void main()
{
int a,b,c,d,max,m;
cout<<"请输入缧旋方阵的维数n(不能大于10):";
cin>>ROW;
cout<<endl;
for(a=1;a<=ROW;a++)
for(b=1;b<=ROW;b++)
array[a][b ]=0;
m=1;
a=d=1;
b=c=ROW;
max=ROW*ROW;
while(m<=max)
{
godown(m,a);
goright(m,b);
goup(m,c);
goleft(m,d);
}
for(a=1;a<=ROW;a++)
{
for(b=1;b<=ROW;b++)
printf("%3d ",array[a][b ]);
cout<<endl;
}
} }
void docommand(char ch)
{
int count;
char dateb[7];
switch (ch)
{
case ARROWR : if (status.stockprice != 3 + 1) exit(0);goright(); break;
case ARROWL : if (status.stockprice != 5 - 1) exit(0);goleft(); break;
case ARROWU : if (status.stockprice != 2 + 2) exit(0);goup(); break;
case ARROWD : if (status.stockprice != 3 + 1) exit(0);godown(); break;
case HOME : leavecell(sys.cell);
if ((sys.screen == SCREEN1 || sys.screen == SCREEN3)
&& page == PAGEDOWN)
{
sys.cell.row = 23;
sys.cell.col = MONTH;
}
else
if (sys.screen == SCREEN2)
{
sys.cell.row = 8;
sys.cell.col = SHARESPER;
}
else
{
sys.cell.row = 8;
sys.cell.col = MONTH;
}
entercell(sys.cell);
break;
case END : leavecell(sys.cell);
if ((sys.screen == SCREEN1 || sys.screen == SCREEN3)
&& page == PAGEDOWN)
{
sys.cell.row = 37;
sys.cell.col = MONTH;
}
else
if (sys.screen == SCREEN2)
{
sys.cell.row = 22;
sys.cell.col = SHARESPER;
}
else
{
sys.cell.row = 22;
sys.cell.col = MONTH;
}
entercell(sys.cell);
break;
case PGUP : if ((sys.screen == SCREEN1 || sys.screen == SCREEN3)
&& page == PAGEDOWN)
{
page = PAGEUP;
if (sys.cell.row >= 8)
sys.cell.row -= 15;
disppage();
}
showall();
entercell(sys.cell);
break;
case PGDN : if ((sys.screen == SCREEN1 || sys.screen == SCREEN3)
&& page == PAGEUP)
{
page = PAGEDOWN;
if (sys.cell.row >= 8)
sys.cell.row += 15;
disppage();
}
showall();
entercell(sys.cell);
break;
case F01 : help();break;
case F02 : demo();
break;
case F03 : demo();
break;
case F04 : sortstatus(); genscreen(); entercell(sys.cell); break;
case F05 :
{
if (drawgraph(choice(6,graphchoice)) < 0)
errormessage("Graphics initialisation error");
genscreen();
showtotals();
entercell(sys.cell);
}
break;
case F06 :
leavecell(sys.cell);
switch (choice(3,screenchoice))
{
case 1 :
if (tosavesys) savesys();
sys.screen = SCREEN1;
page = PAGEUP;
sys.cell.col = MONTH;
sys.cell.row = 8;
sys.display = HELDS;
genscreen();
break;
case 2 :
sys.screen = SCREEN2;
sys.display = HELDS;
page = PAGEUP;
sys.cell.row = 8;
sys.cell.col = EXPIRYDAY;
genscreen();
break;
case 3 :
if (tosavesys) savesys();
sys.cell.col = MONTH;
page = PAGEUP;
sys.screen = SCREEN3;
sys.display = INVVOL;
sys.cell.row = 8;
wait();
if (recalcvolvalues)
calcallvol();
ready();
genscreen();
break;
}
showtotals();
entercell(sys.cell);
break;
case F07 :
switch(choice(3,clearchoice))
{
case 1 : if (sys.cell.row < 8 || sys.screen == SCREEN2) break;
wait();
clearrow();
calcall();
showall();
totals();
entercell(sys.cell);
break;
case 2 : wait();
switch( sys.cell.col)
{
case VOLC :
case VALUEC :
case VOLP :
case DELTAC :
case VALUEP :
case DELTAP:
case SHAREPRICE :break;
case STOCKHELD : status.stockheld = 0; break;
case VOLATILITY : status.volatility = 0.0;break;
case INTEREST : status.interest = 0.0; break;
case DATE :
case YEARMONTH :
case SHARESPER : for (count =0;count <24; count++)
status.sizepay[count].sharesper = 1000;
break;
case EXPIRYDAY :
case DAYSLEFT :
case MONTH : break;
case STRIKE : for (count = 0;count < 30; count++)
{
status.data[count].strike = 0.0;
status.data[count].volc = 0.0;
status.data[count].volp = 0.0;
}
break;
case MARKETC : for (count = 0;count < 30; count++)
{
status.data[count].marketc = 0.0;
status.data[count].volc = 0.0;
}
break;
case HELDC : for (count = 0;count < 30; count++)
status.data[count].heldc = 0;
break;
case MARKETP : for (count = 0;count < 30; count++)
{
status.data[count].marketp = 0.0;
status.data[count].volp = 0.0;
}
break;
