y, sensor->custom.ratio, LEFT|attr);
            break;
          }
          else {
            lcd_putsLeft(y, STR_RATIO);
            if (attr) CHECK_INCDEC_MODELVAR(event, sensor->custom.ratio, 0, 30000);
            if (sensor->custom.ratio == 0)
              lcd_putcAtt(SENSOR_2ND_COLUMN, y, '-', attr);
            else
              lcd_outdezAtt(SENSOR_2ND_COLUMN, y, sensor->custom.ratio, LEFT|attr|PREC1);
            break;
          }
        }
        // no break

      case SENSOR_FIELD_PARAM2:
        if (sensor->type == TELEM_TYPE_CALCULATED) {
          if (sensor->formula == TELEM_FORMULA_CELL) {
            sensor->cell.index = selectMenuItem(SENSOR_2ND_COLUMN, y, STR_CELLINDEX, STR_VCELLINDEX, sensor->cell.index, 0, 8, attr, event);
            break;
          }
          else if (sensor->formula == TELEM_FORMULA_DIST) {
            lcd_putsLeft(y, STR_ALTSENSOR);
            putsMixerSource(SENSOR_2ND_COLUMN, y, sensor->dist.alt ? MIXSRC_FIRST_TELEM+3*(sensor->dist.alt-1) : 0, attr);
            if (attr) {
              sensor->dist.alt = checkIncDec(event, sensor->dist.alt, 0, MAX_SENSORS, EE_MODEL|NO_INCDEC_MARKS, isAltSensor);
            }
            break;
          }
        }
        else {
          lcd_putsLeft(y, NO_INDENT(STR_OFFSET));
          if (attr) CHECK_INCDEC_MODELVAR(event, sensor->custom.offset, -30000, +30000);
          if (sensor->prec > 0) attr |= (sensor->prec == 2 ? PREC2 : PREC1);
          lcd_outdezAtt(SENSOR_2ND_COLUMN, y, sensor->custom.offset, LEFT|attr);
          break;
        }
        // no break

      case SENSOR_FIELD_PARAM3:
        // no break

      case SENSOR_FIELD_PARAM4:
      {
        putsStrIdx(0, y, NO_INDENT(STR_SOURCE), k-SENSOR_FIELD_PARAM1+1);
        int8_t & source = sensor->calc.sources[k-SENSOR_FIELD_PARAM1];
        if (attr) {
          source = checkIncDec(event, source, -MAX_SENSORS, MAX_SENSORS, EE_MODEL|NO_INCDEC_MARKS, isSensorAvailable);
        }
        if (source < 0) {
          lcd_putcAtt(SENSOR_2ND_COLUMN, y, '-', attr);
          putsMixerSource(lcdNextPos, y, MIXSRC_FIRST_TELEM+3*(-1-source), attr);
        }
        else {
          putsMixerSource(SENSOR_2ND_COLUMN, y, source ? MIXSRC_FIRST_TELEM+3*(source-1) : 0, attr);
        }
        break;
      }

      case SENSOR_FIELD_AUTOOFFSET:
        ON_OFF_MENU_ITEM(sensor->autoOffset, SENSOR_2ND_COLUMN, y, STR_AUTOOFFSET, attr, event);
        break;
        
      case SENSOR_FIELD_ONLYPOSITIVE:
        ON_OFF_MENU_ITEM(sensor->onlyPositive, SENSOR_2ND_COLUMN, y, STR_ONLYPOSITIVE, attr, event);
        break;

      case SENSOR_FIELD_FILTER:
        ON_OFF_MENU_ITEM(sensor->filter, SENSOR_2ND_COLUMN, y, STR_FILTER, attr, event);
        break;
        
      case SENSOR_FIELD_PERSISTENT:
        ON_OFF_MENU_ITEM(sensor->persistent, SENSOR_2ND_COLUMN, y, NO_INDENT(STR_PERSISTENT), attr, event);
        break;

      case SENSOR_FIELD_LOGS:
        ON_OFF_MENU_ITEM(sensor->logs, SENSOR_2ND_COLUMN, y, STR_LOGS, attr, event);
        break;

    }
  }
}
void menuModelSetup(uint8_t event)
{
#if   defined(CPUM64)
#define CURSOR_ON_CELL                    (true)
#define MODEL_SETUP_MAX_LINES             ((IS_PPM_PROTOCOL(protocol)||IS_DSM2_PROTOCOL(protocol)||IS_PXX_PROTOCOL(protocol)) ? 1+ITEM_MODEL_SETUP_MAX : ITEM_MODEL_SETUP_MAX)
  uint8_t protocol = g_model.protocol;
  MENU_TAB({ 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 0, 0, 0, 0, 0, 0, 0, 5, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, FIELD_PROTOCOL_MAX, 2 });
#else
#define CURSOR_ON_CELL                    (true)
#define MODEL_SETUP_MAX_LINES             ((IS_PPM_PROTOCOL(protocol)||IS_DSM2_PROTOCOL(protocol)||IS_PXX_PROTOCOL(protocol)) ? 1+ITEM_MODEL_SETUP_MAX : ITEM_MODEL_SETUP_MAX)
  uint8_t protocol = g_model.protocol;
  MENU_TAB({ 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 0, 1, 0, 0, 0, 0, 0, NUM_SWITCHES, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, FIELD_PROTOCOL_MAX, 2, });
#endif

  MENU_CHECK(menuTabModel, e_ModelSetup, MODEL_SETUP_MAX_LINES);


  TITLE(STR_MENUSETUP);

  uint8_t sub = menuVerticalPosition - 1;
  int8_t editMode = s_editMode;

  for (uint8_t i=0; i<NUM_BODY_LINES; ++i) {
    coord_t y = MENU_HEADER_HEIGHT + 1 + i*FH;
    uint8_t k = i+menuVerticalOffset;

    LcdFlags blink = ((editMode>0) ? BLINK|INVERS : INVERS);
    LcdFlags attr = (sub == k ? blink : 0);

    switch(k) {
    case ITEM_MODEL_NAME:
      editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_MODELNAME, g_model.header.name, sizeof(g_model.header.name), event, attr);
      break;

    case ITEM_MODEL_TIMER1:
    case ITEM_MODEL_TIMER2:
    case ITEM_MODEL_TIMER1_MINUTE_BEEP:
    case ITEM_MODEL_TIMER2_MINUTE_BEEP:
    case ITEM_MODEL_TIMER1_COUNTDOWN_BEEP:
    case ITEM_MODEL_TIMER2_COUNTDOWN_BEEP:
      {
        TimerData *timer = &g_model.timers[k>=ITEM_MODEL_TIMER2 ? 1 : 0];
        if (k==ITEM_MODEL_TIMER1_MINUTE_BEEP || k==ITEM_MODEL_TIMER2_MINUTE_BEEP) {
          timer->minuteBeep = onoffMenuItem(timer->minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
        }
        else if (k==ITEM_MODEL_TIMER1_COUNTDOWN_BEEP || k==ITEM_MODEL_TIMER2_COUNTDOWN_BEEP) {
          timer->countdownBeep = onoffMenuItem(timer->countdownBeep, MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, attr, event);
        }
        else {
          lcdDrawStringWithIndex(0*FW, y, STR_TIMER, k>=ITEM_MODEL_TIMER2 ? 2 : 1);
          lcdPutsTimerMode(MODEL_SETUP_2ND_COLUMN, y, timer->mode, menuHorizontalPosition==0 ? attr : 0);
          putsTimer(MODEL_SETUP_2ND_COLUMN+5*FW-2+5*FWNUM+1, y, timer->start, menuHorizontalPosition==1 ? attr : 0, menuHorizontalPosition==2 ? attr : 0);
          if (attr && (editMode>0 || p1valdiff)) {
            div_t qr = div(timer->start, 60);
            switch (menuHorizontalPosition) {
            case 0:
              CHECK_INCDEC_MODELVAR_CHECK(event, timer->mode, SWSRC_FIRST, TMRMODE_COUNT+SWSRC_LAST-1/*SWSRC_None removed*/, isSwitchAvailableInTimers);
              break;
            case 1:
              CHECK_INCDEC_MODELVAR_ZERO(event, qr.quot, 59);
              timer->start = qr.rem + qr.quot*60;
              break;
            case 2:
              qr.rem -= checkIncDecModel(event, qr.rem+2, 1, 62)-2;
              timer->start -= qr.rem ;
#if defined(CPUM2560)
              if ((int16_t)timer->start < 0) timer->start=0;
              if ((int16_t)timer->start > 5999) timer->start=32399; // 8:59:59
#endif
              break;
            }
          }
        }
        break;
      }

#if defined(CPUM2560)
    case ITEM_MODEL_TIMER1_PERSISTENT:
    case ITEM_MODEL_TIMER2_PERSISTENT:
      {
        TimerData &timer = g_model.timers[k==ITEM_MODEL_TIMER2_PERSISTENT];
        timer.persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, timer.persistent, 0, 2, attr, event);
        break;
      }
#endif

    case ITEM_MODEL_EXTENDED_LIMITS:
      ON_OFF_MENU_ITEM(g_model.extendedLimits, MODEL_SETUP_2ND_COLUMN, y, STR_ELIMITS, attr, event);
      break;

    case ITEM_MODEL_EXTENDED_TRIMS:
#if defined(CPUM64)
      ON_OFF_MENU_ITEM(g_model.extendedTrims, MODEL_SETUP_2ND_COLUMN, y, STR_ETRIMS, attr, event);
#else
      ON_OFF_MENU_ITEM(g_model.extendedTrims, MODEL_SETUP_2ND_COLUMN, y, STR_ETRIMS, menuHorizontalPosition<=0 ? attr : 0, event==EVT_KEY_BREAK(KEY_ENTER) ? event : 0);
      lcdDrawTextAtt(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_RESET_BTN, (menuHorizontalPosition>0  && !NO_HIGHLIGHT()) ? attr : 0);
      if (attr && menuHorizontalPosition>0) {
        s_editMode = 0;
        if (event==EVT_KEY_LONG(KEY_ENTER)) {
          START_NO_HIGHLIGHT();
          for (uint8_t i=0; i<MAX_FLIGHT_MODES; i++) {
            memclear(&g_model.flightModeData[i], TRIMS_ARRAY_SIZE);
          }
          eeDirty(EE_MODEL);
          AUDIO_WARNING1();
        }
      }
#endif
      break;


    case ITEM_MODEL_TRIM_INC:
      g_model.trimInc = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_TRIMINC, STR_VTRIMINC, g_model.trimInc, -2, 2, attr, event);
      break;

    case ITEM_MODEL_THROTTLE_REVERSED:
      ON_OFF_MENU_ITEM(g_model.throttleReversed, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEREVERSE, attr, event ) ;
      break;

    case ITEM_MODEL_THROTTLE_TRACE:
      {
        lcdDrawTextLeft(y, STR_TTRACE);
        if (attr) CHECK_INCDEC_MODELVAR_ZERO(event, g_model.thrTraceSrc, NUM_POTS+NUM_CHNOUT);
        uint8_t idx = g_model.thrTraceSrc + MIXSRC_Thr;
        if (idx > MIXSRC_Thr)
        idx += 1;
        if (idx >= MIXSRC_FIRST_POT+NUM_POTS)
        idx += MIXSRC_CH1 - MIXSRC_FIRST_POT - NUM_POTS;
        putsMixerSource(MODEL_SETUP_2ND_COLUMN, y, idx, attr);
        break;
      }

    case ITEM_MODEL_THROTTLE_TRIM:
      ON_OFF_MENU_ITEM(g_model.thrTrim, MODEL_SETUP_2ND_COLUMN, y, STR_TTRIM, attr, event);
      break;


    case ITEM_MODEL_THROTTLE_WARNING:
      g_model.disableThrottleWarning = !onoffMenuItem(!g_model.disableThrottleWarning, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEWARNING, attr, event);
      break;

    case ITEM_MODEL_SWITCHES_WARNING:
      {
        lcdDrawTextLeft(y, STR_SWITCHWARNING);
        swarnstate_t states = g_model.switchWarningState;
        char c;
        if (attr) {
          s_editMode = 0;
          if (!READ_ONLY()) {
            switch (event) {
              CASE_EVT_ROTARY_BREAK
            case EVT_KEY_BREAK(KEY_ENTER):
#if defined(CPUM64)
              g_model.switchWarningEnable ^= (1 << menuHorizontalPosition);
              eeDirty(EE_MODEL);
#else
              if (menuHorizontalPosition < NUM_SWITCHES-1) {
                g_model.switchWarningEnable ^= (1 << menuHorizontalPosition);
                eeDirty(EE_MODEL);
              }
#endif
              break;

            case EVT_KEY_LONG(KEY_ENTER):
#if defined(CPUM64)
              getMovedSwitch();
              g_model.switchWarningState = switches_states;
              AUDIO_WARNING1();
              eeDirty(EE_MODEL);
#else
              if (menuHorizontalPosition == NUM_SWITCHES-1) {
                START_NO_HIGHLIGHT();
                getMovedSwitch();
                g_model.switchWarningState = switches_states;
                AUDIO_WARNING1();
                eeDirty(EE_MODEL);
              }
#endif
              killEvents(event);
              break;
            }
          }
        }

