uint8_t smbus_read_byte(i2c_bus *bus, int addr, uint8_t command)
{
uint8_t data;
i2c_start_transfer(bus, addr, 0);
i2c_send(bus, command);
i2c_start_transfer(bus, addr, 1);
data = i2c_recv(bus);
i2c_nack(bus);
i2c_end_transfer(bus);
return data;
}
uint16_t smbus_read_word(i2c_bus *bus, uint8_t addr, uint8_t command)
{
uint16_t data;
i2c_start_transfer(bus, addr, 0);
i2c_send(bus, command);
i2c_start_transfer(bus, addr, 1);
data = i2c_recv(bus);
data |= i2c_recv(bus) << 8;
i2c_nack(bus);
i2c_end_transfer(bus);
return data;
}
void smbus_write_byte(i2c_bus *bus, int addr, uint8_t command, uint8_t data)
{
i2c_start_transfer(bus, addr, 0);
i2c_send(bus, command);
i2c_send(bus, data);
i2c_end_transfer(bus);
}
void i2c_common(mal_i2c_s *handle) {
// Check if transmission is complete
if (I2C_GetITStatus(handle->stm_handle, I2C_IT_TC) == SET) {
// Transmit complete, stop transfer, clear interrupt with stop
I2C_GenerateSTOP(handle->stm_handle, ENABLE);
// Make sure it was expected
if (I2C_STATE_WAITING_TRANSFER_COMPLETE != handle->state) {
// We are in error
handle->state = (volatile mal_hspec_stm32f0_i2c_states_e)I2C_STATE_ERROR;
} else {
// Next state
handle->state = (volatile mal_hspec_stm32f0_i2c_states_e)I2C_STATE_WAIT_STOP;
}
}
// Check for stop
if (I2C_GetITStatus(handle->stm_handle, I2C_IT_STOPF) == SET) {
// Clear interrupt
I2C_ClearITPendingBit(handle->stm_handle, I2C_IT_STOPF);
// Notify
mal_i2c_result_e i2c_result = MAL_I2C_SUCCESS;
if (I2C_STATE_WAIT_STOP != handle->state) {
i2c_result = MAL_I2C_BUS_ERROR;
}
handle->msg->callback(handle->msg->handle, &handle->msg->packet, i2c_result, &handle->msg);
// Check if a new message can be started
if (handle->msg != NULL) {
i2c_start_transfer(handle);
} else {
handle->is_active = false;
}
}
}
static int pca954x_decode_address(I2CSlave *i2c, uint8_t address)
{
PCA954XState *s = PCA954X(i2c);
int i;
uint8_t channel_status = 0;
s->control_decoded = address ==
(PCA954X_CONTROL_ADDR | (s->chip_enable & 0x7));
if (s->control_decoded) {
return 0;
}
for (i = 0; i < s->lanes; ++i) {
if (s->active_lanes & (1 << i)) {
DB_PRINT("starting active bus %d addr:%02x rnw:%d\n", i, address,
s->event == I2C_START_RECV);
channel_status |= (i2c_start_transfer(s->busses[i], address,
s->event == I2C_START_RECV)) << i;
}
}
if (s->active_lanes == channel_status) {
return 1;
}
return 0;
}
/*
* The state machine needs some refinement. It is only used to track
* invalid STOP commands for the moment.
*/
static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value)
{
bus->cmd &= ~0xFFFF;
bus->cmd |= value & 0xFFFF;
if (bus->cmd & I2CD_M_START_CMD) {
uint8_t state = aspeed_i2c_get_state(bus) & I2CD_MACTIVE ?
