int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic)
{
struct resource *res;
int i;
gsc_asic->gsc = parent;
/* Initialise local irq -> global irq mapping */
for (i = 0; i < 32; i++) {
gsc_asic->global_irq[i] = NO_IRQ;
}
/* allocate resource region */
res = request_mem_region(gsc_asic->hpa, 0x100000, gsc_asic->name);
if (res) {
res->flags = IORESOURCE_MEM; /* do not mark it busy ! */
}
#if 0
printk(KERN_WARNING "%s IRQ %d EIM 0x%x", gsc_asic->name,
parent->irq, gsc_asic->eim);
if (gsc_readl(gsc_asic->hpa + OFFSET_IMR))
printk(" IMR is non-zero! (0x%x)",
gsc_readl(gsc_asic->hpa + OFFSET_IMR));
printk("\n");
#endif
return 0;
}
static int __init lasi_init_chip(struct parisc_device *dev)
{
extern void (*chassis_power_off)(void);
struct gsc_asic *lasi;
struct gsc_irq gsc_irq;
int ret;
lasi = kzalloc(sizeof(*lasi), GFP_KERNEL);
if (!lasi)
return -ENOMEM;
lasi->name = "Lasi";
lasi->hpa = dev->hpa.start;
lasi->version = gsc_readl(lasi->hpa + LASI_VER) & 0xf;
printk(KERN_INFO "%s version %d at 0x%lx found.\n",
lasi->name, lasi->version, lasi->hpa);
lasi_led_init(lasi->hpa);
lasi_init_irq(lasi);
dev->irq = gsc_alloc_irq(&gsc_irq);
if (dev->irq < 0) {
printk(KERN_ERR "%s(): cannot get GSC irq\n",
__func__);
kfree(lasi);
return -EBUSY;
}
lasi->eim = ((u32) gsc_irq.txn_addr) | gsc_irq.txn_data;
ret = request_irq(gsc_irq.irq, gsc_asic_intr, 0, "lasi", lasi);
if (ret < 0) {
kfree(lasi);
return ret;
}
gsc_writel(lasi->eim, lasi->hpa + OFFSET_IAR);
ret = gsc_common_setup(dev, lasi);
if (ret) {
kfree(lasi);
return ret;
}
gsc_fixup_irqs(dev, lasi, lasi_choose_irq);
lasi_power_off_hpa = lasi->hpa;
chassis_power_off = lasi_power_off;
return ret;
}
static void __init
lasi_init_irq(struct gsc_asic *this_lasi)
{
unsigned long lasi_base = this_lasi->hpa;
/* Stop LASI barking for a bit */
gsc_writel(0x00000000, lasi_base+OFFSET_IMR);
/* clear pending interrupts */
gsc_readl(lasi_base+OFFSET_IRR);
/* We're not really convinced we want to reset the onboard
* devices. Firmware does it for us...
*/
/* Resets */
/* gsc_writel(0xFFFFFFFF, lasi_base+0x2000);*/ /* Parallel */
if(pdc_add_valid(lasi_base+0x4004) == PDC_OK)