        LcdFlags line = attr;

        for (uint8_t i=0; i<NUM_SWITCHES-1/*not on TRN switch*/; i++) {
          uint8_t swactive = !(g_model.switchWarningEnable & 1 << i);
          attr = 0;

          if (IS_3POS(i)) {
            c = '0'+(states & 0x03);
            states >>= 2;
          }
          else {
            if ((states & 0x01) && swactive)
            attr = INVERS;
            c = pgm_read_byte(STR_VSWITCHES - 2 + 9 + (3*(i+1)));
            states >>= 1;
          }
          if (line && (menuHorizontalPosition == i)) {
            attr = BLINK;
            if (swactive)
            attr |= INVERS;
          }
          lcdDrawCharAtt(MODEL_SETUP_2ND_COLUMN+i*FW, y, (swactive || (attr & BLINK)) ? c : '-', attr);
#if !defined(CPUM64)
          lcdDrawTextAtt(MODEL_SETUP_2ND_COLUMN+(NUM_SWITCHES*FW), y, PSTR("<]"), (menuHorizontalPosition == NUM_SWITCHES-1 && !NO_HIGHLIGHT()) ? line : 0);
#endif
        }
        break;
      }

    case ITEM_MODEL_BEEP_CENTER:
      lcdDrawTextLeft(y, STR_BEEPCTR);
      for (uint8_t i=0; i<NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS; i++) {
        // TODO flash saving, \001 not needed in STR_RETA123
        coord_t x = MODEL_SETUP_2ND_COLUMN+i*FW;
        lcdDrawTextAtIndex(x, y, STR_RETA123, i, ((menuHorizontalPosition==i) && attr) ? BLINK|INVERS : (((g_model.beepANACenter & ((BeepANACenter)1<<i)) || (attr && CURSOR_ON_LINE())) ? INVERS : 0 ) );
      }
      if (attr && CURSOR_ON_CELL) {
        if (event==EVT_KEY_BREAK(KEY_ENTER) || p1valdiff) {
          if (READ_ONLY_UNLOCKED()) {
            s_editMode = 0;
            g_model.beepANACenter ^= ((BeepANACenter)1<<menuHorizontalPosition);
            eeDirty(EE_MODEL);
          }
        }
      }
      break;








    case ITEM_MODEL_PPM1_PROTOCOL:
      lcdDrawTextLeft(y, NO_INDENT(STR_PROTO));
      lcdDrawTextAtIndex(MODEL_SETUP_2ND_COLUMN, y, STR_VPROTOS, protocol, menuHorizontalPosition<=0 ? attr : 0);
      if (IS_PPM_PROTOCOL(protocol)) {
        lcdDrawTextAtIndex(MODEL_SETUP_2ND_COLUMN+7*FW, y, STR_NCHANNELS, g_model.ppmNCH+2, menuHorizontalPosition!=0 ? attr : 0);
      }
      else if (menuHorizontalPosition>0 && attr) {
        MOVE_CURSOR_FROM_HERE();
      }
      if (attr && (editMode>0 || p1valdiff || (!IS_PPM_PROTOCOL(protocol) && !IS_DSM2_PROTOCOL(protocol)))) {
        switch (menuHorizontalPosition) {
        case 0:
          CHECK_INCDEC_MODELVAR_ZERO(event, g_model.protocol, PROTO_MAX-1);
          break;
        case 1:
          CHECK_INCDEC_MODELVAR(event, g_model.ppmNCH, -2, 4);
          g_model.ppmFrameLength = g_model.ppmNCH * 8;
          break;
        }
      }
      break;

#if 0
    case ITEM_MODEL_PPM2_PROTOCOL:
      lcdDrawTextLeft(y, PSTR("Port2"));
      lcdDrawTextAtIndex(MODEL_SETUP_2ND_COLUMN, y, STR_VPROTOS, 0, 0);
      lcdDrawTextAtt(MODEL_SETUP_2ND_COLUMN+4*FW+3, y, STR_CH, menuHorizontalPosition<=0 ? attr : 0);
      lcdDrawNumberAttUnit(lcdLastPos, y, g_model.moduleData[1].channelsStart+1, LEFT | (menuHorizontalPosition<=0 ? attr : 0));
      lcdDrawChar(lcdLastPos, y, '-');
      lcdDrawNumberAttUnit(lcdLastPos + FW+1, y, g_model.moduleData[1].channelsStart+8+g_model.moduleData[1].channelsCount, LEFT | (menuHorizontalPosition!=0 ? attr : 0));
      if (attr && (editMode>0 || p1valdiff)) {
        switch (menuHorizontalPosition) {
        case 0:
          CHECK_INCDEC_MODELVAR_ZERO(event, g_model.moduleData[1].channelsStart, 32-8-g_model.moduleData[1].channelsCount);
          SET_DEFAULT_PPM_FRAME_LENGTH(1);
          break;
        case 1:
          CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].channelsCount, -4, min<int8_t>(8, 32-8-g_model.moduleData[1].channelsStart));
          SET_DEFAULT_PPM_FRAME_LENGTH(1);
          break;
        }
      }
      break;

    case ITEM_MODEL_PPM2_PARAMS:
      lcdDrawTextLeft(y, STR_PPMFRAME);
      lcdDrawText(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
      lcdDrawNumberAttUnit(MODEL_SETUP_2ND_COLUMN, y, (int16_t)g_model.moduleData[1].ppmFrameLength*5 + 225, (menuHorizontalPosition<=0 ? attr : 0) | PREC1|LEFT);
      lcdDrawChar(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
      lcdDrawNumberAttUnit(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (g_model.moduleData[1].ppmDelay*50)+300, (menuHorizontalPosition < 0 || menuHorizontalPosition==1) ? attr : 0);
      lcdDrawCharAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, g_model.moduleData[1].ppmPulsePol ? '+' : '-', (menuHorizontalPosition < 0 || menuHorizontalPosition==2) ? attr : 0);
      if (attr && (editMode>0 || p1valdiff)) {
        switch (menuHorizontalPosition) {
        case 0:
          CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].ppmFrameLength, -20, 35);
          break;
        case 1:
          CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].ppmDelay, -4, 10);
          break;
        case 2:
          CHECK_INCDEC_MODELVAR_ZERO(event, g_model.moduleData[1].ppmPulsePol, 1);
          break;
        }
      }
      break;
#endif

    case ITEM_MODEL_PPM1_PARAMS:
      if (IS_PPM_PROTOCOL(protocol)) {
        lcdDrawTextLeft(y, STR_PPMFRAME);
        lcdDrawText(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
        lcdDrawNumberAttUnit(MODEL_SETUP_2ND_COLUMN, y, (int16_t)g_model.ppmFrameLength*5 + 225, (menuHorizontalPosition<=0 ? attr : 0) | PREC1|LEFT);
        lcdDrawChar(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
        lcdDrawNumberAttUnit(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (g_model.ppmDelay*50)+300, (CURSOR_ON_LINE() || menuHorizontalPosition==1) ? attr : 0);
        lcdDrawCharAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, g_model.pulsePol ? '+' : '-', (CURSOR_ON_LINE() || menuHorizontalPosition==2) ? attr : 0);
        if (attr && (editMode>0 || p1valdiff)) {
          switch (menuHorizontalPosition) {
          case 0:
            CHECK_INCDEC_MODELVAR(event, g_model.ppmFrameLength, -20, 35);
            break;
          case 1:
            CHECK_INCDEC_MODELVAR(event, g_model.ppmDelay, -4, 10);
            break;
          case 2:
            CHECK_INCDEC_MODELVAR_ZERO(event, g_model.pulsePol, 1);
            break;
          }
        }
      }
#if defined(DSM2) || defined(PXX)
      else if (IS_DSM2_PROTOCOL(protocol) || IS_PXX_PROTOCOL(protocol)) {
        if (attr && menuHorizontalPosition > 1) {
          REPEAT_LAST_CURSOR_MOVE(); // limit 3 column row to 2 colums (Rx_Num and RANGE fields)
        }
        lcdDrawTextLeft(y, STR_RXNUM);
        lcdDrawNumberNAtt(MODEL_SETUP_2ND_COLUMN, y, g_model.header.modelId[0], (menuHorizontalPosition<=0 ? attr : 0) | LEADING0|LEFT, 2);
        if (attr && (menuHorizontalPosition==0 && (editMode>0 || p1valdiff))) {
          CHECK_INCDEC_MODELVAR_ZERO(event, g_model.header.modelId[0], 99);
        }
#if defined(PXX)
        if (protocol == PROTO_PXX) {
          lcdDrawTextAtt(MODEL_SETUP_2ND_COLUMN+4*FW, y, STR_SYNCMENU, menuHorizontalPosition!=0 ? attr : 0);
          uint8_t newFlag = 0;
          if (attr && menuHorizontalPosition>0 && editMode>0) {
            // send reset code
            newFlag = MODULE_BIND;
          }
          moduleFlag[0] = newFlag;
        }
#endif
#if defined(DSM2)
        if (IS_DSM2_PROTOCOL(protocol)) {
          lcdDrawTextAtt(MODEL_SETUP_2ND_COLUMN+4*FW, y, STR_MODULE_RANGE, menuHorizontalPosition!=0 ? attr : 0);
          moduleFlag[0] = (attr && menuHorizontalPosition>0 && editMode>0) ? MODULE_RANGECHECK : 0; // [MENU] key toggles range check mode
        }
#endif
      }
#endif
      break;
    }
  }
Exemple #4
0
void menuModelSetup(uint8_t event)
{
  horzpos_t l_posHorz = menuHorizontalPosition;
  bool CURSOR_ON_CELL = (menuHorizontalPosition >= 0);
#if defined(TARANIS_INTERNAL_PPM)
  MENU_TAB({ 0, 0, TIMERS_ROWS, TOPLCD_ROWS 0, 1, 0, 0, LABEL(Throttle), 0, 0, 0, LABEL(PreflightCheck), 0, 0, SW_WARN_ITEMS(), POT_WARN_ITEMS(),
    NAVIGATION_LINE_BY_LINE|(NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1), 0, 
    LABEL(InternalModule), 
    INTERNAL_MODULE_MODE_ROWS, 
    INTERNAL_MODULE_CHANNELS_ROWS,
    IF_INTERNAL_MODULE_ON(IS_MODULE_XJT(INTERNAL_MODULE) ? (HAS_RF_PROTOCOL_MODELINDEX(g_model.moduleData[INTERNAL_MODULE].rfProtocol) ? (uint8_t)2 : (uint8_t)1) : (IS_MODULE_PPM(INTERNAL_MODULE) ? (uint8_t)1 : HIDDEN_ROW)),
    IF_INTERNAL_MODULE_ON((IS_MODULE_XJT(INTERNAL_MODULE)) ? FAILSAFE_ROWS(INTERNAL_MODULE) : HIDDEN_ROW), 
    LABEL(ExternalModule), 
    (IS_MODULE_XJT(EXTERNAL_MODULE) || IS_MODULE_DSM2(EXTERNAL_MODULE)) ? (uint8_t)1 : (uint8_t)0, 
    EXTERNAL_MODULE_CHANNELS_ROWS,
    (IS_MODULE_XJT(EXTERNAL_MODULE) && !HAS_RF_PROTOCOL_MODELINDEX(g_model.moduleData[EXTERNAL_MODULE].rfProtocol)) ? (uint8_t)1 : (IS_MODULE_PPM(EXTERNAL_MODULE) || IS_MODULE_XJT(EXTERNAL_MODULE) || IS_MODULE_DSM2(EXTERNAL_MODULE)) ? (uint8_t)2 : HIDDEN_ROW,
    IF_EXTERNAL_MODULE_XJT(FAILSAFE_ROWS(EXTERNAL_MODULE)), 
    LABEL(Trainer), 0, TRAINER_CHANNELS_ROWS(), IF_TRAINER_ON(2)});
#else
  MENU_TAB({ 0, 0, TIMERS_ROWS, TOPLCD_ROWS 0, 1, 0, 0, LABEL(Throttle), 0, 0, 0, LABEL(PreflightCheck), 0, 0, SW_WARN_ITEMS(), POT_WARN_ITEMS(),
    NAVIGATION_LINE_BY_LINE|(NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1), 0,
    LABEL(InternalModule),
    INTERNAL_MODULE_MODE_ROWS,
    INTERNAL_MODULE_CHANNELS_ROWS,
    IF_INTERNAL_MODULE_ON(HAS_RF_PROTOCOL_MODELINDEX(g_model.moduleData[INTERNAL_MODULE].rfProtocol) ? (uint8_t)2 : (uint8_t)1),
    IF_INTERNAL_MODULE_ON(FAILSAFE_ROWS(INTERNAL_MODULE)),
    LABEL(ExternalModule),
    EXTERNAL_MODULE_MODE_ROWS,
    EXTERNAL_MODULE_CHANNELS_ROWS,
    (IS_MODULE_XJT(EXTERNAL_MODULE) && !HAS_RF_PROTOCOL_MODELINDEX(g_model.moduleData[EXTERNAL_MODULE].rfProtocol)) ? (uint8_t)1 : (IS_MODULE_PPM(EXTERNAL_MODULE) || IS_MODULE_XJT(EXTERNAL_MODULE) || IS_MODULE_DSM2(EXTERNAL_MODULE)) ? (uint8_t)2 : HIDDEN_ROW,
    IF_EXTERNAL_MODULE_XJT(FAILSAFE_ROWS(EXTERNAL_MODULE)),
    LABEL(Trainer), 0, TRAINER_CHANNELS_ROWS(), IF_TRAINER_ON(2)});
#endif
  MENU_CHECK(STR_MENUSETUP, menuTabModel, e_ModelSetup, ITEM_MODEL_SETUP_MAX);

