Exemple #1
0
int
poll_fd (int fd, int timeout_sec, int check_signals)
{
    int ret;
    struct fd_data fds = FDS_INIT (NULL);

    if (fds_add (&fds, fd, 1, timeout_sec) == -1)
        return -1;
    do
    {
        ret = fds_poll_recv (&fds, timeout_sec, check_signals, NULL);
    }
    while (ret == -1 && errno == EINTR);
    fds_free (&fds);
    return ret;
}
Exemple #2
0
int recvloop_th(int *socketds, unsigned nsockets, struct cl_engine *engine, unsigned int dboptions, const struct optstruct *opts)
{
	int max_threads, max_queue, readtimeout, ret = 0;
	unsigned int options = 0;
	char timestr[32];
#ifndef	_WIN32
	struct sigaction sigact;
	sigset_t sigset;
	struct rlimit rlim;
#endif
	mode_t old_umask;
	const struct optstruct *opt;
	char buff[BUFFSIZE + 1];
	pid_t mainpid;
	int idletimeout;
	unsigned long long val;
	size_t i, j, rr_last = 0;
	pthread_t accept_th;
	pthread_mutex_t fds_mutex = PTHREAD_MUTEX_INITIALIZER;
	pthread_mutex_t recvfds_mutex = PTHREAD_MUTEX_INITIALIZER;
	struct acceptdata acceptdata = ACCEPTDATA_INIT(&fds_mutex, &recvfds_mutex);
	struct fd_data *fds = &acceptdata.recv_fds;
	time_t start_time, current_time;
	unsigned int selfchk;
	threadpool_t *thr_pool;

#if defined(FANOTIFY) || defined(CLAMAUTH)
	pthread_t fan_pid;
	pthread_attr_t fan_attr;
	struct thrarg *tharg = NULL; /* shut up gcc */
#endif

#ifndef	_WIN32
	memset(&sigact, 0, sizeof(struct sigaction));
#endif

    /* set up limits */
    if((opt = optget(opts, "MaxScanSize"))->active) {
	if((ret = cl_engine_set_num(engine, CL_ENGINE_MAX_SCANSIZE, opt->numarg))) {
	    logg("!cl_engine_set_num(CL_ENGINE_MAX_SCANSIZE) failed: %s\n", cl_strerror(ret));
	    cl_engine_free(engine);
	    return 1;
	}
    }
    val = cl_engine_get_num(engine, CL_ENGINE_MAX_SCANSIZE, NULL);
    if(val)
    	logg("Limits: Global size limit set to %llu bytes.\n", val);
    else
    	logg("^Limits: Global size limit protection disabled.\n");

    if((opt = optget(opts, "MaxFileSize"))->active) {
	if((ret = cl_engine_set_num(engine, CL_ENGINE_MAX_FILESIZE, opt->numarg))) {
	    logg("!cl_engine_set_num(CL_ENGINE_MAX_FILESIZE) failed: %s\n", cl_strerror(ret));
	    cl_engine_free(engine);
	    return 1;
	}
    }
    val = cl_engine_get_num(engine, CL_ENGINE_MAX_FILESIZE, NULL);
    if(val)
    	logg("Limits: File size limit set to %llu bytes.\n", val);
    else
    	logg("^Limits: File size limit protection disabled.\n");

#ifndef _WIN32
    if(getrlimit(RLIMIT_FSIZE, &rlim) == 0) {
	if(rlim.rlim_cur < (rlim_t) cl_engine_get_num(engine, CL_ENGINE_MAX_FILESIZE, NULL))
	    logg("^System limit for file size is lower than engine->maxfilesize\n");
	if(rlim.rlim_cur < (rlim_t) cl_engine_get_num(engine, CL_ENGINE_MAX_SCANSIZE, NULL))
	    logg("^System limit for file size is lower than engine->maxscansize\n");
    } else {
	logg("^Cannot obtain resource limits for file size\n");
    }
#endif

    if((opt = optget(opts, "MaxRecursion"))->active) {
	if((ret = cl_engine_set_num(engine, CL_ENGINE_MAX_RECURSION, opt->numarg))) {
	    logg("!cl_engine_set_num(CL_ENGINE_MAX_RECURSION) failed: %s\n", cl_strerror(ret));
	    cl_engine_free(engine);
	    return 1;
	}
    }
    val = cl_engine_get_num(engine, CL_ENGINE_MAX_RECURSION, NULL);
    if(val)
    	logg("Limits: Recursion level limit set to %u.\n", (unsigned int) val);
    else
    	logg("^Limits: Recursion level limit protection disabled.\n");

    if((opt = optget(opts, "MaxFiles"))->active) {
	if((ret = cl_engine_set_num(engine, CL_ENGINE_MAX_FILES, opt->numarg))) {
	    logg("!cl_engine_set_num(CL_ENGINE_MAX_FILES) failed: %s\n", cl_strerror(ret));
	    cl_engine_free(engine);
	    return 1;
	}
    }
    val = cl_engine_get_num(engine, CL_ENGINE_MAX_FILES, NULL);
    if(val)
    	logg("Limits: Files limit set to %u.\n", (unsigned int) val);
    else
    	logg("^Limits: Files limit protection disabled.\n");