I2CD_MSTARTR : I2CD_MSTART;
aspeed_i2c_set_state(bus, state);
if (i2c_start_transfer(bus->bus, extract32(bus->buf, 1, 7),
extract32(bus->buf, 0, 1))) {
bus->intr_status |= I2CD_INTR_TX_NAK;
} else {
bus->intr_status |= I2CD_INTR_TX_ACK;
}
/* START command is also a TX command, as the slave address is
* sent on the bus */
bus->cmd &= ~(I2CD_M_START_CMD | I2CD_M_TX_CMD);
/* No slave found */
if (!i2c_bus_busy(bus->bus)) {
return;
}
aspeed_i2c_set_state(bus, I2CD_MACTIVE);
}
if (bus->cmd & I2CD_M_TX_CMD) {
aspeed_i2c_set_state(bus, I2CD_MTXD);
if (i2c_send(bus->bus, bus->buf)) {
bus->intr_status |= (I2CD_INTR_TX_NAK);
i2c_end_transfer(bus->bus);
} else {
bus->intr_status |= I2CD_INTR_TX_ACK;
}
bus->cmd &= ~I2CD_M_TX_CMD;
aspeed_i2c_set_state(bus, I2CD_MACTIVE);
}
if ((bus->cmd & (I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST)) &&
!(bus->intr_status & I2CD_INTR_RX_DONE)) {
aspeed_i2c_handle_rx_cmd(bus);
}
if (bus->cmd & I2CD_M_STOP_CMD) {
if (!(aspeed_i2c_get_state(bus) & I2CD_MACTIVE)) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: abnormal stop\n", __func__);
bus->intr_status |= I2CD_INTR_ABNORMAL;
} else {
aspeed_i2c_set_state(bus, I2CD_MSTOP);
i2c_end_transfer(bus->bus);
bus->intr_status |= I2CD_INTR_NORMAL_STOP;
}
bus->cmd &= ~I2CD_M_STOP_CMD;
aspeed_i2c_set_state(bus, I2CD_IDLE);
}
}
int smbus_read_block(i2c_bus *bus, int addr, uint8_t command, uint8_t *data)
{
int len;
int i;
i2c_start_transfer(bus, addr, 0);
i2c_send(bus, command);
i2c_start_transfer(bus, addr, 1);
len = i2c_recv(bus);
if (len > 32)
len = 0;
for (i = 0; i < len; i++)
data[i] = i2c_recv(bus);
i2c_nack(bus);
i2c_end_transfer(bus);
return len;
}
void smbus_write_word(i2c_bus *bus, int addr, uint8_t command, uint16_t data)
{
i2c_start_transfer(bus, addr, 0);
i2c_send(bus, command);
i2c_send(bus, data & 0xff);
i2c_send(bus, data >> 8);
i2c_end_transfer(bus);
}
uint8_t smbus_receive_byte(i2c_bus *bus, int addr)
{
uint8_t data;
i2c_start_transfer(bus, addr, 1);
data = i2c_recv(bus);
i2c_nack(bus);
i2c_end_transfer(bus);
return data;
}
mal_error_e mal_i2c_transfer(mal_i2c_s *handle, mal_i2c_msg_s *msg) {
// Make sure I2C is free
if (handle->is_active) {
return MAL_ERROR_HARDWARE_UNAVAILABLE;
}
handle->is_active = true;
// Save msg
handle->msg = msg;
i2c_start_transfer(handle);
return MAL_ERROR_OK;
}
void smbus_write_block(i2c_bus *bus, int addr, uint8_t command, uint8_t *data,
int len)
{
int i;
if (len > 32)
len = 32;
i2c_start_transfer(bus, addr, 0);
i2c_send(bus, command);
i2c_send(bus, len);
for (i = 0; i < len; i++)
i2c_send(bus, data[i]);
i2c_end_transfer(bus);
}
void smbus_send_byte(i2c_bus *bus, int addr, uint8_t data)
{
i2c_start_transfer(bus, addr, 0);
i2c_send(bus, data);
i2c_end_transfer(bus);
}
/* Master device commands. */
void smbus_quick_command(I2CBus *bus, uint8_t addr, int read)
{
i2c_start_transfer(bus, addr, read);
i2c_end_transfer(bus);
}
static void i2c_state_update(i2c_interface *i2c, int data, int clock)
{
if (!i2c)
return;
switch (i2c->state) {
case STOPPED:
if (data == 0 && i2c->last_data == 1 && clock == 1)