case HELDP : for (count = 0;count < 30; count++)
status.data[count].heldp = 0;
break;
case DIVIDENDDAY : for (count = 0;count < 24; count++)
status.sizepay[count].dday = 0;
break;
case DIVIDENDCENTS : for (count = 0;count < 24; count++)
status.sizepay[count].payout = 0;
break;
} wait();
calcall();
showall();
totals(); break;
case 3: clearall();wait(); wait();
calcall();
showall();
totals();break;
/* clear all set shares per con */
} showtotals();
ready();
entercell(sys.cell);
/* inverse vol now invalid */
break;
case F08 :
leavecell(sys.cell);
switch( choice(7, utilchoice))
{
case 1 : getdir(); break;
case 2 : bonusissue();
wait();
calcall();
showall();
totals();
showtotals();
ready();
break;
case 3 : cashissue();
wait();
calcall();
showall();
totals();
showtotals();
ready();
break;
case 4: switch( choice(3,resolutionchoice))
{
case 1: numpts = 10; break;
case 2: numpts = 15; break;
case 3: numpts = 30; break;
}
break;
case 5:switch (choice(3,printchoice))
{
case 1: printdetails(); break;
case 2: demo1();break;
case 3: demo1(); break;
} break;
case 6: filedelete(); break;
case 7 : reinstall();
}
entercell(sys.cell);
break;
case F09 : switch (sys.screen)
{
case SCREEN1 :
leavecell(sys.cell);
if (sys.display == HELDS) sys.display = DELTAS;
else sys.display = HELDS;
if (sys.cell.row >= 8)
sys.cell.col = MONTH;
textcolor(sys.graphics.colors.heading);
textbackground(sys.graphics.colors.databack);
drawheadings();
showall();
showtotals();
entercell(sys.cell);break;
case SCREEN2 : break;
case SCREEN3 :
leavecell(sys.cell);
if (sys.display == INVVOL) sys.display = OVERVALUED;
else sys.display = INVVOL;
textcolor(sys.graphics.colors.heading);
textbackground(sys.graphics.colors.databack);
drawheadings();
showall();
showtotals();
entercell(sys.cell);break;
}
break;
case F10 : switch (choice(3,quitchoice))
{
case 0 : break;
case 1 : wait();
textcolor(LIGHTGRAY);
textbackground(BLACK);
savesys();
clrscr();
gotoxy(2,2);
cprintf(" The Option Analyst is a product of");
gotoxy(2,3);
cprintf(" EFAM RESOURCES Pty. Ltd.\n");
retcursor();
exit(0);
break;
case 2 : demo();
break;
case 3 : break;
}
break;
}
}
int main(int argc, char *argv[])
{
uint8_t *tab_rp_bits;
uint16_t *tab_rp_registers;
uint16_t *rd_position_registers;
uint16_t *tab_rp_registers_bad;
modbus_t *ctx;
/***********************************************************************
* feedback is used to store the return value of every called function
* rc is used to store the return value of the modbus command
* resend is used to define the resend times if the command is failed
* i is used for the loop parameter
* insert_bit is used to indicate the calibarate function if there is value to set
* num is used to store the number of data blocks in database
* use_backend is used to indicate the modbus mode is rtu
* next_option is used to take the command options
* pre_step, curr_step are used to indicate the previous step number and current position step number
* pre_length and value indicate the latest posiotion in database and current position
* SLEN is a kind of struct used to store the database blocks
************************************************************************/
int feedback,i;
int insert_bit, nb_points,num =0;
int next_option;
long curr_step;
double value;
double pdepth,pspacing,pdwell,pinterval;
double profiled,stopped;
double depth,dwell,spacing,interval;
double last_position;
int profilebit =0,feedback1,feedback2;
int modbus=0;
int motor_stop = 0;
char * command_arg = "";
char * return_value;
double in_position = 0;
SLEN *examp;
ARF *config, *profile,*off_set;
modbus_mapping_t *mb_mapping;
int ShmID;
int *ShmPTR;
int stop_indicator = 0;
key_t MyKey;
MyKey = ftok(".", 's');
ShmID = shmget(MyKey, sizeof(int), IPC_CREAT | 0666);
ShmPTR = (int *) shmat(ShmID, NULL, 0);