#ifndef _WIN32
    if (getrlimit(RLIMIT_CORE, &rlim) == 0) {
	logg("*Limits: Core-dump limit is %lu.\n", (unsigned long)rlim.rlim_cur);
    }
#endif

    /* Engine max sizes */

    if((opt = optget(opts, "MaxEmbeddedPE"))->active) {
        if((ret = cl_engine_set_num(engine, CL_ENGINE_MAX_EMBEDDEDPE, opt->numarg))) {
            logg("!cli_engine_set_num(CL_ENGINE_MAX_EMBEDDEDPE) failed: %s\n", cl_strerror(ret));
            cl_engine_free(engine);
            return 1;
        }
    }
    val = cl_engine_get_num(engine, CL_ENGINE_MAX_EMBEDDEDPE, NULL);
    logg("Limits: MaxEmbeddedPE limit set to %llu bytes.\n", val);

    if((opt = optget(opts, "MaxHTMLNormalize"))->active) {
        if((ret = cl_engine_set_num(engine, CL_ENGINE_MAX_HTMLNORMALIZE, opt->numarg))) {
            logg("!cli_engine_set_num(CL_ENGINE_MAX_HTMLNORMALIZE) failed: %s\n", cl_strerror(ret));
            cl_engine_free(engine);
            return 1;
        }
    }
    val = cl_engine_get_num(engine, CL_ENGINE_MAX_HTMLNORMALIZE, NULL);
    logg("Limits: MaxHTMLNormalize limit set to %llu bytes.\n", val);

    if((opt = optget(opts, "MaxHTMLNoTags"))->active) {
        if((ret = cl_engine_set_num(engine, CL_ENGINE_MAX_HTMLNOTAGS, opt->numarg))) {
            logg("!cli_engine_set_num(CL_ENGINE_MAX_HTMLNOTAGS) failed: %s\n", cl_strerror(ret));
            cl_engine_free(engine);
            return 1;
        }
    }
    val = cl_engine_get_num(engine, CL_ENGINE_MAX_HTMLNOTAGS, NULL);
    logg("Limits: MaxHTMLNoTags limit set to %llu bytes.\n", val);

    if((opt = optget(opts, "MaxScriptNormalize"))->active) {
        if((ret = cl_engine_set_num(engine, CL_ENGINE_MAX_SCRIPTNORMALIZE, opt->numarg))) {
            logg("!cli_engine_set_num(CL_ENGINE_MAX_SCRIPTNORMALIZE) failed: %s\n", cl_strerror(ret));
            cl_engine_free(engine);
            return 1;
        }
    }
    val = cl_engine_get_num(engine, CL_ENGINE_MAX_SCRIPTNORMALIZE, NULL);
    logg("Limits: MaxScriptNormalize limit set to %llu bytes.\n", val);

    if((opt = optget(opts, "MaxZipTypeRcg"))->active) {
        if((ret = cl_engine_set_num(engine, CL_ENGINE_MAX_ZIPTYPERCG, opt->numarg))) {
            logg("!cli_engine_set_num(CL_ENGINE_MAX_ZIPTYPERCG) failed: %s\n", cl_strerror(ret));
            cl_engine_free(engine);
            return 1;
        }
    }
    val = cl_engine_get_num(engine, CL_ENGINE_MAX_ZIPTYPERCG, NULL);
    logg("Limits: MaxZipTypeRcg limit set to %llu bytes.\n", val);

    if((opt = optget(opts, "MaxPartitions"))->active) {
        if((ret = cl_engine_set_num(engine, CL_ENGINE_MAX_PARTITIONS, opt->numarg))) {
            logg("!cli_engine_set_num(MaxPartitions) failed: %s\n", cl_strerror(ret));
            cl_engine_free(engine);
            return 1;
        }
    }
    val = cl_engine_get_num(engine, CL_ENGINE_MAX_PARTITIONS, NULL);
    logg("Limits: MaxPartitions limit set to %llu.\n", val);

    if((opt = optget(opts, "MaxIconsPE"))->active) {
        if((ret = cl_engine_set_num(engine, CL_ENGINE_MAX_ICONSPE, opt->numarg))) {
            logg("!cli_engine_set_num(MaxIconsPE) failed: %s\n", cl_strerror(ret));
            cl_engine_free(engine);
            return 1;
        }
    }
    val = cl_engine_get_num(engine, CL_ENGINE_MAX_ICONSPE, NULL);
    logg("Limits: MaxIconsPE limit set to %llu.\n", val);

    if((opt = optget(opts, "PCREMatchLimit"))->active) {
        if((ret = cl_engine_set_num(engine, CL_ENGINE_PCRE_MATCH_LIMIT, opt->numarg))) {
            logg("!cli_engine_set_num(PCREMatchLimit) failed: %s\n", cl_strerror(ret));
            cl_engine_free(engine);
            return 1;
        }
    }
    val = cl_engine_get_num(engine, CL_ENGINE_PCRE_MATCH_LIMIT, NULL);
    logg("Limits: PCREMatchLimit limit set to %llu.\n", val);

