int
opal_timer_linux_open(void)
{
FILE *fp;
char *loc;
float cpu_f;
int ret;
char buf[1024];
fp = fopen("/proc/cpuinfo", "r");
if (NULL == fp) {
return OPAL_ERR_IN_ERRNO;
}
opal_timer_linux_freq = 0;
if (0 == opal_timer_linux_freq) {
/* first, look for a timebase field. probably only on PPC,
but one never knows */
loc = find_info(fp, "timebase", buf, 1024);
if (NULL != loc) {
int freq;
ret = sscanf(loc, "%d", &freq);
if (1 == ret) {
opal_timer_linux_freq = freq;
}
}
}
if (0 == opal_timer_linux_freq) {
/* find the CPU speed - most timers are 1:1 with CPU speed */
loc = find_info(fp, "cpu MHz", buf, 1024);
if (NULL != loc) {
ret = sscanf(loc, "%f", &cpu_f);
if (1 == ret) {
/* numer is in MHz - convert to Hz and make an integer */
opal_timer_linux_freq = (opal_timer_t) cpu_f * 1000000;
}
}
}
if (0 == opal_timer_linux_freq) {
/* look for the sparc way of getting cpu frequency */
loc = find_info(fp, "Cpu0ClkTck", buf, 1024);
if (NULL != loc) {
unsigned int freq;
ret = sscanf(loc, "%x", &freq);
if (1 == ret) {
opal_timer_linux_freq = freq;
}
}
}
fclose(fp);
return OPAL_SUCCESS;
}
//int MYCall_Back(void *pdata,int argc,char *value[],char *name[]);
TestShow::TestShow(QWidget *parent) :
QDialog(parent),
ui(new Ui::TestShow)
{
ui->setupUi(this);
setWindowFlags(Qt::FramelessWindowHint);
page = -1;
//初始化显示框
model=new QStandardItemModel(this);
model->setColumnCount(1);//ID option name age gender Result time,add some ,totally 11
ui->lineEdit_Year->setValidator(new QIntValidator(0,10000,this));
ui->lineEdit_Month->setValidator(new QIntValidator(0,12,this));
ui->lineEdit_Day->setValidator(new QIntValidator(0,30,this));
ui->pushButton_Exit->setFocusPolicy(Qt::NoFocus);
connect(ui->pushButton_up,SIGNAL(clicked()),this,SLOT(page_up()));
connect(ui->pushButton_down,SIGNAL(clicked()),this,SLOT(page_down()));
connect(ui->pushButton_go,SIGNAL(clicked()),this,SLOT(page_go()));
connect(ui->pushButton_Exit,SIGNAL(clicked()),this,SLOT(home()));
connect(ui->tableView,SIGNAL(clicked(QModelIndex)),this,SLOT(setPrintTrue(QModelIndex)));
connect(ui->pushButton_print,SIGNAL(clicked()),this,SLOT(PrintItem()));
connect(ui->pushButton_Search,SIGNAL(clicked()),this,SLOT(find_info()));
connect(ui->pushButton_LogOut,SIGNAL(clicked()),this,SLOT(logout()));
connect(ui->pushButton_Edit,SIGNAL(clicked()),this,SLOT(view_clicked()));
QRegExp rx("^[0-9]{1,10}$");//这个10就是最大长度
QValidator *validator = new QRegExpValidator(rx,0);
ui->lineEdit_Page->setValidator(validator);
dateEdit=new QDateEdit(this);
dateEdit->setDisplayFormat("yyyy-MM-dd");
dateEdit->setGeometry(QRect(413,90,163,29));
dateEdit->setAlignment(Qt::AlignCenter);
dateEdit->setDate(QDateTime::currentDateTime().date());
ui->pushButton->setVisible(false);
}
static int setvar(const char *varname, const char *val)
{
dummy_info_t *item;
upsdebugx(2, "entering setvar(%s, %s)", varname, val);
/* FIXME: the below is only valid if (mode == MODE_DUMMY)
* if (mode == MODE_REPEATER) => forward
* if (mode == MODE_META) => ?
