int main(int argc, char **argv) { struct fstab_entry proc_entry = {"proc", "/proc", "proc", "defaults"}; struct fstab_entry tmpfs_entry = {"none", "/tmp", "tmpfs", "defaults"}; assert(!has_device(&proc_entry)); assert(!has_device(&tmpfs_entry)); return 0; }
int main(int argc, char *argv[]) { int i = 0; FILE *outfile = NULL; #ifdef LOCAL printf("W: using local mode!\n\n"); #endif system("modprobe floppy 1>/dev/null 2>&1"); get_filesystems(); get_swapspaces(); get_fstab_d_dir(); mkdir(FSTAB_DIR, 0755); /* may not yet exist */ outfile = fopen(FSTAB_FILE, "w"); if(outfile == NULL) return(0); #ifdef DEBUG printf("---------------------------------\n"); #endif /* Not using FSTAB_FILE because it contain /target/ which will * be confusing when read after the boot from HD. */ fprintf(outfile, HEADER, "/etc/fstab"); for(i=0; i<count_entries; i++) { int pass; if(!has_device(entries[i])) pass = 0; else { if(strcmp(entries[i]->mountpoint, "/cdrom") == 0 || strcmp(entries[i]->mountpoint, "/floppy") == 0 || strcmp(entries[i]->typ, "swap") == 0) pass = 0; else if(strcmp(entries[i]->mountpoint, "/") == 0) pass = 1; else pass = 2; mapdevfs(entries[i]); } #ifdef DEBUG fprintf(stdout, "%s\t%s\t%s\t%s\t%d %d\n", entries[i]->filesystem, entries[i]->mountpoint, entries[i]->typ, entries[i]->options, 0, pass); #endif fprintf(outfile, "%s\t%s\t%s\t%s\t%d %d\n", entries[i]->filesystem, entries[i]->mountpoint, entries[i]->typ, entries[i]->options, 0, pass); } fclose(outfile); return(EXIT_SUCCESS); }
int init_ports(struct fpga_model* model, int dup_warn) { int x, y, i, j, k, row_num, row_pos, rc; // inner and outer IO tiles (ILOGIC/ILOGIC/IODELAY) for (x = LEFT_SIDE_WIDTH; x < model->x_width - RIGHT_SIDE_WIDTH; x++) { if (has_device(model, TOP_OUTER_IO, x, DEV_ILOGIC)) { rc = init_iologic_ports(model, TOP_OUTER_IO, x, TOP_S, dup_warn); if (rc) goto xout; } if (has_device(model, TOP_INNER_IO, x, DEV_ILOGIC)) { rc = init_iologic_ports(model, TOP_INNER_IO, x, TOP_S, dup_warn); if (rc) goto xout; } if (has_device(model, model->y_height - BOT_INNER_IO, x, DEV_ILOGIC)) { rc = init_iologic_ports(model, model->y_height - BOT_INNER_IO, x, BOTTOM_S, dup_warn); if (rc) goto xout; } if (has_device(model, model->y_height - BOT_OUTER_IO, x, DEV_ILOGIC)) { rc = init_iologic_ports(model, model->y_height - BOT_OUTER_IO, x, BOTTOM_S, dup_warn); if (rc) goto xout; } } for (y = TOP_IO_TILES; y < model->y_height - BOT_IO_TILES; y++) { if (has_device(model, y, LEFT_IO_DEVS, DEV_ILOGIC)) { rc = init_iologic_ports(model, y, LEFT_IO_DEVS, LEFT_S, dup_warn); if (rc) goto xout; } if (has_device(model, y, model->x_width - RIGHT_IO_DEVS_O, DEV_ILOGIC)) { rc = init_iologic_ports(model, y, model->x_width - RIGHT_IO_DEVS_O, RIGHT_S, dup_warn); if (rc) goto xout; } } for (x = 0; x < model->x_width; x++) { // VCC, GND and fans if (is_atx(X_ROUTING_COL, model, x)) { for (y = TOP_IO_TILES; y < model->y_height - BOT_IO_TILES; y++) { if (is_aty(Y_ROW_HORIZ_AXSYMM|Y_CHIP_HORIZ_REGS, model, y)) continue; rc = add_connpt_name(model, y, x, "VCC_WIRE", dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, "GND_WIRE", dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, "KEEP1_WIRE", dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, "FAN", dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, "FAN_B", dup_warn, 0, 0); if (rc) goto xout; if (!is_atyx(YX_IO_ROUTING, model, y, x)) { for (i = 0; i <= 1; i++) { rc = add_connpt_name(model, y, x, pf("GFAN%i", i), dup_warn, 0, 0); if (rc) goto xout; } } else { if (!is_atx(X_CENTER_ROUTING_COL, model, x) || is_aty(Y_TOPBOT_IO_RANGE, model, y)) { // In the center those 2 wires are connected // to the PLL, but elsewhere? Not clear what they // connect to... rc = add_connpt_name(model, y, x, logicin_s(X_A5, 1 /* routing_io */), dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, logicin_s(X_B4, 1 /* routing_io */), dup_warn, 0, 0); if (rc) goto xout; } } } } // logicin if (is_atx(X_FABRIC_LOGIC_XL_ROUTING_COL |X_CENTER_ROUTING_COL, model, x)) { for (y = TOP_IO_TILES; y < model->y_height - BOT_IO_TILES; y++) { static