    if((opt = optget(opts, "PCRERecMatchLimit"))->active) {
        if((ret = cl_engine_set_num(engine, CL_ENGINE_PCRE_RECMATCH_LIMIT, opt->numarg))) {
            logg("!cli_engine_set_num(PCRERecMatchLimit) failed: %s\n", cl_strerror(ret));
            cl_engine_free(engine);
            return 1;
        }
    }
    val = cl_engine_get_num(engine, CL_ENGINE_PCRE_RECMATCH_LIMIT, NULL);
    logg("Limits: PCRERecMatchLimit limit set to %llu.\n", val);

    if((opt = optget(opts, "PCREMaxFileSize"))->active) {
        if((ret = cl_engine_set_num(engine, CL_ENGINE_PCRE_MAX_FILESIZE, opt->numarg))) {
            logg("!cli_engine_set_num(PCREMaxFileSize) failed: %s\n", cl_strerror(ret));
            cl_engine_free(engine);
            return 1;
        }
    }
    val = cl_engine_get_num(engine, CL_ENGINE_PCRE_MAX_FILESIZE, NULL);
    logg("Limits: PCREMaxFileSize limit set to %llu.\n", val);

    if(optget(opts, "ScanArchive")->enabled) {
	logg("Archive support enabled.\n");
	options |= CL_SCAN_ARCHIVE;

	if(optget(opts, "ArchiveBlockEncrypted")->enabled) {
	    logg("Archive: Blocking encrypted archives.\n");
	    options |= CL_SCAN_BLOCKENCRYPTED;
	}

    } else {
	logg("Archive support disabled.\n");
    }

    if(optget(opts, "AlgorithmicDetection")->enabled) {
	logg("Algorithmic detection enabled.\n");
	options |= CL_SCAN_ALGORITHMIC;
    } else {
	logg("Algorithmic detection disabled.\n");
    }

    if(optget(opts, "ScanPE")->enabled) {
	logg("Portable Executable support enabled.\n");
	options |= CL_SCAN_PE;
    } else {
	logg("Portable Executable support disabled.\n");
    }

    if(optget(opts, "ScanELF")->enabled) {
	logg("ELF support enabled.\n");
	options |= CL_SCAN_ELF;
    } else {
	logg("ELF support disabled.\n");
    }

    if(optget(opts, "ScanPE")->enabled || optget(opts, "ScanELF")->enabled) {
	if(optget(opts, "DetectBrokenExecutables")->enabled) {
	    logg("Detection of broken executables enabled.\n");
	    options |= CL_SCAN_BLOCKBROKEN;
	}
    }

    if(optget(opts, "ScanMail")->enabled) {
	logg("Mail files support enabled.\n");
	options |= CL_SCAN_MAIL;

	if(optget(opts, "ScanPartialMessages")->enabled) {
	    logg("Mail: RFC1341 handling enabled.\n");
	    options |= CL_SCAN_PARTIAL_MESSAGE;
	}

    } else {
	logg("Mail files support disabled.\n");
    }

    if(optget(opts, "ScanOLE2")->enabled) {
	logg("OLE2 support enabled.\n");
	options |= CL_SCAN_OLE2;
	if(optget(opts, "OLE2BlockMacros")->enabled) {
	    logg("OLE2: Blocking all VBA macros.\n");
	    options |= CL_SCAN_BLOCKMACROS;
	}
    } else {
	logg("OLE2 support disabled.\n");
    }

    if(optget(opts, "ScanPDF")->enabled) {
	logg("PDF support enabled.\n");
	options |= CL_SCAN_PDF;
    } else {
	logg("PDF support disabled.\n");
    }

    if(optget(opts, "ScanSWF")->enabled) {
	logg("SWF support enabled.\n");
	options |= CL_SCAN_SWF;
    } else {
	logg("SWF support disabled.\n");
    }

    if(optget(opts, "ScanHTML")->enabled) {
	logg("HTML support enabled.\n");
	options |= CL_SCAN_HTML;
    } else {
	logg("HTML support disabled.\n");
    }

    if(optget(opts,"PhishingScanURLs")->enabled) {

	if(optget(opts,"PhishingAlwaysBlockCloak")->enabled) {
	    options |= CL_SCAN_PHISHING_BLOCKCLOAK; 
	    logg("Phishing: Always checking for cloaked urls\n");
	}

	if(optget(opts,"PhishingAlwaysBlockSSLMismatch")->enabled) {
	    options |= CL_SCAN_PHISHING_BLOCKSSL;
	    logg("Phishing: Always checking for ssl mismatches\n");
	}
    }

    if(optget(opts,"PartitionIntersection")->enabled) {
        options |= CL_SCAN_PARTITION_INTXN;
        logg("Raw DMG: Always checking for partitons intersections\n");
    }

