/*----------------------------------------------------------------
* prism2mgmt_autojoin
*
* Associate with an ESS.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
* interrupt
*----------------------------------------------------------------
*/
int prism2mgmt_autojoin(struct wlandevice *wlandev, void *msgp)
{
struct hfa384x *hw = wlandev->priv;
int result = 0;
u16 reg;
u16 port_type;
struct p80211msg_lnxreq_autojoin *msg = msgp;
struct p80211pstrd *pstr;
u8 bytebuf[256];
struct hfa384x_bytestr *p2bytestr = (struct hfa384x_bytestr *)bytebuf;
wlandev->macmode = WLAN_MACMODE_NONE;
/* Set the SSID */
memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));
/* Disable the Port */
hfa384x_drvr_disable(hw, 0);
/*** STATION ***/
/* Set the TxRates */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, 0x000f);
/* Set the auth type */
if (msg->authtype.data == P80211ENUM_authalg_sharedkey)
reg = HFA384x_CNFAUTHENTICATION_SHAREDKEY;
else
reg = HFA384x_CNFAUTHENTICATION_OPENSYSTEM;
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAUTHENTICATION, reg);
/* Set the ssid */
memset(bytebuf, 0, 256);
pstr = (struct p80211pstrd *)&(msg->ssid.data);
prism2mgmt_pstr2bytestr(p2bytestr, pstr);
result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
bytebuf,
HFA384x_RID_CNFDESIREDSSID_LEN);
port_type = HFA384x_PORTTYPE_BSS;
/* Set the PortType */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, port_type);
/* Enable the Port */
hfa384x_drvr_enable(hw, 0);
/* Set the resultcode */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_success;
return result;
}
static void prism2sta_inf_scanresults(wlandevice_t *wlandev,
hfa384x_InfFrame_t *inf)
{
hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
int nbss;
hfa384x_ScanResult_t *sr = &(inf->info.scanresult);
int i;
hfa384x_JoinRequest_data_t joinreq;
int result;
nbss = (inf->framelen * sizeof(u16)) -
sizeof(inf->infotype) - sizeof(inf->info.scanresult.scanreason);
nbss /= sizeof(hfa384x_ScanResultSub_t);
pr_debug("rx scanresults, reason=%d, nbss=%d:\n",
inf->info.scanresult.scanreason, nbss);
for (i = 0; i < nbss; i++) {
pr_debug("chid=%d anl=%d sl=%d bcnint=%d\n",
sr->result[i].chid,
sr->result[i].anl,
sr->result[i].sl, sr->result[i].bcnint);
pr_debug(" capinfo=0x%04x proberesp_rate=%d\n",
sr->result[i].capinfo, sr->result[i].proberesp_rate);
}
joinreq.channel = sr->result[0].chid;
memcpy(joinreq.bssid, sr->result[0].bssid, WLAN_BSSID_LEN);
result = hfa384x_drvr_setconfig(hw,
HFA384x_RID_JOINREQUEST,
&joinreq, HFA384x_RID_JOINREQUEST_LEN);
if (result) {
printk(KERN_ERR "setconfig(joinreq) failed, result=%d\n",
result);
}
return;
}
static int prism2mib_priv(struct mibrec *mib,
int isget,
wlandevice_t *wlandev,
hfa384x_t *hw,
struct p80211msg_dot11req_mibset *msg, void *data)
{
p80211pstrd_t *pstr = (p80211pstrd_t *) data;
int result;
switch (mib->did) {
case DIDmib_lnx_lnxConfigTable_lnxRSNAIE:{
hfa384x_WPAData_t wpa;
if (isget) {
hfa384x_drvr_getconfig(hw,
HFA384x_RID_CNFWPADATA,
(u8 *) &wpa,
sizeof(wpa));
pstr->len = le16_to_cpu(wpa.datalen);
memcpy(pstr->data, wpa.data, pstr->len);
} else {
wpa.datalen = cpu_to_le16(pstr->len);
memcpy(wpa.data, pstr->data, pstr->len);
result =
hfa384x_drvr_setconfig(hw,
HFA384x_RID_CNFWPADATA,
(u8 *) &wpa,
sizeof(wpa));
}
break;
}
default:
printk(KERN_ERR "Unhandled DID 0x%08x\n", mib->did);
}
return 0;
}
static int prism2mib_priv(struct mibrec *mib,
int isget,
struct wlandevice *wlandev,
struct hfa384x *hw,
struct p80211msg_dot11req_mibset *msg, void *data)
{
struct p80211pstrd *pstr = data;
switch (mib->did) {
case DIDmib_lnx_lnxConfigTable_lnxRSNAIE:{
struct hfa384x_wpa_data wpa;