const int n[] = { 36, 44, 53, 61, 62 }; if (is_aty(Y_TOPBOT_IO_RANGE, model, y) && !is_atx(X_ROUTING_NO_IO, model, x)) continue; if (is_aty(Y_ROW_HORIZ_AXSYMM|Y_CHIP_HORIZ_REGS, model, y)) continue; if (is_atx(X_CENTER_ROUTING_COL, model, x) && (is_aty(Y_ROW_HORIZ_AXSYMM|Y_CHIP_HORIZ_REGS, model, y+1) || is_aty(Y_ROW_HORIZ_AXSYMM, model, y-1))) continue; for (i = 0; i < sizeof(n)/sizeof(*n); i++) { rc = add_connpt_name(model, y, x, pf("LOGICIN_B%i", n[i]), dup_warn, 0, 0); if (rc) goto xout; } } } // bram if (is_atx(X_FABRIC_BRAM_COL, model, x)) { for (y = TOP_IO_TILES; y < model->y_height - BOT_IO_TILES; y++) { if (YX_TILE(model, y, x)->flags & TF_BRAM_DEV) { static const char* pass_str[3] = {"RAMB16BWER", "RAMB8BWER_0", "RAMB8BWER_1"}; // pass 0 is ramb16, pass 1 and 2 are for ramb8 for (i = 0; i <= 2; i++) { for (j = 'A'; j <= 'B'; j++) { rc = add_connpt_name(model, y, x, pf("%s_CLK%c", pass_str[i], j), dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, pf("%s_EN%c", pass_str[i], j), dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, pf("%s_REGCE%c", pass_str[i], j), dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, pf("%s_RST%c", pass_str[i], j), dup_warn, 0, 0); if (rc) goto xout; for (k = 0; k <= (!i ? 3 : 1); k++) { rc = add_connpt_name(model, y, x, pf("%s_DIP%c%i", pass_str[i], j, k), dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, pf("%s_DOP%c%i", pass_str[i], j, k), dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, pf("%s_WE%c%i", pass_str[i], j, k), dup_warn, 0, 0); if (rc) goto xout; } for (k = 0; k <= (!i ? 13 : 12); k++) { rc = add_connpt_name(model, y, x, pf("%s_ADDR%c%i", pass_str[i], j, k), dup_warn, 0, 0); if (rc) goto xout; } for (k = 0; k <= (!i ? 31 : 15); k++) { rc = add_connpt_name(model, y, x, pf("%s_DI%c%i", pass_str[i], j, k), dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, pf("%s_DO%c%i", pass_str[i], j, k), dup_warn, 0, 0); if (rc) goto xout; } } } } } } // macc if (is_atx(X_FABRIC_MACC_COL, model, x)) { for (y = TOP_IO_TILES; y < model->y_height - BOT_IO_TILES; y++) { if (YX_TILE(model, y, x)->flags & TF_MACC_DEV) { static const char* pref[] = {"CE", "RST", ""}; static const char* seq[] = {"A", "B", "C", "D", "M", "P", "OPMODE", ""}; is_in_row(model, y, &row_num, &row_pos); if (!row_num && row_pos == LAST_POS_IN_ROW) { rc = add_connpt_name(model, y, x, "CARRYIN_DSP48A1_SITE", dup_warn, 0, 0); if (rc) goto xout; for (i = 0; i <= 47; i++) { rc = add_connpt_name(model, y, x, pf("PCIN%i_DSP48A1_SITE", i), dup_warn, 0, 0); if (rc) goto xout; } } rc = add_connpt_name(model, y, x, "CLK_DSP48A1_SITE", dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, "CARRYOUT_DSP48A1_SITE", dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, "CARRYOUTF_DSP48A1_SITE", dup_warn, 0, 0); if (rc) goto xout; for (i = 0; pref[i][0]; i++) { rc = add_connpt_name(model, y, x, pf("%sCARRYIN_DSP48A1_SITE", pref[i]), dup_warn, 0, 0); if (rc) goto xout; for (j = 0; seq[j][0]; j++) { rc = add_connpt_name(model, y, x, pf("%s%s_DSP48A1_SITE", pref[i], seq[j]), dup_warn, 0, 0); if (rc) goto xout; } } for (i = 0; i <= 17; i++) { rc = add_connpt_name(model, y, x, pf("A%i_DSP48A1_SITE", i), dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, pf("B%i_DSP48A1_SITE", i), dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, pf("D%i_DSP48A1_SITE", i), dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, pf("BCOUT%i_DSP48A1_SITE", i), dup_warn, 0, 0); if (rc) goto xout; } for (i = 0; i <= 47; i++) { rc = add_connpt_name(model, y, x, pf("C%i_DSP48A1_SITE", i), dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, pf("P%i_DSP48A1_SITE", i), dup_warn, 0, 0); if (rc) goto xout; rc = add_connpt_name(model, y, x, pf("PCOUT%i_DSP48A1_SITE", i), dup_warn, 0, 0); if (rc) goto xout; } for (i = 0; i <= 35; i++) { rc = add_connpt_name(model, y, x, pf("M%i_DSP48A1_SITE", i), dup_warn, 0, 0); if (rc) goto xout; } for (i = 0; i <= 7; i++) { rc = add_connpt_name(model, y, x, pf("OPMODE%i_DSP48A1_SITE", i), dup_warn, 0, 0); if (rc) goto xout; } } } } } return 0; xout: return rc; }