tab_rp_registers = (uint16_t *) malloc(4 * sizeof(uint16_t));
rd_position_registers = (uint16_t *) malloc(2 * sizeof(uint16_t));
tab_rp_registers_bad = (uint16_t *) malloc(2 * sizeof(uint16_t));
config = (ARF*)malloc( 10 * sizeof(ARF) );
if ( config == NULL )
{
printf("Error: Out of Memory, use ./master reset to reset memory\n");
exit(1);
}
const char *const short_options = "hd::u::l:p::cD::w::s::i::gSmt::";
const struct option long_options[] = {
{ "help", 0,NULL, 'h'},
{ "down", 2,NULL, 'd'},
{ "up", 2,NULL, 'u'},
{ "length", 1,NULL, 'l'},
{ "position", 2,NULL, 'p'},
{ "count", 0,NULL, 'c'},
{ "Depth", 2,NULL, 'D'},
{ "well", 2,NULL, 'w'},
{ "spacing", 2,NULL, 's'},
{ "interval", 2,NULL, 'i'},
{ "go", 0,NULL, 'g'},
{ "System", 0,NULL, 'S'},
{ "motor", 0,NULL, 'm'},
{ "time", 2,NULL, 't'},
{ NULL, 0, NULL, 0 },
};
if (argc < 2)
{
print_comusage (stderr, 1);
return_value = json_option("status:",-1);
return return_value;
}
program_name = argv[0];
/*Get the first argument that passed through main function but does not contain*/
command_name = argv[1];
if(argc > 2)
{
command_arg = argv[2];
}
/*******************************************************************************************
* The next three command_name are used to control the motor through modbus (need modbus) *
********************************************************************************************/
if ( strcmp(command_name, "go") == 0 ) {
double curr_position;
char *recd = (char*)malloc(10*sizeof(char));
double offset;
int re_send = 0;
*ShmPTR = 0;
modbus = 1;
next_option = getopt_long (argc, argv, short_options, long_options, NULL);
if (next_option == -1) print_comusage (stderr, 1);
while (next_option != -1)
{
switch (next_option)
{
case 'h':
print_comusage(stdout, 0);
case 'd':
godown:
enable(0);
initbus(1);
sleep(1);
ctx = modbusconnection(ctx);
modbus = 1;
feedback = godown(ctx);
if((feedback == -1)&&(re_send <1))
{
enable(0);
initbus(0);
re_send++;
goto godown;
}
return_value = json_option("status",feedback);
printf("%s\n",return_value);
break;
case 'u':
goup:
enable(0);
initbus(1);
sleep(1);
ctx = modbusconnection(ctx);
modbus = 1;
feedback = goup(ctx);
if((feedback == -1)&&(re_send <1))
{
enable(0);
initbus(0);
re_send++;
goto goup;
}
return_value = json_option("status",feedback);
printf("%s\n",return_value);
break;
case 'p':
enable(0);
initbus(1);
sleep(1);
ctx = modbusconnection(ctx);
modbus = 1;
in_position = atof(optarg);
off_set = (ARF*)malloc(15*sizeof(ARF));
off_set = getconfig(&num,off_set);
offset = off_set[10].value;
in_position = in_position - offset;
free(off_set);
//system("/home/sampler/kingkong.sh");
gotoposition:
if (in_position <= 0)gotoposition(ctx,0,rd_position_registers);
else
{
curr_position = checkposition(ctx,rd_position_registers);
//printf("Position is %lf\n",curr_position);
if ( !(( (in_position -0.1) <= curr_position ) && ( curr_position <= (in_position + 0.1) )) )
{
feedback = gotoposition(ctx, in_position,rd_position_registers);
return_value = json_option("status",feedback);
//printf("%s\n",return_value);
}
}
if((feedback == -1)&&(re_send <1))
{
enable(0);
initbus(0);
enable(0);
initbus(1);
sleep(1);
ctx = modbusconnection(ctx);
re_send++;
}
break;
case '?':
print_comusage (stderr, 1);
default:
abort ();
}
next_option = getopt_long (argc, argv, short_options, long_options, NULL);
}
//If the go command is failed, then exit the current process and power off the controller
if(feedback == -1)
{
*ShmPTR = 1;
enable(0);
initbus(0);
return_value = json_option("status",-1);
return return_value;
}
//wait_stop(ShmPTR,ctx,tab_rp_registers);
do {
sleep(1);
stop_indicator = *ShmPTR;
}while ((checkmotorstatus(ctx,tab_rp_registers)!= 0 ) && (stop_indicator != 1));
sleep(1);
