int tcpclo(int a1, int a2, int a3, int a4, int a5,
int a6, int a7, int a8, int a9, int a10)
{
char *ductName = (char *) a1;
#else
int main(int argc, char *argv[])
{
char *ductName = (argc > 1 ? argv[1] : NULL);
#endif
unsigned char *buffer;
VOutduct *vduct;
PsmAddress vductElt;
Sdr sdr;
Outduct duct;
ClProtocol protocol;
Outflow outflows[3];
int i;
char *hostName;
unsigned short portNbr;
unsigned int hostNbr;
struct sockaddr socketName;
struct sockaddr_in *inetName;
int running = 1;
pthread_mutex_t mutex;
KeepaliveThreadParms parms;
ReceiveThreadParms rparms;
pthread_t keepaliveThread;
pthread_t receiverThread;
Object bundleZco;
BpExtendedCOS extendedCOS;
char destDuctName[MAX_CL_DUCT_NAME_LEN + 1];
unsigned int bundleLength;
int ductSocket = -1;
int bytesSent;
int keepalivePeriod = 0;
VInduct *viduct;
if (ductName == NULL)
{
PUTS("Usage: tcpclo <remote host name>[:<port number>]");
return 0;
}
if (bpAttach() < 0)
{
putErrmsg("tcpclo can't attach to BP", NULL);
return 1;
}
buffer = MTAKE(TCPCLA_BUFSZ);
if (buffer == NULL)
{
putErrmsg("No memory for TCP buffer in tcpclo.", NULL);
return 1;
}
findOutduct("tcp", ductName, &vduct, &vductElt);
if (vductElt == 0)
{
putErrmsg("No such tcp duct.", ductName);
MRELEASE(buffer);
return 1;
}
if (vduct->cloPid != ERROR && vduct->cloPid != sm_TaskIdSelf())
{
putErrmsg("CLO task is already started for this duct.",
itoa(vduct->cloPid));
MRELEASE(buffer);
return 1;
}
/* All command-line arguments are now validated. */
sdr = getIonsdr();
CHKERR(sdr_begin_xn(sdr));
sdr_read(sdr, (char *) &duct, sdr_list_data(sdr, vduct->outductElt),
sizeof(Outduct));
sdr_read(sdr, (char *) &protocol, duct.protocol, sizeof(ClProtocol));
sdr_exit_xn(sdr);
if (protocol.nominalRate == 0)
{
vduct->xmitThrottle.nominalRate = DEFAULT_TCP_RATE;
}
else
{
vduct->xmitThrottle.nominalRate = protocol.nominalRate;
}
memset((char *) outflows, 0, sizeof outflows);
outflows[0].outboundBundles = duct.bulkQueue;
outflows[1].outboundBundles = duct.stdQueue;
outflows[2].outboundBundles = duct.urgentQueue;
for (i = 0; i < 3; i++)
{
outflows[i].svcFactor = 1 << i;
}
hostName = ductName;
parseSocketSpec(ductName, &portNbr, &hostNbr);
if (portNbr == 0)
{
portNbr = BpTcpDefaultPortNbr;
}
portNbr = htons(portNbr);
if (hostNbr == 0)
{
putErrmsg("Can't get IP address for host.", hostName);
MRELEASE(buffer);
return 1;
}
hostNbr = htonl(hostNbr);
memset((char *) &socketName, 0, sizeof socketName);
inetName = (struct sockaddr_in *) &socketName;
inetName->sin_family = AF_INET;
inetName->sin_port = portNbr;
memcpy((char *) &(inetName->sin_addr.s_addr), (char *) &hostNbr, 4);
if (_tcpOutductId(&socketName, "tcp", ductName) < 0)
{
putErrmsg("Can't record TCP Outduct ID for connection.", NULL);
MRELEASE(buffer);
return -1;
}
/* Set up signal handling. SIGTERM is shutdown signal. */
oK(tcpcloSemaphore(&(vduct->semaphore)));
isignal(SIGTERM, shutDownClo);
#ifndef mingw
isignal(SIGPIPE, handleConnectionLoss);
#endif
/* Start the keepalive thread for the eventual connection. */
tcpDesiredKeepAlivePeriod = KEEPALIVE_PERIOD;
parms.cloRunning = &running;
pthread_mutex_init(&mutex, NULL);
parms.mutex = &mutex;
parms.socketName = &socketName;
parms.ductSocket = &ductSocket;
parms.keepalivePeriod = &keepalivePeriod;
if (pthread_begin(&keepaliveThread, NULL, sendKeepalives, &parms))
{
putSysErrmsg("tcpclo can't create keepalive thread", NULL);
MRELEASE(buffer);
pthread_mutex_destroy(&mutex);
return 1;
}
// Returns the VInduct Object of first induct with same protocol
// as the outduct. The VInduct is required to create an acq area.