gsc_writel(0xFFFFFFFF, lasi_base+0x4004); /* Audio */
/* gsc_writel(0xFFFFFFFF, lasi_base+0x5000);*/ /* Serial */
/* gsc_writel(0xFFFFFFFF, lasi_base+0x6000);*/ /* SCSI */
gsc_writel(0xFFFFFFFF, lasi_base+0x7000); /* LAN */
gsc_writel(0xFFFFFFFF, lasi_base+0x8000); /* Keyboard */
gsc_writel(0xFFFFFFFF, lasi_base+0xA000); /* FDC */
/* Ok we hit it on the head with a hammer, our Dog is now
** comatose and muzzled. Devices will now unmask LASI
** interrupts as they are registered as irq's in the LASI range.
*/
/* XXX: I thought it was `awks that got `it on the `ead with an
* `ammer. -- willy
*/
}
static int __init lasi_init_chip(struct parisc_device *dev)
{
extern void (*chassis_power_off)(void);
struct gsc_asic *lasi;
struct gsc_irq gsc_irq;
int ret;
lasi = kzalloc(sizeof(*lasi), GFP_KERNEL);
if (!lasi)
return -ENOMEM;
lasi->name = "Lasi";
lasi->hpa = dev->hpa.start;
/* Check the 4-bit (yes, only 4) version register */
lasi->version = gsc_readl(lasi->hpa + LASI_VER) & 0xf;
printk(KERN_INFO "%s version %d at 0x%lx found.\n",
lasi->name, lasi->version, lasi->hpa);
/* initialize the chassis LEDs really early */
lasi_led_init(lasi->hpa);
/* Stop LASI barking for a bit */
lasi_init_irq(lasi);
/* the IRQ lasi should use */
dev->irq = gsc_alloc_irq(&gsc_irq);
if (dev->irq < 0) {
printk(KERN_ERR "%s(): cannot get GSC irq\n",
__func__);
kfree(lasi);
return -EBUSY;
}
lasi->eim = ((u32) gsc_irq.txn_addr) | gsc_irq.txn_data;
ret = request_irq(gsc_irq.irq, gsc_asic_intr, 0, "lasi", lasi);
if (ret < 0) {
kfree(lasi);
return ret;
}
/* enable IRQ's for devices below LASI */
gsc_writel(lasi->eim, lasi->hpa + OFFSET_IAR);
/* Done init'ing, register this driver */
ret = gsc_common_setup(dev, lasi);
if (ret) {
kfree(lasi);
return ret;
}
gsc_fixup_irqs(dev, lasi, lasi_choose_irq);
/* initialize the power off function */
lasi_power_off_hpa = lasi->hpa;
chassis_power_off = lasi_power_off;
return ret;
}
static void gsc_asic_mask_irq(unsigned int irq)
{
struct gsc_asic *irq_dev = get_irq_chip_data(irq);
int local_irq = gsc_find_local_irq(irq, irq_dev->global_irq, 32);
u32 imr;
DEBPRINTK(KERN_DEBUG "%s(%d) %s: IMR 0x%x\n", __func__, irq,
irq_dev->name, imr);
/* Disable the IRQ line by clearing the bit in the IMR */
imr = gsc_readl(irq_dev->hpa + OFFSET_IMR);
imr &= ~(1 << local_irq);
gsc_writel(imr, irq_dev->hpa + OFFSET_IMR);
}
static void gsc_asic_enable_irq(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
struct gsc_asic *irq_dev = desc->chip_data;
int local_irq = gsc_find_local_irq(irq, irq_dev->global_irq, 32);
u32 imr;
DEBPRINTK(KERN_DEBUG "%s(%d) %s: IMR 0x%x\n", __func__, irq,
irq_dev->name, imr);
/* Enable the IRQ line by setting the bit in the IMR */
imr = gsc_readl(irq_dev->hpa + OFFSET_IMR);
imr |= 1 << local_irq;
gsc_writel(imr, irq_dev->hpa + OFFSET_IMR);
}
static void polling_tasklet_func(unsigned long soft_power_reg)
{
unsigned long current_status;
if (!pwrsw_enabled)
return;
current_status = gsc_readl(soft_power_reg);
if (current_status & 0x1) {
/* power switch button not pressed */
shutdown_timer = 0;
} else {
process_shutdown();
}
}
/* main kernel thread worker. It polls the button state */
static int kpowerswd(void *param)
{
__set_current_state(TASK_RUNNING);
do {
int button_not_pressed;
unsigned long soft_power_reg = (unsigned long) param;
schedule_timeout_interruptible(pwrsw_enabled ? HZ : HZ/POWERSWITCH_POLL_PER_SEC);
__set_current_state(TASK_RUNNING);
if (unlikely(!pwrsw_enabled))
continue;
if (soft_power_reg) {
/*
* Non-Gecko-style machines:
* Check the power switch status which is read from the
* real I/O location at soft_power_reg.
