C++ (Cpp) ft_pci_setup Exemples

Exemple #1

Fichier : sbc8349.c Projet : 12thmantec/u-boot-novena-spl

void ft_board_setup(void *blob, bd_t *bd)
{
	ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
	ft_pci_setup(blob, bd);
#endif
}

Exemple #2

Fichier : fdt.c Projet : 96boards-bubblegum/u-boot

void ft_cpu_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_MP
	ft_fixup_cpu(blob);
#endif

#ifdef CONFIG_SYS_NS16550
	do_fixup_by_compat_u32(blob, "fsl,ns16550",
			       "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
#endif

	do_fixup_by_compat_u32(blob, "fixed-clock",
			       "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);

#ifdef CONFIG_PCI
	ft_pci_setup(blob, bd);
#endif

#ifdef CONFIG_FSL_ESDHC
	fdt_fixup_esdhc(blob, bd);
#endif

#ifdef CONFIG_FSL_LSCH3
	fdt_fixup_smmu(blob);
#endif

#ifdef CONFIG_SYS_DPAA_FMAN
	fdt_fixup_fman_firmware(blob);
#endif
}

Exemple #3

Fichier : mpc837xerdb.c Projet : dsdbook/dsd_sopc

void ft_board_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_PCI
	ft_pci_setup(blob, bd);
#endif
	ft_cpu_setup(blob, bd);
	fdt_fixup_dr_usb(blob, bd);
}

Exemple #4

Fichier : cds_pci_ft.c Projet : 01hyang/u-boot

int ft_board_setup(void *blob, bd_t *bd)
{
	ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
	ft_pci_setup(blob, bd);
	cds_pci_fixup(blob);
#endif

	return 0;
}

Exemple #5

Fichier : fdt.c Projet : analogdevicesinc/u-boot-xlnx

void ft_cpu_setup(void *blob, bd_t *bd)
{
	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
	unsigned int svr = gur_in32(&gur->svr);

	/* delete crypto node if not on an E-processor */
	if (!IS_E_PROCESSOR(svr))
		fdt_fixup_crypto_node(blob, 0);
#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
	else {
		ccsr_sec_t __iomem *sec;

#ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
		if (fdt_fixup_kaslr(blob))
			fdt_fixup_remove_jr(blob);
#endif

		sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
		fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
	}
#endif

#ifdef CONFIG_MP
	ft_fixup_cpu(blob);
#endif

#ifdef CONFIG_SYS_NS16550
	do_fixup_by_compat_u32(blob, "fsl,ns16550",
			       "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
#endif

	do_fixup_by_path_u32(blob, "/sysclk", "clock-frequency",
			     CONFIG_SYS_CLK_FREQ, 1);

#ifdef CONFIG_PCI
	ft_pci_setup(blob, bd);
#endif

#ifdef CONFIG_FSL_ESDHC
	fdt_fixup_esdhc(blob, bd);
#endif

#ifdef CONFIG_SYS_DPAA_FMAN
	fdt_fixup_fman_firmware(blob);
#endif
#ifndef CONFIG_ARCH_LS1012A
	fsl_fdt_disable_usb(blob);
#endif
#ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN
	fdt_fixup_gic(blob);
#endif
#ifdef CONFIG_HAS_FEATURE_ENHANCED_MSI
	fdt_fixup_msi(blob);
#endif
}

Exemple #6

Fichier : mpc837xerdb.c Projet : OpenNoah/u-boot

int ft_board_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_PCI
	ft_pci_setup(blob, bd);
#endif
	ft_cpu_setup(blob, bd);
	fsl_fdt_fixup_dr_usb(blob, bd);
	fdt_fixup_esdhc(blob, bd);

	return 0;
}

Exemple #7

Fichier : mpc8360emds.c Projet : Admetric/android_u-boot_s5pv210

void ft_board_setup(void *blob, bd_t *bd)
{
	const immap_t *immr = (immap_t *)CFG_IMMR;

	ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
	ft_pci_setup(blob, bd);
#endif
	/*
	 * mpc8360ea pb mds errata 2: RGMII timing
	 * if on mpc8360ea rev. 2.1,
	 * change both ucc phy-connection-types from rgmii-id to rgmii-rxid
	 */
	if ((REVID_MAJOR(immr->sysconf.spridr) == 2) &&
	    (REVID_MINOR(immr->sysconf.spridr) == 1)) {
		int nodeoffset;
		const char *prop;
		int path;

		nodeoffset = fdt_path_offset(blob, "/aliases");
		if (nodeoffset >= 0) {
#if defined(CONFIG_HAS_ETH0)
			/* fixup UCC 1 if using rgmii-id mode */
			prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
			if (prop) {
				path = fdt_path_offset(blob, prop);
				prop = fdt_getprop(blob, path,
				                   "phy-connection-type", 0);
				if (prop && (strcmp(prop, "rgmii-id") == 0))
					fdt_setprop(blob, path,
					            "phy-connection-type",
					            "rgmii-rxid",
					            sizeof("rgmii-rxid"));
			}
#endif
#if defined(CONFIG_HAS_ETH1)
			/* fixup UCC 2 if using rgmii-id mode */
			prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
			if (prop) {
				path = fdt_path_offset(blob, prop);
				prop = fdt_getprop(blob, path,
				                   "phy-connection-type", 0);
				if (prop && (strcmp(prop, "rgmii-id") == 0))
					fdt_setprop(blob, path,
					            "phy-connection-type",
					            "rgmii-rxid",
					            sizeof("rgmii-rxid"));
			}
#endif
		}
	}
}

Exemple #8

Fichier : mpc837xemds.c Projet : 54shady/uboot_tiny4412

void ft_board_setup(void *blob, bd_t *bd)
{
	ft_cpu_setup(blob, bd);
	ft_tsec_fixup(blob, bd);
	fdt_fixup_dr_usb(blob, bd);
	fdt_fixup_esdhc(blob, bd);
#ifdef CONFIG_PCI
	ft_pci_setup(blob, bd);
	if (board_pci_host_broken())
		ft_pci_fixup(blob, bd);
	ft_pcie_fixup(blob, bd);
#endif
}

Exemple #9

Fichier : mpc8349emds.c Projet : bingbuidea/u-boot-sh4-1.3.1_stm23_0045

void ft_board_setup(void *blob, bd_t *bd)
{
#if defined(CONFIG_OF_FLAT_TREE)
	u32 *p;
	int len;

	p = ft_get_prop(blob, "/memory/reg", &len);
	if (p != NULL) {
		*p++ = cpu_to_be32(bd->bi_memstart);
		*p = cpu_to_be32(bd->bi_memsize);
	}
#endif
	ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
	ft_pci_setup(blob, bd);
#endif
}

Exemple #10

Fichier : fdt.c Projet : Digilent/u-boot-digilent

void ft_cpu_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_FSL_LSCH2
	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
	unsigned int svr = in_be32(&gur->svr);

	/* delete crypto node if not on an E-processor */
	if (!IS_E_PROCESSOR(svr))
		fdt_fixup_crypto_node(blob, 0);
#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
	else {
		ccsr_sec_t __iomem *sec;

		sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
		fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
	}
#endif
#endif

#ifdef CONFIG_MP
	ft_fixup_cpu(blob);
#endif

#ifdef CONFIG_SYS_NS16550
	do_fixup_by_compat_u32(blob, "fsl,ns16550",
			       "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
#endif

	do_fixup_by_compat_u32(blob, "fixed-clock",
			       "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);

#ifdef CONFIG_PCI
	ft_pci_setup(blob, bd);
#endif

#ifdef CONFIG_FSL_ESDHC
	fdt_fixup_esdhc(blob, bd);
#endif

#ifdef CONFIG_SYS_DPAA_FMAN
	fdt_fixup_fman_firmware(blob);
#endif
	fsl_fdt_disable_usb(blob);

}

Exemple #11

Fichier : ft_board.c Projet : bingbuidea/u-boot-sh4-1.3.1_stm23_0045

void
ft_board_setup(void *blob, bd_t *bd)
{
	u32 *p;
	int len;

#ifdef CONFIG_PCI
	ft_pci_setup(blob, bd);
#endif
	ft_cpu_setup(blob, bd);

	p = ft_get_prop(blob, "/memory/reg", &len);
	if (p != NULL) {
		*p++ = cpu_to_be32(bd->bi_memstart);
		*p = cpu_to_be32(bd->bi_memsize);
	}

	cds_pci_fixup(blob);
}

Exemple #12

Fichier : mpc8360erdk.c Projet : 5victor/u-boot-mini2440

void ft_board_setup(void *blob, bd_t *bd)
{
	ft_cpu_setup(blob, bd);
	ft_pci_setup(blob, bd);
}

Exemple #13

Fichier : mergerbox.c Projet : chinyeungli/u-boot

void ft_board_setup(void *blob, bd_t *bd)
{
    ft_cpu_setup(blob, bd);
    fdt_fixup_dr_usb(blob, bd);
    ft_pci_setup(blob, bd);
}