// The Acq Area inturn uses the throttle information from VInduct
// object while receiving bundles. The throttle information
// of all inducts of the same induct will be the same, so choosing
// any induct will serve the purpose.
findVInduct(&viduct,protocol.name);
if(viduct == NULL)
{
putErrmsg("tcpclo can't get VInduct", NULL);
MRELEASE(buffer);
pthread_mutex_destroy(&mutex);
return 1;
}
rparms.vduct = viduct;
rparms.bundleSocket = &ductSocket;
rparms.mutex = &mutex;
rparms.cloRunning = &running;
if (pthread_begin(&receiverThread, NULL, receiveBundles, &rparms))
{
putSysErrmsg("tcpclo can't create receive thread", NULL);
MRELEASE(buffer);
pthread_mutex_destroy(&mutex);
return 1;
}
/* Can now begin transmitting to remote duct. */
{
char txt[500];
isprintf(txt, sizeof(txt),
"[i] tcpclo is running, spec=[%s:%d].",
inet_ntoa(inetName->sin_addr),
ntohs(inetName->sin_port));
writeMemo(txt);
}
while (running && !(sm_SemEnded(tcpcloSemaphore(NULL))))
{
if (bpDequeue(vduct, outflows, &bundleZco, &extendedCOS,
destDuctName, 0, -1) < 0)
{
running = 0; /* Terminate CLO. */
continue;
}
if (bundleZco == 0) /* Interrupted. */
{
continue;
}
CHKZERO(sdr_begin_xn(sdr));
bundleLength = zco_length(sdr, bundleZco);
sdr_exit_xn(sdr);
pthread_mutex_lock(&mutex);
bytesSent = sendBundleByTCPCL(&socketName, &ductSocket,
bundleLength, bundleZco, buffer, &keepalivePeriod);
pthread_mutex_unlock(&mutex);
if(bytesSent < 0)
{
running = 0; /* Terminate CLO. */
}
/* Make sure other tasks have a chance to run. */
sm_TaskYield();
}
writeMemo("[i] tcpclo done sending");
if (sendShutDownMessage(&ductSocket, SHUT_DN_NO, -1, &socketName) < 0)
{
putErrmsg("Sending Shutdown message failed!!",NULL);
}
if (ductSocket != -1)
{
closesocket(ductSocket);
ductSocket=-1;
}
running = 0;
pthread_join(keepaliveThread, NULL);
writeMemo("[i] tcpclo keepalive thread killed");
pthread_join(receiverThread, NULL);
writeMemo("[i] tcpclo receiver thread killed");
writeErrmsgMemos();
writeMemo("[i] tcpclo duct has ended.");
oK(_tcpOutductId(&socketName, NULL, NULL));
MRELEASE(buffer);
pthread_mutex_destroy(&mutex);
bp_detach();
return 0;
}
int bsspclo(int a1, int a2, int a3, int a4, int a5,
int a6, int a7, int a8, int a9, int a10)
{
char *ductName = (char *) a1;
#else
int main(int argc, char *argv[])
{
char *ductName = (argc > 1 ? argv[1] : NULL);
#endif
Sdr sdr;
VOutduct *vduct;
PsmAddress vductElt;
vast destEngineNbr;
Outduct outduct;
ClProtocol protocol;
Outflow outflows[3];
int i;
int running = 1;
Object bundleZco;
BpExtendedCOS extendedCOS;
char destDuctName[MAX_CL_DUCT_NAME_LEN + 1];
BsspSessionId sessionId;
unsigned char *buffer;
Lyst streams;
Bundle bundleImage;
char *dictionary = 0;
unsigned int bundleLength;
if (ductName == NULL)
{
PUTS("Usage: bsspclo [-]<destination engine number>");
return 0;
}
if (bpAttach() < 0)
{
putErrmsg("bsspclo can't attach to BP.", NULL);
return -1;
}
sdr = getIonsdr();
findOutduct("bssp", ductName, &vduct, &vductElt);
if (vductElt == 0)
{
putErrmsg("No such bssp duct.", ductName);
return -1;
}
if (vduct->cloPid != ERROR && vduct->cloPid != sm_TaskIdSelf())
{
putErrmsg("BSSPCLO task is already started for this duct.",
itoa(vduct->cloPid));
return -1;
}