    if(optget(opts,"HeuristicScanPrecedence")->enabled) {
	    options |= CL_SCAN_HEURISTIC_PRECEDENCE;
	    logg("Heuristic: precedence enabled\n");
    }

    if(optget(opts, "StructuredDataDetection")->enabled) {
        options |= CL_SCAN_STRUCTURED;

	if((opt = optget(opts, "StructuredMinCreditCardCount"))->enabled) {
	    if((ret = cl_engine_set_num(engine, CL_ENGINE_MIN_CC_COUNT, opt->numarg))) {
		logg("!cl_engine_set_num(CL_ENGINE_MIN_CC_COUNT) failed: %s\n", cl_strerror(ret));
		cl_engine_free(engine);
		return 1;
	    }
	}
	val = cl_engine_get_num(engine, CL_ENGINE_MIN_CC_COUNT, NULL);
	logg("Structured: Minimum Credit Card Number Count set to %u\n", (unsigned int) val);

	if((opt = optget(opts, "StructuredMinSSNCount"))->enabled) {
	    if((ret = cl_engine_set_num(engine, CL_ENGINE_MIN_SSN_COUNT, opt->numarg))) {
		logg("!cl_engine_set_num(CL_ENGINE_MIN_SSN_COUNT) failed: %s\n", cl_strerror(ret));
		cl_engine_free(engine);
		return 1;
	    }
	}
	val = cl_engine_get_num(engine, CL_ENGINE_MIN_SSN_COUNT, NULL);
        logg("Structured: Minimum Social Security Number Count set to %u\n", (unsigned int) val);

        if(optget(opts, "StructuredSSNFormatNormal")->enabled)
            options |= CL_SCAN_STRUCTURED_SSN_NORMAL;

        if(optget(opts, "StructuredSSNFormatStripped")->enabled)
	    options |= CL_SCAN_STRUCTURED_SSN_STRIPPED;
    }

#ifdef HAVE__INTERNAL__SHA_COLLECT
    if(optget(opts, "DevCollectHashes")->enabled)
	options |= CL_SCAN_INTERNAL_COLLECT_SHA;
#endif

    selfchk = optget(opts, "SelfCheck")->numarg;
    if(!selfchk) {
	logg("Self checking disabled.\n");
    } else {
	logg("Self checking every %u seconds.\n", selfchk);
    }

    /* save the PID */
    mainpid = getpid();
    if((opt = optget(opts, "PidFile"))->enabled) {
	    FILE *fd;
	old_umask = umask(0002);
	if((fd = fopen(opt->strarg, "w")) == NULL) {
	    logg("!Can't save PID in file %s\n", opt->strarg);
	} else {
	    if (fprintf(fd, "%u\n", (unsigned int) mainpid)<0) {
	    	logg("!Can't save PID in file %s\n", opt->strarg);
	    }
	    fclose(fd);
	}
	umask(old_umask);
    }

    logg("*Listening daemon: PID: %u\n", (unsigned int) mainpid);
    max_threads = optget(opts, "MaxThreads")->numarg;
    max_queue = optget(opts, "MaxQueue")->numarg;
    acceptdata.commandtimeout = optget(opts, "CommandReadTimeout")->numarg;
    readtimeout = optget(opts, "ReadTimeout")->numarg;

#if !defined(_WIN32) && defined(RLIMIT_NOFILE)
    if (getrlimit(RLIMIT_NOFILE, &rlim) == 0) {
	/* don't warn if default value is too high, silently fix it */
	unsigned maxrec;
	int max_max_queue;
	unsigned warn = optget(opts, "MaxQueue")->active;
	const unsigned clamdfiles = 6;
	/* Condition to not run out of file descriptors:
	 * MaxThreads * MaxRecursion + (MaxQueue - MaxThreads) + CLAMDFILES < RLIMIT_NOFILE 
	 * CLAMDFILES is 6: 3 standard FD + logfile + 2 FD for reloading the DB
	 * */
#ifdef C_SOLARIS
#ifdef HAVE_ENABLE_EXTENDED_FILE_STDIO
	if (enable_extended_FILE_stdio(-1, -1) == -1) {
	    logg("^Unable to set extended FILE stdio, clamd will be limited to max 256 open files\n");
	    rlim.rlim_cur = rlim.rlim_cur > 255 ? 255 : rlim.rlim_cur;
	}
#elif !defined(_LP64)
	if (rlim.rlim_cur > 255) {
	    rlim.rlim_cur = 255;
	    logg("^Solaris only supports 256 open files for 32-bit processes, you need at least Solaris 10u4, or compile as 64-bit to support more!\n");
	}
#endif
#endif
	opt = optget(opts,"MaxRecursion");
	maxrec = opt->numarg;
	max_max_queue = rlim.rlim_cur - maxrec * max_threads - clamdfiles + max_threads;
	if (max_queue < max_threads) {
	    max_queue = max_threads;
	    if (warn)
		logg("^MaxQueue value too low, increasing to: %d\n", max_queue);
	}
	if (max_max_queue < max_threads) {
	    logg("^MaxThreads * MaxRecursion is too high: %d, open file descriptor limit is: %lu\n",
		 maxrec*max_threads, (unsigned long)rlim.rlim_cur);
	    max_max_queue = max_threads;
	}
	if (max_queue > max_max_queue) {
	    max_queue = max_max_queue;
	    if (warn)
		logg("^MaxQueue value too high, lowering to: %d\n", max_queue);
	} else if (max_queue < 2*max_threads && max_queue < max_max_queue) {
	    max_queue = 2*max_threads;
	    if (max_queue > max_max_queue)
		max_queue = max_max_queue;
	    /* always warn here */
	    logg("^MaxQueue is lower than twice MaxThreads, increasing to: %d\n", max_queue);
	}
    }
#endif
    logg("*MaxQueue set to: %d\n", max_queue);
    acceptdata.max_queue = max_queue;