if (isget) {
hfa384x_drvr_getconfig(hw,
HFA384x_RID_CNFWPADATA,
(u8 *)&wpa,
sizeof(wpa));
pstr->len = le16_to_cpu(wpa.datalen);
memcpy(pstr->data, wpa.data, pstr->len);
} else {
wpa.datalen = cpu_to_le16(pstr->len);
memcpy(wpa.data, pstr->data, pstr->len);
hfa384x_drvr_setconfig(hw,
HFA384x_RID_CNFWPADATA,
(u8 *)&wpa,
sizeof(wpa));
}
break;
}
default:
netdev_err(wlandev->netdev, "Unhandled DID 0x%08x\n", mib->did);
}
return 0;
}
static int prism2mib_wepdefaultkey(struct mibrec *mib,
int isget,
struct wlandevice *wlandev,
struct hfa384x *hw,
struct p80211msg_dot11req_mibset *msg,
void *data)
{
int result;
struct p80211pstrd *pstr = data;
u8 bytebuf[MIB_TMP_MAXLEN];
u16 len;
if (isget) {
result = 0; /* Should never happen. */
} else {
len = (pstr->len > 5) ? HFA384x_RID_CNFWEP128DEFAULTKEY_LEN :
HFA384x_RID_CNFWEPDEFAULTKEY_LEN;
memset(bytebuf, 0, len);
memcpy(bytebuf, pstr->data, pstr->len);
result = hfa384x_drvr_setconfig(hw, mib->parm1, bytebuf, len);
}
return result;
}
static int prism2mib_bytearea2pstr(struct mibrec *mib,
int isget,
struct wlandevice *wlandev,
struct hfa384x *hw,
struct p80211msg_dot11req_mibset *msg,
void *data)
{
int result;
struct p80211pstrd *pstr = data;
u8 bytebuf[MIB_TMP_MAXLEN];
if (isget) {
result =
hfa384x_drvr_getconfig(hw, mib->parm1, bytebuf, mib->parm2);
prism2mgmt_bytearea2pstr(bytebuf, pstr, mib->parm2);
} else {
memset(bytebuf, 0, mib->parm2);
memcpy(bytebuf, pstr->data, pstr->len);
result =
hfa384x_drvr_setconfig(hw, mib->parm1, bytebuf, mib->parm2);
}
return result;
}
static int prism2mib_bytearea2pstr(struct mibrec *mib,
int isget,
wlandevice_t *wlandev,
hfa384x_t *hw,
struct p80211msg_dot11req_mibset *msg,
void *data)
{
int result;
p80211pstrd_t *pstr = (p80211pstrd_t *) data;
u8 bytebuf[MIB_TMP_MAXLEN];
if (isget) {
result =
hfa384x_drvr_getconfig(hw, mib->parm1, bytebuf, mib->parm2);
prism2mgmt_bytearea2pstr(bytebuf, pstr, mib->parm2);
} else {
memset(bytebuf, 0, mib->parm2);
prism2mgmt_pstr2bytearea(bytebuf, pstr);
result =
hfa384x_drvr_setconfig(hw, mib->parm1, bytebuf, mib->parm2);
}
return result;
}
static int prism2mib_wepdefaultkey(mibrec_t *mib,
int isget,
wlandevice_t *wlandev,
hfa384x_t *hw,
p80211msg_dot11req_mibset_t *msg,
void *data)
{
int result;
p80211pstrd_t *pstr = (p80211pstrd_t *) data;
u8 bytebuf[MIB_TMP_MAXLEN];
u16 len;
if (isget) {
result = 0; /* Should never happen. */
} else {
len = (pstr->len > 5) ? HFA384x_RID_CNFWEP128DEFAULTKEY_LEN :
HFA384x_RID_CNFWEPDEFAULTKEY_LEN;
memset(bytebuf, 0, len);
prism2mgmt_pstr2bytearea(bytebuf, pstr);
result = hfa384x_drvr_setconfig(hw, mib->parm1, bytebuf, len);
}
return result;
}
/*----------------------------------------------------------------
* prism2mgmt_start
*
* Start a BSS. Any station can do this for IBSS, only AP for ESS.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
* interrupt
*----------------------------------------------------------------
*/
int prism2mgmt_start(struct wlandevice *wlandev, void *msgp)
{
int result = 0;
struct hfa384x *hw = wlandev->priv;
struct p80211msg_dot11req_start *msg = msgp;
struct p80211pstrd *pstr;
u8 bytebuf[80];
struct hfa384x_bytestr *p2bytestr = (struct hfa384x_bytestr *)bytebuf;
u16 word;
wlandev->macmode = WLAN_MACMODE_NONE;
/* Set the SSID */
memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));
/*** ADHOC IBSS ***/
/* see if current f/w is less than 8c3 */
if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
hw->ident_sta_fw.minor,
hw->ident_sta_fw.variant) <
HFA384x_FIRMWARE_VERSION(0, 8, 3)) {
/* Ad-Hoc not quite supported on Prism2 */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