#if (defined(DSM2) || defined(PXX))
  if (menuEvent) {
    moduleFlag[0] = 0;
    moduleFlag[1] = 0;
  }
#endif

  int sub = menuVerticalPosition;

  for (int i=0; i<NUM_BODY_LINES; ++i) {
    coord_t y = MENU_HEADER_HEIGHT + 1 + i*FH;
    uint8_t k = i+menuVerticalOffset;
    for (int j=0; j<=k; j++) {
      if (mstate_tab[j] == HIDDEN_ROW)
        k++;
    }

    LcdFlags blink = ((s_editMode>0) ? BLINK|INVERS : INVERS);
    LcdFlags attr = (sub == k ? blink : 0);

    switch(k) {
      case ITEM_MODEL_NAME:
        editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_MODELNAME, g_model.header.name, sizeof(g_model.header.name), event, attr);
        memcpy(modelHeaders[g_eeGeneral.currModel].name, g_model.header.name, sizeof(g_model.header.name));
        break;

      case ITEM_MODEL_BITMAP:
        lcd_putsLeft(y, STR_BITMAP);
        if (ZEXIST(g_model.header.bitmap))
          lcd_putsnAtt(MODEL_SETUP_2ND_COLUMN, y, g_model.header.bitmap, sizeof(g_model.header.bitmap), attr);
        else
          lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VCSWFUNC, 0, attr);
        if (attr && event==EVT_KEY_BREAK(KEY_ENTER) && READ_ONLY_UNLOCKED()) {
          s_editMode = 0;
          if (listSdFiles(BITMAPS_PATH, BITMAPS_EXT, sizeof(g_model.header.bitmap), g_model.header.bitmap, LIST_NONE_SD_FILE)) {
            popupMenuHandler = onModelSetupBitmapMenu;
          }
          else {
            POPUP_WARNING(STR_NO_BITMAPS_ON_SD);
          }
        }
        break;

      case ITEM_MODEL_TIMER1:
        editTimerMode(0, y, attr, event);
        break;

      case ITEM_MODEL_TIMER1_NAME:
        editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_TIMER_NAME, g_model.timers[0].name, LEN_TIMER_NAME, event, attr);
        break;

      case ITEM_MODEL_TIMER1_MINUTE_BEEP:
        g_model.timers[0].minuteBeep = onoffMenuItem(g_model.timers[0].minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
        break;

      case ITEM_MODEL_TIMER1_COUNTDOWN_BEEP:
        g_model.timers[0].countdownBeep = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, STR_VBEEPCOUNTDOWN, g_model.timers[0].countdownBeep, COUNTDOWN_SILENT, COUNTDOWN_COUNT-1, attr, event);
        break;

      case ITEM_MODEL_TIMER1_PERSISTENT:
        g_model.timers[0].persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, g_model.timers[0].persistent, 0, 2, attr, event);
        break;

#if TIMERS > 1
      case ITEM_MODEL_TIMER2:
        editTimerMode(1, y, attr, event);
        break;

      case ITEM_MODEL_TIMER2_NAME:
        editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_TIMER_NAME, g_model.timers[1].name, LEN_TIMER_NAME, event, attr);
        break;

      case ITEM_MODEL_TIMER2_MINUTE_BEEP:
        g_model.timers[1].minuteBeep = onoffMenuItem(g_model.timers[1].minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
        break;

      case ITEM_MODEL_TIMER2_COUNTDOWN_BEEP:
        g_model.timers[1].countdownBeep = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, STR_VBEEPCOUNTDOWN, g_model.timers[1].countdownBeep, COUNTDOWN_SILENT, COUNTDOWN_COUNT-1, attr, event);
        break;

      case ITEM_MODEL_TIMER2_PERSISTENT:
        g_model.timers[1].persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, g_model.timers[1].persistent, 0, 2, attr, event);
        break;
#endif

#if TIMERS > 2
      case ITEM_MODEL_TIMER3:
        editTimerMode(2, y, attr, event);
        break;

      case ITEM_MODEL_TIMER3_NAME:
        editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_TIMER_NAME, g_model.timers[2].name, LEN_TIMER_NAME, event, attr);
        break;

      case ITEM_MODEL_TIMER3_MINUTE_BEEP:
        g_model.timers[2].minuteBeep = onoffMenuItem(g_model.timers[2].minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
        break;

      case ITEM_MODEL_TIMER3_COUNTDOWN_BEEP:
        g_model.timers[2].countdownBeep = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, STR_VBEEPCOUNTDOWN, g_model.timers[2].countdownBeep, COUNTDOWN_SILENT, COUNTDOWN_COUNT-1, attr, event);
        break;

      case ITEM_MODEL_TIMER3_PERSISTENT:
        g_model.timers[2].persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, g_model.timers[2].persistent, 0, 2, attr, event);
        break;
#endif

#if defined(REV9E)
      case ITEM_MODEL_TOP_LCD_TIMER:
        lcd_putsLeft(y, STR_TOPLCDTIMER);
        putsStrIdx(MODEL_SETUP_2ND_COLUMN, y, STR_TIMER, g_model.topLcdTimer+1, attr);
        if (attr) {
          g_model.topLcdTimer = checkIncDec(event, g_model.topLcdTimer, 0, TIMERS-1, EE_MODEL);
        }
        break;
#endif

      case ITEM_MODEL_EXTENDED_LIMITS:
        ON_OFF_MENU_ITEM(g_model.extendedLimits, MODEL_SETUP_2ND_COLUMN, y, STR_ELIMITS, attr, event);
        break;

      case ITEM_MODEL_EXTENDED_TRIMS:
        ON_OFF_MENU_ITEM(g_model.extendedTrims, MODEL_SETUP_2ND_COLUMN, y, STR_ETRIMS, menuHorizontalPosition<=0 ? attr : 0, event==EVT_KEY_BREAK(KEY_ENTER) ? event : 0);
        lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_RESET_BTN, (menuHorizontalPosition>0  && !NO_HIGHLIGHT()) ? attr : 0);
        if (attr && menuHorizontalPosition>0) {
          s_editMode = 0;
          if (event==EVT_KEY_LONG(KEY_ENTER)) {
            START_NO_HIGHLIGHT();
            for (uint8_t i=0; i<MAX_FLIGHT_MODES; i++) {
              memclear(&g_model.flightModeData[i], TRIMS_ARRAY_SIZE);
            }
            eeDirty(EE_MODEL);
            AUDIO_WARNING1();
          }
        }
        break;

      case ITEM_MODEL_DISPLAY_TRIMS:
        g_model.displayTrims = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_DISPLAY_TRIMS, STR_VDISPLAYTRIMS, g_model.displayTrims, 0, 2, attr, event);
        break;

      case ITEM_MODEL_TRIM_INC:
        g_model.trimInc = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_TRIMINC, STR_VTRIMINC, g_model.trimInc, -2, 2, attr, event);
        break;

      case ITEM_MODEL_THROTTLE_LABEL:
        lcd_putsLeft(y, STR_THROTTLE_LABEL);
        break;

      case ITEM_MODEL_THROTTLE_REVERSED:
        ON_OFF_MENU_ITEM(g_model.throttleReversed, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEREVERSE, attr, event ) ;
        break;

      case ITEM_MODEL_THROTTLE_TRACE:
      {
        lcd_putsLeft(y, STR_TTRACE);
        if (attr) CHECK_INCDEC_MODELVAR_ZERO_CHECK(event, g_model.thrTraceSrc, NUM_POTS+NUM_CHNOUT, isThrottleSourceAvailable);
        uint8_t idx = g_model.thrTraceSrc + MIXSRC_Thr;
        if (idx > MIXSRC_Thr)
          idx += 1;
        if (idx >= MIXSRC_FIRST_POT+NUM_POTS)
          idx += MIXSRC_CH1 - MIXSRC_FIRST_POT - NUM_POTS;
        putsMixerSource(MODEL_SETUP_2ND_COLUMN, y, idx, attr);
        break;
      }

      case ITEM_MODEL_THROTTLE_TRIM:
        ON_OFF_MENU_ITEM(g_model.thrTrim, MODEL_SETUP_2ND_COLUMN, y, STR_TTRIM, attr, event);
        break;

      case ITEM_MODEL_PREFLIGHT_LABEL:
        lcd_putsLeft(y, STR_PREFLIGHT);
        break;

      case ITEM_MODEL_CHECKLIST_DISPLAY:
        ON_OFF_MENU_ITEM(g_model.displayChecklist, MODEL_SETUP_2ND_COLUMN, y, STR_CHECKLIST, attr, event);
        break;

      case ITEM_MODEL_THROTTLE_WARNING:
        g_model.disableThrottleWarning = !onoffMenuItem(!g_model.disableThrottleWarning, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEWARNING, attr, event);
        break;

#if defined(REV9E)
      case ITEM_MODEL_SWITCHES_WARNING2:
      case ITEM_MODEL_SWITCHES_WARNING3:
      case ITEM_MODEL_POTS_WARNING2:
        if (i==0) {
          if (CURSOR_MOVED_LEFT(event))
            menuVerticalOffset--;
          else
            menuVerticalOffset++;
        }
        break;
#endif

      case ITEM_MODEL_SWITCHES_WARNING:
      {
#if defined(REV9E)
        if (i>=NUM_BODY_LINES-2 && getSwitchWarningsCount() > 8*(NUM_BODY_LINES-i)) {
          if (CURSOR_MOVED_LEFT(event))
            menuVerticalOffset--;
          else
            menuVerticalOffset++;
          break;
        }
#endif
        lcd_putsLeft(y, STR_SWITCHWARNING);
        swarnstate_t states = g_model.switchWarningState;
        char c;
        if (attr) {
          s_editMode = 0;
          if (!READ_ONLY()) {
            switch (event) {
              CASE_EVT_ROTARY_BREAK
              case EVT_KEY_BREAK(KEY_ENTER):
                break;

              case EVT_KEY_LONG(KEY_ENTER):
                if (menuHorizontalPosition < 0) {
                  START_NO_HIGHLIGHT();
                  getMovedSwitch();
                  g_model.switchWarningState = switches_states;
                  AUDIO_WARNING1();
                  eeDirty(EE_MODEL);
                }
                killEvents(event);
                break;
            }
          }
        }

        LcdFlags line = attr;

        int current = 0;
        for (int i=0; i<NUM_SWITCHES; i++) {
          if (SWITCH_WARNING_ALLOWED(i)) {
            div_t qr = div(current, 8);
            if (!READ_ONLY() && event==EVT_KEY_BREAK(KEY_ENTER) && line && l_posHorz==current) {
              g_model.switchWarningEnable ^= (1 << i);
              eeDirty(EE_MODEL);
            }
            uint8_t swactive = !(g_model.switchWarningEnable & (1<<i));
            c = "\300-\301"[states & 0x03];
            lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+qr.rem*(2*FW+1), y+FH*qr.quot, 'A'+i, line && (menuHorizontalPosition==current) ? INVERS : 0);
            if (swactive) lcd_putc(lcdNextPos, y+FH*qr.quot, c);
            ++current;
          }
          states >>= 2;
        }
        if (attr && menuHorizontalPosition < 0) {
#if defined(REV9E)
          drawFilledRect(MODEL_SETUP_2ND_COLUMN-1, y-1, 8*(2*FW+1), 1+FH*((current+7)/8));
#else
          drawFilledRect(MODEL_SETUP_2ND_COLUMN-1, y-1, current*(2*FW+1), FH+1);
#endif
        }
        break;
      }

      case ITEM_MODEL_POTS_WARNING:
#if defined(REV9E)
        if (i==NUM_BODY_LINES-1 && g_model.potsWarnMode) {
          if (CURSOR_MOVED_LEFT(event))
            menuVerticalOffset--;
          else
            menuVerticalOffset++;
          break;
        }
#endif

        lcd_putsLeft(y, STR_POTWARNING);
        lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, PSTR("\004""OFF\0""Man\0""Auto"), g_model.potsWarnMode, (menuHorizontalPosition == 0) ? attr : 0);
        if (attr && (menuHorizontalPosition == 0)) {
          CHECK_INCDEC_MODELVAR(event, g_model.potsWarnMode, POTS_WARN_OFF, POTS_WARN_AUTO);
          eeDirty(EE_MODEL);
        }

        if (attr) {
          if (menuHorizontalPosition > 0) s_editMode = 0;
          if (!READ_ONLY() && menuHorizontalPosition > 0) {
            switch (event) {
              case EVT_KEY_LONG(KEY_ENTER):
                killEvents(event);
                if (g_model.potsWarnMode == POTS_WARN_MANUAL) {
                  SAVE_POT_POSITION(menuHorizontalPosition-1);
                  AUDIO_WARNING1();
                  eeDirty(EE_MODEL);
                }
                break;
              case EVT_KEY_BREAK(KEY_ENTER):
                g_model.potsWarnEnabled ^= (1 << (menuHorizontalPosition-1));
                eeDirty(EE_MODEL);
                break;
            }
          }
        }
        if (g_model.potsWarnMode) {
          coord_t x = MODEL_SETUP_2ND_COLUMN+28;
          for (int i=0; i<NUM_POTS; ++i) {
            if (i<NUM_XPOTS && !IS_POT_AVAILABLE(POT1+i)) {
              if (attr && (menuHorizontalPosition==i+1)) REPEAT_LAST_CURSOR_MOVE();
            }
            else {
#if defined(REV9E)
              if (i == NUM_XPOTS) {
                y += FH;
                x = MODEL_SETUP_2ND_COLUMN;
              }
#endif
              LcdFlags flags = ((menuHorizontalPosition==i+1) && attr) ? BLINK : 0;
              if ((!attr || menuHorizontalPosition >= 0) && !(g_model.potsWarnEnabled & (1 << i))) {
                flags |= INVERS;
              }

