Exemple #1
0
static int h2_protocol_switch(conn_rec *c, request_rec *r, server_rec *s,
                              const char *protocol)
{
    int found = 0;
    const char **protos = h2_h2_is_tls(c)? h2_tls_protos : h2_clear_protos;
    const char **p = protos;
    
    (void)s;
    while (*p) {
        if (!strcmp(*p, protocol)) {
            found = 1;
            break;
        }
        p++;
    }
    
    if (found) {
        h2_ctx *ctx = h2_ctx_get(c, 1);
        
        ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, c,
                      "switching protocol to '%s'", protocol);
        h2_ctx_protocol_set(ctx, protocol);
        h2_ctx_server_set(ctx, s);
        
        if (r != NULL) {
            apr_status_t status;
            /* Switching in the middle of a request means that
             * we have to send out the response to this one in h2
             * format. So we need to take over the connection
             * right away.
             */
            ap_remove_input_filter_byhandle(r->input_filters, "http_in");
            ap_remove_input_filter_byhandle(r->input_filters, "reqtimeout");
            ap_remove_output_filter_byhandle(r->output_filters, "HTTP_HEADER");
            
            /* Ok, start an h2_conn on this one. */
            h2_ctx_server_set(ctx, r->server);
            status = h2_conn_setup(ctx, r->connection, r);
            if (status != APR_SUCCESS) {
                ap_log_rerror(APLOG_MARK, APLOG_DEBUG, status, r, APLOGNO(03088)
                              "session setup");
                return status;
            }
            
            h2_conn_run(ctx, c);
            return DONE;
        }
        return DONE;
    }
    
    return DECLINED;
}
Exemple #2
0
static int h2_protocol_switch(conn_rec *c, request_rec *r, server_rec *s,
                              const char *protocol)
{
    int found = 0;
    const char **protos = h2_h2_is_tls(c)? h2_tls_protos : h2_clear_protos;
    const char **p = protos;

    (void)s;
    while (*p) {
        if (!strcmp(*p, protocol)) {
            found = 1;
            break;
        }
        p++;
    }

    if (found) {
        h2_ctx *ctx = h2_ctx_get(c);

        ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, c,
                      "switching protocol to '%s'", protocol);
        h2_ctx_protocol_set(ctx, protocol);
        h2_ctx_server_set(ctx, s);

        if (r != NULL) {
            apr_status_t status;
            /* Switching in the middle of a request means that
             * we have to send out the response to this one in h2
             * format. So we need to take over the connection
             * right away.
             */
            ap_remove_input_filter_byhandle(r->input_filters, "http_in");
            ap_remove_input_filter_byhandle(r->input_filters, "reqtimeout");

            /* Ok, start an h2_conn on this one. */
            status = h2_conn_rprocess(r);
            if (status != DONE) {
                /* Nothing really to do about this. */
                ap_log_rerror(APLOG_MARK, APLOG_DEBUG, status, r,
                              "session proessed, unexpected status");
            }
        }
        return DONE;
    }

    return DECLINED;
}
Exemple #3
0
int h2_h2_process_conn(conn_rec* c)
{
    apr_status_t status;
    h2_ctx *ctx;
    
    if (c->master) {
        return DECLINED;
    }
    
    ctx = h2_ctx_get(c, 0);
    ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, c, "h2_h2, process_conn");
    if (h2_ctx_is_task(ctx)) {
        /* our stream pseudo connection */
        ap_log_cerror(APLOG_MARK, APLOG_TRACE2, 0, c, "h2_h2, task, declined");
        return DECLINED;
    }
    
    if (!ctx && c->keepalives == 0) {
        const char *proto = ap_get_protocol(c);
        
        if (APLOGctrace1(c)) {
            ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, c, "h2_h2, process_conn, "
                          "new connection using protocol '%s', direct=%d, "
                          "tls acceptable=%d", proto, h2_allows_h2_direct(c), 
                          h2_is_acceptable_connection(c, 1));
        }
        
        if (!strcmp(AP_PROTOCOL_HTTP1, proto)
            && h2_allows_h2_direct(c) 
            && h2_is_acceptable_connection(c, 1)) {
            /* Fresh connection still is on http/1.1 and H2Direct is enabled. 
             * Otherwise connection is in a fully acceptable state.
             * -> peek at the first 24 incoming bytes
             */
            apr_bucket_brigade *temp;
            char *s = NULL;
            apr_size_t slen;
            