goto done;
}
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
/*** STATION ***/
/* Set the REQUIRED config items */
/* SSID */
pstr = (struct p80211pstrd *)&msg->ssid.data;
prism2mgmt_pstr2bytestr(p2bytestr, pstr);
result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFOWNSSID,
bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
if (result) {
netdev_err(wlandev->netdev, "Failed to set CnfOwnSSID\n");
goto failed;
}
result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
bytebuf,
HFA384x_RID_CNFDESIREDSSID_LEN);
if (result) {
netdev_err(wlandev->netdev, "Failed to set CnfDesiredSSID\n");
goto failed;
}
/* bsstype - we use the default in the ap firmware */
/* IBSS port */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 0);
/* beacon period */
word = msg->beaconperiod.data;
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAPBCNINT, word);
if (result) {
netdev_err(wlandev->netdev,
"Failed to set beacon period=%d.\n", word);
goto failed;
}
/* dschannel */
word = msg->dschannel.data;
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNCHANNEL, word);
if (result) {
netdev_err(wlandev->netdev,
"Failed to set channel=%d.\n", word);
goto failed;
}
/* Basic rates */
word = p80211rate_to_p2bit(msg->basicrate1.data);
if (msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate2.data);
if (msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate3.data);
if (msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate4.data);
if (msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate5.data);
if (msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate6.data);
if (msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate7.data);
if (msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate8.data);
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, word);
if (result) {
netdev_err(wlandev->netdev,
"Failed to set basicrates=%d.\n", word);
goto failed;
}
/* Operational rates (supprates and txratecontrol) */
word = p80211rate_to_p2bit(msg->operationalrate1.data);
if (msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate2.data);
if (msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate3.data);
if (msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate4.data);
if (msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate5.data);
if (msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate6.data);
if (msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate7.data);
if (msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate8.data);
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, word);
if (result) {
netdev_err(wlandev->netdev,
"Failed to set supprates=%d.\n", word);
goto failed;
}
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, word);
if (result) {
netdev_err(wlandev->netdev, "Failed to set txrates=%d.\n",
word);
goto failed;
}
/* Set the macmode so the frame setup code knows what to do */
if (msg->bsstype.data == P80211ENUM_bsstype_independent) {
wlandev->macmode = WLAN_MACMODE_IBSS_STA;
/* lets extend the data length a bit */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN, 2304);
}
/* Enable the Port */
result = hfa384x_drvr_enable(hw, 0);
if (result) {
netdev_err(wlandev->netdev,
"Enable macport failed, result=%d.\n", result);
goto failed;
}
msg->resultcode.data = P80211ENUM_resultcode_success;
goto done;
failed:
netdev_dbg(wlandev->netdev,
"Failed to set a config option, result=%d\n", result);
msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
done:
return 0;
}
/*----------------------------------------------------------------
* prism2mgmt_scan
*
* Initiate a scan for BSSs.
