/**
* See if a factory reset is needed. The 'init_ok' event is
* thrown and any catchers can return FALSE if a factory reset
* should occur. The accept button must be pressed afterwards
* to confirm.
*/
void factory_reset_if_required (void)
{
if (!callset_invoke_boolean (init_ok))
{
dmd_alloc_low_clean ();
font_render_string_center (&font_mono5, 64, 10, "FACTORY SETTINGS");
font_render_string_center (&font_mono5, 64, 20, "RESTORED");
dmd_show_low ();
factory_reset ();
task_sleep_sec (4);
warm_reboot ();
}
}
void system_accept_freewpc (void)
{
if ((freewpc_accepted[0] == ACCEPT_1) &&
(freewpc_accepted[1] == ACCEPT_2) &&
(freewpc_accepted[2] == ACCEPT_3))
return;
#ifdef CONFIG_DMD
dmd_alloc_low_clean ();
font_render_string_center (&font_mono5, 64, 3, "FREEWPC");
font_render_string_center (&font_mono5, 64, 9, "WARNING... BALLY WMS");
font_render_string_center (&font_mono5, 64, 15, "DOES NOT SUPPORT");
font_render_string_center (&font_mono5, 64, 21, "THIS SOFTWARE");
font_render_string_center (&font_mono5, 64, 27, "PRESS ENTER");
dmd_show_low ();
wait_for_button (SW_ENTER);
dmd_alloc_low_clean ();
font_render_string_center (&font_mono5, 64, 3, "FREEWPC");
font_render_string_center (&font_mono5, 64, 9, "NO WARRANTY EXISTS");
font_render_string_center (&font_mono5, 64, 15, "ROM MAY CAUSE DAMAGE");
font_render_string_center (&font_mono5, 64, 21, "TO REAL MACHINE");
font_render_string_center (&font_mono5, 64, 27, "PRESS ENTER");
dmd_show_low ();
wait_for_button (SW_ENTER);
dmd_alloc_low_clean ();
font_render_string_center (&font_mono5, 64, 3, "FREEWPC");
font_render_string_center (&font_mono5, 64, 9, "IF YOU ARE SURE YOU");
font_render_string_center (&font_mono5, 64, 15, "WANT TO CONTINUE");
font_render_string_center (&font_mono5, 64, 21, "PRESS ENTER TWICE");
dmd_show_low ();
wait_for_button (SW_ENTER);
wait_for_button (SW_ENTER);
dmd_alloc_low_clean ();
dmd_show_low ();
task_sleep_sec (1);
#endif
pinio_nvram_unlock ();
freewpc_accepted[0] = ACCEPT_1;
freewpc_accepted[1] = ACCEPT_2;
freewpc_accepted[2] = ACCEPT_3;
pinio_nvram_lock ();
factory_reset ();
warm_reboot ();
}
/**
* See if a factory reset is needed. The 'init_ok' event is
* thrown and any catchers can return FALSE if a factory reset
* should occur. The accept button must be pressed afterwards
* to confirm.
*/
void factory_reset_if_required (void)
{
if (!callset_invoke_boolean (init_ok))
{
deff_stop (DEFF_SYSTEM_RESET);
#ifdef CONFIG_DMD_OR_ALPHA
dmd_alloc_low_clean ();
font_render_string_center (&font_mono5, 64, 10, "FACTORY SETTINGS");
font_render_string_center (&font_mono5, 64, 20, "RESTORED");
dmd_show_low ();
#endif
factory_reset ();
task_sleep_sec (4);
warm_reboot ();
}
}
void main()
{
CyGlobalIntEnable;
#if USE_WATCHDOG
// Enable watchdog timer for every 2 seconds
CySysWdtWriteMode(0, CY_SYS_WDT_MODE_RESET);
CySysWdtWriteMatch(0, 0xFFFF);
CySysWdtEnable(CY_SYS_WDT_COUNTER0_MASK);
#endif
if(settings->settings_version < default_settings.settings_version)
factory_reset();
Backlight_Write(1);
disp_reset_Write(0);
CyDelayUs(10);
disp_reset_Write(1);
CyDelayUs(10);
Display_Start();
Display_SetContrast(settings->lcd_contrast);
#ifdef USE_SPLASHSCREEN
load_splashscreen();
#endif
IDAC_High_Start();
IDAC_Low_Start();
state.calibrating = 0;
set_current(0);
set_output_mode(OUTPUT_MODE_FEEDBACK);
start_adc();
setup();
//Create the two tasks
xTaskCreate(vTaskUI, (signed portCHAR *) "UI", 178, NULL, tskIDLE_PRIORITY + 2, &ui_task);
xTaskCreate(vTaskComms, (signed portCHAR *) "UART", 180, NULL, tskIDLE_PRIORITY + 2, &comms_task);
prvHardwareSetup();
vTaskStartScheduler();
}
void main(void)
{
int32_t t_spread;
uint32_t i;
NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x8000);
LED_ON(LED_RING_OE); //actually turns the LED ring off
LEDDriver_Init(5);
for (i=0;i<26;i++) LEDDriver_setRGBLED(i,0);
LED_OFF(LED_RING_OE); //actually turns the LED ring on
flag_update_LED_ring=1;
init_inouts();
init_rotary();
init_envout_pwm();
ADC1_Init((uint16_t *)adc_buffer);
ADC3_Init((uint16_t *)potadc_buffer);
Codec_Init(SAMPLERATE);
delay();
set_default_param_values();
set_default_color_scheme();
set_default_user_scalebank();
//overwrite default parameters if a startup bank exists
cur_param_bank = load_startup_params();
if (cur_param_bank == 0xFF){
factory_reset();
cur_param_bank=0;
}
I2S_Block_Init();
TIM6_Config();
DAC_Ch1_NoiseConfig();
spread=(adc_buffer[SPREAD_ADC] >> 8) + 1;
I2S_Block_PlayRec();
//update_spread(1);
while(1){
check_errors();
param_read_switches();
update_ENVOUT_PWM();
update_LED_ring();
update_lock_leds();
t_spread=read_spread();
if (t_spread!=-1) update_spread(t_spread);
process_lock_jacks();
process_lock_buttons();
param_read_q();
param_read_freq_nudge();
param_read_channel_level();
process_rotary_button();
process_rotary_rotation();
if (ui_mode==PLAY)
check_rotary_pressed_repeatedly();
if (ui_mode==EDIT_SCALES)
handle_edit_scale();
if (ui_mode==EDIT_COLORS)
handle_edit_colors();
if (ui_mode==SELECT_PARAMS){
handle_freqpot_changing_filtermode();
handle_slider_changing_clipmode();
}
if (do_ROTUP){
do_ROTUP=0;
rotate_up();
}
if (do_ROTDOWN){
do_ROTDOWN=0;
rotate_down();
}
process_rotateCV();
process_scaleCV();
} //end main loop
} //end main()