*/
if (!strncmp(varname, "ups.status", 10))
{
status_init();
/* FIXME: split and check values (support multiple values), à la usbhid-ups */
status_set(val);
status_commit();
return STAT_SET_HANDLED;
}
/* Check variable validity */
if (!is_valid_data(varname))
{
upsdebugx(2, "setvar: invalid variable name (%s)", varname);
return STAT_SET_UNKNOWN;
}
/* Check value validity */
if (!is_valid_value(varname, val))
{
upsdebugx(2, "setvar: invalid value (%s) for variable (%s)", val, varname);
return STAT_SET_UNKNOWN;
}
/* If value is empty, remove the variable (FIXME: do we need
* a magic word?) */
if (strlen(val) == 0)
{
dstate_delinfo(varname);
}
else
{
dstate_setinfo(varname, "%s", val);
if ( (item = find_info(varname)) != NULL)
{
dstate_setflags(item->info_type, item->info_flags);
/* Set max length for strings, if needed */
if (item->info_flags & ST_FLAG_STRING)
dstate_setaux(item->info_type, item->info_len);
}
}
return STAT_SET_HANDLED;
}
/*
*********************************************************************************************************
* mem_set_voltage
*
*Description: set voltage for mem;
*
*Arguments : type voltage type, defined as "enum power_vol_type_e";
* voltage voltage value, based on "mv";
*
*Return : 0: succeed;
* -1: failed.
*Notes :
*
*********************************************************************************************************
*/
__s32 mem_set_voltage(enum power_vol_type_e type, __s32 voltage)
{
struct axp_info *info = 0;
__u8 val, mask, reg_val;
__s32 ret = 0;
info = find_info(type);
if (info == 0) {
return -1;
}
if (check_range(info, voltage)) {
return -1;
}
if (type != POWER_VOL_LDO4)
val = raw_lib_udiv((voltage-info->min_uV+info->step_uV-1), info->step_uV);
else{
if(voltage == 1250000 ){
val = 0;
}
else{
val = raw_lib_udiv((voltage-1200000+info->step_uV-1), info->step_uV);
if(val > 16){
val = val - 6;
}
else if(val > 13){
val = val - 5;
}
else if(val > 12){
val = val - 4;
}
else if(val > 8)
val = 8;
}
}
val <<= info->vol_shift;
mask = ((1 << info->vol_nbits) - 1) << info->vol_shift;
if( 0 != twi_byte_rw(TWI_OP_RD,AXP_ADDR,info->vol_reg, ®_val)){
return -1;
}
if ((reg_val & mask) != val) {
reg_val = (reg_val & ~mask) | val;
if(0 != twi_byte_rw(TWI_OP_WR,AXP_ADDR,info->vol_reg, ®_val)){
return -1;
}
}
return ret;
}
info_s *get_info (u64 ino)
{
info_s *info;
FN;
PRd(ino);
info = find_info(ino);
if (info) return info;
info = find_inode(ino);
if (!info) return NULL;
add_info(ino, info);
return info;
}
static sasl_info*
get_info (void)
{
const char* name;
name = hexchat_get_info (ph, "network");
if (name)
{
return find_info (name);
}
else
{
return NULL;
}
}
/* check if data exists in our data table */
static int is_valid_data(const char* varname)
{
dummy_info_t *item;
if ( (item = find_info(varname)) != NULL)
{
return 1;
}
/* FIXME: we need to have the full data set before
* enforcing controls! We also need a way to automate
* the update / sync process (with cmdvartab?!) */
upsdebugx(1, "Unknown data. Committing anyway...");
return 1;
/* return 0;*/
}
/*
*********************************************************************************************************
* standby_get_voltage
*
*Description: get voltage for standby;
*
*Arguments : type voltage type, defined as "enum power_vol_type_e";
*
*Return : voltage value, based on "mv";
*
*Notes :
*
*********************************************************************************************************
*/
__u32 standby_get_voltage(enum power_vol_type_e type)
{
struct axp_info *info = 0;
__u8 val, mask;
info = find_info(type);
if (info == 0) {
return -1;
}
twi_byte_rw(TWI_OP_RD,AXP_ADDR,info->vol_reg, &val);
mask = ((1 << info->vol_nbits) - 1) << info->vol_shift;
val = (val & mask) >> info->vol_shift;
if (type != POWER_VOL_LDO4)
return info->min_uV + info->step_uV * val;
else
return axp20_ldo4_data[val]*1000;
}
/*
* Given a Helios device name, set this up as a major device unit
* (one of the MAX_HELIOS_DEVICES) and start a driver routine for it.
