static int mt_reset(int *dummy)
{
TRACE_FUN(ft_t_flow);
(void)ftape_seek_to_bot();
TRACE_CATCH(ftape_reset_drive(),
zft_init_driver(); zft_uninit_mem(); zft_offline = 1);
/* fake a re-open of the device. This will set all flage and
* allocate buffers as appropriate. The new tape condition will
* force the open routine to do anything we need.
*/
TRACE_CATCH(_zft_open(-1 /* fake reopen */, 0 /* dummy */),);
TRACE_EXIT 0;
}
int ftape_get_drive_status(void)
{
int result;
int status;
TRACE_FUN(ft_t_flow);
ft_no_tape = ft_write_protected = 0;
/* Tape drive is activated now.
* First clear error status if present.
*/
do {
result = ftape_ready_wait(ftape_timeout.reset, &status);
if (result < 0) {
if (result == -ETIME) {
TRACE(ft_t_err, "ftape_ready_wait timeout");
} else if (result == -EINTR) {
TRACE(ft_t_err, "ftape_ready_wait aborted");
} else {
TRACE(ft_t_err, "ftape_ready_wait failed");
}
TRACE_EXIT -EIO;
}
/* Clear error condition (drive is ready !)
*/
if (status & QIC_STATUS_ERROR) {
unsigned int error;
qic117_cmd_t command;
TRACE(ft_t_err, "error status set");
result = ftape_report_error(&error, &command, 1);
if (result < 0) {
TRACE(ft_t_err,
"report_error_code failed: %d", result);
/* hope it's working next time */
ftape_reset_drive();
TRACE_EXIT -EIO;
} else if (error != 0) {
TRACE(ft_t_noise, "error code : %d", error);
TRACE(ft_t_noise, "error command: %d", command);
}
}
if (status & QIC_STATUS_NEW_CARTRIDGE) {
unsigned int error;
qic117_cmd_t command;
const ft_trace_t old_tracing = TRACE_LEVEL;
SET_TRACE_LEVEL(ft_t_bug);
/* Undocumented feature: Must clear (not present!)
* error here or we'll fail later.
*/
ftape_report_error(&error, &command, 1);
SET_TRACE_LEVEL(old_tracing);
TRACE(ft_t_info, "status: new cartridge");
ft_new_tape = 1;
} else {
ft_new_tape = 0;
}
FT_SIGNAL_EXIT(_DONT_BLOCK);
} while (status & QIC_STATUS_ERROR);
ft_no_tape = !(status & QIC_STATUS_CARTRIDGE_PRESENT);
ft_write_protected = (status & QIC_STATUS_WRITE_PROTECT) != 0;
if (ft_no_tape) {
TRACE(ft_t_warn, "no cartridge present");
} else {
if (ft_write_protected) {
TRACE(ft_t_noise, "Write protected cartridge");
}
}
TRACE_EXIT 0;
}
/* IOCTL routine called by kernel-interface code
*/
int _ftape_ioctl(unsigned int command, void *arg)
{
TRACE_FUN(8, "ftape_ioctl");
int result = EINVAL;
union {
struct mtop mtop;
struct mtget mtget;
} krnl_arg;
int arg_size = (command & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
/* This check will only catch arguments that are too large !
*/
if ((command & IOC_INOUT) && arg_size > sizeof(krnl_arg)) {
TRACEi(1, "bad argument size:", arg_size);
TRACE_EXIT;
return -EINVAL;
}
if (command & IOC_IN) {
int error = verify_area(VERIFY_READ, arg, arg_size);
if (error) {
TRACE_EXIT;
return error;
}
memcpy_fromfs(&krnl_arg.mtop, arg, arg_size);
}
TRACEx1(5, "called with ioctl command: 0x%08x", command);
switch (command) {
/* cpio compatibility
* mtrasx and mtreset are mt extension by Hennus Bergman
* mtseek and mttell are mt extension by eddy olk
*/
case MTIOCTOP:
TRACEx1(5, "calling MTIOCTOP command: 0x%08x", krnl_arg.mtop.mt_op);
switch (krnl_arg.mtop.mt_op) {
case MTNOP:
/* gnu mt calls MTNOP before MTIOCGET to set status */
result = 0;
break;
case MTRESET:
result = ftape_reset_drive();
init_drive_needed = 1;
if (result < 0 || ftape_offline) {
break;
}
result = ftape_seek_to_bot();
ftape_reset_position();
break;
case MTREW:
case MTOFFL:
if (ftape_offline) {
result = -EIO;
break;
}
ftape_flush_buffers();
ftape_update_header_segments(NULL, 1);
result = ftape_seek_to_bot();
ftape_reset_position();
if (krnl_arg.mtop.mt_op == MTOFFL) {
going_offline = 1;
TRACE(4, "Putting tape drive offline");
}
result = 0;
break;
case MTRETEN:
if (ftape_offline) {
result = -EIO;
break;
}
result = ftape_seek_to_eot();
if (result >= 0) {