              // TODO add a new function
              lcd_putsnAtt(x, y, STR_VSRCRAW+2+STR_VSRCRAW[0]*(NUM_STICKS+1+i), STR_VSRCRAW[0]-1, flags & ~ZCHAR);
              x = lcdNextPos+3;
            }
          }
        }
        if (attr && menuHorizontalPosition < 0) {
#if defined(REV9E)
          drawFilledRect(MODEL_SETUP_2ND_COLUMN-1, y-FH-1, LCD_W-MODEL_SETUP_2ND_COLUMN-MENUS_SCROLLBAR_WIDTH+1, 2*FH+1);
#else
          drawFilledRect(MODEL_SETUP_2ND_COLUMN-1, y-1, LCD_W-MODEL_SETUP_2ND_COLUMN-MENUS_SCROLLBAR_WIDTH+1, FH+1);
#endif
        }
        break;

      case ITEM_MODEL_BEEP_CENTER:
      {
        lcd_putsLeft(y, STR_BEEPCTR);
        coord_t x = MODEL_SETUP_2ND_COLUMN;
        for (int i=0; i<NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS; i++) {
          if (i>=POT1 && i<POT1+NUM_XPOTS && !IS_POT_AVAILABLE(i)) {
            if (attr && menuHorizontalPosition == i) REPEAT_LAST_CURSOR_MOVE();
            continue;
          }
          lcd_putsiAtt(x, y, STR_RETA123, i, ((menuHorizontalPosition==i) && attr) ? BLINK|INVERS : (((g_model.beepANACenter & ((BeepANACenter)1<<i)) || (attr && CURSOR_ON_LINE())) ? INVERS : 0 ) );
          x += FW;
        }
        if (attr && CURSOR_ON_CELL) {
          if (event==EVT_KEY_BREAK(KEY_ENTER)) {
            if (READ_ONLY_UNLOCKED()) {
              s_editMode = 0;
              g_model.beepANACenter ^= ((BeepANACenter)1<<menuHorizontalPosition);
              eeDirty(EE_MODEL);
            }
          }
        }
        break;
      }

      case ITEM_MODEL_USE_GLOBAL_FUNCTIONS:
        lcd_putsLeft(y, STR_USE_GLOBAL_FUNCS);
        menu_lcd_onoff(MODEL_SETUP_2ND_COLUMN, y, !g_model.noGlobalFunctions, attr);
        if (attr) g_model.noGlobalFunctions = !checkIncDecModel(event, !g_model.noGlobalFunctions, 0, 1);
        break;

      case ITEM_MODEL_INTERNAL_MODULE_LABEL:
        lcd_putsLeft(y, TR_INTERNALRF);
        break;
#if defined(TARANIS_INTERNAL_PPM)
      case ITEM_MODEL_INTERNAL_MODULE_MODE:
        lcd_putsLeft(y, STR_MODE);
        lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_TARANIS_PROTOCOLS, g_model.moduleData[INTERNAL_MODULE].type, menuHorizontalPosition==0 ? attr : 0);
        if (IS_MODULE_XJT(INTERNAL_MODULE)) 
          lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+5*FW, y, STR_XJT_PROTOCOLS, 1+g_model.moduleData[INTERNAL_MODULE].rfProtocol, menuHorizontalPosition==1 ? attr : 0);
        if (attr && s_editMode>0) {
          switch (menuHorizontalPosition) {
            case 0:
              g_model.moduleData[INTERNAL_MODULE].type = checkIncDec(event, g_model.moduleData[INTERNAL_MODULE].type, MODULE_TYPE_NONE, MODULE_TYPE_COUNT-2, EE_MODEL, isModuleAvailable);
              if (checkIncDec_Ret) {
                 g_model.moduleData[INTERNAL_MODULE].rfProtocol = 0;
                 g_model.moduleData[INTERNAL_MODULE].channelsStart = 0;
                 g_model.moduleData[INTERNAL_MODULE].channelsCount = 0;
              }
              break;
            case 1:              
              g_model.moduleData[INTERNAL_MODULE].rfProtocol = checkIncDec(event, g_model.moduleData[INTERNAL_MODULE].rfProtocol, RF_PROTO_X16, RF_PROTO_LAST, EE_MODEL, isRfProtocolAvailable);
              if (checkIncDec_Ret) {
                g_model.moduleData[INTERNAL_MODULE].channelsStart = 0;
                g_model.moduleData[INTERNAL_MODULE].channelsCount = 0;
              }
            }
          }
        break;
#else
      case ITEM_MODEL_INTERNAL_MODULE_MODE:
        lcd_putsLeft(y, STR_MODE);
        lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_XJT_PROTOCOLS, 1+g_model.moduleData[0].rfProtocol, attr);
        if (attr) {
          g_model.moduleData[INTERNAL_MODULE].rfProtocol = checkIncDec(event, g_model.moduleData[INTERNAL_MODULE].rfProtocol, RF_PROTO_OFF, RF_PROTO_LAST, EE_MODEL, isRfProtocolAvailable);
          if (checkIncDec_Ret) {
            g_model.moduleData[0].type = MODULE_TYPE_XJT;
            g_model.moduleData[0].channelsStart = 0;
            g_model.moduleData[0].channelsCount = 0;
          }
        }
        break;
#endif
      case ITEM_MODEL_TRAINER_MODE:
        g_model.trainerMode = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_MODE, STR_VTRAINERMODES, g_model.trainerMode, 0, HAS_WIRELESS_TRAINER_HARDWARE() ? TRAINER_MODE_MASTER_BATTERY_COMPARTMENT : TRAINER_MODE_MASTER_CPPM_EXTERNAL_MODULE, attr, event);
        break;

      case ITEM_MODEL_EXTERNAL_MODULE_LABEL:
        lcd_putsLeft(y, TR_EXTERNALRF);
        break;

      case ITEM_MODEL_EXTERNAL_MODULE_MODE:
        lcd_putsLeft(y, STR_MODE);
        lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_TARANIS_PROTOCOLS, g_model.moduleData[EXTERNAL_MODULE].type, menuHorizontalPosition==0 ? attr : 0);
        if (IS_MODULE_XJT(EXTERNAL_MODULE))
          lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+5*FW, y, STR_XJT_PROTOCOLS, 1+g_model.moduleData[EXTERNAL_MODULE].rfProtocol, menuHorizontalPosition==1 ? attr : 0);
        else if (IS_MODULE_DSM2(EXTERNAL_MODULE))
          lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+5*FW, y, STR_DSM_PROTOCOLS, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, menuHorizontalPosition==1 ? attr : 0);
        if (attr && s_editMode>0) {
          switch (menuHorizontalPosition) {
            case 0:
              g_model.moduleData[EXTERNAL_MODULE].type = checkIncDec(event, g_model.moduleData[EXTERNAL_MODULE].type, MODULE_TYPE_NONE, MODULE_TYPE_COUNT-1, EE_MODEL, isModuleAvailable);
              if (checkIncDec_Ret) {
                g_model.moduleData[EXTERNAL_MODULE].rfProtocol = 0;
                g_model.moduleData[EXTERNAL_MODULE].channelsStart = 0;
                g_model.moduleData[EXTERNAL_MODULE].channelsCount = 0;
              }
              break;
            case 1:
              if (IS_MODULE_DSM2(EXTERNAL_MODULE))
                CHECK_INCDEC_MODELVAR(event, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, DSM2_PROTO_LP45, DSM2_PROTO_DSMX);
              else
                g_model.moduleData[EXTERNAL_MODULE].rfProtocol = checkIncDec(event, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, RF_PROTO_X16, RF_PROTO_LAST, EE_MODEL, isRfProtocolAvailable);
              if (checkIncDec_Ret) {
                g_model.moduleData[EXTERNAL_MODULE].channelsStart = 0;
                g_model.moduleData[EXTERNAL_MODULE].channelsCount = 0;
              }
          }
        }
        break;

      case ITEM_MODEL_TRAINER_LABEL:
        lcd_putsLeft(y, STR_TRAINER);
        break;

      case ITEM_MODEL_INTERNAL_MODULE_CHANNELS:
      case ITEM_MODEL_EXTERNAL_MODULE_CHANNELS:
      case ITEM_MODEL_TRAINER_CHANNELS:
      {
        uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
        ModuleData & moduleData = g_model.moduleData[moduleIdx];
        lcd_putsLeft(y, STR_CHANNELRANGE);
        if ((int8_t)PORT_CHANNELS_ROWS(moduleIdx) >= 0) {
          lcd_putsAtt(MODEL_SETUP_2ND_COLUMN, y, STR_CH, menuHorizontalPosition==0 ? attr : 0);
          lcd_outdezAtt(lcdLastPos, y, moduleData.channelsStart+1, LEFT | (menuHorizontalPosition==0 ? attr : 0));
          lcd_putc(lcdLastPos, y, '-');
          lcd_outdezAtt(lcdLastPos + FW+1, y, moduleData.channelsStart+NUM_CHANNELS(moduleIdx), LEFT | (menuHorizontalPosition==1 ? attr : 0));
          if (attr && s_editMode>0) {
            switch (menuHorizontalPosition) {
              case 0:
                CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.channelsStart, 32-8-moduleData.channelsCount);
                break;
              case 1:
                CHECK_INCDEC_MODELVAR(event, moduleData.channelsCount, -4, min<int8_t>(MAX_CHANNELS(moduleIdx), 32-8-moduleData.channelsStart));
                
#if defined(TARANIS_INTERNAL_PPM)
                if ((k == ITEM_MODEL_EXTERNAL_MODULE_CHANNELS && g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_PPM) || (k == ITEM_MODEL_INTERNAL_MODULE_CHANNELS && g_model.moduleData[INTERNAL_MODULE].type == MODULE_TYPE_PPM) || (k == ITEM_MODEL_TRAINER_CHANNELS)) {
                  SET_DEFAULT_PPM_FRAME_LENGTH(moduleIdx);
                }
#else
                if ((k == ITEM_MODEL_EXTERNAL_MODULE_CHANNELS && g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_PPM) || (k == ITEM_MODEL_TRAINER_CHANNELS)) {
                  SET_DEFAULT_PPM_FRAME_LENGTH(moduleIdx);
                }
#endif
                break;
            }
          }
        }
        break;
      }

      case ITEM_MODEL_INTERNAL_MODULE_BIND:
      case ITEM_MODEL_EXTERNAL_MODULE_BIND:
      case ITEM_MODEL_TRAINER_SETTINGS:
      {
        uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
        ModuleData & moduleData = g_model.moduleData[moduleIdx];
        if (IS_MODULE_PPM(moduleIdx)) {
          lcd_putsLeft(y, STR_PPMFRAME);
          lcd_puts(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
          lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN, y, (int16_t)moduleData.ppmFrameLength*5 + 225, (menuHorizontalPosition<=0 ? attr : 0) | PREC1|LEFT);
          lcd_putc(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
          lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (moduleData.ppmDelay*50)+300, (CURSOR_ON_LINE() || menuHorizontalPosition==1) ? attr : 0);
          lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, moduleData.ppmPulsePol ? '+' : '-', (CURSOR_ON_LINE() || menuHorizontalPosition==2) ? attr : 0);