/* All command-line arguments are now validated. */
buffer = (unsigned char *) MTAKE(BP_MAX_BLOCK_SIZE);
if (buffer == NULL)
{
putErrmsg("Can't get buffer for decoding bundle ZCOs.", NULL);
return -1;
}
streams = lyst_create_using(getIonMemoryMgr());
if (streams == NULL)
{
putErrmsg("Can't create lyst of streams.", NULL);
MRELEASE(buffer);
return -1;
}
lyst_delete_set(streams, eraseStream, NULL);
CHKERR(sdr_begin_xn(sdr));
sdr_read(sdr, (char *) &outduct, sdr_list_data(sdr, vduct->outductElt),
sizeof(Outduct));
sdr_read(sdr, (char *) &protocol, outduct.protocol, sizeof(ClProtocol));
sdr_exit_xn(sdr);
destEngineNbr = strtovast(ductName);
if (protocol.nominalRate == 0)
{
vduct->xmitThrottle.nominalRate = DEFAULT_BSSP_RATE;
}
else
{
vduct->xmitThrottle.nominalRate = protocol.nominalRate;
}
memset((char *) outflows, 0, sizeof outflows);
outflows[0].outboundBundles = outduct.bulkQueue;
outflows[1].outboundBundles = outduct.stdQueue;
outflows[2].outboundBundles = outduct.urgentQueue;
for (i = 0; i < 3; i++)
{
outflows[i].svcFactor = 1 << i;
}
if (bssp_attach() < 0)
{
putErrmsg("bsspclo can't initialize BSSP.", NULL);
lyst_destroy(streams);
MRELEASE(buffer);
return -1;
}
/* Set up signal handling. SIGTERM is shutdown signal. */
oK(bsspcloSemaphore(&(vduct->semaphore)));
isignal(SIGTERM, shutDownClo);
/* Can now begin transmitting to remote duct. */
writeMemo("[i] bsspclo is running.");
while (running && !(sm_SemEnded(bsspcloSemaphore(NULL))))
{
if (bpDequeue(vduct, outflows, &bundleZco, &extendedCOS,
destDuctName, 0, -1) < 0)
{
running = 0; /* Terminate CLO. */
continue;
}
if (bundleZco == 0) /* Interrupted. */
{
continue;
}
if (decodeBundle(sdr, bundleZco, buffer, &bundleImage,
&dictionary, &bundleLength) < 0)
{
putErrmsg("Can't decode bundle ZCO.", NULL);
CHKERR(sdr_begin_xn(sdr));
zco_destroy(sdr, bundleZco);
if (sdr_end_xn(sdr) < 0)
{
putErrmsg("Failed destroying ZCO.", NULL);
break;
}
continue;
}
switch (bssp_send(destEngineNbr, BpBsspClientId, bundleZco,
isInOrder(streams, &bundleImage), &sessionId))
{
case 0:
putErrmsg("Unable to send this bundle via BSSP.", NULL);
break;
case -1:
putErrmsg("BsspSend failed.", NULL);
running = 0; /* Terminate CLO. */
}
/* Make sure other tasks have a chance to run. */
sm_TaskYield();
/* Note: bundleZco is destroyed later, when BSSP's
* ExportSession is closed following transmission
* of bundle ZCOs as aggregated into a block. */
}
writeErrmsgMemos();
writeMemo("[i] bsspclo duct has ended.");
lyst_destroy(streams);
MRELEASE(buffer);
ionDetach();
return 0;
}
int stcpclo(int a1, int a2, int a3, int a4, int a5,
int a6, int a7, int a8, int a9, int a10)
{
char *ductName = (char *) a1;
#else
int main(int argc, char *argv[])
{
char *ductName = (argc > 1 ? argv[1] : NULL);
#endif
unsigned char *buffer;
VOutduct *vduct;
PsmAddress vductElt;
Sdr sdr;
Outduct duct;
ClProtocol protocol;
Outflow outflows[3];
int i;
char *hostName;
unsigned short portNbr;
unsigned int hostNbr;
struct sockaddr socketName;
struct sockaddr_in *inetName;
int running = 1;
pthread_mutex_t mutex;
KeepaliveThreadParms parms;
pthread_t keepaliveThread;
Object bundleZco;
BpExtendedCOS extendedCOS;
char destDuctName[MAX_CL_DUCT_NAME_LEN + 1];
