LWS_VISIBLE int
lws_plat_context_early_init(void)
{
espconn_tcp_set_max_con(12);
return 0;
}
void ICACHE_FLASH_ATTR init_http_server(){
//general max tcp conns
espconn_tcp_set_max_con(20);
http_server_init();
http_server_bind_domain(INTERFACE_DOMAIN);
http_server_enable_captive_portal();
http_server_enable_cors();
http_server_rewrite(&rewrites);
http_server_bind_urls((http_server_url *)&api_urls);
http_server_start();
//ws
init_ws_server();
}
/**
@brief main() Initialize user task
@return void
*/
MEMSPACE
void setup(void)
{
int i;
char time[20];
int ret;
uint16_t *ptr;
double ang;
extern web_init();
int w,h;
ip_msg[0] = 0;
// CPU
// 160MHZ
REG_SET_BIT(0x3ff00014, BIT(0));
// 80MHZ
// REG_CLR_BIT(0x3ff00014, BIT(0));
os_delay_us(200000L); // Power Up dalay - lets power supplies and devices settle
// Configure the UART
//uart_init(BIT_RATE_115200,BIT_RATE_115200);
uart_init(BIT_RATE_74880,BIT_RATE_74880);
os_delay_us(200000L); // Power Up dalay - lets power supplies and devices settle
os_delay_us(200000L); // Power Up dalay - lets power supplies and devices settle
printf("\n\n\n\n");
sep();
printf("System init...\n");
printf("ESP8266 multidevice project\n");
printf(" (c) 2014-2017 by Mike Gore\n");
printf(" GNU version 3\n");
printf("-> https://github.com/magore/esp8266_ili9341\n");
printf(" GIT last pushed: %s\n", GIT_VERSION);
printf(" Last updated file: %s\n", LOCAL_MOD);
sep();
PrintRam();
sep();
printf("HSPI init...\n");
hspi_init(1,0);
printf("Timers init...\n");
init_timers();
// 1000HZ timer
ms_init();
test_types();
// Functions manage user defined address pins
chip_addr_init();
initialize_clock(300);
#ifdef ADF4351
#ifdef ADF4351_CS
chip_select_init(ADF4351_CS);
#endif
ADF4351_Init();
printf("ADF4351 init done\n");
#endif
// Make sure all other GPIO pins are initialized BEFORE SD card
#ifdef FATFS_SUPPORT
sep();
// Functions manage chip selects
#ifdef MMC_CS
chip_select_init(MMC_CS);
#endif
printf("SD Card init...\n");
mmc_init(1);
#endif
#ifdef DISPLAY
sep();
#ifdef ILI9341_CS
chip_select_init(ILI9341_CS);
#endif
#ifdef XPT2046_CS
XPT2046_spi_init();
#endif
// Initialize TFT
master = tft_init();
tft_calX = MatRead("/tft_calX");
tft_calY = MatRead("/tft_calY");
if(tft_calX.data == NULL || tft_calY.data == NULL)
tft_is_calibrated = 0;
else
tft_is_calibrated = 1;
printf("TFT calibration %s\n", tft_is_calibrated ? "YES" : "NO");
// rotateion = 1, debug = 1
setup_windows(1,1);
#endif
wdt_reset();
sep();
printf("Setup Tasks\n");
sep();
setup_networking();
#ifdef TELNET_SERIAL
printf("Setup Network Serial Bridge\n");
bridge_task_init(23);
#endif
if ( espconn_tcp_set_max_con(MAX_CONNECTIONS+1) )
printf("espconn_tcp_set_max_con(%d) != (%d) - failed!\n",
MAX_CONNECTIONS+1, espconn_tcp_get_max_con());
else
printf("espconn_tcp_set_max_con(%d) = (%d) - success!\n",
MAX_CONNECTIONS+1, espconn_tcp_get_max_con());
#ifdef NETWORK_TEST
printf("Setup Network TFT Display Client\n");
servertest_setup(TCP_PORT);
#endif
#ifdef WEBSERVER
printf("Setup Network WEB SERVER\n");
web_init(80);
#endif
sep();
PrintRam();
system_set_os_print(0);
} //setup()