          if (attr && s_editMode>0) {
            switch (menuHorizontalPosition) {
              case 0:
                CHECK_INCDEC_MODELVAR(event, moduleData.ppmFrameLength, -20, 35);
                break;
              case 1:
                CHECK_INCDEC_MODELVAR(event, moduleData.ppmDelay, -4, 10);
                break;
              case 2:
                CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.ppmPulsePol, 1);
                break;
            }
          }
        }
        else {
          horzpos_t l_posHorz = menuHorizontalPosition;
          coord_t xOffsetBind = MODEL_SETUP_BIND_OFS;
          if (IS_MODULE_XJT(moduleIdx) && g_model.moduleData[moduleIdx].rfProtocol == RF_PROTO_D8) {
            xOffsetBind = 0;
            lcd_putsLeft(y, INDENT "Receiver");
            if (attr) l_posHorz += 1;
          }
          else {
            lcd_putsLeft(y, STR_RXNUM);
          }
          if (IS_MODULE_XJT(moduleIdx) || IS_MODULE_DSM2(moduleIdx)) {
            if (xOffsetBind) lcd_outdezNAtt(MODEL_SETUP_2ND_COLUMN, y, g_model.header.modelId[moduleIdx], (l_posHorz==0 ? attr : 0) | LEADING0|LEFT, 2);
            if (attr && l_posHorz==0) {
              if (s_editMode>0) {
                CHECK_INCDEC_MODELVAR_ZERO(event, g_model.header.modelId[moduleIdx], IS_MODULE_DSM2(moduleIdx) ? 20 : 63);
                if (checkIncDec_Ret) {
                  modelHeaders[g_eeGeneral.currModel].modelId[moduleIdx] = g_model.header.modelId[moduleIdx];
                }
              }
              if (s_editMode==0 && event==EVT_KEY_BREAK(KEY_ENTER)) {
                checkModelIdUnique(g_eeGeneral.currModel, moduleIdx);
              }
            }
            lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+xOffsetBind, y, STR_MODULE_BIND, l_posHorz==1 ? attr : 0);
            lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+MODEL_SETUP_RANGE_OFS+xOffsetBind, y, STR_MODULE_RANGE, l_posHorz==2 ? attr : 0);
            uint8_t newFlag = 0;
            if (attr && l_posHorz>0 && s_editMode>0) {
              if (l_posHorz == 1)
                newFlag = MODULE_BIND;
              else if (l_posHorz == 2) {
                newFlag = MODULE_RANGECHECK;
              }
            }
            moduleFlag[moduleIdx] = newFlag;
          }
        }
        break;
      }

      case ITEM_MODEL_INTERNAL_MODULE_FAILSAFE:
      case ITEM_MODEL_EXTERNAL_MODULE_FAILSAFE:
      {
        uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
        ModuleData & moduleData = g_model.moduleData[moduleIdx];
        lcd_putsLeft(y, TR_FAILSAFE);
        if (IS_MODULE_XJT(moduleIdx)) {
          lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VFAILSAFE, moduleData.failsafeMode, menuHorizontalPosition==0 ? attr : 0);
          if (moduleData.failsafeMode == FAILSAFE_CUSTOM) lcd_putsAtt(MODEL_SETUP_2ND_COLUMN + MODEL_SETUP_SET_FAILSAFE_OFS, y, STR_SET, menuHorizontalPosition==1 ? attr : 0);
          if (attr) {
            if (moduleData.failsafeMode != FAILSAFE_CUSTOM) {
              menuHorizontalPosition = 0;
            }
            if (menuHorizontalPosition == 0) {
              if (s_editMode > 0) {
                CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.failsafeMode, FAILSAFE_LAST);
                if (checkIncDec_Ret) SEND_FAILSAFE_NOW(moduleIdx);
              }
            }
            else if (menuHorizontalPosition == 1) {
              s_editMode = 0;
              if (moduleData.failsafeMode==FAILSAFE_CUSTOM && event==EVT_KEY_FIRST(KEY_ENTER)) {
                g_moduleIdx = moduleIdx;
                pushMenu(menuModelFailsafe);
              }
            }
            else {
              drawFilledRect(MODEL_SETUP_2ND_COLUMN, y, LCD_W-MODEL_SETUP_2ND_COLUMN-MENUS_SCROLLBAR_WIDTH, 8);
            }
          }
        }
        break;
      }
    }
  }

#if defined(PXX)
  if (IS_RANGECHECK_ENABLE()) {
    displayPopup("RSSI: ");
    lcd_outdezAtt(16+4*FW, 5*FH, TELEMETRY_RSSI(), BOLD);
  }
#endif
}
void menuModelMixOne(uint8_t event)
{
  if (event == EVT_KEY_LONG(KEY_MENU)) {
    pushMenu(menuChannelsView);
    killEvents(event);
  }

  TITLE(s_currCh ? STR_INSERTMIX : STR_EDITMIX);
  MixData *md2 = mixAddress(s_currIdx) ;
  putsChn(lcdLastPos+1*FW, 0, md2->destCh+1,0);

  SUBMENU_NOTITLE(MIX_FIELD_COUNT, {0, 0, 0, 0, 0, CASE_CURVES(1) CASE_FLIGHT_MODES((MAX_FLIGHT_MODES-1) | NAVIGATION_LINE_BY_LINE) 0, 0 /*, ...*/});

#if MENU_COLUMNS > 1
  lcd_vline(MENU_COLUMN2_X-4, FH+1, LCD_H-FH-1);
  SET_SCROLLBAR_X(0);
#endif

  int8_t sub = m_posVert;
  int8_t editMode = s_editMode;

  for (int k=0; k<MENU_COLUMNS*(LCD_LINES-1); k++) {
    coord_t y;
    coord_t COLUMN_X;
    if (k >= LCD_LINES-1) {
      y = 1 + (k-LCD_LINES+2)*FH;
      COLUMN_X = MENU_COLUMN2_X;
    }
    else {
      y = 1 + (k+1)*FH;
      COLUMN_X = 0;
    }
    int8_t i = k;
    
#if MENU_COLUMNS < 2
    i = i + s_pgOfs;
#endif

    LcdFlags attr = (sub==i ? (editMode>0 ? BLINK|INVERS : INVERS) : 0);
    switch(i) {
      case MIX_FIELD_NAME:
        editSingleName(COLUMN_X+MIXES_2ND_COLUMN, y, STR_MIXNAME, md2->name, sizeof(md2->name), event, attr);
        break;
      case MIX_FIELD_SOURCE:
        lcd_putsColumnLeft(COLUMN_X, y, NO_INDENT(STR_SOURCE));
        putsMixerSource(COLUMN_X+MIXES_2ND_COLUMN, y, md2->srcRaw, STREXPANDED|attr);
        if (attr) CHECK_INCDEC_MODELSOURCE(event, md2->srcRaw, 1, MIXSRC_LAST);
        break;
      case MIX_FIELD_WEIGHT:
        lcd_putsColumnLeft(COLUMN_X, y, STR_WEIGHT);
        gvarWeightItem(COLUMN_X+MIXES_2ND_COLUMN, y, md2, attr|LEFT, event);
        break;
      case MIX_FIELD_OFFSET:
      {
        lcd_putsColumnLeft(COLUMN_X, y, NO_INDENT(STR_OFFSET));
        u_int8int16_t offset;
        MD_OFFSET_TO_UNION(md2, offset);
        offset.word = GVAR_MENU_ITEM(COLUMN_X+MIXES_2ND_COLUMN, y, offset.word, GV_RANGELARGE_OFFSET_NEG, GV_RANGELARGE_OFFSET, attr|LEFT, 0, event);
        MD_UNION_TO_OFFSET(offset, md2);
        drawOffsetBar(COLUMN_X+MIXES_2ND_COLUMN+22, y, md2);
        break;
      }

      case MIX_FIELD_TRIM:
        lcd_putsColumnLeft(COLUMN_X, y, STR_TRIM);
        menu_lcd_onoff(COLUMN_X+MIXES_2ND_COLUMN, y, !md2->carryTrim, attr);
        if (attr) md2->carryTrim = !checkIncDecModel(event, !md2->carryTrim, 0, 1);
        break;

#if defined(CURVES)
      case MIX_FIELD_CURVE:
      {
        lcd_putsColumnLeft(COLUMN_X, y, STR_CURVE);
        editCurveRef(COLUMN_X+MIXES_2ND_COLUMN, y, md2->curve, event, attr);
        break;
      }
#endif
#if defined(FLIGHT_MODES)
      case MIX_FIELD_FLIGHT_PHASE:
        md2->flightModes = editFlightModes(COLUMN_X+MIXES_2ND_COLUMN, y, event, md2->flightModes, attr);
        break;
#endif
      case MIX_FIELD_SWITCH:
        md2->swtch = switchMenuItem(COLUMN_X+MIXES_2ND_COLUMN, y, md2->swtch, attr, event);
        break;
      case MIX_FIELD_WARNING:
        lcd_putsColumnLeft(COLUMN_X+MIXES_2ND_COLUMN, y, STR_MIXWARNING);
        if (md2->mixWarn)
          lcd_outdezAtt(COLUMN_X+MIXES_2ND_COLUMN, y, md2->mixWarn, attr|LEFT);
        else
          lcd_putsAtt(COLUMN_X+MIXES_2ND_COLUMN, y, STR_OFF, attr);
        if (attr) CHECK_INCDEC_MODELVAR_ZERO(event, md2->mixWarn, 3);
        break;
      case MIX_FIELD_MLTPX:
        md2->mltpx = selectMenuItem(COLUMN_X+MIXES_2ND_COLUMN, y, STR_MULTPX, STR_VMLTPX, md2->mltpx, 0, 2, attr, event);
        break;
      case MIX_FIELD_DELAY_UP:
        md2->delayUp = EDIT_DELAY(COLUMN_X, y, event, attr, STR_DELAYUP, md2->delayUp);
        break;
      case MIX_FIELD_DELAY_DOWN:
        md2->delayDown = EDIT_DELAY(COLUMN_X, y, event, attr, STR_DELAYDOWN, md2->delayDown);
        break;
      case MIX_FIELD_SLOW_UP:
        md2->speedUp = EDIT_DELAY(COLUMN_X, y, event, attr, STR_SLOWUP, md2->speedUp);
        break;
      case MIX_FIELD_SLOW_DOWN:
        md2->speedDown = EDIT_DELAY(COLUMN_X, y, event, attr, STR_SLOWDOWN, md2->speedDown);
        break;
    }
  }
}
void menuModelExpoOne(uint8_t event)
{
  if (event == EVT_KEY_LONG(KEY_MENU)) {
    pushMenu(menuChannelsView);
    killEvents(event);
  }

  ExpoData *ed = expoAddress(s_currIdx);
  putsMixerSource(7*FW+FW/2, 0, MIXSRC_FIRST_INPUT+ed->chn, 0);

  SUBMENU(STR_MENUINPUTS, EXPO_FIELD_MAX, {0, 0, 0, ed->srcRaw >= MIXSRC_FIRST_TELEM ? (uint8_t)0 : (uint8_t)HIDDEN_ROW, 0, 0, CASE_CURVES(CURVE_ROWS) CASE_FLIGHT_MODES((MAX_FLIGHT_MODES-1) | NAVIGATION_LINE_BY_LINE) 0 /*, ...*/});

  SET_SCROLLBAR_X(EXPO_ONE_2ND_COLUMN+10*FW);

  int8_t sub = m_posVert;

  coord_t y = MENU_HEADER_HEIGHT + 1;

  for (unsigned int k=0; k<NUM_BODY_LINES; k++) {
    int i = k + s_pgOfs;
    for (int j=0; j<=i; ++j) {
      if (j<(int)DIM(mstate_tab) && mstate_tab[j] == HIDDEN_ROW) {
        ++i;
      }
    }
    LcdFlags attr = (sub==i ? (s_editMode>0 ? BLINK|INVERS : INVERS) : 0);
    switch(i)
    {
      case EXPO_FIELD_INPUT_NAME:
        editSingleName(EXPO_ONE_2ND_COLUMN, y, STR_INPUTNAME, g_model.inputNames[ed->chn], sizeof(g_model.inputNames[ed->chn]), event, attr);
        break;

      case EXPO_FIELD_NAME:
        editSingleName(EXPO_ONE_2ND_COLUMN, y, STR_EXPONAME, ed->name, sizeof(ed->name), event, attr);
        break;

      case EXPO_FIELD_SOURCE:
        lcd_putsLeft(y, NO_INDENT(STR_SOURCE));
        putsMixerSource(EXPO_ONE_2ND_COLUMN, y, ed->srcRaw, STREXPANDED|attr);
        if (attr) ed->srcRaw = checkIncDec(event, ed->srcRaw, INPUTSRC_FIRST, INPUTSRC_LAST, EE_MODEL|INCDEC_SOURCE|NO_INCDEC_MARKS, isInputSourceAvailable);
        break;

      case EXPO_FIELD_SCALE:
        lcd_putsLeft(y, STR_SCALE);
        putsTelemetryChannelValue(EXPO_ONE_2ND_COLUMN, y, (ed->srcRaw - MIXSRC_FIRST_TELEM)/3, convertTelemValue(ed->srcRaw - MIXSRC_FIRST_TELEM + 1, ed->scale), LEFT|attr);
        if (attr) ed->scale = checkIncDec(event, ed->scale, 0, maxTelemValue(ed->srcRaw - MIXSRC_FIRST_TELEM + 1), EE_MODEL);
        break;

      case EXPO_FIELD_WEIGHT:
        lcd_putsLeft(y, STR_WEIGHT);
        ed->weight = GVAR_MENU_ITEM(EXPO_ONE_2ND_COLUMN, y, ed->weight, MIN_EXPO_WEIGHT, 100, LEFT|attr, 0, event);
        break;

      case EXPO_FIELD_OFFSET:
        lcd_putsLeft(y, NO_INDENT(STR_OFFSET));
        ed->offset = GVAR_MENU_ITEM(EXPO_ONE_2ND_COLUMN, y, ed->offset, -100, 100, LEFT|attr, 0, event);
        break;

