/**********************************************************************
* Name : fsa9480_SetManualSW()
* Description : Control FSA9480's Manual SW1 and SW2
*
* Parameter :
* @ valManualSw1 : the value to set SW1
* @ valManualSw2 : the value to set SW2
* Return : None
*
***********************************************************************/
void fsa9480_SetManualSW(unsigned char valManualSw1, unsigned char valManualSw2)
{
unsigned char cont_reg, man_sw1, man_sw2;
DEBUG_FSA9480("[FSA9480]%s \n", __func__);
/*Set Manual switch*/
fsa9480_write(fsa9480_i2c_client, REGISTER_MANUALSW1, valManualSw1);
mdelay(20);
fsa9480_write(fsa9480_i2c_client, REGISTER_MANUALSW2, valManualSw2);
mdelay(20);
/*when detached the cable, Control register automatically be restored.*/
fsa9480_read(fsa9480_i2c_client, REGISTER_CONTROL, &cont_reg);
mdelay(20);
DEBUG_FSA9480("[FSA9480] fsa9480_SetManualSW : [Before]Control Register's value is %s\n",&cont_reg);
/*set switching mode to MANUAL*/
fsa9480_write(fsa9480_i2c_client, REGISTER_CONTROL, 0x1A);
/* Read current setting value , manual sw1, manual sw2, control register.*/
fsa9480_read(fsa9480_i2c_client, REGISTER_MANUALSW1, &man_sw1);
mdelay(20);
DEBUG_FSA9480("[FSA9480] fsa9480_SetManualSW : Manual SW1 Register's value is %s\n",&man_sw1);
fsa9480_read(fsa9480_i2c_client, REGISTER_MANUALSW2, &man_sw2);
mdelay(20);
DEBUG_FSA9480("[FSA9480] fsa9480_SetManualSW : Manual SW2 Register's value is %s\n",&man_sw2);
fsa9480_read(fsa9480_i2c_client, REGISTER_CONTROL, &cont_reg);
DEBUG_FSA9480("[FSA9480] fsa9480_SetManualSW : [After]Control Register's value is %s\n",&cont_reg);
}
void FSA9480_Enable_SPK(u8 enable)
{
struct i2c_client *client = fsa9480_i2c_client;
u8 data = 0;
byte reg_value=0;
byte reg_address=0x0D;
if(enable)
{
DEBUG_FSA9480("FSA9480_Enable_SPK --- enable\n");
msleep(10);
Get_MAX8998_PM_ADDR(reg_address, ®_value, 1); // read 0x0D register
check_reg = reg_value;
reg_value = ((0x2<<5)|reg_value);
check_reg = reg_value;
Set_MAX8998_PM_ADDR(reg_address,®_value,1);
check_reg = reg_value;
msleep(10);
fsa9480_write(client, REGISTER_MANUALSW1, 0x90); // D+/- switching by V_Audio_L/R in HW03
msleep(10);
fsa9480_write(client, REGISTER_CONTROL, 0x1A); //manual switching
}
}
// Called by switch sio driver
void mcirousb_usbpath_change(int usb_path)
{
u8 pData;
fsa9480_read(fsa9480_i2c_client, REGISTER_CONTROL, &pData);
microusb_usbpath = usb_path;
if(usb_path) { // CP USB
if(pData != 0x1A) {
//mdelay(10000);
fsa9480_write(fsa9480_i2c_client, REGISTER_CONTROL, 0x1A);
mdelay(1000);//mdelay(10000);
fsa9480_write(fsa9480_i2c_client, REGISTER_MANUALSW1, 0x90);
mdelay(10);
fsa9480_write(fsa9480_i2c_client, REGISTER_MANUALSW2, 0x10);
mdelay(10);
}
} else { // AP USB
if(pData != 0x1E) {
//mdelay(10000);
fsa9480_write(fsa9480_i2c_client, REGISTER_CONTROL, 0x1E);
}
}
}
static void fsa9480_init(void)
{
u8 data = 0;
fsa9480_read(fsa9480_i2c_client, REGISTER_DEVICEID, &data);
mdelay(10);
fsa9480_write(fsa9480_i2c_client, REGISTER_CONTROL, 0x1E);
mdelay(10);
// Unmask attach/detach interrupt
fsa9480_write(fsa9480_i2c_client, REGISTER_INTERRUPTMASK1, 0xFC);