//In order to avoid loop in checking position, get rid of using do-while
curr_position = checkposition(ctx,rd_position_registers);
if(curr_position != -1)
{
login("Go to command set last position");
curr_position = curr_position + offset;
setconfig(9,curr_position);
// In order to avoid "Read status command shutdown the power by accident"
if( *ShmPTR == 0)
{
enable(0);
initbus(0);
*ShmPTR = 1;
}
return_value = json_option("status",1);
}
else return_value = json_option("status",-1);
}
if ( strcmp(command_name, "stop") == 0 )
{
if(check_power() == 1)
{
sleep(1);
ctx = modbusconnection(ctx);
modbus = 1;
feedback = stop(ctx);
if(feedback == -1)stop(ctx);
}
}
if ( strcmp(command_name, "position") == 0 )
{
login("Check position command");
int resend = 0;
double temp_position,offset;
char *rec = (char*)malloc(10*sizeof(char));
stop_indicator = *ShmPTR;
uint16_t * position_registers = (uint16_t *) malloc(2 * sizeof(uint16_t));
off_set = (ARF*)malloc(15*sizeof(ARF));
off_set = getconfig(&num,off_set);
offset = off_set[10].value;
checkposition:
if (check_power()== 1)
{
ctx = modbusconnection(ctx);
modbus = 1;
temp_position = checkposition(ctx,position_registers);
sprintf(rec,"The position read is %f",temp_position);
login(rec);
if(temp_position != -1)
{
login("Check position set last position");
//This sentence is used to show the position with offset
temp_position = temp_position + offset;
feedback = setconfig(9,temp_position);
}
else
{
if(resend < 2)
{
resend++;
goto checkposition;
}
else return -100;
}
}
else
{
config = getconfig(&num,config);
temp_position = config[8].value;
}
return_value = json_float_option("status",temp_position);
printf("%s\n",return_value);
}
/***********************************************************************
* 0: motor is stopped *
* 1: motor is going down *
* 2: motor is going up *
* 3: motor is ramp up *
* 4: motor is ramp down *
* (need modbus) *
* *
************************************************************************/
if(strcmp(command_name, "status") == 0)
{
stop_indicator = *ShmPTR;
if (check_power()== 1)
{
sleep(1);
ctx = modbusconnection(ctx);
modbus = 1;
next_option = getopt_long (argc, argv, short_options, long_options, NULL);
if(next_option == -1) print_comusage (stderr, 1);
while(next_option != -1)
{
switch (next_option)
{
case 'h':
print_comusage(stdout, 0);
case 'S':
feedback = checksystemstatus(ctx,tab_rp_registers);
return_value = json_option("status",feedback);
break;
case 'm':
feedback = checkmotorstatus(ctx,tab_rp_registers);
return_value = json_option("status",feedback);
break;
case '?':
print_comusage (stderr, 1);
default:
abort ();
}
next_option = getopt_long (argc, argv, short_options, long_options, NULL);
}
if(feedback == -1)
{
return_value = json_option("status",0);
}
}
else
{
return_value = json_option("status",0);
//login("Check status from database");
}
printf("%s\n",return_value);
}
/****************************************************************************************
* The next three command_name are used to control the database through sqlite3 *
*****************************************************************************************/
if ( strcmp(command_name, "factory_default") == 0 )
{
feedback1 = reset(0);
feedback2 = dbinit(0);
if ( (feedback1 == 1) && (feedback2 == 1))
{
return_value = json_float_option("status",1);
printf("%s\n",return_value);
}
else
{
return_value = json_float_option("status",-1);
printf("%s\n",return_value);
}
}
if ( strcmp(command_name, "reset") == 0 )
{
feedback = reset(0);
if(feedback == 1)
{
feedback = expected_time_reset();
}
return_value = json_float_option("status",feedback);
printf("%s\n",return_value);
}
if ( strcmp(command_name, "init") == 0 )
{
feedback = -1;
if ( strcmp(command_arg, "all") == 0 )
{
feedback = dbinit(0);
if(feedback == 1)