#if defined(CURVES)
      case EXPO_FIELD_CURVE:
        lcd_putsLeft(y, STR_CURVE);
        editCurveRef(EXPO_ONE_2ND_COLUMN, y, ed->curve, event, attr);
        break;
#endif

#if defined(FLIGHT_MODES)
      case EXPO_FIELD_FLIGHT_MODES:
        ed->flightModes = editFlightModes(EXPO_ONE_2ND_COLUMN, y, event, ed->flightModes, attr);
        break;
#endif

      case EXPO_FIELD_SWITCH:
        ed->swtch = switchMenuItem(EXPO_ONE_2ND_COLUMN, y, ed->swtch, attr, event);
        break;

      case EXPO_FIELD_SIDE:
        ed->mode = 4 - selectMenuItem(EXPO_ONE_2ND_COLUMN, y, STR_SIDE, STR_VSIDE, 4-ed->mode, 1, 3, attr, event);
        break;

      case EXPO_FIELD_TRIM:
        uint8_t not_stick = (ed->srcRaw > MIXSRC_Ail);
        int8_t carryTrim = -ed->carryTrim;
        lcd_putsLeft(y, STR_TRIM);
        lcd_putsiAtt(EXPO_ONE_2ND_COLUMN, y, STR_VMIXTRIMS, (not_stick && carryTrim == 0) ? 0 : carryTrim+1, m_posHorz==0 ? attr : 0);
        if (attr) ed->carryTrim = -checkIncDecModel(event, carryTrim, not_stick ? TRIM_ON : -TRIM_OFF, -TRIM_AIL);
        break;
    }
    y += FH;
  }

  DrawFunction(expoFn);

  int x512 = getValue(ed->srcRaw);
  if (ed->srcRaw >= MIXSRC_FIRST_TELEM) {
    putsTelemetryChannelValue(LCD_W-8, 6*FH, (ed->srcRaw - MIXSRC_FIRST_TELEM) / 3, x512, 0);
    if (ed->scale > 0) x512 = (x512 * 1024) / convertTelemValue(ed->srcRaw - MIXSRC_FIRST_TELEM + 1, ed->scale);
  }
  else {
    lcd_outdezAtt(LCD_W-8, 6*FH, calcRESXto1000(x512), PREC1);
  }
  x512 = limit(-1024, x512, 1024);
  int y512 = expoFn(x512);
  y512 = limit(-1024, y512, 1024);
  lcd_outdezAtt(LCD_W-8-6*FW, 1*FH, calcRESXto1000(y512), PREC1);

  x512 = X0+x512/(RESX/WCHART);
  y512 = (LCD_H-1) - ((y512+RESX)/2) * (LCD_H-1) / RESX;

  lcd_vline(x512, y512-3, 3*2+1);
  lcd_hline(x512-3, y512, 3*2+1);
}
Exemple #7
0
void menuModelSetup(uint8_t event)
{
#if defined(CPUARM)
  #define IF_EXTERNAL_MODULE_XJT(x)         (IS_MODULE_XJT(EXTERNAL_MODULE) ? (uint8_t)x : HIDDEN_ROW)
  #define IF_EXTERNAL_MODULE_ON(x)          (g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_NONE ? HIDDEN_ROW : (uint8_t)(x))
  #define IS_D8_RX(x)                       (g_model.moduleData[x].rfProtocol == RF_PROTO_D8)
  #define EXTERNAL_MODULE_CHANNELS_ROWS()   IF_EXTERNAL_MODULE_ON(IS_MODULE_DSM2(EXTERNAL_MODULE) ? (uint8_t)0 : (uint8_t)1)
  #define EXTERNAL_MODULE_SETTINGS_ROWS()   (IS_MODULE_XJT(EXTERNAL_MODULE) && IS_D8_RX(EXTERNAL_MODULE)) ? (uint8_t)1 : (IS_MODULE_PPM(EXTERNAL_MODULE) || IS_MODULE_XJT(EXTERNAL_MODULE) || IS_MODULE_DSM2(EXTERNAL_MODULE)) ? (uint8_t)2 : HIDDEN_ROW
#if defined(PCBSKY9X) && defined(REVX)
  #define OUTPUT_TYPE_ROWS()                (IS_MODULE_PPM(EXTERNAL_MODULE) ? (uint8_t)0 : HIDDEN_ROW) ,
#else
  #define OUTPUT_TYPE_ROWS() 
#endif
  #define TRAINER_CHANNELS_ROWS()           (HIDDEN_ROW)
  #define PORT_CHANNELS_ROWS(x)             (x==EXTERNAL_MODULE ? EXTERNAL_MODULE_CHANNELS_ROWS() : 0)
  #define FAILSAFE_ROWS(x)                  ((g_model.moduleData[x].rfProtocol==RF_PROTO_X16 || g_model.moduleData[x].rfProtocol==RF_PROTO_LR12) ? (g_model.moduleData[x].failsafeMode==FAILSAFE_CUSTOM ? (uint8_t)1 : (uint8_t)0) : HIDDEN_ROW)
  #define CURSOR_ON_CELL                    (true)
  #define MODEL_SETUP_MAX_LINES             (1+ITEM_MODEL_SETUP_MAX)
  #define POT_WARN_ITEMS()                  ((g_model.nPotsToWarn >> 6) ? (uint8_t)NUM_POTS : (uint8_t)0)
  #define TIMER_ROWS                        2, 0, CASE_PERSISTENT_TIMERS(0) 0, 0
#if (defined(PCBSKY9X) && !defined(REVA) && !defined(REVX))
  #define EXTRA_MODULE_ROWS                 LABEL(ExtraModule), 1, 2,
#else
  #define EXTRA_MODULE_ROWS
#endif
  #define TRAINER_MODULE_ROWS
  MENU_TAB({ 0, 0, TIMER_ROWS, TIMER_ROWS, TIMER_ROWS, 0, 1, 0, 0, 0, 0, 0, CASE_CPUARM(LABEL(PreflightCheck)) CASE_CPUARM(0) 0, 6, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, 0, LABEL(ExternalModule), (IS_MODULE_XJT(EXTERNAL_MODULE) || IS_MODULE_DSM2(EXTERNAL_MODULE)) ? (uint8_t)1 : (uint8_t)0, EXTERNAL_MODULE_CHANNELS_ROWS(), EXTERNAL_MODULE_SETTINGS_ROWS(), OUTPUT_TYPE_ROWS() IF_EXTERNAL_MODULE_XJT(FAILSAFE_ROWS(EXTERNAL_MODULE)), EXTRA_MODULE_ROWS TRAINER_MODULE_ROWS });
#elif defined(CPUM64)
  #define CURSOR_ON_CELL                    (true)
  #define MODEL_SETUP_MAX_LINES             ((IS_PPM_PROTOCOL(protocol)||IS_DSM2_PROTOCOL(protocol)||IS_PXX_PROTOCOL(protocol)) ? 1+ITEM_MODEL_SETUP_MAX : ITEM_MODEL_SETUP_MAX)
  uint8_t protocol = g_model.protocol;
  MENU_TAB({ 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 0, 0, 0, 0, 0, 0, 0, 5, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, FIELD_PROTOCOL_MAX, 2 });
#else
  #define CURSOR_ON_CELL                    (true)
  #define MODEL_SETUP_MAX_LINES             ((IS_PPM_PROTOCOL(protocol)||IS_DSM2_PROTOCOL(protocol)||IS_PXX_PROTOCOL(protocol)) ? 1+ITEM_MODEL_SETUP_MAX : ITEM_MODEL_SETUP_MAX)
  uint8_t protocol = g_model.protocol;
  MENU_TAB({ 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 0, 1, 0, 0, 0, 0, 0, NUM_SWITCHES, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, FIELD_PROTOCOL_MAX, 2, CASE_PCBSKY9X(1) CASE_PCBSKY9X(2) });
#endif

  MENU_CHECK(menuTabModel, e_ModelSetup, MODEL_SETUP_MAX_LINES);

#if defined(CPUARM) && (defined(DSM2) || defined(PXX))
  if (menuEvent) {
    moduleFlag[0] = 0;
#if NUM_MODULES > 1
    moduleFlag[1] = 0;
#endif
  }
#endif

  TITLE(STR_MENUSETUP);

  uint8_t sub = m_posVert - 1;
  int8_t editMode = s_editMode;

  for (uint8_t i=0; i<NUM_BODY_LINES; ++i) {
    coord_t y = MENU_HEADER_HEIGHT + 1 + i*FH;
    uint8_t k = i+s_pgOfs;
#if defined(CPUARM)
    for (int j=0; j<=k; j++) {
      if (mstate_tab[j+1] == HIDDEN_ROW) {
    	if (++k >= (int)DIM(mstate_tab)) {
    	  return;
    	}
      }
    }
#endif

    LcdFlags blink = ((editMode>0) ? BLINK|INVERS : INVERS);
    LcdFlags attr = (sub == k ? blink : 0);

    switch(k) {
      case ITEM_MODEL_NAME:
        editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_MODELNAME, g_model.header.name, sizeof(g_model.header.name), event, attr);
#if defined(CPUARM)
        memcpy(modelHeaders[g_eeGeneral.currModel].name, g_model.header.name, sizeof(g_model.header.name));
#endif
        break;

#if defined(CPUARM)
      case ITEM_MODEL_TIMER1:
      case ITEM_MODEL_TIMER2:
      case ITEM_MODEL_TIMER3:
      {
        unsigned int timerIdx = (k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0));
        TimerData * timer = &g_model.timers[timerIdx];
        putsStrIdx(0*FW, y, STR_TIMER, timerIdx+1);
        putsTimerMode(MODEL_SETUP_2ND_COLUMN, y, timer->mode, m_posHorz==0 ? attr : 0);
        putsTimer(MODEL_SETUP_2ND_COLUMN+5*FW-2+5*FWNUM+1, y, timer->start, m_posHorz==1 ? attr : 0, m_posHorz==2 ? attr : 0);
        if (attr && (editMode>0 || p1valdiff)) {
          div_t qr = div(timer->start, 60);
          switch (m_posHorz) {
            case 0:
            {
              int8_t timerMode = timer->mode;
              if (timerMode < 0) timerMode -= TMRMODE_COUNT-1;
              CHECK_INCDEC_MODELVAR_CHECK(event, timerMode, -TMRMODE_COUNT-SWSRC_LAST+1, TMRMODE_COUNT+SWSRC_LAST-1, isSwitchAvailableInTimers);
              if (timerMode < 0) timerMode += TMRMODE_COUNT-1;
              timer->mode = timerMode;
#if defined(AUTOSWITCH)
              if (s_editMode>0) {
                int8_t val = timer->mode - (TMRMODE_COUNT-1);
                int8_t switchVal = checkIncDecMovedSwitch(val);
                if (val != switchVal) {
                  timer->mode = switchVal + (TMRMODE_COUNT-1);
                  eeDirty(EE_MODEL);
                }
              }
#endif
              break;
            }
            case 1:
              CHECK_INCDEC_MODELVAR_ZERO(event, qr.quot, 59);
              timer->start = qr.rem + qr.quot*60;
              break;
            case 2:
              qr.rem -= checkIncDecModel(event, qr.rem+2, 1, 62)-2;
              timer->start -= qr.rem ;
              if ((int16_t)timer->start < 0) timer->start=0;
              break;
          }
        }
        break;
      }

      case ITEM_MODEL_TIMER1_NAME:
      case ITEM_MODEL_TIMER2_NAME:
      case ITEM_MODEL_TIMER3_NAME:
      {
        TimerData * timer = &g_model.timers[k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0)];
        editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_TIMER_NAME, timer->name, sizeof(timer->name), event, attr);
        break;
      }

      case ITEM_MODEL_TIMER1_MINUTE_BEEP:
      case ITEM_MODEL_TIMER2_MINUTE_BEEP:
      case ITEM_MODEL_TIMER3_MINUTE_BEEP:
      {
        TimerData * timer = &g_model.timers[k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0)];
        timer->minuteBeep = onoffMenuItem(timer->minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
        break;
      }

      case ITEM_MODEL_TIMER1_COUNTDOWN_BEEP:
      case ITEM_MODEL_TIMER2_COUNTDOWN_BEEP:
      case ITEM_MODEL_TIMER3_COUNTDOWN_BEEP:
      {
        TimerData * timer = &g_model.timers[k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0)];
        timer->countdownBeep = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, STR_VBEEPCOUNTDOWN, timer->countdownBeep, 0, 2, attr, event);
        break;
      }