fsa9480_write(fsa9480_i2c_client, REGISTER_INTERRUPTMASK2, 0xFF);
mdelay(10);
// Mask CARKIT all interrupt
fsa9480_write(fsa9480_i2c_client, REGISTER_CARKITMASK1, 0xFF);
fsa9480_write(fsa9480_i2c_client, REGISTER_CARKITMASK2, 0xFF);
mdelay(10);
fsa9480_read(fsa9480_i2c_client, REGISTER_DEVICETYPE1, &fsa9480_device1);
mdelay(10);
fsa9480_read(fsa9480_i2c_client, REGISTER_DEVICETYPE2, &fsa9480_device2);
}
static void FSA9480_ReadIntRegister(struct work_struct * work)
{
u8 interrupt1 , device1, device2, temp;
DEBUG_FSA9480("[FSA9480] %s\n", __func__);
fsa9480_read( REGISTER_INTERRUPT1, &interrupt1);
msleep(5);
fsa9480_read( REGISTER_DEVICETYPE1, &device1);
msleep(5);
fsa9480_read( REGISTER_DEVICETYPE2, &device2);
usb_state = (device2 << 8) | (device1 << 0);
if((interrupt1 & FSA9480_INT1_ATTACH) ||
(FSA9480_Get_JIG_Status() && maxim_lpm_chg_status()))
{
fsa9480_device1 = device1;
fsa9480_device2 = device2;
if(fsa9480_device1 != FSA9480_DEV_TY1_DED_CHG) {
s3c_usb_cable(USB_CABLE_ATTACHED);
}
if(fsa9480_device1&FSA9480_DEV_TY1_CAR_KIT)
{
msleep(5);
fsa9480_write( REGISTER_CARKITSTATUS, 0x02);
msleep(5);
fsa9480_read( REGISTER_CARKITINT1, &temp);
}
}
msleep(5);
fsa9480_write( REGISTER_CONTROL, 0x1E);
fsa9480_write( REGISTER_INTERRUPTMASK1, 0xFC);
FSA9480_ProcessDevice(fsa9480_device1, fsa9480_device2, interrupt1);
if((interrupt1 & FSA9480_INT1_DETACH) ||
(FSA9480_Get_JIG_Status() && !maxim_lpm_chg_status()))
{
if(fsa9480_device1 != FSA9480_DEV_TY1_DED_CHG) {
s3c_usb_cable(USB_CABLE_DETACHED);
}
fsa9480_device1 = 0;
fsa9480_device2 = 0;
}
enable_irq(IRQ_FSA9480_INTB);
}
static void fsa9480_chip_init(void)
{
u8 data = 0;
//Enable this code if the below fsa9480_write() becomes active.
//and make a synch with p1.c of SBL.
#if 0// def CONFIG_KERNEL_DEBUG_SEC
#if defined(CONFIG_TARGET_LOCALE_VZW) || defined(CONFIG_TARGET_LOCALE_SPR)
u8 skip_dummy = 0;
unsigned int upload_code = __raw_readl(S5P_INFORM6);
if((upload_code & KERNEL_SEC_UPLOAD_CAUSE_MASK) == BLK_UART_MSG_FOR_FACTRST_2ND_ACK) {
skip_dummy = 1;
upload_code &= (~KERNEL_SEC_UPLOAD_CAUSE_MASK);
__raw_writel(upload_code , S5P_INFORM6);
}
if(skip_dummy == 0) {
//iks.kim : fsa9480 reset blocked temporarily (charger detection problem)
//fsa9480_write(&fsa9480_i2c_client, HIDDEN_REGISTER_MANUAL_OVERRDES1, 0x01); //RESET
}
#endif
#endif //CONFIG_KERNEL_DEBUG_SEC
//iks.kim : fsa9480 reset blocked temporarily (charger detection problem)
//fsa9480_write(&fsa9480_i2c_client, HIDDEN_REGISTER_MANUAL_OVERRDES1, 0x01); //RESET
mdelay(10);
fsa9480_read( REGISTER_DEVICEID, &data);
mdelay(10);
fsa9480_write( REGISTER_CONTROL, 0x1E);
mdelay(10);
fsa9480_write( REGISTER_INTERRUPTMASK1, 0xFC);
mdelay(10);
fsa9480_read( REGISTER_DEVICETYPE1, &fsa9480_device1);
mdelay(10);
fsa9480_read( REGISTER_DEVICETYPE2, &fsa9480_device2);
#ifdef CONFIG_TARGET_LOCALE_VZW
/* update usb state */
usb_state = (fsa9480_device2 << 8) | (fsa9480_device1 << 0);
#endif
}
/**********************************************************************
* Name : fsa9480_SetAutoSWMode()
* Description : Set FSA9480 with Auto Switching Mode.