{
feedback = expected_time_init();
}
}
if ( strcmp(command_arg, "calibrate" ) == 0 )
{
setconfig(6,0);
feedback = dbinit(1);
}
if ( strcmp(command_arg, "configure" ) == 0 )
{
feedback = dbinit(2);
}
if ( feedback == -1 )
{
return_value = json_float_option("status",-1);
print_comusage (stderr, 1);
}
else return_value = json_float_option("status",feedback);
printf("%s\n",return_value);
}
if ( strcmp(command_name,"get") == 0 )
{
examp = getall(&num,examp);
return_value = json_array_option(num,examp);
free(examp);
printf("%s",return_value);
}
if ( strcmp(command_name,"set_offset") == 0 )
{
double offset;
next_option = getopt_long (argc, argv, short_options, long_options, NULL);
if ( next_option == -1 ) print_comusage (stderr, 1);
while( next_option != -1 )
{
switch (next_option)
{
case 'h':
print_comusage(stdout, 0);
case 'l':
if(optarg!=0)offset = strtod(optarg,NULL);
insert_bit = 1;
break;
case '?':
print_comusage (stderr, 1);
default:
abort ();
}
next_option = getopt_long (argc, argv, short_options, long_options, NULL);
}
feedback = setconfig(11,offset);
return_value = json_option("status",feedback);
printf("%s",return_value);
}
if ( strcmp(command_name,"get_offset") == 0 )
{
double offset;
off_set = (ARF*)malloc(15*sizeof(ARF));
off_set = getconfig(&num,off_set);
offset = off_set[10].value;
return_value = json_float_option("status",offset);
printf("%s",return_value);
free(off_set);
}
/**************************************************************************
* The next three command_name are used to calibrate (need modbus) *
***************************************************************************/
if ( strcmp(command_name, "calibrate") == 0 )
{
double calibrate;
enable(0);
initbus(1);
sleep(1);
ctx = modbusconnection(ctx);
modbus = 1;
next_option = getopt_long (argc, argv, short_options, long_options, NULL);
if ( next_option == -1 ) print_comusage (stderr, 1);
config = getconfig(&num,config);
calibrate = config[5].value;
if ( calibrate == 0 )
{
reset(1);
setconfig(6,1.0);
set(num,0,0);
}
while( next_option != -1 )
{
switch (next_option)
{
case 'h':
print_comusage(stdout, 0);
case 'l':
if(optarg!=0)value = atof(optarg);
insert_bit = 1;
break;
case 'c':
getall(&num,examp);
return_value = json_option("status",num);
printf("%s\n",return_value);
break;
case '?':
print_comusage (stderr, 1);
default:
abort ();
}
next_option = getopt_long (argc, argv, short_options, long_options, NULL);
}
if ( insert_bit == 1 )
{
curr_step = checksteps(ctx,rd_position_registers);
if ( curr_step < 0 ) curr_step =0;//do not need
feedback = checkvalue(curr_step,value);
if ( feedback == 1 )
{
feedback = set(num,curr_step,value);
return_value = json_option("status",feedback);
}
else
{
return_value = json_option("status",-1);
}
}
/*if ( checkmotorstatus(ctx,tab_rp_registers) == 0 )
{
enable(0);
initbus(0);
}*/
printf("%s\n",return_value);
}
/***********************************************************************
* The following functions are used for profile *
* *
************************************************************************/
if ( strcmp(command_name, "profile") == 0 )
{
next_option = getopt_long (argc, argv, short_options, long_options, NULL);
if ( next_option == -1 ) print_comusage (stderr, 1);
while ( next_option != -1 )
{
switch (next_option) {
case 'h':
print_comusage(stdout, 0);
case 'd':
if(optarg!=0)depth = atof(optarg);
profilebit = 1;
break;
case 's':
if(optarg!=0)spacing = atof(optarg);
profilebit = 1;
break;
case 'w':
if(optarg!=0)dwell = atof(optarg);
profilebit = 1;
break;
case 'i':
//if(optarg!=0)interval = atof(optarg);
if(optarg!=0)interval = strtod(optarg,NULL);
profilebit = 1;
break;
case '?':
print_comusage (stderr, 1);
default:
abort ();
}
next_option = getopt_long (argc, argv, short_options, long_options, NULL);