      case ITEM_MODEL_TIMER1_PERSISTENT:
      case ITEM_MODEL_TIMER2_PERSISTENT:
      case ITEM_MODEL_TIMER3_PERSISTENT:
      {
        TimerData * timer = &g_model.timers[k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0)];
        timer->persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, timer->persistent, 0, 2, attr, event);
        break;
      }
#else
      case ITEM_MODEL_TIMER1:
      case ITEM_MODEL_TIMER2:
      case ITEM_MODEL_TIMER1_MINUTE_BEEP:
      case ITEM_MODEL_TIMER2_MINUTE_BEEP:
      case ITEM_MODEL_TIMER1_COUNTDOWN_BEEP:
      case ITEM_MODEL_TIMER2_COUNTDOWN_BEEP:
      {
        TimerData *timer = &g_model.timers[k>=ITEM_MODEL_TIMER2 ? 1 : 0];
        if (k==ITEM_MODEL_TIMER1_MINUTE_BEEP || k==ITEM_MODEL_TIMER2_MINUTE_BEEP) {
          timer->minuteBeep = onoffMenuItem(timer->minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
        }
        else if (k==ITEM_MODEL_TIMER1_COUNTDOWN_BEEP || k==ITEM_MODEL_TIMER2_COUNTDOWN_BEEP) {
          timer->countdownBeep = onoffMenuItem(timer->countdownBeep, MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, attr, event);
        }
        else {
          putsStrIdx(0*FW, y, STR_TIMER, k>=ITEM_MODEL_TIMER2 ? 2 : 1);
          putsTimerMode(MODEL_SETUP_2ND_COLUMN, y, timer->mode, m_posHorz==0 ? attr : 0);
          putsTimer(MODEL_SETUP_2ND_COLUMN+5*FW-2+5*FWNUM+1, y, timer->start, m_posHorz==1 ? attr : 0, m_posHorz==2 ? attr : 0);
          if (attr && (editMode>0 || p1valdiff)) {
            div_t qr = div(timer->start, 60);
            switch (m_posHorz) {
              case 0:
                CHECK_INCDEC_MODELVAR_CHECK(event, timer->mode, SWSRC_FIRST, TMRMODE_COUNT+SWSRC_LAST-1/*SWSRC_None removed*/, isSwitchAvailableInTimers);
                break;
              case 1:
                CHECK_INCDEC_MODELVAR_ZERO(event, qr.quot, 59);
                timer->start = qr.rem + qr.quot*60;
                break;
              case 2:
                qr.rem -= checkIncDecModel(event, qr.rem+2, 1, 62)-2;
                timer->start -= qr.rem ;
                break;
            }
          }
        }
        break;
      }

#if defined(CPUM2560)
      case ITEM_MODEL_TIMER1_PERSISTENT:
      case ITEM_MODEL_TIMER2_PERSISTENT:
      {
        TimerData &timer = g_model.timers[k==ITEM_MODEL_TIMER2_PERSISTENT];
        timer.persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, timer.persistent, 0, 2, attr, event);
        break;
      }
#endif
#endif

      case ITEM_MODEL_EXTENDED_LIMITS:
        ON_OFF_MENU_ITEM(g_model.extendedLimits, MODEL_SETUP_2ND_COLUMN, y, STR_ELIMITS, attr, event);
        break;

      case ITEM_MODEL_EXTENDED_TRIMS:
#if defined(CPUM64)
        ON_OFF_MENU_ITEM(g_model.extendedTrims, MODEL_SETUP_2ND_COLUMN, y, STR_ETRIMS, attr, event);
#else
        ON_OFF_MENU_ITEM(g_model.extendedTrims, MODEL_SETUP_2ND_COLUMN, y, STR_ETRIMS, m_posHorz<=0 ? attr : 0, event==EVT_KEY_BREAK(KEY_ENTER) ? event : 0);
        lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_RESET_BTN, m_posHorz>0  && !s_noHi ? attr : 0);
        if (attr && m_posHorz>0) {
          s_editMode = 0;
          if (event==EVT_KEY_LONG(KEY_ENTER)) {
            s_noHi = NO_HI_LEN;
            for (uint8_t i=0; i<MAX_FLIGHT_MODES; i++) {
              memclear(&g_model.flightModeData[i], TRIMS_ARRAY_SIZE);
            }
            eeDirty(EE_MODEL);
            AUDIO_WARNING1();
          }
        }
#endif
        break;

#if defined(CPUARM)
      case ITEM_MODEL_DISPLAY_TRIMS:
        g_model.displayTrims = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_DISPLAY_TRIMS, STR_VDISPLAYTRIMS, g_model.displayTrims, 0, 2, attr, event);
        break;
#endif

      case ITEM_MODEL_TRIM_INC:
        g_model.trimInc = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_TRIMINC, STR_VTRIMINC, g_model.trimInc, -2, 2, attr, event);
        break;

      case ITEM_MODEL_THROTTLE_REVERSED:
        ON_OFF_MENU_ITEM(g_model.throttleReversed, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEREVERSE, attr, event ) ;
        break;

      case ITEM_MODEL_THROTTLE_TRACE:
      {
        lcd_putsLeft(y, STR_TTRACE);
        if (attr) CHECK_INCDEC_MODELVAR_ZERO(event, g_model.thrTraceSrc, NUM_POTS+NUM_CHNOUT);
        uint8_t idx = g_model.thrTraceSrc + MIXSRC_Thr;
        if (idx > MIXSRC_Thr)
          idx += 1;
        if (idx >= MIXSRC_FIRST_POT+NUM_POTS)
          idx += MIXSRC_CH1 - MIXSRC_FIRST_POT - NUM_POTS;
        putsMixerSource(MODEL_SETUP_2ND_COLUMN, y, idx, attr);
        break;
      }

      case ITEM_MODEL_THROTTLE_TRIM:
        ON_OFF_MENU_ITEM(g_model.thrTrim, MODEL_SETUP_2ND_COLUMN, y, STR_TTRIM, attr, event);
        break;

#if defined(CPUARM)
      case ITEM_MODEL_PREFLIGHT_LABEL:
        lcd_putsLeft(y, STR_PREFLIGHT);
        break;

      case ITEM_MODEL_CHECKLIST_DISPLAY:
        ON_OFF_MENU_ITEM(g_model.displayChecklist, MODEL_SETUP_2ND_COLUMN, y, STR_CHECKLIST, attr, event);
        break;
#endif

      case ITEM_MODEL_THROTTLE_WARNING:
        g_model.disableThrottleWarning = !onoffMenuItem(!g_model.disableThrottleWarning, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEWARNING, attr, event);
        break;

      case ITEM_MODEL_SWITCHES_WARNING:
      {
        lcd_putsLeft(y, STR_SWITCHWARNING);
        swarnstate_t states = g_model.switchWarningState;
        char c;
        if (attr) {
          s_editMode = 0;
          if (!READ_ONLY()) {
            switch (event) {
              CASE_EVT_ROTARY_BREAK
              case EVT_KEY_BREAK(KEY_ENTER):
#if defined(CPUM64)
                g_model.switchWarningEnable ^= (1 << m_posHorz);
                eeDirty(EE_MODEL);
#else
                if (m_posHorz < NUM_SWITCHES-1) {
                  g_model.switchWarningEnable ^= (1 << m_posHorz);
                  eeDirty(EE_MODEL);
                }
#endif
                break;

              case EVT_KEY_LONG(KEY_ENTER):
#if defined(CPUM64)
                getMovedSwitch();
                g_model.switchWarningState = switches_states;
                AUDIO_WARNING1();
                eeDirty(EE_MODEL);
#else
                if (m_posHorz == NUM_SWITCHES-1) {
                  s_noHi = NO_HI_LEN;
                  getMovedSwitch();
                  g_model.switchWarningState = switches_states;
                  AUDIO_WARNING1();
                  eeDirty(EE_MODEL);
                }
#endif
                killEvents(event);
                break;
            }
          }
        }

        LcdFlags line = attr;

        for (uint8_t i=0; i<NUM_SWITCHES-1/*not on TRN switch*/; i++) {
          uint8_t swactive = !(g_model.switchWarningEnable & 1 << i);
          attr = 0;

          if (IS_3POS(i)) {
            c = '0'+(states & 0x03);
            states >>= 2;
          }
          else {
            if ((states & 0x01) && swactive)
              attr = INVERS;
            c = pgm_read_byte(STR_VSWITCHES - 2 + 9 + (3*(i+1)));
            states >>= 1;
          }
          if (line && (m_posHorz == i)) {
            attr = BLINK;
            if (swactive)
              attr |= INVERS;
          }
          lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+i*FW, y, (swactive || (attr & BLINK)) ? c : '-', attr);
#if !defined(CPUM64)
          lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+(NUM_SWITCHES*FW), y, PSTR("<]"), (m_posHorz == NUM_SWITCHES-1 && !s_noHi) ? line : 0);
#endif
        }
        break;
      }

      case ITEM_MODEL_BEEP_CENTER:
        lcd_putsLeft(y, STR_BEEPCTR);
        for (uint8_t i=0; i<NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS; i++) {
          // TODO flash saving, \001 not needed in STR_RETA123
          coord_t x = MODEL_SETUP_2ND_COLUMN+i*FW;
          lcd_putsiAtt(x, y, STR_RETA123, i, ((m_posHorz==i) && attr) ? BLINK|INVERS : (((g_model.beepANACenter & ((BeepANACenter)1<<i)) || (attr && CURSOR_ON_LINE())) ? INVERS : 0 ) );
        }
        if (attr && CURSOR_ON_CELL) {
          if (event==EVT_KEY_BREAK(KEY_ENTER) || p1valdiff) {
            if (READ_ONLY_UNLOCKED()) {
              s_editMode = 0;
              g_model.beepANACenter ^= ((BeepANACenter)1<<m_posHorz);
              eeDirty(EE_MODEL);
            }
          }
        }
        break;

#if defined(CPUARM)
      case ITEM_MODEL_USE_GLOBAL_FUNCTIONS:
        lcd_putsLeft(y, STR_USE_GLOBAL_FUNCS);
        menu_lcd_onoff(MODEL_SETUP_2ND_COLUMN, y, !g_model.noGlobalFunctions, attr);
        if (attr) g_model.noGlobalFunctions = !checkIncDecModel(event, !g_model.noGlobalFunctions, 0, 1);
        break;
#endif

#if defined(PCBSKY9X) && !defined(REVX)
      case ITEM_MODEL_EXTRA_MODULE_LABEL:
        lcd_putsLeft(y, "RF Port 2 (PPM)");
        break;
#endif

#if defined(CPUARM)
      case ITEM_MODEL_EXTERNAL_MODULE_LABEL:
        lcd_putsLeft(y, TR_EXTERNALRF);
        break;

      case ITEM_MODEL_EXTERNAL_MODULE_MODE:
        lcd_putsLeft(y, STR_MODE);
        lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_TARANIS_PROTOCOLS, g_model.moduleData[EXTERNAL_MODULE].type, m_posHorz==0 ? attr : 0);
        if (IS_MODULE_XJT(EXTERNAL_MODULE))
          lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+5*FW, y, STR_XJT_PROTOCOLS, 1+g_model.moduleData[EXTERNAL_MODULE].rfProtocol, m_posHorz==1 ? attr : 0);
        else if (IS_MODULE_DSM2(EXTERNAL_MODULE))
          lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+5*FW, y, STR_DSM_PROTOCOLS, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, m_posHorz==1 ? attr : 0);
        if (attr && (editMode>0 || p1valdiff)) {
          switch (m_posHorz) {
            case 0:
              g_model.moduleData[EXTERNAL_MODULE].type = checkIncDec(event, g_model.moduleData[EXTERNAL_MODULE].type, MODULE_TYPE_NONE, MODULE_TYPE_COUNT-1, EE_MODEL, isModuleAvailable);
              if (checkIncDec_Ret) {
                g_model.moduleData[EXTERNAL_MODULE].rfProtocol = 0;
                g_model.moduleData[EXTERNAL_MODULE].channelsStart = 0;
                if (g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_PPM)
                  g_model.moduleData[EXTERNAL_MODULE].channelsCount = 0;
                else
                  g_model.moduleData[EXTERNAL_MODULE].channelsCount = MAX_EXTERNAL_MODULE_CHANNELS();
              }
              break;
            case 1:
              if (IS_MODULE_DSM2(EXTERNAL_MODULE))
                CHECK_INCDEC_MODELVAR(event, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, DSM2_PROTO_LP45, DSM2_PROTO_DSMX);
              else
                CHECK_INCDEC_MODELVAR(event, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, RF_PROTO_X16, RF_PROTO_LAST);
              if (checkIncDec_Ret) {
                g_model.moduleData[EXTERNAL_MODULE].channelsStart = 0;
                g_model.moduleData[EXTERNAL_MODULE].channelsCount = MAX_EXTERNAL_MODULE_CHANNELS();
              }
          }
        }
        break;
#endif

