Exemple #1
0
/* littler exit */
void littler_CleanUp(SA_TYPE saveact, int status, int runLast){
    R_dot_Last();
    R_RunExitFinalizers();
    if (perSessionTempDir) R_CleanTempDir();
    fpu_setup(FALSE);
    Rf_endEmbeddedR(0);
    exit(status);
}
Exemple #2
0
/* use fatal !=0 for emergency bail out */
void Rf_endEmbeddedR(int fatal)
{
    R_RunExitFinalizers();
    CleanEd();
    if(!fatal) KillAllDevices();
    R_CleanTempDir();
    if(!fatal && R_CollectWarnings)
	PrintWarnings();	/* from device close and .Last */
    fpu_setup(FALSE);
}
Exemple #3
0
void attribute_hidden Rstd_CleanUp(SA_TYPE saveact, int status, int runLast)
{
    if(saveact == SA_DEFAULT) /* The normal case apart from R_Suicide */
	saveact = SaveAction;

    if(saveact == SA_SAVEASK) {
	if(R_Interactive) {
	    unsigned char buf[1024];
	qask:

	    R_ClearerrConsole();
	    R_FlushConsole();
	    int res = R_ReadConsole("Save workspace image? [y/n/c]: ",
				    buf, 128, 0);
	    if(res) {
		switch (buf[0]) {
		case 'y':
		case 'Y':
		    saveact = SA_SAVE;
		    break;
		case 'n':
		case 'N':
		    saveact = SA_NOSAVE;
		    break;
		case 'c':
		case 'C':
		    jump_to_toplevel();
		    break;
		default:
		    goto qask;
		}
	    } else saveact = SA_NOSAVE; /* probably EOF */
	} else
	    saveact = SaveAction;
    }
    switch (saveact) {
    case SA_SAVE:
	if(runLast) R_dot_Last();
	if(R_DirtyImage) R_SaveGlobalEnv();
#ifdef HAVE_LIBREADLINE
# ifdef HAVE_READLINE_HISTORY_H
	if(R_Interactive && UsingReadline) {
	    int err;
	    R_setupHistory(); /* re-read the history size and filename */
	    stifle_history(R_HistorySize);
	    err = write_history(R_HistoryFile);
	    if(err) warning(_("problem in saving the history file '%s'"), 
			    R_HistoryFile);
	}
# endif /* HAVE_READLINE_HISTORY_H */
#endif /* HAVE_LIBREADLINE */
	break;
    case SA_NOSAVE:
	if(runLast) R_dot_Last();
	break;
    case SA_SUICIDE:
    default:
	break;
    }
    R_RunExitFinalizers();
    CleanEd();
    if(saveact != SA_SUICIDE) KillAllDevices();
    R_CleanTempDir();
    if(saveact != SA_SUICIDE && R_CollectWarnings)
	PrintWarnings();	/* from device close and (if run) .Last */
    if(ifp) fclose(ifp);        /* input file from -f or --file= */
    fpu_setup(FALSE);

    exit(status);
}
Exemple #4
0
int Rf_initialize_R(int ac, char **av)
{
    int i, ioff = 1, j;
    Rboolean useX11 = TRUE, useTk = FALSE;
    char *p, msg[1024], cmdlines[10000], **avv;
    structRstart rstart;
    Rstart Rp = &rstart;
    Rboolean force_interactive = FALSE;


#if defined(HAVE_SYS_RESOURCE_H) && defined(HAVE_GETRLIMIT)
{
    struct rlimit rlim;

    {
	uintptr_t ii = dummy_ii();
	/* 1 is downwards */
	
	R_CStackDir = ((uintptr_t)&i > ii) ? 1 : -1;
    }

    if(getrlimit(RLIMIT_STACK, &rlim) == 0) {
	unsigned long lim1, lim2;
	lim1 = (unsigned long) rlim.rlim_cur;
	lim2 = (unsigned long) rlim.rlim_max; /* Usually unlimited */
	R_CStackLimit = lim1 < lim2 ? lim1 : lim2;
    }
#if defined(HAVE_LIBC_STACK_END)
    R_CStackStart = (uintptr_t) __libc_stack_end;
#elif defined(HAVE_KERN_USRSTACK)
    {
	/* Borrowed from mzscheme/gc/os_dep.c */
	int nm[2] = {CTL_KERN, KERN_USRSTACK};
	void * base;
	size_t len = sizeof(void *);
	(void) sysctl(nm, 2, &base, &len, NULL, 0);
	R_CStackStart = (uintptr_t) base;
    }
#else
    if(R_running_as_main_program) {
	/* This is not the main program, but unless embedded it is
	   near the top, 5540 bytes away when checked. */
	R_CStackStart = (uintptr_t) &i + (6000 * R_CStackDir);
    }
#endif
    if(R_CStackStart == -1) R_CStackLimit = -1; /* never set */