*
* Parameter : None
* @
* @
* Return : None
*
***********************************************************************/
void fsa9480_SetAutoSWMode(void)
{
DEBUG_FSA9480("[FSA9480]%s\n ", __func__);
/*set Auto Swithing mode */
fsa9480_write(fsa9480_i2c_client, REGISTER_CONTROL, 0x1E);
}
void FSA9480_Set_ID_Switch(int sel)
{
u8 data = 0;
printk("[FSA9480] %s: select (%d)\n", __func__, sel);
fsa9480_read( REGISTER_MANUALSW2, &data);
data &= ~(0x3);
switch(sel)
{
case 1: // ID connected to video
data |= 0x1;
break;
case 2: // ID connected to bypass port
data |= 0x2;
break;
case 0: // Open all switch
default:
break;
}
fsa9480_write( REGISTER_MANUALSW2, data);
fsa9480_read( REGISTER_MANUALSW2, &data);
printk("[FSA9480] %s: MANUALSW2 (0x%x)\n", __func__, data);
}
/**********************************************************************
* Name : fsa9480_MakeRxdLow()
* Description : Make UART port to OPEN state.
*
* Parameter : None
* @
* @
* Return : None
*
***********************************************************************/
void fsa9480_MakeRxdLow(void)
{
unsigned char hidden_reg;
DEBUG_FSA9480("[FSA9480]%s\n ", __func__);
fsa9480_write(fsa9480_i2c_client, HIDDEN_REGISTER_MANUAL_OVERRDES1, 0x0a);
mdelay(20);
fsa9480_read(fsa9480_i2c_client, HIDDEN_REGISTER_MANUAL_OVERRDES1, &hidden_reg);
fsa9480_SetManualSW(0x00, 0x00);
}
void FSA9480_Enable_CP_USB(u8 enable)
{
struct i2c_client *client = fsa9480_i2c_client;
byte reg_value=0;
byte reg_address=0x0D;
if(enable)
{
printk("[FSA9480_Enable_CP_USB] Enable CP USB\n");
mdelay(10);
Get_MAX8998_PM_ADDR(reg_address, ®_value, 1); // read 0x0D register
check_reg = reg_value;
reg_value = ((0x2<<5)|reg_value);
check_reg = reg_value;
Set_MAX8998_PM_ADDR(reg_address,®_value,1);
check_reg = reg_value;
mdelay(10);
#if defined(CONFIG_GALAXY_I897)
fsa9480_write(client, REGISTER_MANUALSW1, 0x90); // D+/- switching by Audio_L/R
#else
fsa9480_write(client, REGISTER_MANUALSW1, 0x48); // D+/- switching by Audio_L/R in HW04
#endif
mdelay(10);
fsa9480_write(client, REGISTER_CONTROL, 0x1A);
}
else
{
printk("[FSA9480_Enable_AP_USB] Enable AP USB\n");
Get_MAX8998_PM_ADDR(reg_address, ®_value, 1); // read 0x0D register
if(askonstatus||mtp_mode_on)
ap_usb_power_on(0);
else
ap_usb_power_on(1);
mdelay(10);
fsa9480_write(client, REGISTER_CONTROL, 0x1E);
}
}
void fsa9480_chip_init(void)
{
struct i2c_client *client = fsa9480_i2c_client;
fsa9480_write(client, HIDDEN_REGISTER_MANUAL_OVERRDES1, 0x01); //RESET
mdelay(10);
fsa9480_write(client, REGISTER_CONTROL, 0x1E);
mdelay(10);
fsa9480_write(client, REGISTER_INTERRUPTMASK1, 0xFC);
mdelay(10);
fsa9480_read(client, REGISTER_DEVICETYPE1, &fsa9480_device1);
mdelay(10);
fsa9480_read(client, REGISTER_DEVICETYPE2, &fsa9480_device2);
}
void FSA9480_ChangePathToAudio(u8 enable)
{
u8 manualsw1;
if(enable)
{
mdelay(10);
fsa9480_write( REGISTER_MANUALSW1, 0x48);