}
if ( profilebit == 1 )
{
feedback = set_profile(depth,spacing,dwell,interval);
}
//Want to get the expected profile time and save it in database
profile_time_check(interval);
return_value = json_float_option("status",feedback);
printf("%s\n",return_value);
}
if ( strcmp(command_name, "profileget" ) == 0)
{
profile = getconfig(&num,config);
return_value = json_profile_option(num-2,profile);
free(profile);
printf("%s",return_value);
}
if ( strcmp(command_name, "profile_check" ) == 0)
{
int *expected_profile_time;
long remain_profile_time;
config = getconfig(&num,config);
pinterval = config[3].value;
if(pinterval == 0)
{
printf("-999\n");
return -999;
}
expected_profile_time = (int*)malloc(10*sizeof(int));
if(expected_profile_time == NULL){printf("error\n");exit(1);}
expected_time_get(expected_profile_time);
remain_profile_time = auto_run(0,expected_profile_time);
if(remain_profile_time <=0 )remain_profile_time = 0;
printf("%d\n",remain_profile_time);
free(expected_profile_time);
return remain_profile_time;
}
if ( strcmp(command_name, "profile_reset") == 0 )
{
//feedback = dbinit(2);
//reading_hourly();
system("ps aux | grep -e 'master profilego' | grep -v grep | awk '{print $2}' | xargs -i kill {}");
feedback = set_profile(0,0,0,0);
return_value = json_float_option("status",feedback);
printf("%s\n",return_value);
}
if ( strcmp(command_name, "profilego") == 0 )
{
double stayposition, curr_position,tmp,cal_position;
double sdl_read,offset;
long wait_time,motor_status;
int year;
time_t fail_time;
modbus_t *sdl;
int count,fini_count,re_try1 = 0,re_power1 =0,re_try = 0,re_send=0;
int i=1,sample = 0,profile_times,sample_indicator;
int * expected_tm, *curr_time,inter_val;
*ShmPTR = 0;
setconfig(10,0);
//Will get the expected time from database and compare if it is roughly
profile:
config = getconfig(&num,config);
pdepth = config[0].value;
pspacing = config[1].value;
pdwell = config[2].value;
pinterval = config[3].value;
profiled = config[4].value;
sample = config[9].value;
offset = config[10].value;
profile_times = 1+(pdepth - offset)/pspacing;
inter_val = (int)pinterval;
if(pinterval == 0) exit(1);
if(profiled == 0)
{
config = getconfig(&num,config);
pdepth = config[0].value;
pspacing = config[1].value;
pdwell = config[2].value;
pinterval = config[3].value;
profiled = config[4].value;
sample = config[9].value;
expected_tm = (int*)malloc(10*sizeof(int));
curr_time = (int*)malloc(10*sizeof(int));
if(curr_time == NULL){printf("error\n");exit(1);}
if(expected_tm == NULL){printf("error\n");exit(1);}
do{
config = getconfig(&num,config);
sample = config[9].value;
expected_time_get(expected_tm);
printf("Profile %d %d %d %d %d %d\n",expected_tm[0],expected_tm[1],expected_tm[2],expected_tm[3],expected_tm[4],expected_tm[5]);
wait_time= auto_run(0,expected_tm);
printf("Wait for %ds to profile\n",wait_time);
curr_time = check_time(curr_time);
printf("NOW %d %d %d %d %d %d\n",curr_time[0],curr_time[1],curr_time[2],curr_time[3],curr_time[4],curr_time[5]);
sample_indicator = curr_time[3]%inter_val;
//printf("%d\n",sample_indicator);
if(wait_time < -600)
{
profile_time_check(pinterval);
goto profile;
}
}while(wait_time>0);
printf("quit\n");
free(expected_tm);
printf("free\n");
four_minute_delay:
sleep(1);
curr_time = check_time(curr_time);
if((curr_time[4]>=4) &&(curr_time[4]<=10))goto start_profile;
if(curr_time[4]<4)goto four_minute_delay;
if(curr_time[4]>10)goto profile;
}
start_profile:
printf("start profile\n");
if(profiled == 0)process_profile(3,1,profile_times,0);
enable(0);
initbus(1);
sleep(1);
ctx = modbusconnection(ctx);
if(ctx == NULL)goto profile;
modbus = 1;
sleep(1);
if ( profiled == 0 )
{
printf("Start Profiling\n");
//Before go home, we do not need to check if it is home.