i2c->state = INITIALIZING;
break;
case INITIALIZING:
if (clock == 0 && i2c->last_clock == 1 && data == 0)
i2c->state = SENDING_BIT7;
else
i2c_enter_stop(i2c);
break;
case SENDING_BIT7 ... SENDING_BIT0:
if (clock == 0 && i2c->last_clock == 1) {
i2c->buffer = (i2c->buffer << 1) | data;
i2c->state++; /* will end up in WAITING_FOR_ACK */
} else if (data == 1 && i2c->last_data == 0 && clock == 1)
i2c_enter_stop(i2c);
break;
case WAITING_FOR_ACK:
if (clock == 0 && i2c->last_clock == 1) {
if (i2c->current_addr < 0) {
i2c->current_addr = i2c->buffer;
i2c_start_transfer(i2c->bus, i2c->current_addr & 0xfe,
i2c->buffer & 1);
} else
i2c_send(i2c->bus, i2c->buffer);
if (i2c->current_addr & 1) {
i2c->state = RECEIVING_BIT7;
i2c->buffer = i2c_recv(i2c->bus);
} else
i2c->state = SENDING_BIT7;
} else if (data == 1 && i2c->last_data == 0 && clock == 1)
i2c_enter_stop(i2c);
break;
case RECEIVING_BIT7 ... RECEIVING_BIT0:
if (clock == 0 && i2c->last_clock == 1) {
i2c->state++; /* will end up in SENDING_ACK */
i2c->buffer <<= 1;
} else if (data == 1 && i2c->last_data == 0 && clock == 1)
i2c_enter_stop(i2c);
break;
case SENDING_ACK:
if (clock == 0 && i2c->last_clock == 1) {
i2c->state = RECEIVING_BIT7;
if (data == 0)
i2c->buffer = i2c_recv(i2c->bus);
else
i2c_nack(i2c->bus);
} else if (data == 1 && i2c->last_data == 0 && clock == 1)
i2c_enter_stop(i2c);
break;
}
i2c->last_data = data;
i2c->last_clock = clock;
}
static void imx_i2c_write(void *opaque, hwaddr offset,
uint64_t value, unsigned size)
{
IMXI2CState *s = IMX_I2C(opaque);
DPRINTF("write %s [0x%" HWADDR_PRIx "] <- 0x%02x\n",
imx_i2c_get_regname(offset), offset, (int)value);
value &= 0xff;
switch (offset) {
case IADR_ADDR:
s->iadr = value & IADR_MASK;
/* i2c_set_slave_address(s->bus, (uint8_t)s->iadr); */
break;
case IFDR_ADDR:
s->ifdr = value & IFDR_MASK;
break;
case I2CR_ADDR:
if (imx_i2c_is_enabled(s) && ((value & I2CR_IEN) == 0)) {
/* This is a soft reset. IADR is preserved during soft resets */
uint16_t iadr = s->iadr;
imx_i2c_reset(DEVICE(s));
s->iadr = iadr;
} else { /* normal write */
s->i2cr = value & I2CR_MASK;
if (imx_i2c_is_master(s)) {
/* set the bus to busy */
s->i2sr |= I2SR_IBB;
} else { /* slave mode */
/* bus is not busy anymore */
s->i2sr &= ~I2SR_IBB;
/*
* if we unset the master mode then it ends the ongoing
* transfer if any
*/
if (s->address != ADDR_RESET) {
i2c_end_transfer(s->bus);
s->address = ADDR_RESET;
}
}
if (s->i2cr & I2CR_RSTA) { /* Restart */
/* if this is a restart then it ends the ongoing transfer */
if (s->address != ADDR_RESET) {
i2c_end_transfer(s->bus);
s->address = ADDR_RESET;
s->i2cr &= ~I2CR_RSTA;
}
}
}
break;
case I2SR_ADDR:
/*
* if the user writes 0 to IIF then lower the interrupt and
* reset the bit
*/
if ((s->i2sr & I2SR_IIF) && !(value & I2SR_IIF)) {
s->i2sr &= ~I2SR_IIF;
qemu_irq_lower(s->irq);
}
/*
* if the user writes 0 to IAL, reset the bit
*/
if ((s->i2sr & I2SR_IAL) && !(value & I2SR_IAL)) {
s->i2sr &= ~I2SR_IAL;
}
break;
case I2DR_ADDR:
/* if the device is not enabled, nothing to do */
if (!imx_i2c_is_enabled(s)) {
break;
