int QgsMapToolCapture::addVertex( const QgsPointXY &point, const QgsPointLocator::Match &match )
{
if ( mode() == CaptureNone )
{
QgsDebugMsg( QStringLiteral( "invalid capture mode" ) );
return 2;
}
int res;
QgsPoint layerPoint;
res = fetchLayerPoint( match, layerPoint );
if ( res != 0 )
{
res = nextPoint( QgsPoint( point ), layerPoint );
if ( res != 0 )
{
return res;
}
}
if ( !mRubberBand )
{
mRubberBand = createRubberBand( mCaptureMode == CapturePolygon ? QgsWkbTypes::PolygonGeometry : QgsWkbTypes::LineGeometry );
}
if ( !mTempRubberBand )
{
mTempRubberBand = createRubberBand( mCaptureMode == CapturePolygon ? QgsWkbTypes::PolygonGeometry : QgsWkbTypes::LineGeometry, true );
}
else
{
mTempRubberBand->reset( mCaptureMode == CapturePolygon ? QgsWkbTypes::PolygonGeometry : QgsWkbTypes::LineGeometry );
}
bool traceCreated = false;
if ( tracingEnabled() )
{
traceCreated = tracingAddVertex( point );
}
// keep new tracing start point if we created a trace. This is useful when tracing with
// offset so that the user stays "snapped"
mTracingStartPoint = traceCreated ? point : QgsPointXY();
if ( !traceCreated )
{
// ordinary digitizing
mRubberBand->addPoint( point );
mCaptureCurve.addVertex( layerPoint );
mSnappingMatches.append( match );
}
if ( mCaptureMode == CaptureLine )
{
mTempRubberBand->addPoint( point );
}
else if ( mCaptureMode == CapturePolygon )
{
const QgsPointXY *firstPoint = mRubberBand->getPoint( 0, 0 );
mTempRubberBand->addPoint( *firstPoint );
mTempRubberBand->movePoint( point );
mTempRubberBand->addPoint( point );
}
validateGeometry();
return 0;
}
void QgsMapToolDigitizeFeature::cadCanvasReleaseEvent( QgsMapMouseEvent *e )
{
QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( mLayer );
if ( !vlayer )
//if no given layer take the current from canvas
vlayer = currentVectorLayer();
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
QgsWkbTypes::Type layerWKBType = vlayer->wkbType();
QgsVectorDataProvider *provider = vlayer->dataProvider();
if ( !( provider->capabilities() & QgsVectorDataProvider::AddFeatures ) )
{
emit messageEmitted( tr( "The data provider for this layer does not support the addition of features." ), Qgis::Warning );
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
// POINT CAPTURING
if ( mode() == CapturePoint )
{
if ( e->button() != Qt::LeftButton )
return;
//check we only use this tool for point/multipoint layers
if ( vlayer->geometryType() != QgsWkbTypes::PointGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture point' tool on this vector layer" ), Qgis::Warning );
return;
}
QgsPointXY savePoint; //point in layer coordinates
try
{
QgsPoint fetchPoint;
int res;
res = fetchLayerPoint( e->mapPointMatch(), fetchPoint );
if ( res == 0 )
{
savePoint = QgsPointXY( fetchPoint.x(), fetchPoint.y() );
}
else
{
savePoint = toLayerCoordinates( vlayer, e->mapPoint() );
}
QgsDebugMsg( "savePoint = " + savePoint.toString() );
}
catch ( QgsCsException &cse )
{
Q_UNUSED( cse );