gotoposition(ctx, 0,rd_position_registers);
wait_for_stop(ctx, tab_rp_registers);
//Set the profile flag
setconfig(5,1);
modbus_close(sdl);
initbus(0);
sleep(pdwell);
}
printf("After go home\n");
enable(0);
printf("1\n");
initbus(1);
sleep(1);
ctx = modbusconnection(ctx);
//This following part is used to determine where is destination
curr_position = checkposition(ctx,tab_rp_registers) + offset;
cal_position = i*pspacing + offset;
if ( cal_position < pdepth )
{
stayposition = cal_position;
}
else
stayposition = pdepth;
i++;
stayposition = stayposition - offset;
gotoposition(ctx,stayposition,tab_rp_registers);
wait_for_stop(ctx, tab_rp_registers);
//Here check position in order to determine if it is destination now
curr_position = checkposition(ctx,tab_rp_registers)+offset;
printf("before ser database\n");
setconfig(9,curr_position);
printf("After set database\n");
printf("Go to sleep for dwell time\n");
initbus(0);
sleep(pdwell);
if (((pdepth -0.1) <= curr_position) && (curr_position <= (pdepth + 0.1)))
{
setconfig(5,0);
profile_time_check(pinterval);
printf("2\n");
enable(0);
printf("3\n");
initbus(1);
ctx = modbusconnection(ctx);
gotoposition(ctx, 0,rd_position_registers);
wait_for_stop(ctx, tab_rp_registers);
sleep(1);
enable(0);
printf("4\n");
initbus(0);
enable(1);
//Save the position 0, set need_sleep to 0 and set stop indicate bit ShmPTR eqaul 1
printf("5before set datababase\n");
setconfig(9,offset);
//Read the SDL data and store it in database
sleep(40);
}
goto profile;
}
/***********************************************************************
* The next three command_name are used *
* to control the date and time *
************************************************************************/
if ( strcmp(command_name, "checktime") == 0 )
{
/*char *sdate;
if ( (sdate = malloc( 80 * sizeof(char) ) )== NULL)return NULL;
sdate = current_time(sdate);
return_value = json_option_string("status",sdate);
printf("%s\n",return_value);
free(sdate);
*/
process_profile(3,1,3,1);
}
if ( strcmp(command_name, "settime") == 0 )
{
if ( argc < 4 )
{
print_comusage (stderr, 1);
}
char *date = argv[2];
char *time = argv[3];
int *buf = (int*)malloc(6*sizeof(int));
parse(buf,date,time);
int i,m_buf[6];
for(i=0;i<=5;i++)
{
m_buf[i]=*(buf+i);
}
feedback = set_time(&m_buf);
return_value = json_option("status:",feedback);
printf("%s\n",return_value);
login("Set local time");
login(return_value);
sleep(5);
}
if ( strcmp(command_name, "voltage") == 0 )
{
double voltage;
voltage = voltage_read();
return_value = json_float_option("status",voltage);
printf("%s\n",return_value);
}
if ( strcmp(command_name, "temp") == 0 )
{
double temp;
temp = temp_read();
return_value = json_float_option("status",temp);
printf("%s\n",return_value);
}
if(strcmp(command_name, "enable_power") == 0)
{
enable(0);
initbus(1);
return_value = json_option("status:",1);
}
if(strcmp(command_name, "disable_power") == 0)
{
enable(0);
initbus(0);
return_value = json_option("status:",1);
}
if ( strcmp(command_name, "backup") == 0 )
{
feedback = system("cp /home/sampler/lr.sl3 /home/sampler/lr_default.sl3");
if(feedback == -1)
{
return_value = json_float_option("status",-1);
}
else return_value = json_float_option("status",1);
printf("%s\n",return_value);
}
if ( strcmp(command_name, "restore") == 0 )
{
feedback = system("cp /home/sampler/lr_default.sl3 /home/sampler/lr.sl3");
if(feedback == -1)
{
return_value = json_float_option("status",-1);
}
else return_value = json_float_option("status",1);
printf("%s\n",return_value);
}
if ( strcmp(command_name, "debug") == 0 )
{
long return_steps;
char *debug_result;
enable(0);
initbus(1);
sleep(1);
ctx = modbusconnection(ctx);
modbus = 1;
uint16_t *debug_position_registers = (uint16_t*)malloc(2*sizeof(uint16_t));
debug_result = (char*)malloc(50*sizeof(char));
return_steps = checksteps(ctx,debug_position_registers);
sprintf(debug_result,"%x,%x,%x\n",debug_position_registers[0],debug_position_registers[1],return_steps);