mdelay(10);
fsa9480_write( REGISTER_CONTROL, 0x1A);
fsa9480_read( REGISTER_MANUALSW1, &manualsw1);
printk("Fsa9480 ManualSW1 = 0x%x\n",manualsw1);
}
else
{
mdelay(10);
fsa9480_write( REGISTER_CONTROL, 0x1E);
}
}
void FSA9480_Enable_CP_USB(u8 enable)
{
byte reg_value=0;
byte reg_address=0x0D;
if(enable)
{
printk("[FSA9480_Enable_CP_USB] Enable CP USB\n");
mdelay(10);
Get_MAX8998_PM_ADDR(reg_address, ®_value, 1); // read 0x0D register
check_reg = reg_value;
reg_value = ((0x2<<5)|reg_value);
check_reg = reg_value;
Set_MAX8998_PM_ADDR(reg_address,®_value,1);
check_reg = reg_value;
mdelay(10);
fsa9480_write( REGISTER_MANUALSW1, 0x90);
mdelay(10);
fsa9480_write( REGISTER_CONTROL, 0x1A);
}
else
{
printk("[FSA9480_Enable_AP_USB] Enable AP USB\n");
Get_MAX8998_PM_ADDR(reg_address, ®_value, 1); // read 0x0D register
if(askonstatus||mtp_mode_on)
ap_usb_power_on(0);
else
ap_usb_power_on(1);
mdelay(10);
fsa9480_write( REGISTER_CONTROL, 0x1E);
}
}
static int fsa9480_codec_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct fsa9480_state *state;
struct device *dev = &client->dev;
u8 pData;
DEBUG_FSA9480("[FSA9480] %s\n", __func__);
s3c_gpio_cfgpin(GPIO_USB_SW_SCL, S3C_GPIO_OUTPUT);
s3c_gpio_setpull(GPIO_USB_SW_SCL, S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(GPIO_USB_SW_SDA, S3C_GPIO_OUTPUT);
s3c_gpio_setpull(GPIO_USB_SW_SDA, S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(GPIO_UART_SEL, S3C_GPIO_OUTPUT );
s3c_gpio_setpull(GPIO_UART_SEL, S3C_GPIO_PULL_NONE);
user_switch_init();
init_waitqueue_head(&usb_detect_waitq);
INIT_WORK(&fsa9480_work, FSA9480_ReadIntRegister);
fsa9480_workqueue = create_singlethread_workqueue("fsa9480_workqueue");
state = kzalloc(sizeof(struct fsa9480_state), GFP_KERNEL);
if(!state) {
dev_err(dev, "%s: failed to create fsa9480_state\n", __func__);
return -ENOMEM;
}
state->client = client;
fsa9480_i2c_client = client;
i2c_set_clientdata(client, state);
if(!fsa9480_i2c_client)
{
dev_err(dev, "%s: failed to create fsa9480_i2c_client\n", __func__);
return -ENODEV;
}
/*clear interrupt mask register*/
fsa9480_read( REGISTER_CONTROL, &pData);
fsa9480_write( REGISTER_CONTROL, pData & ~INT_MASK);
fsa9480_interrupt_init();
fsa9480_chip_init();
return 0;
}
static int fsa9480_modify(struct i2c_client *client, u8 reg, u8 data, u8 mask)
{
u8 original_value, modified_value;
fsa9480_read(client, reg, &original_value);
mdelay(10);
modified_value = ((original_value&~mask) | data);
fsa9480_write(client, reg, modified_value);
mdelay(10);
return 0;
}
static int fsa9480_modify(struct i2c_client *client, u8 reg, u8 data, u8 mask)
{
u8 original_value, modified_value;
fsa9480_read(client, reg, &original_value);
mdelay(10);
DEBUG_FSA9480("[FSA9480] %s Original value is 0x%02x\n ",__func__, original_value);
modified_value = ((original_value&~mask) | data);