* Bit 31 ("the lowest bit) is the status of the power switch.
* This bit is "1" if the button is NOT pressed.
*/
button_not_pressed = (gsc_readl(soft_power_reg) & 0x1);
} else {
/*
* On gecko style machines (e.g. 712/xx and 715/xx)
* the power switch status is stored in Bit 0 ("the highest bit")
* of CPU diagnose register 25.
* Warning: Some machines never reset the DIAG flag, even if
* the button has been released again.
*/
button_not_pressed = (__getDIAG(25) & 0x80000000);
}
if (likely(button_not_pressed)) {
if (unlikely(shutdown_timer && /* avoid writing if not necessary */
shutdown_timer < (POWERSWITCH_DOWN_SEC*POWERSWITCH_POLL_PER_SEC))) {
shutdown_timer = 0;
printk(KERN_INFO KTHREAD_NAME ": Shutdown request aborted.\n");
}
} else
process_shutdown();
} while (!kthread_should_stop());
return 0;
}
static int kpowerswd(void *param)
{
__set_current_state(TASK_RUNNING);
do {
int button_not_pressed;
unsigned long soft_power_reg = (unsigned long) param;
schedule_timeout_interruptible(pwrsw_enabled ? HZ : HZ/POWERSWITCH_POLL_PER_SEC);
__set_current_state(TASK_RUNNING);
if (unlikely(!pwrsw_enabled))
continue;
if (soft_power_reg) {
/*
*/
button_not_pressed = (gsc_readl(soft_power_reg) & 0x1);
} else {
/*
*/
button_not_pressed = (__getDIAG(25) & 0x80000000);
}
if (likely(button_not_pressed)) {
if (unlikely(shutdown_timer && /* */
shutdown_timer < (POWERSWITCH_DOWN_SEC*POWERSWITCH_POLL_PER_SEC))) {
shutdown_timer = 0;
printk(KERN_INFO KTHREAD_NAME ": Shutdown request aborted.\n");
}
} else
process_shutdown();
} while (!kthread_should_stop());
return 0;
}
static void gsc_asic_unmask_irq(unsigned int irq)
{
struct gsc_asic *irq_dev = get_irq_chip_data(irq);
int local_irq = gsc_find_local_irq(irq, irq_dev->global_irq, 32);
u32 imr;
DEBPRINTK(KERN_DEBUG "%s(%d) %s: IMR 0x%x\n", __func__, irq,
irq_dev->name, imr);
/* Enable the IRQ line by setting the bit in the IMR */
imr = gsc_readl(irq_dev->hpa + OFFSET_IMR);
imr |= 1 << local_irq;
gsc_writel(imr, irq_dev->hpa + OFFSET_IMR);
/*
* FIXME: read IPR to make sure the IRQ isn't already pending.
* If so, we need to read IRR and manually call do_irq().
*/
}
static void __init
wax_init_irq(struct gsc_asic *wax)
{
unsigned long base = wax->hpa;
/* Wax-off */
gsc_writel(0x00000000, base+OFFSET_IMR);
/* clear pending interrupts */
gsc_readl(base+OFFSET_IRR);
/* We're not really convinced we want to reset the onboard
* devices. Firmware does it for us...