}
s->i2dr_write = value & I2DR_MASK;
if (imx_i2c_is_master(s)) {
/* If this is the first write cycle then it is the slave addr */
if (s->address == ADDR_RESET) {
if (i2c_start_transfer(s->bus, extract32(s->i2dr_write, 1, 7),
extract32(s->i2dr_write, 0, 1))) {
/* if non zero is returned, the adress is not valid */
s->i2sr |= I2SR_RXAK;
} else {
s->address = s->i2dr_write;
s->i2sr &= ~I2SR_RXAK;
imx_i2c_raise_interrupt(s);
}
} else { /* This is a normal data write */
if (i2c_send(s->bus, s->i2dr_write)) {
/* if the target return non zero then end the transfer */
s->i2sr |= I2SR_RXAK;
s->address = ADDR_RESET;
i2c_end_transfer(s->bus);
} else {
s->i2sr &= ~I2SR_RXAK;
imx_i2c_raise_interrupt(s);
}
}
} else {
qemu_log_mask(LOG_UNIMP, "[%s]%s: slave mode not implemented\n",
TYPE_IMX_I2C, __func__);
}
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad address at offset 0x%"
HWADDR_PRIx "\n", TYPE_IMX_I2C, __func__, offset);
break;
}
}
AUXReply aux_request(AUXBus *bus, AUXCommand cmd, uint32_t address,
uint8_t len, uint8_t *data)
{
AUXReply ret = AUX_NACK;
I2CBus *i2c_bus = aux_get_i2c_bus(bus);
size_t i;
bool is_write = false;
DPRINTF("request at address 0x%" PRIX32 ", command %u, len %u\n", address,
cmd, len);
switch (cmd) {
/*
* Forward the request on the AUX bus..
*/
case WRITE_AUX:
case READ_AUX:
is_write = cmd == READ_AUX ? false : true;
for (i = 0; i < len; i++) {
if (!address_space_rw(&bus->aux_addr_space, address++,
MEMTXATTRS_UNSPECIFIED, data++, 1,
is_write)) {
ret = AUX_I2C_ACK;
} else {
ret = AUX_NACK;
break;
}
}
break;
/*
* Classic I2C transactions..
*/
case READ_I2C:
case WRITE_I2C:
is_write = cmd == READ_I2C ? false : true;
if (i2c_bus_busy(i2c_bus)) {
i2c_end_transfer(i2c_bus);
}
if (i2c_start_transfer(i2c_bus, address, is_write)) {
ret = AUX_I2C_NACK;
break;
}
ret = AUX_I2C_ACK;
while (len > 0) {
if (i2c_send_recv(i2c_bus, data++, is_write) < 0) {
ret = AUX_I2C_NACK;
break;
}
len--;
}
i2c_end_transfer(i2c_bus);
break;
/*
* I2C MOT transactions.
*
* Here we send a start when:
* - We didn't start transaction yet.
* - We had a READ and we do a WRITE.
* - We changed the address.
*/
case WRITE_I2C_MOT:
case READ_I2C_MOT:
is_write = cmd == READ_I2C_MOT ? false : true;
ret = AUX_I2C_NACK;
if (!i2c_bus_busy(i2c_bus)) {
/*
* No transactions started..
*/
if (i2c_start_transfer(i2c_bus, address, is_write)) {
break;
}
} else if ((address != bus->last_i2c_address) ||
(bus->last_transaction != cmd)) {
/*
* Transaction started but we need to restart..
*/
i2c_end_transfer(i2c_bus);
if (i2c_start_transfer(i2c_bus, address, is_write)) {
break;
}
}
bus->last_transaction = cmd;
bus->last_i2c_address = address;
while (len > 0) {
if (i2c_send_recv(i2c_bus, data++, is_write) < 0) {
i2c_end_transfer(i2c_bus);
break;
}
len--;
}
if (len == 0) {
ret = AUX_I2C_ACK;
}
break;
default:
DPRINTF("Not implemented!\n");
return AUX_NACK;
}
DPRINTF("reply: %u\n", ret);
return ret;
}
/* Master device commands. */
void smbus_quick_command(i2c_bus *bus, int addr, int read)
{
i2c_start_transfer(bus, addr, read);
i2c_end_transfer(bus);
}