DEBUG_FSA9480("[FSA9480] %s modified value is 0x%02x\n ",__func__, modified_value);
fsa9480_write(client, reg, modified_value);
mdelay(10);
return 0;
}
static int fsa9480_resume(struct i2c_client *client)
{
#ifdef FEATURE_FTM_SLEEP
if(ftm_sleep)
{
#ifdef CONFIG_ARCH_OMAP34XX
if(wakeup_timer_seconds)
#endif
{
#ifdef CONFIG_ARCH_OMAP34XX
wakeup_timer_seconds = 0;
#endif
/*set Auto Swithing mode */
fsa9480_write(fsa9480_i2c_client, REGISTER_CONTROL, 0x1E);
}
}
#endif
return 0;
}
static int fsa9480_codec_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct fsa9480_state *state;
struct device *dev = &client->dev;
u8 pData;
DEBUG_FSA9480("[FSA9480] %s\n", __func__);
s3c_gpio_cfgpin(GPIO_USB_SCL_28V, S3C_GPIO_OUTPUT);
s3c_gpio_setpull(GPIO_USB_SCL_28V, S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(GPIO_USB_SDA_28V, S3C_GPIO_OUTPUT);
s3c_gpio_setpull(GPIO_USB_SDA_28V, S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(GPIO_UART_SEL, S3C_GPIO_OUTPUT );
s3c_gpio_setpull(GPIO_UART_SEL, S3C_GPIO_PULL_NONE);
if (device_create_file(switch_dev, &dev_attr_uart_sel) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_uart_sel.attr.name);
if (device_create_file(switch_dev, &dev_attr_usb_sel) < 0)
DEBUG_FSA9480("[FSA9480]Failed to create device file(%s)!\n", dev_attr_usb_sel.attr.name);
if (device_create_file(switch_dev, &dev_attr_usb_state) < 0)
DEBUG_FSA9480("[FSA9480]Failed to create device file(%s)!\n", dev_attr_usb_state.attr.name);
#if 1
if (device_create_file(switch_dev, &dev_attr_DMport) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_DMport.attr.name);
if (device_create_file(switch_dev, &dev_attr_DMlog) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_DMlog.attr.name);
#endif
if (device_create_file(switch_dev, &dev_attr_UsbMenuSel) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_UsbMenuSel.attr.name);
if (device_create_file(switch_dev, &dev_attr_AskOnMenuSel) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_AskOnMenuSel.attr.name);
if (device_create_file(switch_dev, &dev_attr_Mtp) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_Mtp.attr.name);
if (device_create_file(switch_dev, &dev_attr_SwitchingInitValue) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_SwitchingInitValue.attr.name);
if (device_create_file(switch_dev, &dev_attr_FactoryResetValue) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_FactoryResetValue.attr.name);
if (device_create_file(switch_dev, &dev_attr_AskOnStatus) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_AskOnStatus.attr.name);
if (device_create_file(switch_dev, &dev_attr_MtpInitStatusSel) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_MtpInitStatusSel.attr.name);
if (device_create_file(switch_dev, &dev_attr_AskInitStatusSel) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_AskInitStatusSel.attr.name);