*/
/* Resets */
// gsc_writel(0xFFFFFFFF, base+0x1000); /* HIL */
// gsc_writel(0xFFFFFFFF, base+0x2000); /* RS232-B on Wax */
}
static void __init
wax_init_irq(struct gsc_asic *wax)
{
unsigned long base = wax->hpa;
/* */
gsc_writel(0x00000000, base+OFFSET_IMR);
/* */
gsc_readl(base+OFFSET_IRR);
/*
*/
/* */
//
//
}
/* Common interrupt demultiplexer used by Asp, Lasi & Wax. */
irqreturn_t gsc_asic_intr(int gsc_asic_irq, void *dev)
{
unsigned long irr;
struct gsc_asic *gsc_asic = dev;
irr = gsc_readl(gsc_asic->hpa + OFFSET_IRR);
if (irr == 0)
return IRQ_NONE;
DEBPRINTK("%s intr, mask=0x%x\n", gsc_asic->name, irr);
do {
int local_irq = __ffs(irr);
unsigned int irq = gsc_asic->global_irq[local_irq];
__do_IRQ(irq);
irr &= ~(1 << local_irq);
} while (irr);
return IRQ_HANDLED;
}
static void pa7300lc_lpmc(int code, struct pt_regs *regs)
{
u32 hpa;
printk(KERN_WARNING "LPMC on CPU %d\n", smp_processor_id());
show_regs(regs);
hpa = cpu_hpa();
printk(KERN_WARNING
"MIOC_CONTROL %08x\n" "MIOC_STATUS %08x\n"
"MDERRADD %08x\n" "DMAERR %08x\n"
"DIOERR %08x\n" "HIDMAMEM %08x\n",
gsc_readl(hpa+MIOC_CONTROL), gsc_readl(hpa+MIOC_STATUS),
gsc_readl(hpa+MDERRADD), gsc_readl(hpa+DMAERR),
gsc_readl(hpa+DIOERR), gsc_readl(hpa+HIDMAMEM));
}
static void __init
lasi_init_irq(struct gsc_asic *this_lasi)
{
unsigned long lasi_base = this_lasi->hpa;
gsc_writel(0x00000000, lasi_base+OFFSET_IMR);
gsc_readl(lasi_base+OFFSET_IRR);
if(pdc_add_valid(lasi_base+0x4004) == PDC_OK)
gsc_writel(0xFFFFFFFF, lasi_base+0x4004);
gsc_writel(0xFFFFFFFF, lasi_base+0x7000);
gsc_writel(0xFFFFFFFF, lasi_base+0x8000);
gsc_writel(0xFFFFFFFF, lasi_base+0xA000);
}
void
sti_putc(struct sti_struct *sti, int c, int y, int x)
{
struct sti_font_inptr inptr = {
.font_start_addr= STI_PTR(sti->font->raw),
.index = c_index(sti, c),
.fg_color = c_fg(sti, c),
.bg_color = c_bg(sti, c),
.dest_x = x * sti->font_width,
.dest_y = y * sti->font_height,
};
struct sti_font_outptr outptr = { 0, };
s32 ret;
unsigned long flags;
do {
spin_lock_irqsave(&sti->lock, flags);
ret = STI_CALL(sti->font_unpmv, &default_font_flags,
&inptr, &outptr, sti->glob_cfg);
spin_unlock_irqrestore(&sti->lock, flags);
} while (ret == 1);
}
static const struct sti_blkmv_flags clear_blkmv_flags = {
.wait = STI_WAIT,
.color = 1,
.clear = 1,
};
void
sti_set(struct sti_struct *sti, int src_y, int src_x,
int height, int width, u8 color)
{
struct sti_blkmv_inptr inptr = {
.fg_color = color,
.bg_color = color,
.src_x = src_x,
.src_y = src_y,
.dest_x = src_x,
.dest_y = src_y,
.width = width,
.height = height,
};
struct sti_blkmv_outptr outptr = { 0, };
s32 ret;
unsigned long flags;
do {
spin_lock_irqsave(&sti->lock, flags);
ret = STI_CALL(sti->block_move, &clear_blkmv_flags,
&inptr, &outptr, sti->glob_cfg);
spin_unlock_irqrestore(&sti->lock, flags);
} while (ret == 1);
}
void
sti_clear(struct sti_struct *sti, int src_y, int src_x,
int height, int width, int c)
{
struct sti_blkmv_inptr inptr = {
.fg_color = c_fg(sti, c),
.bg_color = c_bg(sti, c),
.src_x = src_x * sti->font_width,
.src_y = src_y * sti->font_height,