result = ftape_seek_to_bot();
}
ftape_reset_position();
break;
case MTERASE:
if (ftape_offline) {
result = -EIO;
break;
}
result = ftape_erase();
break;
case MTEOM:
if (ftape_offline) {
result = -EIO;
break;
}
result = ftape_seek_eom();
break;
case MTFSFM:
if (ftape_offline) {
result = -EIO;
break;
}
eof_mark = 1; /* position ready to extend */
case MTFSF:
if (ftape_offline) {
result = -EIO;
break;
}
result = ftape_seek_eof(krnl_arg.mtop.mt_count);
break;
case MTBSFM:
if (ftape_offline) {
result = -EIO;
break;
}
eof_mark = 1; /* position ready to extend */
case MTBSF:
if (ftape_offline) {
result = -EIO;
break;
}
result = ftape_seek_eof(-krnl_arg.mtop.mt_count);
break;
case MTFSR:
if (ftape_offline) {
result = -EIO;
break;
}
tracing = krnl_arg.mtop.mt_count;
TRACEx1(2, "tracing set to %d", tracing);
result = 0;
break;
case MTBSR:
if (ftape_offline) {
result = -EIO;
break;
}
#if 0
result = ftape_fix();
#else
result = 0;
#endif
break;
case MTWEOF:
if (ftape_offline) {
result = -EIO;
break;
}
result = ftape_weof(krnl_arg.mtop.mt_count, ftape_seg_pos, 1);
if (result >= 0) {
ftape_seg_pos += krnl_arg.mtop.mt_count - 1;
}
break;
/* MTRASx and MTRESET are mt extension by Hennus Bergman
*/
case MTRAS1:
case MTRAS2:
case MTRAS3:
case MTSEEK:
case MTTELL:
default:
TRACEi(1, "MTIOCTOP sub-command not implemented:", krnl_arg.mtop.mt_op);
result = -EIO;
break;
}
break;
case MTIOCGET:
krnl_arg.mtget.mt_type = drive_type.vendor_id + 0x800000;
krnl_arg.mtget.mt_resid = 0; /* not implemented */
krnl_arg.mtget.mt_dsreg = 0; /* status register */
krnl_arg.mtget.mt_gstat = /* device independent status */
((ftape_offline) ? 0 : GMT_ONLINE(-1L)) |
((write_protected) ? GMT_WR_PROT(-1L) : 0) |
((no_tape) ? GMT_DR_OPEN(-1L) : 0);
krnl_arg.mtget.mt_erreg = ftape_last_error; /* error register */
result = ftape_file_no(&krnl_arg.mtget.mt_fileno,
&krnl_arg.mtget.mt_blkno);
break;
case MTIOCPOS:
TRACE(5, "Mag tape ioctl command: MTIOCPOS");
TRACE(1, "MTIOCPOS command not implemented");
break;
default:
result = -EINVAL;
break;
}
if (command & IOC_OUT) {
int error = verify_area(VERIFY_WRITE, arg, arg_size);
if (error) {
TRACE_EXIT;
return error;
}
memcpy_tofs(arg, &krnl_arg, arg_size);
}
TRACE_EXIT;
return result;
}
int ftape_get_drive_status(int *new_tape, int *no_tape, int *wp_tape)
{
TRACE_FUN(5, "ftape_get_drive_status");
int result;
int status;
*no_tape =
*wp_tape = 0;
/* Tape drive is activated now.
* First clear error status if present.
*/
do {
result = ftape_ready_wait(timeout.reset, &status);
if (result < 0) {
if (result == -ETIME) {
TRACE(1, "ftape_ready_wait timeout");
} else if (result == -EINTR) {
TRACE(1, "ftape_ready_wait aborted");
} else {
TRACE(1, "ftape_ready_wait failed");
}
result = -EIO;
break;
}
/* Clear error condition (drive is ready !)
*/
if (status & QIC_STATUS_ERROR) {
int error;
int command;
TRACE(1, "error status set");
result = ftape_report_error(&error, &command, 1);
if (result < 0) {
TRACEi(1, "report_error_code failed:", result);
ftape_reset_drive(); /* hope it's working next time */
init_drive_needed = 1;
result = -EIO;
break;
} else if (error != 0) {
TRACEi(4, "error code :", error);
TRACEi(4, "error command:", command);
}
}
if (status & QIC_STATUS_NEW_CARTRIDGE) {
int error;
int command;
int old_tracing = tracing;
/* Undocumented feature: Must clear (not present!) error
* here or we'll fail later.
*/
tracing = 0;
ftape_report_error(&error, &command, 1);
tracing = old_tracing;
TRACE(3, "status: new cartridge");
*new_tape = 1;
}
} while (status & QIC_STATUS_ERROR);
*no_tape = !(status & QIC_STATUS_CARTRIDGE_PRESENT);
*wp_tape = (status & QIC_STATUS_WRITE_PROTECT);
if (*no_tape) {
TRACE(1, "no cartridge present");
} else {
if (*wp_tape) {
TRACE(2, "Write protected cartridge");
}
}
TRACE_EXIT;
return result;
}