unsigned int bundleLength;
int ductSocket = -1;
int bytesSent;
if (ductName == NULL)
{
PUTS("Usage: stcpclo <remote host name>[:<port number>]");
return 0;
}
if (bpAttach() < 0)
{
putErrmsg("stcpclo can't attach to BP.", NULL);
return -1;
}
buffer = MTAKE(TCPCLA_BUFSZ);
if (buffer == NULL)
{
putErrmsg("No memory for TCP buffer in stcpclo.", NULL);
return -1;
}
findOutduct("stcp", ductName, &vduct, &vductElt);
if (vductElt == 0)
{
putErrmsg("No such stcp duct.", ductName);
MRELEASE(buffer);
return -1;
}
if (vduct->cloPid > 0 && vduct->cloPid != sm_TaskIdSelf())
{
putErrmsg("CLO task is already started for this duct.",
itoa(vduct->cloPid));
MRELEASE(buffer);
return -1;
}
/* All command-line arguments are now validated. */
sdr = getIonsdr();
sdr_read(sdr, (char *) &duct, sdr_list_data(sdr, vduct->outductElt),
sizeof(Outduct));
sdr_read(sdr, (char *) &protocol, duct.protocol, sizeof(ClProtocol));
if (protocol.nominalRate <= 0)
{
vduct->xmitThrottle.nominalRate = DEFAULT_TCP_RATE;
}
else
{
vduct->xmitThrottle.nominalRate = protocol.nominalRate;
}
memset((char *) outflows, 0, sizeof outflows);
outflows[0].outboundBundles = duct.bulkQueue;
outflows[1].outboundBundles = duct.stdQueue;
outflows[2].outboundBundles = duct.urgentQueue;
for (i = 0; i < 3; i++)
{
outflows[i].svcFactor = 1 << i;
}
hostName = ductName;
parseSocketSpec(ductName, &portNbr, &hostNbr);
if (portNbr == 0)
{
portNbr = BpTcpDefaultPortNbr;
}
portNbr = htons(portNbr);
if (hostNbr == 0)
{
putErrmsg("Can't get IP address for host.", hostName);
MRELEASE(buffer);
return -1;
}
hostNbr = htonl(hostNbr);
memset((char *) &socketName, 0, sizeof socketName);
inetName = (struct sockaddr_in *) &socketName;
inetName->sin_family = AF_INET;
inetName->sin_port = portNbr;
memcpy((char *) &(inetName->sin_addr.s_addr), (char *) &hostNbr, 4);
/* Set up signal handling. SIGTERM is shutdown signal. */
oK(stcpcloSemaphore(&(vduct->semaphore)));
isignal(SIGTERM, shutDownClo);
isignal(SIGPIPE, handleConnectionLoss);
/* Start the keepalive thread for the eventual connection. */
parms.cloRunning = &running;
pthread_mutex_init(&mutex, NULL);
parms.mutex = &mutex;
parms.socketName = &socketName;
parms.ductSocket = &ductSocket;
if (pthread_create(&keepaliveThread, NULL, sendKeepalives, &parms))
{
putSysErrmsg("stcpclo can't create keepalive thread", NULL);
MRELEASE(buffer);
pthread_mutex_destroy(&mutex);
return 1;
}
/* Can now begin transmitting to remote duct. */
writeMemo("[i] stcpclo is running.");
while (!(sm_SemEnded(stcpcloSemaphore(NULL))))
{
if (bpDequeue(vduct, outflows, &bundleZco, &extendedCOS,
destDuctName) < 0)
{
sm_SemEnd(stcpcloSemaphore(NULL));/* Stop. */
continue;
}
if (bundleZco == 0) /* Interrupted. */
{
continue;
}
bundleLength = zco_length(sdr, bundleZco);
pthread_mutex_lock(&mutex);
bytesSent = sendBundleByTCP(&socketName, &ductSocket,
bundleLength, bundleZco, buffer);
pthread_mutex_unlock(&mutex);
if (bytesSent < bundleLength)
{
sm_SemEnd(stcpcloSemaphore(NULL));/* Stop. */
continue;
}
/* Make sure other tasks have a chance to run. */
sm_TaskYield();
}
running = 0; /* Terminate keepalive. */
pthread_join(keepaliveThread, NULL);
if (ductSocket != -1)
{
close(ductSocket);
}
pthread_mutex_destroy(&mutex);