.dest_x = src_x * sti->font_width,
.dest_y = src_y * sti->font_height,
.width = width * sti->font_width,
.height = height* sti->font_height,
};
struct sti_blkmv_outptr outptr = { 0, };
s32 ret;
unsigned long flags;
do {
spin_lock_irqsave(&sti->lock, flags);
ret = STI_CALL(sti->block_move, &clear_blkmv_flags,
&inptr, &outptr, sti->glob_cfg);
spin_unlock_irqrestore(&sti->lock, flags);
} while (ret == 1);
}
static const struct sti_blkmv_flags default_blkmv_flags = {
.wait = STI_WAIT,
};
void
sti_bmove(struct sti_struct *sti, int src_y, int src_x,
int dst_y, int dst_x, int height, int width)
{
struct sti_blkmv_inptr inptr = {
.src_x = src_x * sti->font_width,
.src_y = src_y * sti->font_height,
.dest_x = dst_x * sti->font_width,
.dest_y = dst_y * sti->font_height,
.width = width * sti->font_width,
.height = height* sti->font_height,
};
struct sti_blkmv_outptr outptr = { 0, };
s32 ret;
unsigned long flags;
do {
spin_lock_irqsave(&sti->lock, flags);
ret = STI_CALL(sti->block_move, &default_blkmv_flags,
&inptr, &outptr, sti->glob_cfg);
spin_unlock_irqrestore(&sti->lock, flags);
} while (ret == 1);
}
static void sti_flush(unsigned long start, unsigned long end)
{
flush_icache_range(start, end);
}
static void __devinit sti_rom_copy(unsigned long base, unsigned long count,
void *dest)
{
unsigned long dest_start = (unsigned long) dest;
/* this still needs to be revisited (see arch/parisc/mm/init.c:246) ! */
while (count >= 4) {
count -= 4;
*(u32 *)dest = gsc_readl(base);
base += 4;
dest += 4;
}
while (count) {
count--;
*(u8 *)dest = gsc_readb(base);
base++;
dest++;
}
sti_flush(dest_start, (unsigned long)dest);
}
static char default_sti_path[21] __read_mostly;
#ifndef MODULE
static int __devinit sti_setup(char *str)
{
if (str)
strlcpy (default_sti_path, str, sizeof (default_sti_path));
return 1;
}
__setup("sti=", sti_setup);
#endif
static char __devinitdata *font_name[MAX_STI_ROMS] = { "VGA8x16", };
static int __devinitdata font_index[MAX_STI_ROMS],
font_height[MAX_STI_ROMS],
font_width[MAX_STI_ROMS];
#ifndef MODULE
static int __devinit sti_font_setup(char *str)
{
char *x;
int i = 0;
/* we accept sti_font=VGA8x16, sti_font=10x20, sti_font=10*20
* or sti_font=7 style command lines. */
while (i<MAX_STI_ROMS && str && *str) {
if (*str>='0' && *str<='9') {
if ((x = strchr(str, 'x')) || (x = strchr(str, '*'))) {
font_height[i] = simple_strtoul(str, NULL, 0);
font_width[i] = simple_strtoul(x+1, NULL, 0);
} else {
font_index[i] = simple_strtoul(str, NULL, 0);
}
} else {
font_name[i] = str; /* fb font name */
}
if ((x = strchr(str, ',')))
*x++ = 0;
str = x;
i++;
}
return 1;
}
__setup("sti_font=", sti_font_setup);
#endif
static void __devinit
sti_dump_globcfg(struct sti_glob_cfg *glob_cfg, unsigned int sti_mem_request)
{
struct sti_glob_cfg_ext *cfg;
DPRINTK((KERN_INFO
"%d text planes\n"
"%4d x %4d screen resolution\n"
"%4d x %4d offscreen\n"
"%4d x %4d layout\n"
"regions at %08x %08x %08x %08x\n"
"regions at %08x %08x %08x %08x\n"
"reent_lvl %d\n"
"save_addr %08x\n",
glob_cfg->text_planes,
glob_cfg->onscreen_x, glob_cfg->onscreen_y,