            temp = apr_brigade_create(c->pool, c->bucket_alloc);
            status = ap_get_brigade(c->input_filters, temp,
                                    AP_MODE_SPECULATIVE, APR_BLOCK_READ, 24);
            
            if (status != APR_SUCCESS) {
                ap_log_cerror(APLOG_MARK, APLOG_DEBUG, status, c, APLOGNO(03054)
                              "h2_h2, error reading 24 bytes speculative");
                apr_brigade_destroy(temp);
                return DECLINED;
            }
            
            apr_brigade_pflatten(temp, &s, &slen, c->pool);
            if ((slen >= 24) && !memcmp(H2_MAGIC_TOKEN, s, 24)) {
                ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, c,
                              "h2_h2, direct mode detected");
                if (!ctx) {
                    ctx = h2_ctx_get(c, 1);
                }
                h2_ctx_protocol_set(ctx, h2_h2_is_tls(c)? "h2" : "h2c");
            }
            else {
                ap_log_cerror(APLOG_MARK, APLOG_TRACE2, 0, c,
                              "h2_h2, not detected in %d bytes: %s", 
                              (int)slen, s);
            }
            
            apr_brigade_destroy(temp);
        }
    }

    if (ctx) {
        ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, c, "process_conn");
        if (!h2_ctx_session_get(ctx)) {
            status = h2_conn_setup(ctx, c, NULL);
            ap_log_cerror(APLOG_MARK, APLOG_TRACE1, status, c, "conn_setup");
            if (status != APR_SUCCESS) {
                h2_ctx_clear(c);
                return status;
            }
        }
        return h2_conn_run(ctx, c);
    }
    
    ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, c, "h2_h2, declined");
    return DECLINED;
}
Exemple #4
0
int h2_h2_process_conn(conn_rec* c)
{
    h2_ctx *ctx = h2_ctx_get(c);
    
    ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, c, "h2_h2, process_conn");
    if (h2_ctx_is_task(ctx)) {
        /* our stream pseudo connection */
        return DECLINED;
    }

    if (h2_ctx_protocol_get(c)) {
        /* Something has been negotiated */
    }
    else if (!strcmp(AP_PROTOCOL_HTTP1, ap_get_protocol(c))
             && h2_allows_h2_direct(c) 
             && h2_is_acceptable_connection(c, 1)) {
        /* connection still is on http/1.1 and H2Direct is enabled. 
         * Otherwise connection is in a fully acceptable state.
         * -> peek at the first 24 incoming bytes
         */
        apr_bucket_brigade *temp;
        apr_status_t status;
        char *s = NULL;
        apr_size_t slen;
        
        temp = apr_brigade_create(c->pool, c->bucket_alloc);
        status = ap_get_brigade(c->input_filters, temp,
                                AP_MODE_SPECULATIVE, APR_BLOCK_READ, 24);
        
        if (status != APR_SUCCESS) {
            ap_log_cerror(APLOG_MARK, APLOG_DEBUG, status, c,
                          "h2_h2, error reading 24 bytes speculative");
            apr_brigade_destroy(temp);
            return DECLINED;
        }
        
        apr_brigade_pflatten(temp, &s, &slen, c->pool);
        if ((slen >= 24) && !memcmp(H2_MAGIC_TOKEN, s, 24)) {
            ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, c,
                          "h2_h2, direct mode detected");
            h2_ctx_protocol_set(ctx, h2_h2_is_tls(c)? "h2" : "h2c");
        }
        else {
            ap_log_cerror(APLOG_MARK, APLOG_TRACE2, 0, c,
                          "h2_h2, not detected in %d bytes: %s", 
                          (int)slen, s);
        }
        
        apr_brigade_destroy(temp);
    }
    else {
        /* the connection is not HTTP/1.1 or not for us, don't touch it */
        return DECLINED;
    }

    /* If "h2" was selected as protocol (by whatever mechanism), take over
     * the connection.
     */
    if (h2_ctx_is_active(ctx)) {
        ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, c,
                      "h2_h2, connection, h2 active");
        
        return h2_conn_process(c, NULL, ctx->server);
    }
    
    ap_log_cerror(APLOG_MARK, APLOG_TRACE1, 0, c, "h2_h2, declined");
    return DECLINED;
}