if (device_create_file(switch_dev, &dev_attr_tethering) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_tethering.attr.name);
if (device_create_file(switch_dev, &dev_attr_dock) < 0)
pr_err("Failed to create device file(%s)!\n", dev_attr_dock.attr.name);
init_waitqueue_head(&usb_detect_waitq);
INIT_WORK(&fsa9480_work, FSA9480_ReadIntRegister);
fsa9480_workqueue = create_singlethread_workqueue("fsa9480_workqueue");
state = kzalloc(sizeof(struct fsa9480_state), GFP_KERNEL);
if(!state) {
dev_err(dev, "%s: failed to create fsa9480_state\n", __func__);
return -ENOMEM;
}
indicator_dev.name = DRIVER_NAME;
indicator_dev.print_name = print_switch_name;
indicator_dev.print_state = print_switch_state;
switch_dev_register(&indicator_dev);
state->client = client;
fsa9480_i2c_client = client;
i2c_set_clientdata(client, state);
if(!fsa9480_i2c_client)
{
dev_err(dev, "%s: failed to create fsa9480_i2c_client\n", __func__);
return -ENODEV;
}
/*clear interrupt mask register*/
fsa9480_read(fsa9480_i2c_client, REGISTER_CONTROL, &pData);
fsa9480_write(fsa9480_i2c_client, REGISTER_CONTROL, pData & ~INT_MASK);
fsa9480_interrupt_init();
fsa9480_chip_init();
INIT_DELAYED_WORK(&micorusb_init_work, connectivity_switching_init);
schedule_delayed_work(&micorusb_init_work, msecs_to_jiffies(200));
return 0;
}
void microusb_init(void)
{
#define I2C_READ_RETRY_MAX 2
int ret = 0;
int read_retry;
u8 device1;
u8 device2;
u8 interrupt1;
u8 interrupt2;
u8 attach = FSA9480_INT1_ATTACH;
for(read_retry = 0; read_retry < I2C_READ_RETRY_MAX; read_retry++) {
device1 = 0;
if(fsa9480_read(fsa9480_i2c_client, REGISTER_DEVICETYPE1, &device1) == 0) {
break;
}
}
for(read_retry = 0; read_retry < I2C_READ_RETRY_MAX; read_retry++) {
device2 = 0;
if(fsa9480_read(fsa9480_i2c_client, REGISTER_DEVICETYPE2, &device2) == 0) {
break;
}
}
if(microusb_usbpath > 0) // if CP USB
{
fsa9480_write(fsa9480_i2c_client, REGISTER_CONTROL, 0x1A);
mdelay(10);
fsa9480_write(fsa9480_i2c_client, REGISTER_MANUALSW1, 0x90);
mdelay(10);
fsa9480_write(fsa9480_i2c_client, REGISTER_MANUALSW2, 0x10);
mdelay(10);
}
else
{
if(device1 && (device1 != FSA9480_DEV_TY1_DED_CHG)) {
attach = FSA9480_INT1_ATTACH;
}
if(device1 == 0 && device2 == 0) {
device1 = FSA9480_DEV_TY1_USB;
attach = FSA9480_INT1_DETACH;
}
fsa9480_device1 = device1;
fsa9480_device2 = device2;
fsa9480_process_device(fsa9480_device1, fsa9480_device2, attach);
fsa9480_init();
}
// clear interrupt
fsa9480_read(fsa9480_i2c_client, REGISTER_INTERRUPT1, &interrupt1);
msleep(5);
fsa9480_read(fsa9480_i2c_client, REGISTER_INTERRUPT2, &interrupt2);
msleep(5);
fsa9480_interrupt_init(fsa9480_i2c_client->irq, fsa9480_i2c_device_id);
}
static void fsa9480_read_int_register(struct work_struct *work)
{
u8 interrupt1 , interrupt2, device1, device2, temp;
DEBUG_FSA9480("fsa9480_read_int_register function!!!!\n");
fsa9480_read(fsa9480_i2c_client, REGISTER_INTERRUPT1, &interrupt1);