glob_cfg->offscreen_x, glob_cfg->offscreen_y,
glob_cfg->total_x, glob_cfg->total_y,
glob_cfg->region_ptrs[0], glob_cfg->region_ptrs[1],
glob_cfg->region_ptrs[2], glob_cfg->region_ptrs[3],
glob_cfg->region_ptrs[4], glob_cfg->region_ptrs[5],
glob_cfg->region_ptrs[6], glob_cfg->region_ptrs[7],
glob_cfg->reent_lvl,
glob_cfg->save_addr));
/* dump extended cfg */
cfg = PTR_STI((unsigned long)glob_cfg->ext_ptr);
DPRINTK(( KERN_INFO
"monitor %d\n"
"in friendly mode: %d\n"
"power consumption %d watts\n"
"freq ref %d\n"
"sti_mem_addr %08x (size=%d bytes)\n",
cfg->curr_mon,
cfg->friendly_boot,
cfg->power,
cfg->freq_ref,
cfg->sti_mem_addr, sti_mem_request));
}
static void __devinit
sti_dump_outptr(struct sti_struct *sti)
{
DPRINTK((KERN_INFO
"%d bits per pixel\n"
"%d used bits\n"
"%d planes\n"
"attributes %08x\n",
sti->outptr.bits_per_pixel,
sti->outptr.bits_used,
sti->outptr.planes,
sti->outptr.attributes));
}
int __init
lasi_init_chip(struct parisc_device *dev)
{
struct busdevice *lasi;
struct gsc_irq gsc_irq;
int irq, ret;
lasi = kmalloc(sizeof(struct busdevice), GFP_KERNEL);
if (!lasi)
return -ENOMEM;
lasi->name = "Lasi";
lasi->hpa = dev->hpa;
/* Check the 4-bit (yes, only 4) version register */
lasi->version = gsc_readl(lasi->hpa + LASI_VER) & 0xf;
printk(KERN_INFO "%s version %d at 0x%lx found.\n",
lasi->name, lasi->version, lasi->hpa);
/* initialize the chassis LEDs really early */
lasi_led_init(lasi->hpa);
/* Stop LASI barking for a bit */
lasi_init_irq(lasi);
/* the IRQ lasi should use */
irq = gsc_alloc_irq(&gsc_irq);
if (irq < 0) {
printk(KERN_ERR "%s(): cannot get GSC irq\n",
__FUNCTION__);
kfree(lasi);
return -EBUSY;
}
ret = request_irq(gsc_irq.irq, busdev_barked, 0, "lasi", lasi);
if (ret < 0) {
kfree(lasi);
return ret;
}
/* Save this for debugging later */
lasi->parent_irq = gsc_irq.irq;
lasi->eim = ((u32) gsc_irq.txn_addr) | gsc_irq.txn_data;
/* enable IRQ's for devices below LASI */
gsc_writel(lasi->eim, lasi->hpa + OFFSET_IAR);
/* Done init'ing, register this driver */
ret = gsc_common_irqsetup(dev, lasi);
if (ret) {
kfree(lasi);
return ret;
}
fixup_child_irqs(dev, lasi->busdev_region->data.irqbase,
lasi_choose_irq);
/* initialize the power off function */
/* FIXME: Record the LASI HPA for the power off function. This should
* ensure that only the first LASI (the one controlling the power off)
* should set the HPA here */
lasi_power_off_hpa = lasi->hpa;
pm_power_off = lasi_power_off;
return ret;
}
void
sti_putc(struct sti_struct *sti, int c, int y, int x)
{
struct sti_font_inptr inptr = {
.font_start_addr= STI_PTR(sti->font->raw),
.index = c_index(sti, c),
.fg_color = c_fg(sti, c),
.bg_color = c_bg(sti, c),
.dest_x = x * sti->font_width,
.dest_y = y * sti->font_height,
};
struct sti_font_outptr outptr = { 0, };
s32 ret;
unsigned long flags;
do {
spin_lock_irqsave(&sti->lock, flags);
ret = STI_CALL(sti->font_unpmv, &default_font_flags,
&inptr, &outptr, sti->glob_cfg);
spin_unlock_irqrestore(&sti->lock, flags);
} while (ret == 1);
}
static const struct sti_blkmv_flags clear_blkmv_flags = {