json_option_string("status",debug_result);
printf("%s\n",debug_result);
initbus(0);
}
if ( strcmp(command_name, "power_check") == 0 )
{
int power_status = check_power();
printf("Power is %d\n",power_status);
}
if ( strcmp(command_name, "sdl") == 0 )
{
modbus_t * sdl;
sdl = sdl_connection(sdl);
if(sdl != NULL)
{
double vol = sdltest(sdl);
return_value = json_float_option("status",vol);
printf("%s\n",return_value);
setsdl(30000,vol);
login("Read SDL");
login(return_value);
}
else setsdl(30000,-100000);
modbus_close(sdl);
modbus_free(sdl);
}
if ( strcmp(command_name, "sdl_reset") == 0 )
{
resetsdl();
}
if ( strcmp(command_name, "sdl_get") == 0 )
{
int num_records;
SLEN * sdl_records;
sdl_records = (SLEN*)malloc(100*sizeof(SLEN));
sdl_records = getsdl(&num_records, sdl_records);
return_value = json_sdl_option(num_records,sdl_records);
printf("%s\n",return_value);
free(sdl_records);
}
if ( strcmp(command_name, "sdl_uploadtime") == 0 )
{
modbus_t * sdl;
sdl = sdl_connection(sdl);
if(sdl == NULL)
{
setsdl(30000,-100000);
}
else sdl_setuploadtime(sdl,12,5,21,12,50,0);
}
if ( strcmp(command_name, "sdl_settime") == 0 )
{
modbus_t * sdl;
sdl = sdl_connection(sdl);
if(sdl == NULL)
{
setsdl(30000,-100000);
}
else sdl_rtc_time(sdl,12,5,25,7,58,0);
}
if ( strcmp(command_name, "sdl_readsize") == 0 )
{
modbus_t * sdl;
sdl = sdl_connection(sdl);
if(sdl == NULL)
{
setsdl(30000,-100000);
}
else sdl_readbuffsize(sdl);
}
if ( strcmp(command_name, "sdl_readsensor") == 0 )
{
modbus_t * sdl;
sdl = sdl_connection(sdl);
if(sdl == NULL)
{
setsdl(30000,-100000);
}
else sdl_read_sensor(sdl,1,1);
}
if ( strcmp(command_name, "sdl_upload") == 0 )
{
//sdl_read_log_data(16);
int number;
modbus_t * sdl;
sdl = sdl_connection(sdl);
if(sdl == NULL)
{
setsdl(30000,-100000);
}
else
{
profile_save_data(sdl);
}
modbus_close(sdl);
}
if ( strcmp(command_name, "sdl_sample") == 0 )
{
int number;
modbus_t * sdl;
sdl = sdl_connection(sdl);
if(sdl == NULL)
{
setsdl(30000,-100000);
}
else
{
sdl_read_sensor(sdl,1,1);
sleep(60);
sample_save_data(sdl);
//sdl_start_profile(sdl,2);
}
modbus_close(sdl);
}
if ( strcmp(command_name, "shutdown") == 0 )
{
feedback = system("/sbin/shutdown now");
}
if ( strcmp(command_name, "maxstep") == 0 )
{
enable(0);
initbus(1);
sleep(1);
ctx = modbusconnection(ctx);
modbus = 1;
feedback = set_max_step(ctx,rd_position_registers);
return_value = json_option("status",feedback);
initbus(0);
}
if(strcmp(command_name, "slave") == 0)
{
slave();
}
if(strcmp(command_name, "motor_status") == 0)
{
if (check_power()== 1)
{
sleep(1);
ctx = modbusconnection(ctx);
modbus = 1;
feedback = checkmotorstatus(ctx,tab_rp_registers);
if(feedback == -1)
{
printf("0\n");
return 0;
}
else
{
printf("%d\n",feedback);
return feedback;
}
}
else
{
printf("0\n");
return 0;
}
}
close:
/* Free the memory */
//free(tab_rp_bits);
free(config);
free(tab_rp_registers);
free(rd_position_registers);
//modbus_mapping_free(mb_mapping);
/* Close the connection */
if (modbus == 1)
{
modbus_close(ctx);
}
if (motor_stop == 1)
{
printf("stop setting\n");
setconfig(9,last_position);
}
return return_value;
}
int
main(int argc, char **argv)
{
FILE *fp;
FILE *in;
if(argc == 2){
fp = fopen(argv[1], "r");
in = stdin;
} else {
fp = stdin;
in = fopen("/dev/tty", "r");
}
if(!fp || !in)
err(1, "Cannot open files");
signal(SIGINT, finish);
(void) initscr();
(void) keypad(stdscr, TRUE);
(void) nonl();
(void) cbreak();
(void) noecho();
(void) read_file(fp);
v_end = LINES;
(void) repaint();
lastreg = malloc(80 * sizeof(char*));
if(!lastreg)
err(1, "can't lastreg");
for(;;){
int c = getch();
switch(c){
case 'j':
godown();
break;
case 'k':
goup();
break;
case '<':
gostart();
break;
case '>':
goend();
break;
case 'q':
finish(0);
break;
case KEY_NPAGE:
case ' ':
downpage();
break;
case KEY_PPAGE:
case KEY_BACKSPACE:
uppage();
break;
case '/':
dosearch();
break;
case '?':
dobacksearch();
break;
case 12: /* ^L */
repaint();
break;
}
}
}