*
* This function corresponds to MLME-scan.request and part of
* MLME-scan.confirm. As far as I can tell in the standard, there
* are no restrictions on when a scan.request may be issued. We have
* to handle in whatever state the driver/MAC happen to be.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
* interrupt
*----------------------------------------------------------------
*/
int prism2mgmt_scan(struct wlandevice *wlandev, void *msgp)
{
int result = 0;
struct hfa384x *hw = wlandev->priv;
struct p80211msg_dot11req_scan *msg = msgp;
u16 roamingmode, word;
int i, timeout;
int istmpenable = 0;
struct hfa384x_host_scan_request_data scanreq;
/* gatekeeper check */
if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
hw->ident_sta_fw.minor,
hw->ident_sta_fw.variant) <
HFA384x_FIRMWARE_VERSION(1, 3, 2)) {
netdev_err(wlandev->netdev,
"HostScan not supported with current firmware (<1.3.2).\n");
result = 1;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
goto exit;
}
memset(&scanreq, 0, sizeof(scanreq));
/* save current roaming mode */
result = hfa384x_drvr_getconfig16(hw,
HFA384x_RID_CNFROAMINGMODE,
&roamingmode);
if (result) {
netdev_err(wlandev->netdev,
"getconfig(ROAMMODE) failed. result=%d\n", result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
/* drop into mode 3 for the scan */
result = hfa384x_drvr_setconfig16(hw,
HFA384x_RID_CNFROAMINGMODE,
HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
if (result) {
netdev_err(wlandev->netdev,
"setconfig(ROAMINGMODE) failed. result=%d\n",
result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
/* active or passive? */
if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
hw->ident_sta_fw.minor,
hw->ident_sta_fw.variant) >
HFA384x_FIRMWARE_VERSION(1, 5, 0)) {
if (msg->scantype.data != P80211ENUM_scantype_active)
word = msg->maxchanneltime.data;
else
word = 0;
result =
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPASSIVESCANCTRL,
word);
if (result) {
netdev_warn(wlandev->netdev,
"Passive scan not supported with current firmware. (<1.5.1)\n");
}
}
/* set up the txrate to be 2MBPS. Should be fastest basicrate... */
word = HFA384x_RATEBIT_2;
scanreq.tx_rate = cpu_to_le16(word);
/* set up the channel list */
word = 0;
for (i = 0; i < msg->channellist.data.len; i++) {
u8 channel = msg->channellist.data.data[i];
if (channel > 14)
continue;
/* channel 1 is BIT 0 ... channel 14 is BIT 13 */
word |= (1 << (channel - 1));
}
scanreq.channel_list = cpu_to_le16(word);
/* set up the ssid, if present. */
scanreq.ssid.len = cpu_to_le16(msg->ssid.data.len);
memcpy(scanreq.ssid.data, msg->ssid.data.data, msg->ssid.data.len);
/* Enable the MAC port if it's not already enabled */
result = hfa384x_drvr_getconfig16(hw, HFA384x_RID_PORTSTATUS, &word);
if (result) {
netdev_err(wlandev->netdev,
"getconfig(PORTSTATUS) failed. result=%d\n", result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
if (word == HFA384x_PORTSTATUS_DISABLED) {
__le16 wordbuf[17];
result = hfa384x_drvr_setconfig16(hw,
HFA384x_RID_CNFROAMINGMODE,
HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
if (result) {
netdev_err(wlandev->netdev,
"setconfig(ROAMINGMODE) failed. result=%d\n",
result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