    if(optget(opts, "ScanOnAccess")->enabled)

#if defined(FANOTIFY) || defined(CLAMAUTH)
    {
        do {
	    if(pthread_attr_init(&fan_attr)) break;
	    pthread_attr_setdetachstate(&fan_attr, PTHREAD_CREATE_JOINABLE);
	    if(!(tharg = (struct thrarg *) malloc(sizeof(struct thrarg)))) break;
	    tharg->opts = opts;
	    tharg->engine = engine;
	    tharg->options = options;
	    if(!pthread_create(&fan_pid, &fan_attr, onas_fan_th, tharg)) break;
	    free(tharg);
	    tharg=NULL;
	} while(0);
	if (!tharg) logg("!Unable to start on-access scan\n");
    }
#else
	logg("!On-access scan is not available\n");
#endif


#ifndef	_WIN32
    /* set up signal handling */
    sigfillset(&sigset);
    sigdelset(&sigset, SIGINT);
    sigdelset(&sigset, SIGTERM);
    sigdelset(&sigset, SIGSEGV);
    sigdelset(&sigset, SIGHUP);
    sigdelset(&sigset, SIGPIPE);
    sigdelset(&sigset, SIGUSR2);
    /* The behavior of a process is undefined after it ignores a 
     * SIGFPE, SIGILL, SIGSEGV, or SIGBUS signal */
    sigdelset(&sigset, SIGFPE);
    sigdelset(&sigset, SIGILL);
    sigdelset(&sigset, SIGSEGV);
#ifdef SIGBUS    
    sigdelset(&sigset, SIGBUS);
#endif
    sigdelset(&sigset, SIGTSTP);
    sigdelset(&sigset, SIGCONT);
    sigprocmask(SIG_SETMASK, &sigset, NULL);

    /* SIGINT, SIGTERM, SIGSEGV */
    sigact.sa_handler = sighandler_th;
    sigemptyset(&sigact.sa_mask);
    sigaddset(&sigact.sa_mask, SIGINT);
    sigaddset(&sigact.sa_mask, SIGTERM);
    sigaddset(&sigact.sa_mask, SIGHUP);
    sigaddset(&sigact.sa_mask, SIGPIPE);
    sigaddset(&sigact.sa_mask, SIGUSR2);
    sigaction(SIGINT, &sigact, NULL);
    sigaction(SIGTERM, &sigact, NULL);
    sigaction(SIGHUP, &sigact, NULL);
    sigaction(SIGPIPE, &sigact, NULL);
    sigaction(SIGUSR2, &sigact, NULL);
#endif

    idletimeout = optget(opts, "IdleTimeout")->numarg;

    for (i=0;i < nsockets;i++)
	if (fds_add(&acceptdata.fds, socketds[i], 1, 0) == -1) {
	    logg("!fds_add failed\n");
	    cl_engine_free(engine);
	    return 1;
	}
#ifdef _WIN32
	event_wake_accept = CreateEvent(NULL, TRUE, FALSE, NULL);
	event_wake_recv = CreateEvent(NULL, TRUE, FALSE, NULL);
#else
    if (pipe(acceptdata.syncpipe_wake_recv) == -1 ||
	(pipe(acceptdata.syncpipe_wake_accept) == -1)) {

	logg("!pipe failed\n");
	exit(-1);
    }
    syncpipe_wake_recv_w = acceptdata.syncpipe_wake_recv[1];

    if (fds_add(fds, acceptdata.syncpipe_wake_recv[0], 1, 0) == -1 ||
	fds_add(&acceptdata.fds, acceptdata.syncpipe_wake_accept[0], 1, 0)) {
	logg("!failed to add pipe fd\n");
	exit(-1);
    }
#endif

    if ((thr_pool = thrmgr_new(max_threads, idletimeout, max_queue, scanner_thread)) == NULL) {
	logg("!thrmgr_new failed\n");
	exit(-1);
    }

    if (pthread_create(&accept_th, NULL, acceptloop_th, &acceptdata)) {
	logg("!pthread_create failed\n");
	exit(-1);
    }

    time(&start_time);
    for(;;) {
	int new_sd;