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), Qgis::Warning );
return;
}
//only do the rest for provider with feature addition support
//note that for the grass provider, this will return false since
//grass provider has its own mechanism of feature addition
if ( provider->capabilities() & QgsVectorDataProvider::AddFeatures )
{
QgsFeature f( vlayer->fields(), 0 );
QgsGeometry g;
if ( layerWKBType == QgsWkbTypes::Point )
{
g = QgsGeometry::fromPointXY( savePoint );
}
else if ( !QgsWkbTypes::isMultiType( layerWKBType ) && QgsWkbTypes::hasZ( layerWKBType ) )
{
g = QgsGeometry( new QgsPoint( QgsWkbTypes::PointZ, savePoint.x(), savePoint.y(), defaultZValue() ) );
}
else if ( QgsWkbTypes::isMultiType( layerWKBType ) && !QgsWkbTypes::hasZ( layerWKBType ) )
{
g = QgsGeometry::fromMultiPointXY( QgsMultiPointXY() << savePoint );
}
else if ( QgsWkbTypes::isMultiType( layerWKBType ) && QgsWkbTypes::hasZ( layerWKBType ) )
{
QgsMultiPoint *mp = new QgsMultiPoint();
mp->addGeometry( new QgsPoint( QgsWkbTypes::PointZ, savePoint.x(), savePoint.y(), defaultZValue() ) );
g = QgsGeometry( mp );
}
else
{
// if layer supports more types (mCheckGeometryType is false)
g = QgsGeometry::fromPointXY( savePoint );
}
if ( QgsWkbTypes::hasM( layerWKBType ) )
{
g.get()->addMValue();
}
f.setGeometry( g );
f.setValid( true );
digitized( f );
// we are done with digitizing for now so instruct advanced digitizing dock to reset its CAD points
cadDockWidget()->clearPoints();
}
}
// LINE AND POLYGON CAPTURING
else if ( mode() == CaptureLine || mode() == CapturePolygon )
{
//check we only use the line tool for line/multiline layers
if ( mode() == CaptureLine && vlayer->geometryType() != QgsWkbTypes::LineGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture line' tool on this vector layer" ), Qgis::Warning );
return;
}
//check we only use the polygon tool for polygon/multipolygon layers
if ( mode() == CapturePolygon && vlayer->geometryType() != QgsWkbTypes::PolygonGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture polygon' tool on this vector layer" ), Qgis::Warning );
return;
}
//add point to list and to rubber band
if ( e->button() == Qt::LeftButton )
{
int error = addVertex( e->mapPoint(), e->mapPointMatch() );
if ( error == 1 )
{
//current layer is not a vector layer
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), Qgis::Warning );
return;
}
startCapturing();
}
else if ( e->button() == Qt::RightButton )
{
// End of string
deleteTempRubberBand();
//lines: bail out if there are not at least two vertices
if ( mode() == CaptureLine && size() < 2 )
{
stopCapturing();
return;
}
//polygons: bail out if there are not at least two vertices
if ( mode() == CapturePolygon && size() < 3 )
{
stopCapturing();
return;
}
if ( mode() == CapturePolygon )
{
closePolygon();
}
//create QgsFeature with wkb representation
std::unique_ptr< QgsFeature > f( new QgsFeature( vlayer->fields(), 0 ) );
//does compoundcurve contain circular strings?
//does provider support circular strings?