/* Construct a bogus SSID and assign it to OwnSSID and
* DesiredSSID
*/
wordbuf[0] = cpu_to_le16(WLAN_SSID_MAXLEN);
get_random_bytes(&wordbuf[1], WLAN_SSID_MAXLEN);
result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFOWNSSID,
wordbuf,
HFA384x_RID_CNFOWNSSID_LEN);
if (result) {
netdev_err(wlandev->netdev, "Failed to set OwnSSID.\n");
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
wordbuf,
HFA384x_RID_CNFDESIREDSSID_LEN);
if (result) {
netdev_err(wlandev->netdev,
"Failed to set DesiredSSID.\n");
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
/* bsstype */
result = hfa384x_drvr_setconfig16(hw,
HFA384x_RID_CNFPORTTYPE,
HFA384x_PORTTYPE_IBSS);
if (result) {
netdev_err(wlandev->netdev,
"Failed to set CNFPORTTYPE.\n");
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
/* ibss options */
result = hfa384x_drvr_setconfig16(hw,
HFA384x_RID_CREATEIBSS,
HFA384x_CREATEIBSS_JOINCREATEIBSS);
if (result) {
netdev_err(wlandev->netdev,
"Failed to set CREATEIBSS.\n");
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
result = hfa384x_drvr_enable(hw, 0);
if (result) {
netdev_err(wlandev->netdev,
"drvr_enable(0) failed. result=%d\n",
result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
istmpenable = 1;
}
/* Figure out our timeout first Kus, then HZ */
timeout = msg->channellist.data.len * msg->maxchanneltime.data;
timeout = (timeout * HZ) / 1000;
/* Issue the scan request */
hw->scanflag = 0;
result = hfa384x_drvr_setconfig(hw,
HFA384x_RID_HOSTSCAN, &scanreq,
sizeof(scanreq));
if (result) {
netdev_err(wlandev->netdev,
"setconfig(SCANREQUEST) failed. result=%d\n",
result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
/* sleep until info frame arrives */
wait_event_interruptible_timeout(hw->cmdq, hw->scanflag, timeout);
msg->numbss.status = P80211ENUM_msgitem_status_data_ok;
if (hw->scanflag == -1)
hw->scanflag = 0;
msg->numbss.data = hw->scanflag;
hw->scanflag = 0;
/* Disable port if we temporarily enabled it. */
if (istmpenable) {
result = hfa384x_drvr_disable(hw, 0);
if (result) {
netdev_err(wlandev->netdev,
"drvr_disable(0) failed. result=%d\n",
result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
}
/* restore original roaming mode */
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFROAMINGMODE,
roamingmode);
if (result) {
netdev_err(wlandev->netdev,
"setconfig(ROAMMODE) failed. result=%d\n", result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
result = 0;
msg->resultcode.data = P80211ENUM_resultcode_success;
exit:
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
return result;
}
/*----------------------------------------------------------------
* prism2mgmt_autojoin
*
* Associate with an ESS.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
* interrupt
----------------------------------------------------------------*/
int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp)
{
hfa384x_t *hw = wlandev->priv;
int result = 0;
u16 reg;
u16 port_type;
p80211msg_lnxreq_autojoin_t *msg = msgp;
p80211pstrd_t *pstr;
u8 bytebuf[256];
hfa384x_bytestr_t *p2bytestr = (hfa384x_bytestr_t*)bytebuf;
DBFENTER;
wlandev->macmode = WLAN_MACMODE_NONE;
/* Set the SSID */
memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));
/* Disable the Port */
hfa384x_drvr_disable(hw, 0);
/*** STATION ***/
/* Set the TxRates */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, 0x000f);
/* Set the auth type */
if ( msg->authtype.data == P80211ENUM_authalg_sharedkey ) {
reg = HFA384x_CNFAUTHENTICATION_SHAREDKEY;
} else {
reg = HFA384x_CNFAUTHENTICATION_OPENSYSTEM;
}
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAUTHENTICATION, reg);
/* Set the ssid */
memset(bytebuf, 0, 256);
pstr = (p80211pstrd_t*)&(msg->ssid.data);
prism2mgmt_pstr2bytestr(p2bytestr, pstr);
result = hfa384x_drvr_setconfig(
hw, HFA384x_RID_CNFDESIREDSSID,
bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
#if 0
/* we can use the new-fangled auto-unknown mode if the firmware
is 1.3.3 or newer */
if (HFA384x_FIRMARE_VERSION(hw->ident_sta_fw.major,
hw->ident_sta_fw.minor,
hw->ident_sta_fw.variant) >=
HFA384x_FIRMWARE_VERSION(1,3,3)) {
/* Set up the IBSS options */
reg = HFA384x_CREATEIBSS_JOINESS_JOINCREATEIBSS;
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CREATEIBSS, reg);
/* Set the PortType */
port_type = HFA384x_PORTTYPE_IBSS;
} else {
port_type = HFA384x_PORTTYPE_BSS;
}
#else
port_type = HFA384x_PORTTYPE_BSS;
#endif
/* Set the PortType */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, port_type);
/* Enable the Port */
hfa384x_drvr_enable(hw, 0);
/* Set the resultcode */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_success;
DBFEXIT;
return result;
}
/*
* Performs the sequence necessary to write a 16/32 bit config/info item.
*
* Arguments:
* hw device structure
* rid config/info record id (in host order)
* val 16/32 bit value to store (in host order)
*
* Returns:
* 0 success
*/
static int hfa384x_drvr_setconfig16(hfa384x_t *hw, uint16_t rid, uint16_t *val)
{
uint16_t value;
value = host2hfa384x_16(*val);
return hfa384x_drvr_setconfig(hw, rid, &value, sizeof(uint16_t));
}
#if 0 /* Not actually used anywhere */
static int hfa384x_drvr_setconfig32(hfa384x_t *hw, uint16_t rid, uint32_t *val)
{
uint32_t value;
value = host2hfa384x_32(*val);
return hfa384x_drvr_setconfig(hw, rid, &value, sizeof(uint32_t));
}
/*
* Performs the sequence necessary to write a 16/32 bit config/info item.
*
* Arguments:
* hw device structure
* rid config/info record id (in host order)
* val 16/32 bit value to store (in host order)
*
* Returns:
* 0 success
*/
static int hfa384x_drvr_setconfig16(hfa384x_t *hw, UINT16 rid, UINT16 *val)
{
UINT16 value;
value = host2hfa384x_16(*val);
return hfa384x_drvr_setconfig(hw, rid, &value, sizeof(UINT16));
}
#if 0 /* Not actually used anywhere */
static int hfa384x_drvr_setconfig32(hfa384x_t *hw, UINT16 rid, UINT32 *val)
{
UINT32 value;
value = host2hfa384x_32(*val);
return hfa384x_drvr_setconfig(hw, rid, &value, sizeof(UINT32));
}
/*
* Performs the sequence necessary to write a 16/32 bit config/info item.
*
* Arguments:
* hw device structure
* rid config/info record id (in host order)
* val 16/32 bit value to store (in host order)
*
* Returns:
* 0 success
*/
static int hfa384x_drvr_setconfig16(hfa384x_t *hw, UINT16 rid, UINT16 *val)
{
UINT16 value;
value = host2hfa384x_16(*val);
return hfa384x_drvr_setconfig(hw, rid, &value, sizeof(UINT16));
}