* Returns pointer to error message on failure. NULL otherwise.
*/
char *hd_start(char *devname, int major)
{
static char buffer[100];
void *devinfo;
InfoNode *deviceinfo;
DiscDevInfo *ddi;
/* The major device number */
if ((major < 0) || (major >= MAX_HELIOS_DEVICES) || (hd[major].dcb)) {
return("Invalid major device or device already in use");
}
/* Get devinfo */
if ((devinfo = load_devinfo()) == NULL)
return("Failed to load devinfo file");
/* Is entry there ? */
if ((deviceinfo = find_info(devinfo,Info_DiscDev,devname)) == NULL) {
Free(devinfo);
return("No entry for device in devinfo");
}
ddi = (DiscDevInfo *)RTOA(deviceinfo->Info);
/* Open it ! */
if ((hd[major].dcb = OpenDevice(RTOA(ddi->Name),ddi))
== NULL) {
strcpy(buffer,"Failed to open device ");
strcat(buffer,RTOA(ddi->Name));
Free(devinfo);
return(buffer);
}
Free(devinfo);
/* Fork off the device server */
if (!Fork(5000,hd_intr_server,sizeof(int),major)) {
return("Failed to start device server");
}
/* No errors */
return(NULL);
}
void
builtin_help (char * name)
{
char info_name[100];
struct info_buffer * ib;
if (strlen (name) > sizeof (info_name) - 20)
io_error_msg ("No built in help for %s.", name);
sprintf (info_name, "_info_%s", name);
ib = find_info (info_name);
if (!ib)
{
char ** msg = forminfo_text (name);
if (!msg)
{
msg = (char **)ck_malloc (sizeof (char *) * 2);
msg[0] = mk_sprintf ("No built in help for %s.", name);
msg[1] = 0;
}
ib = find_or_make_info (info_name);
ib->len = parray_len (msg);
ib->text = msg;
}
{
char exp_name[200];
char command[250];
struct info_buffer * expanded;
sprintf (exp_name, "_expanded_%s", info_name);
expanded = find_or_make_info (exp_name);
clear_info (expanded);
expand_help_msg (expanded, ib);
sprintf (command, "{set-info %s}", exp_name);
run_string_as_macro (command);
}
}
static int opal_timer_linux_find_freq(void)
{
FILE *fp;
char *loc;
float cpu_f;
int ret;
char buf[1024];
fp = fopen("/proc/cpuinfo", "r");
if (NULL == fp) {
return OPAL_ERR_IN_ERRNO;
}
opal_timer_linux_freq = 0;
#if OPAL_ASSEMBLY_ARCH == OPAL_ARM64
opal_timer_linux_freq = opal_sys_timer_freq();
#endif
if (0 == opal_timer_linux_freq) {
/* first, look for a timebase field. probably only on PPC,
but one never knows */
loc = find_info(fp, "timebase", buf, 1024);
if (NULL != loc) {
int freq;
ret = sscanf(loc, "%d", &freq);
if (1 == ret) {
opal_timer_linux_freq = freq;
}
}
}
if (0 == opal_timer_linux_freq) {
/* find the CPU speed - most timers are 1:1 with CPU speed */
loc = find_info(fp, "cpu MHz", buf, 1024);
if (NULL != loc) {
ret = sscanf(loc, "%f", &cpu_f);
if (1 == ret) {
/* numer is in MHz - convert to Hz and make an integer */
opal_timer_linux_freq = (opal_timer_t) (cpu_f * 1000000);
}
}
}
if (0 == opal_timer_linux_freq) {
/* look for the sparc way of getting cpu frequency */
loc = find_info(fp, "Cpu0ClkTck", buf, 1024);
if (NULL != loc) {
unsigned int freq;
ret = sscanf(loc, "%x", &freq);
if (1 == ret) {
opal_timer_linux_freq = freq;
}
}
}
fclose(fp);
/* convert the timer frequency to MHz to avoid an extra operation when
* converting from cycles to usec */
opal_timer_linux_freq /= 1000000;
return OPAL_SUCCESS;
}