bool hasCurvedSegments = captureCurve()->hasCurvedSegments();
bool providerSupportsCurvedSegments = vlayer->dataProvider()->capabilities() & QgsVectorDataProvider::CircularGeometries;
QList<QgsPointLocator::Match> snappingMatchesList;
QgsCurve *curveToAdd = nullptr;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
curveToAdd = captureCurve()->clone();
}
else
{
curveToAdd = captureCurve()->curveToLine();
snappingMatchesList = snappingMatches();
}
if ( mode() == CaptureLine )
{
QgsGeometry g( curveToAdd );
f->setGeometry( g );
}
else
{
QgsCurvePolygon *poly = nullptr;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
poly = new QgsCurvePolygon();
}
else
{
poly = new QgsPolygon();
}
poly->setExteriorRing( curveToAdd );
QgsGeometry g( poly );
f->setGeometry( g );
QgsGeometry featGeom = f->geometry();
int avoidIntersectionsReturn = featGeom.avoidIntersections( QgsProject::instance()->avoidIntersectionsLayers() );
f->setGeometry( featGeom );
if ( avoidIntersectionsReturn == 1 )
{
//not a polygon type. Impossible to get there
}
if ( f->geometry().isEmpty() ) //avoid intersection might have removed the whole geometry
{
emit messageEmitted( tr( "The feature cannot be added because it's geometry collapsed due to intersection avoidance" ), Qgis::Critical );
stopCapturing();
return;
}
}
f->setValid( true );
digitized( *f );
stopCapturing();
}
}
}
void QgsMapToolAddFeature::cadCanvasReleaseEvent( QgsMapMouseEvent* e )
{
QgsVectorLayer* vlayer = currentVectorLayer();
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
QgsWkbTypes::Type layerWKBType = vlayer->wkbType();
QgsVectorDataProvider* provider = vlayer->dataProvider();
if ( !( provider->capabilities() & QgsVectorDataProvider::AddFeatures ) )
{
emit messageEmitted( tr( "The data provider for this layer does not support the addition of features." ), QgsMessageBar::WARNING );
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
// POINT CAPTURING
if ( mode() == CapturePoint )
{
if ( e->button() != Qt::LeftButton )
return;
//check we only use this tool for point/multipoint layers
if ( vlayer->geometryType() != QgsWkbTypes::PointGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture point' tool on this vector layer" ), QgsMessageBar::WARNING );
return;
}
QgsPoint savePoint; //point in layer coordinates
try
{
QgsPointV2 fetchPoint;
int res;
res = fetchLayerPoint( e->mapPointMatch(), fetchPoint );
if ( res == 0 )
{
savePoint = QgsPoint( fetchPoint.x(), fetchPoint.y() );
}
else
{
savePoint = toLayerCoordinates( vlayer, e->mapPoint() );
}
QgsDebugMsg( "savePoint = " + savePoint.toString() );
}
catch ( QgsCsException &cse )
{
Q_UNUSED( cse );
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), QgsMessageBar::WARNING );
return;
}
//only do the rest for provider with feature addition support
//note that for the grass provider, this will return false since
//grass provider has its own mechanism of feature addition
if ( provider->capabilities() & QgsVectorDataProvider::AddFeatures )
{
QgsFeature f( vlayer->fields(), 0 );
QgsGeometry g;
if ( layerWKBType == QgsWkbTypes::Point )
{
g = QgsGeometry::fromPoint( savePoint );
}
else if ( layerWKBType == QgsWkbTypes::Point25D )
{
g = QgsGeometry( new QgsPointV2( QgsWkbTypes::PointZ, savePoint.x(), savePoint.y(), 0.0 ) );
}
else if ( layerWKBType == QgsWkbTypes::MultiPoint )
{
g = QgsGeometry::fromMultiPoint( QgsMultiPoint() << savePoint );
}
else if ( layerWKBType == QgsWkbTypes::MultiPoint25D )
{
QgsMultiPointV2* mp = new QgsMultiPointV2();
mp->addGeometry( new QgsPointV2( QgsWkbTypes::PointZ, savePoint.x(), savePoint.y(), 0.0 ) );
g = QgsGeometry( mp );
}
else
{
// if layer supports more types (mCheckGeometryType is false)
g = QgsGeometry::fromPoint( savePoint );
}
f.setGeometry( g );
f.setValid( true );
addFeature( vlayer, &f, false );
vlayer->triggerRepaint();
}
}
// LINE AND POLYGON CAPTURING
else if ( mode() == CaptureLine || mode() == CapturePolygon )
{
//check we only use the line tool for line/multiline layers
if ( mode() == CaptureLine && vlayer->geometryType() != QgsWkbTypes::LineGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture line' tool on this vector layer" ), QgsMessageBar::WARNING );
return;
}
//check we only use the polygon tool for polygon/multipolygon layers
if ( mode() == CapturePolygon && vlayer->geometryType() != QgsWkbTypes::PolygonGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture polygon' tool on this vector layer" ), QgsMessageBar::WARNING );
return;
}
//add point to list and to rubber band
if ( e->button() == Qt::LeftButton )
{
int error = addVertex( e->mapPoint(), e->mapPointMatch() );
if ( error == 1 )
{
//current layer is not a vector layer
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), QgsMessageBar::WARNING );
return;
}
startCapturing();
}
else if ( e->button() == Qt::RightButton )
{
// End of string
deleteTempRubberBand();
//lines: bail out if there are not at least two vertices
if ( mode() == CaptureLine && size() < 2 )
{
stopCapturing();
return;
}
//polygons: bail out if there are not at least two vertices
if ( mode() == CapturePolygon && size() < 3 )
{
stopCapturing();
return;
}
if ( mode() == CapturePolygon )
{
closePolygon();
}
//create QgsFeature with wkb representation
QScopedPointer< QgsFeature > f( new QgsFeature( vlayer->fields(), 0 ) );
//does compoundcurve contain circular strings?