    /* printf("stack limit %ld, start %lx dir %d \n", R_CStackLimit,
	      R_CStackStart, R_CStackDir); */
}
#endif

    ptr_R_Suicide = Rstd_Suicide;
    ptr_R_ShowMessage = Rstd_ShowMessage;
    ptr_R_ReadConsole = Rstd_ReadConsole;
    ptr_R_WriteConsole = Rstd_WriteConsole;
    ptr_R_ResetConsole = Rstd_ResetConsole;
    ptr_R_FlushConsole = Rstd_FlushConsole;
    ptr_R_ClearerrConsole = Rstd_ClearerrConsole;
    ptr_R_Busy = Rstd_Busy;
    ptr_R_CleanUp = Rstd_CleanUp;
    ptr_R_ShowFiles = Rstd_ShowFiles;
    ptr_R_ChooseFile = Rstd_ChooseFile;
    ptr_R_loadhistory = Rstd_loadhistory;
    ptr_R_savehistory = Rstd_savehistory;
    ptr_R_addhistory = Rstd_addhistory;
    ptr_R_EditFile = NULL; /* for future expansion */
    R_timeout_handler = NULL;
    R_timeout_val = 0;

    R_GlobalContext = NULL; /* Make R_Suicide less messy... */

    if((R_Home = R_HomeDir()) == NULL)
	R_Suicide("R home directory is not defined");
    BindDomain(R_Home);

    process_system_Renviron();

    R_setStartTime();
    R_DefParams(Rp);
    /* Store the command line arguments before they are processed
       by the R option handler.
     */
    R_set_command_line_arguments(ac, av);
    cmdlines[0] = '\0';

    /* first task is to select the GUI.
       If run from the shell script, only Tk|tk|X11|x11 are allowed.
     */
    for(i = 0, avv = av; i < ac; i++, avv++) {
	if(!strncmp(*avv, "--gui", 5) || !strncmp(*avv, "-g", 2)) {
	    if(!strncmp(*avv, "--gui", 5) && strlen(*avv) >= 7)
		p = &(*avv)[6];
	    else {
		if(i+1 < ac) {
		    avv++; p = *avv; ioff++;
		} else {
		    snprintf(msg, 1024,
			    _("WARNING: --gui or -g without value ignored"));
		    R_ShowMessage(msg);
		    p = "X11";
		}
	    }
	    if(!strcmp(p, "none"))
		useX11 = FALSE; // not allowed from R.sh
#ifdef HAVE_AQUA
	    else if(!strcmp(p, "aqua"))
		useaqua = TRUE; // not allowed from R.sh but used by R.app
#endif
	    else if(!strcmp(p, "X11") || !strcmp(p, "x11"))
		useX11 = TRUE;
	    else if(!strcmp(p, "Tk") || !strcmp(p, "tk"))
		useTk = TRUE;
	    else {
#ifdef HAVE_X11
		snprintf(msg, 1024,
			 _("WARNING: unknown gui '%s', using X11\n"), p);
#else
		snprintf(msg, 1024,
			 _("WARNING: unknown gui '%s', using none\n"), p);
#endif
		R_ShowMessage(msg);
	    }
	    /* now remove it/them */
	    for(j = i; j < ac - ioff; j++)
		av[j] = av[j + ioff];
	    ac -= ioff;
	    break;
	}
    }