	/* Block waiting for connection on any of the sockets */
	pthread_mutex_lock(fds->buf_mutex);
	fds_cleanup(fds);
	/* signal that we can accept more connections */
	if (fds->nfds <= (unsigned)max_queue)
	    pthread_cond_signal(&acceptdata.cond_nfds);
	new_sd = fds_poll_recv(fds, selfchk ? (int)selfchk : -1, 1, event_wake_recv);
#ifdef _WIN32
	ResetEvent(event_wake_recv);
#else
	if (!fds->nfds) {
	    /* at least the dummy/sync pipe should have remained */
	    logg("!All recv() descriptors gone: fatal\n");
	    pthread_mutex_lock(&exit_mutex);
	    progexit = 1;
	    pthread_mutex_unlock(&exit_mutex);
	    pthread_mutex_unlock(fds->buf_mutex);
	    break;
	}
#endif
	if (new_sd == -1 && errno != EINTR) {
	    logg("!Failed to poll sockets, fatal\n");
	    pthread_mutex_lock(&exit_mutex);
	    progexit = 1;
	    pthread_mutex_unlock(&exit_mutex);
	}


	if(fds->nfds) i = (rr_last + 1) % fds->nfds;
	for (j = 0;  j < fds->nfds && new_sd >= 0; j++, i = (i+1) % fds->nfds) {
	    size_t pos = 0;
	    int error = 0;
	    struct fd_buf *buf = &fds->buf[i];
	    if (!buf->got_newdata)
		continue;

#ifndef _WIN32
	    if (buf->fd == acceptdata.syncpipe_wake_recv[0]) {
		/* dummy sync pipe, just to wake us */
		if (read(buf->fd, buff, sizeof(buff)) < 0) {
		    logg("^Syncpipe read failed\n");
		}
		continue;
	    }
#endif
	    if (buf->got_newdata == -1) {
		if (buf->mode == MODE_WAITREPLY) {
		    logg("$mode WAIT_REPLY -> closed\n");
		    buf->fd = -1;
		    thrmgr_group_terminate(buf->group);
		    thrmgr_group_finished(buf->group, EXIT_ERROR);
		    continue;
		} else {
		    logg("$client read error or EOF on read\n");
		    error = 1;
		}
	    }

	    if (buf->fd != -1 && buf->got_newdata == -2) {
		logg("$Client read timed out\n");
		mdprintf(buf->fd, "COMMAND READ TIMED OUT\n");
		error = 1;
	    }

	    rr_last = i;
	    if (buf->mode == MODE_WAITANCILL) {
		buf->mode = MODE_COMMAND;
		logg("$mode -> MODE_COMMAND\n");
	    }
	    while (!error && buf->fd != -1 && buf->buffer && pos < buf->off &&
		   buf->mode != MODE_WAITANCILL) {
		client_conn_t conn;
		const char *cmd = NULL;
		int rc;
		/* New data available to read on socket. */

		memset(&conn, 0, sizeof(conn));
		conn.scanfd = buf->recvfd;
		buf->recvfd = -1;
		conn.sd = buf->fd;
		conn.options = options;
		conn.opts = opts;
		conn.thrpool = thr_pool;
		conn.engine = engine;
		conn.group = buf->group;
		conn.id = buf->id;
		conn.quota = buf->quota;
		conn.filename = buf->dumpname;
		conn.mode = buf->mode;
		conn.term = buf->term;

		/* Parse & dispatch command */
		cmd = parse_dispatch_cmd(&conn, buf, &pos, &error, opts, readtimeout);

		if (conn.mode == MODE_COMMAND && !cmd)
		    break;
		if (!error) {
		    if (buf->mode == MODE_WAITREPLY && buf->off) {
			/* Client is not supposed to send anything more */
			logg("^Client sent garbage after last command: %lu bytes\n", (unsigned long)buf->off);
			buf->buffer[buf->off] = '\0';
			logg("$Garbage: %s\n", buf->buffer);
			error = 1;
		    } else if (buf->mode == MODE_STREAM) {
			rc = handle_stream(&conn, buf, opts, &error, &pos, readtimeout);
			if (rc == -1)
			    break;
			else
			    continue;
		    }
		}
		if (error && error != CL_ETIMEOUT) {
		    conn_reply_error(&conn, "Error processing command.");
		}
	    }
	    if (error) {
		if (buf->dumpfd != -1) {
		    close(buf->dumpfd);
		    if (buf->dumpname) {
			cli_unlink(buf->dumpname);
			free(buf->dumpname);
		    }
		    buf->dumpfd = -1;
		}
		thrmgr_group_terminate(buf->group);
		if (thrmgr_group_finished(buf->group, EXIT_ERROR)) {
		    if (buf->fd < 0) {
			logg("$Skipping shutdown of bad socket after error (FD %d)\n", buf->fd);
		    }
		    else {
			logg("$Shutting down socket after error (FD %d)\n", buf->fd);
			shutdown(buf->fd, 2);
			closesocket(buf->fd);
		    }
		} else
		    logg("$Socket not shut down due to active tasks\n");
		buf->fd = -1;
	    }
	}
	pthread_mutex_unlock(fds->buf_mutex);

