static void ieee80211n_scan_channels_2g4(struct hostapd_iface *iface,
struct wpa_driver_scan_params *params)
{
/* Scan only the affected frequency range */
int pri_freq, sec_freq;
int affected_start, affected_end;
int i, pos;
struct hostapd_hw_modes *mode;
if (iface->current_mode == NULL)
return;
pri_freq = hostapd_hw_get_freq(iface->bss[0], iface->conf->channel);
if (iface->conf->secondary_channel > 0)
sec_freq = pri_freq + 20;
else
sec_freq = pri_freq - 20;
/*
* Note: Need to find the PRI channel also in cases where the affected
* channel is the SEC channel of a 40 MHz BSS, so need to include the
* scanning coverage here to be 40 MHz from the center frequency.
*/
affected_start = (pri_freq + sec_freq) / 2 - 40;
affected_end = (pri_freq + sec_freq) / 2 + 40;
wpa_printf(MSG_DEBUG, "40 MHz affected channel range: [%d,%d] MHz",
affected_start, affected_end);
mode = iface->current_mode;
params->freqs = os_calloc(mode->num_channels + 1, sizeof(int));
if (params->freqs == NULL)
return;
pos = 0;
for (i = 0; i < mode->num_channels; i++) {
struct hostapd_channel_data *chan = &mode->channels[i];
if (chan->flag & HOSTAPD_CHAN_DISABLED)
continue;
if (chan->freq < affected_start ||
chan->freq > affected_end)
continue;
params->freqs[pos++] = chan->freq;
}
}
int hostapd_acs_completed(struct hostapd_iface *iface, int err)
{
int ret = -1;
if (err)
goto out;
switch (hostapd_check_chans(iface)) {
case HOSTAPD_CHAN_VALID:
wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO,
ACS_EVENT_COMPLETED "freq=%d channel=%d",
hostapd_hw_get_freq(iface->bss[0],
iface->conf->channel),
iface->conf->channel);
break;
case HOSTAPD_CHAN_ACS:
wpa_printf(MSG_ERROR, "ACS error - reported complete, but no result available");
wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, ACS_EVENT_FAILED);
hostapd_notify_bad_chans(iface);
goto out;
case HOSTAPD_CHAN_INVALID:
default:
wpa_printf(MSG_ERROR, "ACS picked unusable channels");
wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, ACS_EVENT_FAILED);
hostapd_notify_bad_chans(iface);
goto out;
}
ret = hostapd_check_ht_capab(iface);
if (ret < 0)
goto out;
if (ret == 1) {
wpa_printf(MSG_DEBUG, "Interface initialization will be completed in a callback");
return 0;
}
ret = 0;
out:
return hostapd_setup_interface_complete(iface, ret);
}
static void ieee80211n_scan_channels_5g(struct hostapd_iface *iface, struct wpa_driver_scan_params *params)
{
/* Scan only the affected frequency range */
int pri_freq;
int affected_start, affected_end;
int i, pos;
struct hostapd_hw_modes *mode;
if (iface->current_mode == NULL) {
return;
}
pri_freq = hostapd_hw_get_freq(iface->bss[0], iface->conf->channel);
if (iface->conf->secondary_channel > 0) {
affected_start = pri_freq - 10;
affected_end = pri_freq + 30;
} else {
affected_start = pri_freq - 30;
affected_end = pri_freq + 10;
}
wpa_printf(MSG_DEBUG, "40 MHz affected channel range: [%d,%d] MHz", affected_start, affected_end);
mode = iface->current_mode;
params->freqs = os_calloc(mode->num_channels + 1, sizeof(int));
if (params->freqs == NULL) {
return;
}
pos = 0;
for (i = 0; i < mode->num_channels; i++) {
struct hostapd_channel_data *chan = &mode->channels[i];
if (chan->flag & HOSTAPD_CHAN_DISABLED) {
continue;
}
if (chan->freq < affected_start || chan->freq > affected_end) {
continue;
}
params->freqs[pos++] = chan->freq;
}
}
static void ieee80211n_scan_channels_2g4(struct hostapd_iface *iface,
struct wpa_driver_scan_params *params)
{
/* Scan only the affected frequency range */
int pri_freq, sec_freq;
int affected_start, affected_end;
int i, pos;
struct hostapd_hw_modes *mode;
if (iface->current_mode == NULL)
return;
pri_freq = hostapd_hw_get_freq(iface->bss[0], iface->conf->channel);
if (iface->conf->secondary_channel > 0)
sec_freq = pri_freq + 20;
else
sec_freq = pri_freq - 20;
affected_start = (pri_freq + sec_freq) / 2 - 25;
affected_end = (pri_freq + sec_freq) / 2 + 25;
wpa_printf(MSG_DEBUG, "40 MHz affected channel range: [%d,%d] MHz",
affected_start, affected_end);
mode = iface->current_mode;
params->freqs = os_zalloc((mode->num_channels + 1) * sizeof(int));
if (params->freqs == NULL)
return;
pos = 0;
for (i = 0; i < mode->num_channels; i++) {
struct hostapd_channel_data *chan = &mode->channels[i];
if (chan->flag & HOSTAPD_CHAN_DISABLED)
continue;
if (chan->freq < affected_start ||
chan->freq > affected_end)
continue;
params->freqs[pos++] = chan->freq;
}
}
static int ieee80211n_check_40mhz_5g(struct hostapd_iface *iface,
struct wpa_scan_results *scan_res)
{
int pri_chan, sec_chan, pri_freq, sec_freq, pri_bss, sec_bss;
int bss_pri_chan, bss_sec_chan;
size_t i;
int match;
pri_chan = iface->conf->channel;
sec_chan = iface->conf->secondary_channel * 4;
pri_freq = hostapd_hw_get_freq(iface->bss[0], pri_chan);
if (iface->conf->secondary_channel > 0)
sec_freq = pri_freq + 20;
else
sec_freq = pri_freq - 20;
/*
* Switch PRI/SEC channels if Beacons were detected on selected SEC
* channel, but not on selected PRI channel.