#ifdef HAVE_X11
    if(useX11) R_GUIType = "X11";
#endif /* HAVE_X11 */

#ifdef HAVE_AQUA
    if(useaqua) R_GUIType = "AQUA";
#endif

#ifdef HAVE_TCLTK
    if(useTk) R_GUIType = "Tk";
#endif

    R_common_command_line(&ac, av, Rp);
    while (--ac) {
	if (**++av == '-') {
	    if(!strcmp(*av, "--no-readline")) {
		UsingReadline = FALSE;
	    } else if(!strcmp(*av, "-f")) {
		ac--; av++;
		Rp->R_Interactive = FALSE;
		if(strcmp(*av, "-")) {
		    /* Undo the escaping done in the front end */
		    char path[PATH_MAX], *p = path, *q;
		    for(q = *av; *q; q++) {
			if(*q == '~' && *(q+1) == '+' && *(q+2) == '~') {
			    q += 2;
			    *p++ = ' ';
			} else *p++ = *q;
		    }
		    *p = '\0';
		    ifp = R_fopen(path, "r");
		    if(!ifp) {
			snprintf(msg, 1024,
				 _("cannot open file '%s': %s"),
				 path, strerror(errno));
			R_Suicide(msg);
		    }
		}
	    } else if(!strncmp(*av, "--file=", 7)) {
		Rp->R_Interactive = FALSE;
		if(strcmp((*av)+7, "-")) {
		    /* Undo the escaping done in the front end */
		    char path[PATH_MAX], *p = path, *q;
		    for(q = (*av)+7; *q; q++) {
			if(*q == '~' && *(q+1) == '+' && *(q+2) == '~') {
			    q += 2;
			    *p++ = ' ';
			} else *p++ = *q;
		    }
		    *p = '\0';
		    ifp = R_fopen(path, "r");
		    if(!ifp) {
			snprintf(msg, 1024,
				 _("cannot open file '%s': %s"),
				 path, strerror(errno));
			R_Suicide(msg);
		    }
		}
	    } else if(!strcmp(*av, "-e")) {
		ac--; av++;
		Rp->R_Interactive = FALSE;
		if(strlen(cmdlines) + strlen(*av) + 2 <= 10000) {
		    char *p = cmdlines+strlen(cmdlines), *q;
		    /* Undo the escaping done in the front end */
		    for(q = *av; *q; q++) {
			if(*q == '~' && *(q+1) == '+' && *(q+2) == '~') {
			    q += 2;
			    *p++ = ' ';
			} else *p++ = *q;
		    }
		    *p++ = '\n'; *p = '\0';
		} else {
		    snprintf(msg, 1024, _("WARNING: '-e %s' omitted as input is too long\n"), *av);
		    R_ShowMessage(msg);
		}
	    } else if(!strcmp(*av, "--args")) {
		break;
	    } else if(!strcmp(*av, "--interactive")) {
		force_interactive = TRUE;
		break;
	    } else {
#ifdef HAVE_AQUA
		// r27492: in 2003 launching from 'Finder OSX' passed this
		if(!strncmp(*av, "-psn", 4)) break; else
#endif
		snprintf(msg, 1024, _("WARNING: unknown option '%s'\n"), *av);
		R_ShowMessage(msg);
	    }
	} else {
	    snprintf(msg, 1024, _("ARGUMENT '%s' __ignored__\n"), *av);
	    R_ShowMessage(msg);
	}
    }

    if(strlen(cmdlines)) { /* had at least one -e option */
	size_t res;
	if(ifp) R_Suicide(_("cannot use -e with -f or --file"));
	ifp = tmpfile();
	if(!ifp) R_Suicide(_("creating temporary file for '-e' failed"));
	res = fwrite(cmdlines, strlen(cmdlines)+1, 1, ifp);
	if(res != 1) error("fwrite error in initialize_R");
	fflush(ifp);
	rewind(ifp);
    }
    if (ifp && Rp->SaveAction != SA_SAVE) Rp->SaveAction = SA_NOSAVE;

    R_SetParams(Rp);

    if(!Rp->NoRenviron) {
	process_site_Renviron();
	process_user_Renviron();
    }


    /* On Unix the console is a file; we just use stdio to write on it */

#ifdef HAVE_AQUA
    if(useaqua)
	R_Interactive = useaqua;
    else
#endif
	R_Interactive = R_Interactive && (force_interactive || isatty(0));

#ifdef HAVE_AQUA
    /* for Aqua and non-dumb terminal use callbacks instead of connections
       and pretty-print warnings/errors (ESS = dumb terminal) */
    if(useaqua || 
       (R_Interactive && getenv("TERM") && strcmp(getenv("TERM"), "dumb"))) {
	R_Outputfile = NULL;
	R_Consolefile = NULL;
	ptr_R_WriteConsoleEx = Rstd_WriteConsoleEx;
	ptr_R_WriteConsole = NULL;
    } else {
#endif
    R_Outputfile = stdout;
    R_Consolefile = stderr;
#ifdef HAVE_AQUA
    }
#endif


/*
 *  Since users' expectations for save/no-save will differ, we decided
 *  that they should be forced to specify in the non-interactive case.
 */
    if (!R_Interactive && Rp->SaveAction != SA_SAVE &&
	Rp->SaveAction != SA_NOSAVE)
	R_Suicide(_("you must specify '--save', '--no-save' or '--vanilla'"));