#if defined(PCBSKY9X) && !defined(REVX)
      case ITEM_MODEL_EXTRA_MODULE_CHANNELS:
#endif
#if defined(CPUARM)
      case ITEM_MODEL_EXTERNAL_MODULE_CHANNELS:
      {
        uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
        ModuleData & moduleData = g_model.moduleData[moduleIdx];
        lcd_putsLeft(y, STR_CHANNELRANGE);
        if ((int8_t)PORT_CHANNELS_ROWS(moduleIdx) >= 0) {
          lcd_putsAtt(MODEL_SETUP_2ND_COLUMN, y, STR_CH, m_posHorz==0 ? attr : 0);
          lcd_outdezAtt(lcdLastPos, y, moduleData.channelsStart+1, LEFT | (m_posHorz==0 ? attr : 0));
          lcd_putc(lcdLastPos, y, '-');
          lcd_outdezAtt(lcdLastPos + FW+1, y, moduleData.channelsStart+NUM_CHANNELS(moduleIdx), LEFT | (m_posHorz==1 ? attr : 0));
          if (attr && (editMode>0 || p1valdiff)) {
            switch (m_posHorz) {
              case 0:
                CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.channelsStart, 32-8-moduleData.channelsCount);
                break;
              case 1:
                CHECK_INCDEC_MODELVAR(event, moduleData.channelsCount, -4, min<int8_t>(MAX_CHANNELS(moduleIdx), 32-8-moduleData.channelsStart));
                if ((k == ITEM_MODEL_EXTERNAL_MODULE_CHANNELS && g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_PPM)) {
                  SET_DEFAULT_PPM_FRAME_LENGTH(moduleIdx);
                }
                break;
            }
          }
        }
        break;
      }
#endif

#if defined(PCBSKY9X) && !defined(REVX)
      case ITEM_MODEL_EXTRA_MODULE_BIND:
#endif
#if defined(CPUARM)
      case ITEM_MODEL_EXTERNAL_MODULE_BIND:
      {
        uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
        ModuleData & moduleData = g_model.moduleData[moduleIdx];
        if (IS_MODULE_PPM(moduleIdx)) {
          lcd_putsLeft(y, STR_PPMFRAME);
          lcd_puts(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
          lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN, y, (int16_t)moduleData.ppmFrameLength*5 + 225, (m_posHorz<=0 ? attr : 0) | PREC1|LEFT);
          lcd_putc(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
          lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (moduleData.ppmDelay*50)+300, (CURSOR_ON_LINE() || m_posHorz==1) ? attr : 0);
          lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, moduleData.ppmPulsePol ? '+' : '-', (CURSOR_ON_LINE() || m_posHorz==2) ? attr : 0);

          if (attr && (editMode>0 || p1valdiff)) {
            switch (m_posHorz) {
              case 0:
                CHECK_INCDEC_MODELVAR(event, moduleData.ppmFrameLength, -20, 35);
                break;
              case 1:
                CHECK_INCDEC_MODELVAR(event, moduleData.ppmDelay, -4, 10);
                break;
              case 2:
                CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.ppmPulsePol, 1);
                break;
            }
          }
        }
        else {
          horzpos_t l_posHorz = m_posHorz;
          coord_t xOffsetBind = MODEL_SETUP_BIND_OFS;
          if (IS_MODULE_XJT(moduleIdx) && IS_D8_RX(moduleIdx)) {
            xOffsetBind = 0;
            lcd_putsLeft(y, INDENT "Receiver");
            if (attr) l_posHorz += 1;
          }
          else {
            lcd_putsLeft(y, STR_RXNUM);
          }
          if (IS_MODULE_XJT(moduleIdx) || IS_MODULE_DSM2(moduleIdx)) {
            if (xOffsetBind) lcd_outdezNAtt(MODEL_SETUP_2ND_COLUMN, y, g_model.header.modelId[moduleIdx], (l_posHorz==0 ? attr : 0) | LEADING0|LEFT, 2);
            if (attr && l_posHorz==0) {
              if (editMode>0 || p1valdiff) {
                CHECK_INCDEC_MODELVAR_ZERO(event, g_model.header.modelId[moduleIdx], IS_MODULE_DSM2(moduleIdx) ? 20 : 63);
                if (checkIncDec_Ret) {
                  modelHeaders[g_eeGeneral.currModel].modelId[moduleIdx] = g_model.header.modelId[moduleIdx];
                }
              }
              if (editMode==0 && event==EVT_KEY_BREAK(KEY_ENTER)) {
                checkModelIdUnique(g_eeGeneral.currModel, moduleIdx);
              }
            }
            lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+xOffsetBind, y, STR_MODULE_BIND, l_posHorz==1 ? attr : 0);
            lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+MODEL_SETUP_RANGE_OFS+xOffsetBind, y, STR_MODULE_RANGE, l_posHorz==2 ? attr : 0);
            uint8_t newFlag = 0;
            if (attr && l_posHorz>0 && s_editMode>0) {
              if (l_posHorz == 1)
                newFlag = MODULE_BIND;
              else if (l_posHorz == 2) {
                newFlag = MODULE_RANGECHECK;
              }
            }
            moduleFlag[moduleIdx] = newFlag;
          }
        }
        break;
      }
#endif

#if defined(PCBSKY9X) && defined(REVX)
      case ITEM_MODEL_EXTERNAL_MODULE_OUTPUT_TYPE:
      {
        uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
        ModuleData & moduleData = g_model.moduleData[moduleIdx];
        moduleData.ppmOutputType = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_OUTPUT_TYPE, STR_VOUTPUT_TYPE, moduleData.ppmOutputType, 0, 1, attr, event);
        break;
      }
#endif

#if defined(CPUARM)
      case ITEM_MODEL_EXTERNAL_MODULE_FAILSAFE:
      {
        uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
        ModuleData & moduleData = g_model.moduleData[moduleIdx];
        lcd_putsLeft(y, TR_FAILSAFE);
        if (IS_MODULE_XJT(moduleIdx)) {
          lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VFAILSAFE, moduleData.failsafeMode, m_posHorz==0 ? attr : 0);
          if (moduleData.failsafeMode == FAILSAFE_CUSTOM) lcd_putsAtt(MODEL_SETUP_2ND_COLUMN + MODEL_SETUP_SET_FAILSAFE_OFS, y, STR_SET, m_posHorz==1 ? attr : 0);
          if (attr) {
            if (moduleData.failsafeMode != FAILSAFE_CUSTOM)
              m_posHorz = 0;
            if (m_posHorz==0) {
              if (editMode>0 || p1valdiff) {
                CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.failsafeMode, FAILSAFE_LAST);
                if (checkIncDec_Ret) SEND_FAILSAFE_NOW(moduleIdx);
              }
            }
            else if (m_posHorz==1) {
              s_editMode = 0;
              if (moduleData.failsafeMode==FAILSAFE_CUSTOM && event==EVT_KEY_FIRST(KEY_ENTER)) {
                g_moduleIdx = moduleIdx;
                pushMenu(menuModelFailsafe);
              }
            }
            else {
              drawFilledRect(MODEL_SETUP_2ND_COLUMN, y, LCD_W-MODEL_SETUP_2ND_COLUMN-MENUS_SCROLLBAR_WIDTH, 8);
            }
          }
        }
        break;
      }
#endif

#if !defined(CPUARM)
      case ITEM_MODEL_PPM1_PROTOCOL:
        lcd_putsLeft(y, NO_INDENT(STR_PROTO));
        lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VPROTOS, protocol, m_posHorz<=0 ? attr : 0);
        if (IS_PPM_PROTOCOL(protocol)) {
          lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+7*FW, y, STR_NCHANNELS, g_model.ppmNCH+2, m_posHorz!=0 ? attr : 0);
        }
        else if (m_posHorz>0 && attr) {
          MOVE_CURSOR_FROM_HERE();
        }
        if (attr && (editMode>0 || p1valdiff || (!IS_PPM_PROTOCOL(protocol) && !IS_DSM2_PROTOCOL(protocol)))) {
          switch (m_posHorz) {
            case 0:
              CHECK_INCDEC_MODELVAR_ZERO(event, g_model.protocol, PROTO_MAX-1);
              break;
            case 1:
              CHECK_INCDEC_MODELVAR(event, g_model.ppmNCH, -2, 4);
              g_model.ppmFrameLength = g_model.ppmNCH * 8;
              break;
          }
        }
        break;
#endif

#if 0
      case ITEM_MODEL_PPM2_PROTOCOL:
        lcd_putsLeft(y, PSTR("Port2"));
        lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VPROTOS, 0, 0);
        lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+4*FW+3, y, STR_CH, m_posHorz<=0 ? attr : 0);
        lcd_outdezAtt(lcdLastPos, y, g_model.moduleData[1].channelsStart+1, LEFT | (m_posHorz<=0 ? attr : 0));
        lcd_putc(lcdLastPos, y, '-');
        lcd_outdezAtt(lcdLastPos + FW+1, y, g_model.moduleData[1].channelsStart+8+g_model.moduleData[1].channelsCount, LEFT | (m_posHorz!=0 ? attr : 0));
        if (attr && (editMode>0 || p1valdiff)) {
          switch (m_posHorz) {
            case 0:
              CHECK_INCDEC_MODELVAR_ZERO(event, g_model.moduleData[1].channelsStart, 32-8-g_model.moduleData[1].channelsCount);
              SET_DEFAULT_PPM_FRAME_LENGTH(1);
              break;
            case 1:
              CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].channelsCount, -4, min<int8_t>(8, 32-8-g_model.moduleData[1].channelsStart));
              SET_DEFAULT_PPM_FRAME_LENGTH(1);
              break;
          }
        }
        break;

      case ITEM_MODEL_PPM2_PARAMS:
        lcd_putsLeft(y, STR_PPMFRAME);
        lcd_puts(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
        lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN, y, (int16_t)g_model.moduleData[1].ppmFrameLength*5 + 225, (m_posHorz<=0 ? attr : 0) | PREC1|LEFT);
        lcd_putc(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
        lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (g_model.moduleData[1].ppmDelay*50)+300, (m_posHorz < 0 || m_posHorz==1) ? attr : 0);
        lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, g_model.moduleData[1].ppmPulsePol ? '+' : '-', (m_posHorz < 0 || m_posHorz==2) ? attr : 0);
        if (attr && (editMode>0 || p1valdiff)) {
          switch (m_posHorz) {
            case 0:
              CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].ppmFrameLength, -20, 35);
              break;
            case 1:
              CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].ppmDelay, -4, 10);
              break;
            case 2:
              CHECK_INCDEC_MODELVAR_ZERO(event, g_model.moduleData[1].ppmPulsePol, 1);
              break;
          }
        }
        break;
#endif

#if !defined(CPUARM)
      case ITEM_MODEL_PPM1_PARAMS:
        if (IS_PPM_PROTOCOL(protocol)) {
          lcd_putsLeft(y, STR_PPMFRAME);
          lcd_puts(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
          lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN, y, (int16_t)g_model.ppmFrameLength*5 + 225, (m_posHorz<=0 ? attr : 0) | PREC1|LEFT);
          lcd_putc(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
          lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (g_model.ppmDelay*50)+300, (CURSOR_ON_LINE() || m_posHorz==1) ? attr : 0);
          lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, g_model.pulsePol ? '+' : '-', (CURSOR_ON_LINE() || m_posHorz==2) ? attr : 0);
          if (attr && (editMode>0 || p1valdiff)) {
            switch (m_posHorz) {
              case 0:
                CHECK_INCDEC_MODELVAR(event, g_model.ppmFrameLength, -20, 35);
                break;
              case 1:
                CHECK_INCDEC_MODELVAR(event, g_model.ppmDelay, -4, 10);
                break;
              case 2:
                CHECK_INCDEC_MODELVAR_ZERO(event, g_model.pulsePol, 1);
                break;
            }
          }
        }
#if defined(DSM2) || defined(PXX)
        else if (IS_DSM2_PROTOCOL(protocol) || IS_PXX_PROTOCOL(protocol)) {
          if (attr && m_posHorz > 1) {
            REPEAT_LAST_CURSOR_MOVE(); // limit 3 column row to 2 colums (Rx_Num and RANGE fields)
          }
          lcd_putsLeft(y, STR_RXNUM);
          lcd_outdezNAtt(MODEL_SETUP_2ND_COLUMN, y, g_model.header.modelId[0], (m_posHorz<=0 ? attr : 0) | LEADING0|LEFT, 2);
          if (attr && (m_posHorz==0 && (editMode>0 || p1valdiff))) {
            CHECK_INCDEC_MODELVAR_ZERO(event, g_model.header.modelId[0], 99);
          }
#if defined(PXX)
          if (protocol == PROTO_PXX) {
            lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+4*FW, y, STR_SYNCMENU, m_posHorz!=0 ? attr : 0);
            uint8_t newFlag = 0;
            if (attr && m_posHorz>0 && editMode>0) {
              // send reset code
              newFlag = MODULE_BIND;
            }
            moduleFlag[0] = newFlag;
          }
#endif
#if defined(DSM2)
          if (IS_DSM2_PROTOCOL(protocol)) {
            lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+4*FW, y, STR_MODULE_RANGE, m_posHorz!=0 ? attr : 0);
            moduleFlag[0] = (attr && m_posHorz>0 && editMode>0) ? MODULE_RANGECHECK : 0; // [MENU] key toggles range check mode
          }
#endif
        }
#endif
        break;
#endif
    }
  }