	/* handle progexit */
	pthread_mutex_lock(&exit_mutex);
	if (progexit) {
	    pthread_mutex_unlock(&exit_mutex);
	    pthread_mutex_lock(fds->buf_mutex);
	    for (i=0;i < fds->nfds; i++) {
		if (fds->buf[i].fd == -1)
		    continue;
		thrmgr_group_terminate(fds->buf[i].group);
		if (thrmgr_group_finished(fds->buf[i].group, EXIT_ERROR)) {
		    logg("$Shutdown closed fd %d\n", fds->buf[i].fd);
		    shutdown(fds->buf[i].fd, 2);
		    closesocket(fds->buf[i].fd);
		    fds->buf[i].fd = -1;
		}
	    }
	    pthread_mutex_unlock(fds->buf_mutex);
	    break;
	}
	pthread_mutex_unlock(&exit_mutex);

	/* SIGHUP */
	if (sighup) {
	    logg("SIGHUP caught: re-opening log file.\n");
	    logg_close();
	    sighup = 0;
	    if(!logg_file && (opt = optget(opts, "LogFile"))->enabled)
		logg_file = opt->strarg;
	}

	/* SelfCheck */
	if(selfchk) {
	    time(&current_time);
	    if((current_time - start_time) >= (time_t)selfchk) {
		if(reload_db(engine, dboptions, opts, TRUE, &ret)) {
		    pthread_mutex_lock(&reload_mutex);
		    reload = 1;
		    pthread_mutex_unlock(&reload_mutex);
		}
		time(&start_time);
	    }
	}

	/* DB reload */
	pthread_mutex_lock(&reload_mutex);
	if(reload) {
	    pthread_mutex_unlock(&reload_mutex);

	    engine = reload_db(engine, dboptions, opts, FALSE, &ret);
	    if(ret) {
		logg("Terminating because of a fatal error.\n");
		if(new_sd >= 0)
		    closesocket(new_sd);
		break;
	    }

	    pthread_mutex_lock(&reload_mutex);
	    reload = 0;
	    time(&reloaded_time);
	    pthread_mutex_unlock(&reload_mutex);

#if defined(FANOTIFY) || defined(CLAMAUTH)
	    if(optget(opts, "ScanOnAccess")->enabled && tharg) {
		tharg->engine = engine;
	    }
#endif
	    time(&start_time);
	} else {
	    pthread_mutex_unlock(&reload_mutex);
	}
    }

    pthread_mutex_lock(&exit_mutex);
    progexit = 1;
    pthread_mutex_unlock(&exit_mutex);
#ifdef _WIN32
    SetEvent(event_wake_accept);
#else
    if (write(acceptdata.syncpipe_wake_accept[1], "", 1) < 0) {
	logg("^Write to syncpipe failed\n");
    }
#endif
    /* Destroy the thread manager.
     * This waits for all current tasks to end
     */
    logg("*Waiting for all threads to finish\n");
    thrmgr_destroy(thr_pool);
#if defined(FANOTIFY) || defined(CLAMAUTH)
    if(optget(opts, "ScanOnAccess")->enabled && tharg) {
	logg("Stopping on-access scan\n");
	pthread_mutex_lock(&logg_mutex);
	pthread_kill(fan_pid, SIGUSR1);
	pthread_mutex_unlock(&logg_mutex);
	pthread_join(fan_pid, NULL);
    free(tharg);
    }
#endif
    if(engine) {
	thrmgr_setactiveengine(NULL);
	cl_engine_free(engine);
    }

    pthread_join(accept_th, NULL);
    fds_free(fds);
    pthread_mutex_destroy(fds->buf_mutex);
    pthread_cond_destroy(&acceptdata.cond_nfds);
#ifdef _WIN32
    CloseHandle(event_wake_accept);
    CloseHandle(event_wake_recv);
#else
    close(acceptdata.syncpipe_wake_accept[1]);
    close(acceptdata.syncpipe_wake_recv[1]);
#endif
    if(dbstat.entries)
	cl_statfree(&dbstat);
    logg("*Shutting down the main socket%s.\n", (nsockets > 1) ? "s" : "");
    for (i = 0; i < nsockets; i++)
	shutdown(socketds[i], 2);

    if((opt = optget(opts, "PidFile"))->enabled) {
	if(unlink(opt->strarg) == -1)
	    logg("!Can't unlink the pid file %s\n", opt->strarg);
	else
	    logg("Pid file removed.\n");
    }

    time(&current_time);
    logg("--- Stopped at %s", cli_ctime(&current_time, timestr, sizeof(timestr)));

    return ret;
} 
Exemple #3
0
static void *acceptloop_th(void *arg)
{
    char buff[BUFFSIZE + 1];
    size_t i;
    struct acceptdata *data = (struct acceptdata*)arg;
    struct fd_data *fds = &data->fds;
    struct fd_data *recv_fds = &data->recv_fds;
    int max_queue = data->max_queue;
    int commandtimeout = data->commandtimeout;

    pthread_mutex_lock(fds->buf_mutex);
    for (;;) {
	/* Block waiting for data to become available for reading */
	int new_sd = fds_poll_recv(fds, -1, 0, event_wake_accept);
#ifdef _WIN32
	ResetEvent(event_wake_accept);
#endif
	/* TODO: what about sockets that get rm-ed? */
	if (!fds->nfds) {
	    /* no more sockets to poll, all gave an error */
	    logg("!Main socket gone: fatal\n");
	    break;
	}

	if (new_sd == -1 && errno != EINTR) {
	    logg("!Failed to poll sockets, fatal\n");
	    pthread_mutex_lock(&exit_mutex);
	    progexit = 1;
	    pthread_mutex_unlock(&exit_mutex);
	    break;
	}