    R_setupHistory();
    if (R_RestoreHistory)
	Rstd_read_history(R_HistoryFile);
    fpu_setup(1);

    return(0);
}
Exemple #5
0
int Rf_initialize_R(int ac, char **av)
{
    int i, ioff = 1, j;
    Rboolean useX11 = TRUE, useTk = FALSE;
    char *p, msg[1024], cmdlines[10000], **avv;
    structRstart rstart;
    Rstart Rp = &rstart;
    Rboolean force_interactive = FALSE;

    if (num_initialized++) {
	fprintf(stderr, "%s", "R is already initialized\n");
	exit(1);
    }


#if defined(HAVE_SYS_RESOURCE_H) && defined(HAVE_GETRLIMIT)
{
    /* getrlimit is POSIX:
       http://pubs.opengroup.org/onlinepubs/9699919799/functions/getrlimit.html
    */
    struct rlimit rlim;

    {
	uintptr_t ii = dummy_ii();
	/* 1 is downwards */

	R_CStackDir = ((uintptr_t)&i > ii) ? 1 : -1;
    }

    if(getrlimit(RLIMIT_STACK, &rlim) == 0) {
	/* 'unlimited' is represented by RLIM_INFINITY, which is a
	   very large (but maybe not the largest) representable value.

	   The standard allows the values RLIM_SAVED_CUR and
	   RLIB_SAVED_MAX, apparently used on 32-bit AIX.  
	   (http://www.ibm.com/support/knowledgecenter/ssw_aix_61/com.ibm.aix.basetrf1/getrlimit_64.htm)

	   These may or may not be different from RLIM_INFINITY (they
	   are the same on Linux and macOS but not Solaris where they
	   are larger).  We will assume that unrepresentable limits
	   are very large.

	   This is cautious: it is extremely unlikely that the soft
	   limit is either unlimited or unrepresentable.
	*/
	rlim_t lim = rlim.rlim_cur;
#if defined(RLIM_SAVED_CUR) && defined(RLIM_SAVED_MAX)
	if (lim == RLIM_SAVED_CUR || lim == RLIM_SAVED_MAX) 
	    lim = RLIM_INFINITY;
#endif
	if (lim != RLIM_INFINITY) R_CStackLimit = (uintptr_t) lim;
    }
#if defined(HAVE_LIBC_STACK_END)
    {
	R_CStackStart = (uintptr_t) __libc_stack_end;
	/* The libc stack end is not exactly at the stack start, so one
	   cannot access __libc_stack_end - R_CStackLimit/getrlimit + 1. We
	   have to find the real stack start that matches getrlimit.

	   A modern alternative to __libc_stack_end and to parsing /proc/maps
	   directly is pthread_getattr_np; it doesn't provide the exact stack
	   start, either, but provides a matching stack size smaller than 
	   the one obtained from getrlimit. However, pthread_getattr_np
	   may have not worked properly on old Linux distributions. */
	
	/* based on GDB relocatable.c */
	FILE *f;
	f = fopen("/proc/self/maps", "r");
	if (f) {
	    for(;;) {
		int c;
		unsigned long start, end;

		if (fscanf(f, "%lx-%lx", &start, &end) == 2 &&
		    R_CStackStart >= (uintptr_t)start &&
		    R_CStackStart < (uintptr_t)end) {
		    
		    /* would this be ok for R_CStackDir == -1? */
		    R_CStackStart = (uintptr_t) ((R_CStackDir == 1) ? end : start);
		    break;
		}
		for(c = getc(f); c != '\n' && c != EOF; c = getc(f));
		if (c == EOF) {
		    /* could also abort here, but R will usually work with
		       R_CStackStart set just for __libc_stack_end */
		    fprintf(stderr, "WARNING: Error parsing /proc/self/maps!\n");
		    break;
		}
	    }
	    fclose(f);
	}
    }
#elif defined(HAVE_KERN_USRSTACK)
    {
	/* Borrowed from mzscheme/gc/os_dep.c */
	int nm[2] = {CTL_KERN, KERN_USRSTACK};
	void * base;
	size_t len = sizeof(void *);
	(void) sysctl(nm, 2, &base, &len, NULL, 0);
	R_CStackStart = (uintptr_t) base;
    }
#elif defined(HAVE_THR_STKSEGMENT)
    {
	/* Solaris */
	stack_t stack;
	if (thr_stksegment(&stack))
	    R_Suicide("Cannot obtain stack information (thr_stksegment).");
	R_CStackStart = (uintptr_t) stack.ss_sp;
	/* This _may_ have to be adjusted for a (perhaps theoretical) platform
	   where the stack would grow upwards.