mdelay(10);
fsa9480_read(fsa9480_i2c_client, REGISTER_INTERRUPT2, &interrupt2);
mdelay(10);
fsa9480_read(fsa9480_i2c_client, REGISTER_DEVICETYPE1, &device1);
mdelay(10);
fsa9480_read(fsa9480_i2c_client, REGISTER_DEVICETYPE2, &device2);
if(interrupt1 & FSA9480_INT1_ATTACH)
{
fsa9480_device1 = device1;
fsa9480_device2 = device2;
if(fsa9480_device1 & FSA9480_DEV_TY1_CAR_KIT)
{
mdelay(10);
fsa9480_write(fsa9480_i2c_client, REGISTER_CARKITSTATUS, 0x02);
mdelay(10);
fsa9480_read(fsa9480_i2c_client, REGISTER_CARKITINT1, &temp);
}
}
mdelay(10);
if(microusb_usbpath > 0) // if CP USB
{
fsa9480_write(fsa9480_i2c_client, REGISTER_CONTROL, 0x1A);
mdelay(10);
fsa9480_write(fsa9480_i2c_client, REGISTER_MANUALSW1, 0x90);
mdelay(10);
fsa9480_write(fsa9480_i2c_client, REGISTER_MANUALSW2, 0x10);
mdelay(10);
}
else
{
fsa9480_write(fsa9480_i2c_client, REGISTER_CONTROL, 0x1E);
wake_up_interruptible(&usb_detect_waitq);
fsa9480_process_device(fsa9480_device1, fsa9480_device2, interrupt1);
}
fsa9480_write(fsa9480_i2c_client, REGISTER_INTERRUPTMASK1, 0xFC);
if(interrupt1 & FSA9480_INT1_DETACH)
{
fsa9480_device1 = 0;
fsa9480_device2 = 0;
}
enable_irq(fsa9480_i2c_client->irq);
wake_lock_timeout(&fsa9480_wake_lock, 3*HZ);
}
void FSA9480_ReadIntRegister(struct work_struct *work)
{
struct i2c_client *client = fsa9480_i2c_client;
u8 interrupt1 ,interrupt2 ,device1, device2, temp;
DEBUG_FSA9480("[FSA9480] %s\n", __func__);
fsa9480_read(client, REGISTER_INTERRUPT1, &interrupt1);
msleep(5);
fsa9480_read(client, REGISTER_INTERRUPT2, &interrupt2);
msleep(5);
fsa9480_read(client, REGISTER_DEVICETYPE1, &device1);
msleep(5);
fsa9480_read(client, REGISTER_DEVICETYPE2, &device2);
usb_state = (device2 << 8) | (device1 << 0);
if(interrupt1 & FSA9480_INT1_ATTACH)
{
fsa9480_device1 = device1;
fsa9480_device2 = device2;
if(fsa9480_device1 != FSA9480_DEV_TY1_DED_CHG) {
//DEBUG_FSA9480("FSA9480_enable LDO8\n");
s3c_usb_cable(1);
}
if(fsa9480_device1&FSA9480_DEV_TY1_CAR_KIT)
{
msleep(5);
fsa9480_write(client, REGISTER_CARKITSTATUS, 0x02);
msleep(5);
fsa9480_read(client, REGISTER_CARKITINT1, &temp);
}
}
msleep(5);
fsa9480_write(client, REGISTER_CONTROL, 0x1E);
fsa9480_write(client, REGISTER_INTERRUPTMASK1, 0xFC);
#if defined(CONFIG_ARIES_NTT) // Modify NTTS1
//syyoon 20100724 fix for SC - Ad_10_2nd - 0006. When USB is removed, sometimes attatch value gets 0x00
if((fsa9480_device1 == FSA9480_DEV_TY1_USB) && (!interrupt1)) {
printk("[FSA9480] dev1=usb, attach change is from 0 to 2\n");
interrupt1 = FSA9480_INT1_DETACH;
}
#endif
FSA9480_ProcessDevice(fsa9480_device1, fsa9480_device2, interrupt1);
if(interrupt1 & FSA9480_INT1_DETACH)
{
if(fsa9480_device1 != FSA9480_DEV_TY1_DED_CHG) {
//DEBUG_FSA9480("FSA9480_disable LDO8\n");
s3c_usb_cable(0);
}
fsa9480_device1 = 0;
fsa9480_device2 = 0;
}
enable_irq(IRQ_FSA9480_INTB);
}