	/* accept() loop */
	for (i=0;i < fds->nfds && new_sd >= 0; i++) {
	    struct fd_buf *buf = &fds->buf[i];
	    if (!buf->got_newdata)
		continue;
#ifndef _WIN32
	    if (buf->fd == data->syncpipe_wake_accept[0]) {
		/* dummy sync pipe, just to wake us */
		if (read(buf->fd, buff, sizeof(buff)) < 0) {
		    logg("^Syncpipe read failed\n");
		}
		continue;
	    }
#endif
	    if (buf->got_newdata == -1) {
		logg("$Acceptloop closed FD: %d\n", buf->fd);
		shutdown(buf->fd, 2);
		closesocket(buf->fd);
		buf->fd = -1;
		continue;
	    }

	    /* don't accept unlimited number of connections, or
	     * we'll run out of file descriptors */
	    pthread_mutex_lock(recv_fds->buf_mutex);
	    while (recv_fds->nfds > (unsigned)max_queue) {
		pthread_mutex_lock(&exit_mutex);
		if(progexit) {
		    pthread_mutex_unlock(&exit_mutex);
		    break;
		}
		pthread_mutex_unlock(&exit_mutex);
		pthread_cond_wait(&data->cond_nfds, recv_fds->buf_mutex);
	    }
	    pthread_mutex_unlock(recv_fds->buf_mutex);

	    pthread_mutex_lock(&exit_mutex);
	    if(progexit) {
		pthread_mutex_unlock(&exit_mutex);
		break;
	    }
	    pthread_mutex_unlock(&exit_mutex);

	    /* listen only socket */
	    new_sd = accept(fds->buf[i].fd, NULL, NULL);

	    if (new_sd >= 0) {
		int ret, flags;
#ifdef F_GETFL
		flags = fcntl(new_sd, F_GETFL, 0);
		if (flags != -1) {
		    if (fcntl(new_sd, F_SETFL, flags | O_NONBLOCK) == -1) {
			logg("^Can't set socket to nonblocking mode, errno %d\n",
			     errno);
		    }
		} else {
			logg("^Can't get socket flags, errno %d\n", errno);
		}
#else
		logg("^Nonblocking sockets not available!\n");
#endif
		logg("$Got new connection, FD %d\n", new_sd);
		pthread_mutex_lock(recv_fds->buf_mutex);
		ret = fds_add(recv_fds, new_sd, 0, commandtimeout);
		pthread_mutex_unlock(recv_fds->buf_mutex);

		if (ret == -1) {
		    logg("!fds_add failed\n");
		    closesocket(new_sd);
		    continue;
		}

		/* notify recvloop */
#ifdef _WIN32
		SetEvent(event_wake_recv);
#else
		if (write(data->syncpipe_wake_recv[1], "", 1) == -1) {
		    logg("!write syncpipe failed\n");
		    continue;
		}
#endif
	    } else if (errno != EINTR) {
		/* very bad - need to exit or restart */
#ifdef HAVE_STRERROR_R
		strerror_r(errno, buff, BUFFSIZE);
		logg("!accept() failed: %s\n", buff);
#else
		logg("!accept() failed\n");
#endif
		/* give the poll loop a chance to close disconnected FDs */
		break;
	    }

	}

	/* handle progexit */
	pthread_mutex_lock(&exit_mutex);
	if (progexit) {
	    pthread_mutex_unlock(&exit_mutex);
	    break;
	}
	pthread_mutex_unlock(&exit_mutex);
    }
    pthread_mutex_unlock(fds->buf_mutex);

    for (i=0;i < fds->nfds; i++) {
	if (fds->buf[i].fd == -1)
	    continue;
	logg("$Shutdown: closed fd %d\n", fds->buf[i].fd);
	shutdown(fds->buf[i].fd, 2);
	closesocket(fds->buf[i].fd);
    }
    fds_free(fds);
    pthread_mutex_destroy(fds->buf_mutex);
    pthread_mutex_lock(&exit_mutex);
    progexit = 1;
    pthread_mutex_unlock(&exit_mutex);
#ifdef _WIN32
    SetEvent(event_wake_recv);
#else
    if (write(data->syncpipe_wake_recv[1], "", 1) < 0) {
	logg("$Syncpipe write failed\n");
    }
#endif
    return NULL;
}