*/
pri_bss = sec_bss = 0;
for (i = 0; i < scan_res->num; i++) {
struct wpa_scan_res *bss = scan_res->res[i];
if (bss->freq == pri_freq)
pri_bss++;
else if (bss->freq == sec_freq)
sec_bss++;
}
if (sec_bss && !pri_bss) {
wpa_printf(MSG_INFO, "Switch own primary and secondary "
"channel to get secondary channel with no Beacons "
"from other BSSes");
ieee80211n_switch_pri_sec(iface);
}
/*
* Match PRI/SEC channel with any existing HT40 BSS on the same
* channels that we are about to use (if already mixed order in
* existing BSSes, use own preference).
*/
match = 0;
for (i = 0; i < scan_res->num; i++) {
struct wpa_scan_res *bss = scan_res->res[i];
ieee80211n_get_pri_sec_chan(bss, &bss_pri_chan, &bss_sec_chan);
if (pri_chan == bss_pri_chan &&
sec_chan == bss_sec_chan) {
match = 1;
break;
}
}
if (!match) {
for (i = 0; i < scan_res->num; i++) {
struct wpa_scan_res *bss = scan_res->res[i];
ieee80211n_get_pri_sec_chan(bss, &bss_pri_chan,
&bss_sec_chan);
if (pri_chan == bss_sec_chan &&
sec_chan == bss_pri_chan) {
wpa_printf(MSG_INFO, "Switch own primary and "
"secondary channel due to BSS "
"overlap with " MACSTR,
MAC2STR(bss->bssid));
ieee80211n_switch_pri_sec(iface);
break;
}
}
}
return 1;
}
void hostapd_acs_channel_selected(struct hostapd_data *hapd,
struct acs_selected_channels *acs_res)
{
int ret, i;
int err = 0;
if (hapd->iconf->channel) {
wpa_printf(MSG_INFO, "ACS: Channel was already set to %d",
hapd->iconf->channel);
return;
}
if (!hapd->iface->current_mode) {
for (i = 0; i < hapd->iface->num_hw_features; i++) {
struct hostapd_hw_modes *mode =
&hapd->iface->hw_features[i];
if (mode->mode == acs_res->hw_mode) {
hapd->iface->current_mode = mode;
break;
}
}
if (!hapd->iface->current_mode) {
hostapd_logger(hapd, NULL, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_WARNING,
"driver selected to bad hw_mode");
err = 1;
goto out;
}
}
hapd->iface->freq = hostapd_hw_get_freq(hapd, acs_res->pri_channel);
if (!acs_res->pri_channel) {
hostapd_logger(hapd, NULL, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_WARNING,
"driver switched to bad channel");
err = 1;
goto out;
}
hapd->iconf->channel = acs_res->pri_channel;
hapd->iconf->acs = 1;
if (acs_res->sec_channel == 0)
hapd->iconf->secondary_channel = 0;
else if (acs_res->sec_channel < acs_res->pri_channel)
hapd->iconf->secondary_channel = -1;
else if (acs_res->sec_channel > acs_res->pri_channel)
hapd->iconf->secondary_channel = 1;
else {
wpa_printf(MSG_ERROR, "Invalid secondary channel!");
err = 1;
goto out;
}
if (hapd->iface->conf->ieee80211ac) {
/* set defaults for backwards compatibility */
hapd->iconf->vht_oper_centr_freq_seg1_idx = 0;
hapd->iconf->vht_oper_centr_freq_seg0_idx = 0;
hapd->iconf->vht_oper_chwidth = VHT_CHANWIDTH_USE_HT;
if (acs_res->ch_width == 80) {
hapd->iconf->vht_oper_centr_freq_seg0_idx =
acs_res->vht_seg0_center_ch;
hapd->iconf->vht_oper_chwidth = VHT_CHANWIDTH_80MHZ;
} else if (acs_res->ch_width == 160) {
if (acs_res->vht_seg1_center_ch == 0) {
hapd->iconf->vht_oper_centr_freq_seg0_idx =
acs_res->vht_seg0_center_ch;
hapd->iconf->vht_oper_chwidth =
VHT_CHANWIDTH_160MHZ;
} else {
hapd->iconf->vht_oper_centr_freq_seg0_idx =
acs_res->vht_seg0_center_ch;
hapd->iconf->vht_oper_centr_freq_seg1_idx =
acs_res->vht_seg1_center_ch;
hapd->iconf->vht_oper_chwidth =
VHT_CHANWIDTH_80P80MHZ;
}
}
}
out:
ret = hostapd_acs_completed(hapd->iface, err);
if (ret) {
wpa_printf(MSG_ERROR,
"ACS: Possibly channel configuration is invalid");
}
}