	   The stack size could be updated based on stack.ss_size, but experiments
	   suggest getrlimit is safe here. */
    }
#else
    if(R_running_as_main_program) {
	/* This is not the main program, but unless embedded it is
	   near the top, 5540 bytes away when checked. */
	R_CStackStart = (uintptr_t) &i + (6000 * R_CStackDir);
    }
#endif
    if(R_CStackStart == (uintptr_t)(-1)) R_CStackLimit = (uintptr_t)(-1); /* never set */

    /* setup_Rmainloop includes (disabled) code to test stack detection */
}
#endif

    ptr_R_Suicide = Rstd_Suicide;
    ptr_R_ShowMessage = Rstd_ShowMessage;
    ptr_R_ReadConsole = Rstd_ReadConsole;
    ptr_R_WriteConsole = Rstd_WriteConsole;
    ptr_R_ResetConsole = Rstd_ResetConsole;
    ptr_R_FlushConsole = Rstd_FlushConsole;
    ptr_R_ClearerrConsole = Rstd_ClearerrConsole;
    ptr_R_Busy = Rstd_Busy;
    ptr_R_CleanUp = Rstd_CleanUp;
    ptr_R_ShowFiles = Rstd_ShowFiles;
    ptr_R_ChooseFile = Rstd_ChooseFile;
    ptr_R_loadhistory = Rstd_loadhistory;
    ptr_R_savehistory = Rstd_savehistory;
    ptr_R_addhistory = Rstd_addhistory;
    ptr_R_EditFile = NULL; /* for future expansion */
    R_timeout_handler = NULL;
    R_timeout_val = 0;

    R_GlobalContext = NULL; /* Make R_Suicide less messy... */

    if((R_Home = R_HomeDir()) == NULL)
	R_Suicide("R home directory is not defined");
    BindDomain(R_Home);

    process_system_Renviron();

    R_setStartTime();
    R_DefParams(Rp);
    /* Store the command line arguments before they are processed
       by the R option handler.
     */
    R_set_command_line_arguments(ac, av);
    cmdlines[0] = '\0';

    /* first task is to select the GUI.
       If run from the shell script, only Tk|tk|X11|x11 are allowed.
     */
    for(i = 0, avv = av; i < ac; i++, avv++) {
	if (!strcmp(*avv, "--args"))
	    break;
	if(!strncmp(*avv, "--gui", 5) || !strncmp(*avv, "-g", 2)) {
	    if(!strncmp(*avv, "--gui", 5) && strlen(*avv) >= 7)
		p = &(*avv)[6];
	    else {
		if(i+1 < ac) {
		    avv++; p = *avv; ioff++;
		} else {
		    snprintf(msg, 1024,
			    _("WARNING: --gui or -g without value ignored"));
		    R_ShowMessage(msg);
		    p = "X11";
		}
	    }
	    if(!strcmp(p, "none"))
		useX11 = FALSE; // not allowed from R.sh
#ifdef HAVE_AQUA
	    else if(!strcmp(p, "aqua"))
		useaqua = TRUE; // not allowed from R.sh but used by R.app
#endif
	    else if(!strcmp(p, "X11") || !strcmp(p, "x11"))
		useX11 = TRUE;
	    else if(!strcmp(p, "Tk") || !strcmp(p, "tk"))
		useTk = TRUE;
	    else {
#ifdef HAVE_X11
		snprintf(msg, 1024,
			 _("WARNING: unknown gui '%s', using X11\n"), p);
#else
		snprintf(msg, 1024,
			 _("WARNING: unknown gui '%s', using none\n"), p);
#endif
		R_ShowMessage(msg);
	    }
	    /* now remove it/them */
	    for(j = i; j < ac - ioff; j++)
		av[j] = av[j + ioff];
	    ac -= ioff;
	    break;
	}
    }