writeErrmsgMemos();
writeMemo("[i] stcpclo duct has ended.");
MRELEASE(buffer);
ionDetach();
return 0;
}
int udpclo(int a1, int a2, int a3, int a4, int a5,
int a6, int a7, int a8, int a9, int a10)
{
#else
int main(int argc, char *argv[])
{
#endif
unsigned char *buffer;
VOutduct *vduct;
PsmAddress vductElt;
Sdr sdr;
Outduct outduct;
ClProtocol protocol;
Outflow outflows[3];
int i;
char *hostName;
unsigned short portNbr;
unsigned int hostNbr;
struct sockaddr socketName;
struct sockaddr_in *inetName;
Object bundleZco;
BpExtendedCOS extendedCOS;
char destDuctName[MAX_CL_DUCT_NAME_LEN + 1];
unsigned int bundleLength;
int ductSocket = -1;
int bytesSent;
if (bpAttach() < 0)
{
putErrmsg("udpclo can't attach to BP.", NULL);
return -1;
}
buffer = MTAKE(UDPCLA_BUFSZ);
if (buffer == NULL)
{
putErrmsg("No memory for UDP buffer in udpclo.", NULL);
return -1;
}
findOutduct("udp", "*", &vduct, &vductElt);
if (vductElt == 0)
{
putErrmsg("No such udp duct.", "*");
MRELEASE(buffer);
return -1;
}
if (vduct->cloPid > 0 && vduct->cloPid != sm_TaskIdSelf())
{
putErrmsg("CLO task is already started for this duct.",
itoa(vduct->cloPid));
MRELEASE(buffer);
return -1;
}
/* All command-line arguments are now validated. */
sdr = getIonsdr();
sdr_read(sdr, (char *) &outduct, sdr_list_data(sdr, vduct->outductElt),
sizeof(Outduct));
sdr_read(sdr, (char *) &protocol, outduct.protocol, sizeof(ClProtocol));
if (protocol.nominalRate <= 0)
{
vduct->xmitThrottle.nominalRate = DEFAULT_UDP_RATE;
}
else
{
vduct->xmitThrottle.nominalRate = protocol.nominalRate;
}
memset((char *) outflows, 0, sizeof outflows);
outflows[0].outboundBundles = outduct.bulkQueue;
outflows[1].outboundBundles = outduct.stdQueue;
outflows[2].outboundBundles = outduct.urgentQueue;
for (i = 0; i < 3; i++)
{
outflows[i].svcFactor = 1 << i;
}
/* Set up signal handling. SIGTERM is shutdown signal. */
oK(udpcloSemaphore(&(vduct->semaphore)));
isignal(SIGTERM, shutDownClo);
/* Can now begin transmitting to remote duct. */
writeMemo("[i] udpclo is running.");
while (!(sm_SemEnded(vduct->semaphore)))
{
if (bpDequeue(vduct, outflows, &bundleZco, &extendedCOS,
destDuctName) < 0)
{
sm_SemEnd(udpcloSemaphore(NULL));/* Stop. */
continue;
}
if (bundleZco == 0) /* Interrupted. */
{
continue;
}
hostName = destDuctName;
parseSocketSpec(destDuctName, &portNbr, &hostNbr);
if (portNbr == 0)
{
portNbr = BpUdpDefaultPortNbr;
}
portNbr = htons(portNbr);
if (hostNbr == 0)
{
writeMemoNote("[?] Can't get IP address for host",
hostName);
}
hostNbr = htonl(hostNbr);
memset((char *) &socketName, 0, sizeof socketName);
inetName = (struct sockaddr_in *) &socketName;
inetName->sin_family = AF_INET;
inetName->sin_port = portNbr;
memcpy((char *) &(inetName->sin_addr.s_addr),
(char *) &hostNbr, 4);
bundleLength = zco_length(sdr, bundleZco);
bytesSent = sendBundleByUDP(&socketName, &ductSocket,
bundleLength, bundleZco, buffer);
if (bytesSent < bundleLength)
{
sm_SemEnd(udpcloSemaphore(NULL));/* Stop. */
continue;
}
/* Make sure other tasks have a chance to run. */
sm_TaskYield();
}
if (ductSocket != -1)
{
close(ductSocket);
}
writeErrmsgMemos();
writeMemo("[i] udpclo duct has ended.");
MRELEASE(buffer);
ionDetach();
return 0;
}