.wait = STI_WAIT,
.color = 1,
.clear = 1,
};
void
sti_set(struct sti_struct *sti, int src_y, int src_x,
int height, int width, u8 color)
{
struct sti_blkmv_inptr inptr = {
.fg_color = color,
.bg_color = color,
.src_x = src_x,
.src_y = src_y,
.dest_x = src_x,
.dest_y = src_y,
.width = width,
.height = height,
};
struct sti_blkmv_outptr outptr = { 0, };
s32 ret;
unsigned long flags;
do {
spin_lock_irqsave(&sti->lock, flags);
ret = STI_CALL(sti->block_move, &clear_blkmv_flags,
&inptr, &outptr, sti->glob_cfg);
spin_unlock_irqrestore(&sti->lock, flags);
} while (ret == 1);
}
void
sti_clear(struct sti_struct *sti, int src_y, int src_x,
int height, int width, int c)
{
struct sti_blkmv_inptr inptr = {
.fg_color = c_fg(sti, c),
.bg_color = c_bg(sti, c),
.src_x = src_x * sti->font_width,
.src_y = src_y * sti->font_height,
.dest_x = src_x * sti->font_width,
.dest_y = src_y * sti->font_height,
.width = width * sti->font_width,
.height = height* sti->font_height,
};
struct sti_blkmv_outptr outptr = { 0, };
s32 ret;
unsigned long flags;
do {
spin_lock_irqsave(&sti->lock, flags);
ret = STI_CALL(sti->block_move, &clear_blkmv_flags,
&inptr, &outptr, sti->glob_cfg);
spin_unlock_irqrestore(&sti->lock, flags);
} while (ret == 1);
}
static const struct sti_blkmv_flags default_blkmv_flags = {
.wait = STI_WAIT,
};
void
sti_bmove(struct sti_struct *sti, int src_y, int src_x,
int dst_y, int dst_x, int height, int width)
{
struct sti_blkmv_inptr inptr = {
.src_x = src_x * sti->font_width,
.src_y = src_y * sti->font_height,
.dest_x = dst_x * sti->font_width,
.dest_y = dst_y * sti->font_height,
.width = width * sti->font_width,
.height = height* sti->font_height,
};
struct sti_blkmv_outptr outptr = { 0, };
s32 ret;
unsigned long flags;
do {
spin_lock_irqsave(&sti->lock, flags);
ret = STI_CALL(sti->block_move, &default_blkmv_flags,
&inptr, &outptr, sti->glob_cfg);
spin_unlock_irqrestore(&sti->lock, flags);
} while (ret == 1);
}
/* FIXME: Do we have another solution for this ? */
static void sti_flush(unsigned long from, unsigned long len)
{
flush_data_cache();
flush_kernel_dcache_range(from, len);
flush_icache_range(from, from+len);
}
void __init
sti_rom_copy(unsigned long base, unsigned long count, void *dest)
{
unsigned long dest_len = count;
unsigned long dest_start = (unsigned long) dest;
/* this still needs to be revisited (see arch/parisc/mm/init.c:246) ! */
while (count >= 4) {
count -= 4;
*(u32 *)dest = gsc_readl(base);
base += 4;
dest += 4;
}
while (count) {
count--;
*(u8 *)dest = gsc_readb(base);
base++;
dest++;
}
sti_flush(dest_start, dest_len);
}
static char default_sti_path[21] __read_mostly;
#ifndef MODULE
static int __init sti_setup(char *str)
{
if (str)
strlcpy (default_sti_path, str, sizeof (default_sti_path));
return 1;
}
/* Assuming the machine has multiple STI consoles (=graphic cards) which
* all get detected by sticon, the user may define with the linux kernel
* parameter sti=<x> which of them will be the initial boot-console.
* <x> is a number between 0 and MAX_STI_ROMS, with 0 as the default
* STI screen.