#ifdef HAVE_X11
    if(useX11) R_GUIType = "X11";
#endif /* HAVE_X11 */

#ifdef HAVE_AQUA
    if(useaqua) R_GUIType = "AQUA";
#endif

#ifdef HAVE_TCLTK
    if(useTk) R_GUIType = "Tk";
#endif

    R_common_command_line(&ac, av, Rp);
    while (--ac) {
	if (**++av == '-') {
	    if(!strcmp(*av, "--no-readline")) {
		UsingReadline = FALSE;
	    } else if(!strcmp(*av, "-f")) {
		ac--; av++;
#define R_INIT_TREAT_F(_AV_)						\
		Rp->R_Interactive = FALSE;				\
		if(strcmp(_AV_, "-")) {					\
		    char path[PATH_MAX], *p = path;			\
		    p = unescape_arg(p, _AV_);				\
		    *p = '\0';						\
		    ifp = R_fopen(path, "r");				\
		    if(!ifp) {						\
			snprintf(msg, 1024,				\
				 _("cannot open file '%s': %s"),	\
				 path, strerror(errno));		\
			R_Suicide(msg);					\
		    }							\
		}
		R_INIT_TREAT_F(*av);

	    } else if(!strncmp(*av, "--file=", 7)) {

		R_INIT_TREAT_F((*av)+7);

	    } else if(!strcmp(*av, "-e")) {
		ac--; av++;
		Rp->R_Interactive = FALSE;
		if(strlen(cmdlines) + strlen(*av) + 2 <= 10000) {
		    char *p = cmdlines+strlen(cmdlines);
		    p = unescape_arg(p, *av);
		    *p++ = '\n'; *p = '\0';
		} else {
		    snprintf(msg, 1024, _("WARNING: '-e %s' omitted as input is too long\n"), *av);
		    R_ShowMessage(msg);
		}
	    } else if(!strcmp(*av, "--args")) {
		break;
	    } else if(!strcmp(*av, "--interactive")) {
		force_interactive = TRUE;
		break;
	    } else {
#ifdef HAVE_AQUA
		// r27492: in 2003 launching from 'Finder OSX' passed this
		if(!strncmp(*av, "-psn", 4)) break; else
#endif
		snprintf(msg, 1024, _("WARNING: unknown option '%s'\n"), *av);
		R_ShowMessage(msg);
	    }
	} else {
	    snprintf(msg, 1024, _("ARGUMENT '%s' __ignored__\n"), *av);
	    R_ShowMessage(msg);
	}
    }

    if(strlen(cmdlines)) { /* had at least one -e option */
	size_t res;
	if(ifp) R_Suicide(_("cannot use -e with -f or --file"));
	ifp = tmpfile();
	if(!ifp) R_Suicide(_("creating temporary file for '-e' failed"));
	res = fwrite(cmdlines, strlen(cmdlines)+1, 1, ifp);
	if(res != 1) error("fwrite error in initialize_R");
	fflush(ifp);
	rewind(ifp);
    }
    if (ifp && Rp->SaveAction != SA_SAVE) Rp->SaveAction = SA_NOSAVE;

    R_SetParams(Rp);

    if(!Rp->NoRenviron) {
	process_site_Renviron();
	process_user_Renviron();

	/* allow for R_MAX_[VN]SIZE and R_[VN]SIZE in user/site Renviron */
	R_SizeFromEnv(Rp);
	R_SetParams(Rp);
    }


    /* On Unix the console is a file; we just use stdio to write on it */

#ifdef HAVE_AQUA
    if(useaqua)
	R_Interactive = useaqua;
    else
#endif
	R_Interactive = R_Interactive && (force_interactive || isatty(0));

#ifdef HAVE_AQUA
    /* for Aqua and non-dumb terminal use callbacks instead of connections
       and pretty-print warnings/errors (ESS = dumb terminal) */
    if(useaqua || 
       (R_Interactive && getenv("TERM") && strcmp(getenv("TERM"), "dumb"))) {
	R_Outputfile = NULL;
	R_Consolefile = NULL;
	ptr_R_WriteConsoleEx = Rstd_WriteConsoleEx;
	ptr_R_WriteConsole = NULL;
    } else {
#endif
	R_Outputfile = stdout;
	R_Consolefile = stderr;
#ifdef HAVE_AQUA
    }
#endif


/*
 *  Since users' expectations for save/no-save will differ, we decided
 *  that they should be forced to specify in the non-interactive case.
 */
    if (!R_Interactive && Rp->SaveAction != SA_SAVE &&
	Rp->SaveAction != SA_NOSAVE)
	R_Suicide(_("you must specify '--save', '--no-save' or '--vanilla'"));

    R_setupHistory();
    if (R_RestoreHistory)
	Rstd_read_history(R_HistoryFile);
    fpu_setup(1);

    return(0);
}