//does provider support circular strings?
bool hasCurvedSegments = captureCurve()->hasCurvedSegments();
bool providerSupportsCurvedSegments = vlayer->dataProvider()->capabilities() & QgsVectorDataProvider::CircularGeometries;
QgsCurve* curveToAdd = nullptr;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
curveToAdd = captureCurve()->clone();
}
else
{
curveToAdd = captureCurve()->curveToLine();
}
if ( mode() == CaptureLine )
{
QgsGeometry* g = new QgsGeometry( curveToAdd );
f->setGeometry( *g );
delete g;
}
else
{
QgsCurvePolygon* poly = nullptr;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
poly = new QgsCurvePolygon();
}
else
{
poly = new QgsPolygonV2();
}
poly->setExteriorRing( curveToAdd );
QgsGeometry* g = new QgsGeometry( poly );
f->setGeometry( *g );
delete g;
QgsGeometry featGeom = f->geometry();
int avoidIntersectionsReturn = featGeom.avoidIntersections();
f->setGeometry( featGeom );
if ( avoidIntersectionsReturn == 1 )
{
//not a polygon type. Impossible to get there
}
if ( f->geometry().isGeosEmpty() ) //avoid intersection might have removed the whole geometry
{
emit messageEmitted( tr( "The feature cannot be added because it's geometry collapsed due to intersection avoidance" ), QgsMessageBar::CRITICAL );
stopCapturing();
return;
}
}
f->setValid( true );
if ( addFeature( vlayer, f.data(), false ) )
{
//add points to other features to keep topology up-to-date
int topologicalEditing = QgsProject::instance()->readNumEntry( "Digitizing", "/TopologicalEditing", 0 );
//use always topological editing for avoidIntersection.
//Otherwise, no way to guarantee the geometries don't have a small gap in between.
QStringList intersectionLayers = QgsProject::instance()->readListEntry( "Digitizing", "/AvoidIntersectionsList" );
bool avoidIntersection = !intersectionLayers.isEmpty();
if ( avoidIntersection ) //try to add topological points also to background layers
{
QStringList::const_iterator lIt = intersectionLayers.constBegin();
for ( ; lIt != intersectionLayers.constEnd(); ++lIt )
{
QgsMapLayer* ml = QgsMapLayerRegistry::instance()->mapLayer( *lIt );
QgsVectorLayer* vl = qobject_cast<QgsVectorLayer*>( ml );
//can only add topological points if background layer is editable...
if ( vl && vl->geometryType() == QgsWkbTypes::PolygonGeometry && vl->isEditable() )
{
vl->addTopologicalPoints( f->geometry() );
}
}
}
else if ( topologicalEditing )
{
vlayer->addTopologicalPoints( f->geometry() );
}
}
stopCapturing();
}
}
}