*/
__setup("sti=", sti_setup);
#endif
static char __initdata *font_name[MAX_STI_ROMS] = { "VGA8x16", };
static int __initdata font_index[MAX_STI_ROMS],
font_height[MAX_STI_ROMS],
font_width[MAX_STI_ROMS];
#ifndef MODULE
static int __init sti_font_setup(char *str)
{
char *x;
int i = 0;
/* we accept sti_font=VGA8x16, sti_font=10x20, sti_font=10*20
* or sti_font=7 style command lines. */
while (i<MAX_STI_ROMS && str && *str) {
if (*str>='0' && *str<='9') {
if ((x = strchr(str, 'x')) || (x = strchr(str, '*'))) {
font_height[i] = simple_strtoul(str, NULL, 0);
font_width[i] = simple_strtoul(x+1, NULL, 0);
} else {
font_index[i] = simple_strtoul(str, NULL, 0);
}
} else {
font_name[i] = str; /* fb font name */
}
if ((x = strchr(str, ',')))
*x++ = 0;
str = x;
i++;
}
return 1;
}
/* The optional linux kernel parameter "sti_font" defines which font
* should be used by the sticon driver to draw characters to the screen.
* Possible values are:
* - sti_font=<fb_fontname>:
* <fb_fontname> is the name of one of the linux-kernel built-in
* framebuffer font names (e.g. VGA8x16, SUN22x18).
* This is only available if the fonts have been statically compiled
* in with e.g. the CONFIG_FONT_8x16 or CONFIG_FONT_SUN12x22 options.
* - sti_font=<number>
* most STI ROMs have built-in HP specific fonts, which can be selected
* by giving the desired number to the sticon driver.
* NOTE: This number is machine and STI ROM dependend.
* - sti_font=<height>x<width> (e.g. sti_font=16x8)
* <height> and <width> gives hints to the height and width of the
* font which the user wants. The sticon driver will try to use
* a font with this height and width, but if no suitable font is
* found, sticon will use the default 8x8 font.
*/
__setup("sti_font=", sti_font_setup);
#endif
static void __init
sti_dump_globcfg(struct sti_glob_cfg *glob_cfg, unsigned int sti_mem_request)
{
struct sti_glob_cfg_ext *cfg;
DPRINTK((KERN_INFO
"%d text planes\n"
"%4d x %4d screen resolution\n"
"%4d x %4d offscreen\n"
"%4d x %4d layout\n"
"regions at %08x %08x %08x %08x\n"
"regions at %08x %08x %08x %08x\n"
"reent_lvl %d\n"
"save_addr %08x\n",
glob_cfg->text_planes,
glob_cfg->onscreen_x, glob_cfg->onscreen_y,
glob_cfg->offscreen_x, glob_cfg->offscreen_y,
glob_cfg->total_x, glob_cfg->total_y,
glob_cfg->region_ptrs[0], glob_cfg->region_ptrs[1],
glob_cfg->region_ptrs[2], glob_cfg->region_ptrs[3],
glob_cfg->region_ptrs[4], glob_cfg->region_ptrs[5],
glob_cfg->region_ptrs[6], glob_cfg->region_ptrs[7],
glob_cfg->reent_lvl,
glob_cfg->save_addr));
/* dump extended cfg */
cfg = PTR_STI((unsigned long)glob_cfg->ext_ptr);
DPRINTK(( KERN_INFO
"monitor %d\n"
"in friendly mode: %d\n"
"power consumption %d watts\n"
"freq ref %d\n"
"sti_mem_addr %08x (size=%d bytes)\n",
cfg->curr_mon,
cfg->friendly_boot,
cfg->power,
cfg->freq_ref,
cfg->sti_mem_addr, sti_mem_request));
}
static void __init
sti_dump_outptr(struct sti_struct *sti)
{
DPRINTK((KERN_INFO
"%d bits per pixel\n"
"%d used bits\n"
"%d planes\n"
"attributes %08x\n",
sti->outptr.bits_per_pixel,
sti->outptr.bits_used,
sti->outptr.planes,
sti->outptr.attributes));
}
