/**
* \brief Initialize the LCD.
*/
static void gfx_init(void)
{
struct ili93xx_opt_t g_ili93xx_display_opt;
/* Enable peripheral clock. */
pmc_enable_periph_clk(ID_SMC);
/* Configure SMC interface for LCD. */
smc_set_setup_timing(SMC,ILI93XX_LCD_CS,SMC_SETUP_NWE_SETUP(2)
| SMC_SETUP_NCS_WR_SETUP(2)
| SMC_SETUP_NRD_SETUP(2)
| SMC_SETUP_NCS_RD_SETUP(2));
smc_set_pulse_timing(SMC, ILI93XX_LCD_CS , SMC_PULSE_NWE_PULSE(4)
| SMC_PULSE_NCS_WR_PULSE(4)
| SMC_PULSE_NRD_PULSE(10)
| SMC_PULSE_NCS_RD_PULSE(10));
smc_set_cycle_timing(SMC, ILI93XX_LCD_CS, SMC_CYCLE_NWE_CYCLE(10)
| SMC_CYCLE_NRD_CYCLE(22));
smc_set_mode(SMC, ILI93XX_LCD_CS, SMC_MODE_READ_MODE
| SMC_MODE_WRITE_MODE);
/* Initialize display parameter. */
g_ili93xx_display_opt.ul_width = ILI93XX_LCD_WIDTH;
g_ili93xx_display_opt.ul_height = ILI93XX_LCD_HEIGHT;
g_ili93xx_display_opt.foreground_color = COLOR_WHITE;
g_ili93xx_display_opt.background_color = COLOR_WHITE;
/* Initialize LCD. */
if (1 == ili93xx_init(&g_ili93xx_display_opt)) {
while(1);
}
}
void configure_LCD(){
/** Enable peripheral clock */
pmc_enable_periph_clk(ID_SMC);
/** Configure SMC interface for Lcd */
smc_set_setup_timing(SMC, ILI93XX_LCD_CS, SMC_SETUP_NWE_SETUP(2)
| SMC_SETUP_NCS_WR_SETUP(2)
| SMC_SETUP_NRD_SETUP(2)
| SMC_SETUP_NCS_RD_SETUP(2));
smc_set_pulse_timing(SMC, ILI93XX_LCD_CS, SMC_PULSE_NWE_PULSE(4)
| SMC_PULSE_NCS_WR_PULSE(4)
| SMC_PULSE_NRD_PULSE(10)
| SMC_PULSE_NCS_RD_PULSE(10));
smc_set_cycle_timing(SMC, ILI93XX_LCD_CS, SMC_CYCLE_NWE_CYCLE(10)
| SMC_CYCLE_NRD_CYCLE(22));
#if ((!defined(SAM4S)) && (!defined(SAM4E)))
smc_set_mode(SMC, ILI93XX_LCD_CS, SMC_MODE_READ_MODE
| SMC_MODE_WRITE_MODE
| SMC_MODE_DBW_8_BIT);
#else
smc_set_mode(SMC, ILI93XX_LCD_CS, SMC_MODE_READ_MODE
| SMC_MODE_WRITE_MODE);
#endif
/** Initialize display parameter */
g_ili93xx_display_opt.ul_width = ILI93XX_LCD_WIDTH;
g_ili93xx_display_opt.ul_height = ILI93XX_LCD_HEIGHT;
g_ili93xx_display_opt.foreground_color = COLOR_BLACK;
g_ili93xx_display_opt.background_color = COLOR_WHITE;
/** Switch off backlight */
aat31xx_disable_backlight();
/** Initialize LCD */
ili93xx_init(&g_ili93xx_display_opt);
/** Set backlight level */
aat31xx_set_backlight(AAT31XX_AVG_BACKLIGHT_LEVEL);
ili93xx_set_foreground_color(COLOR_WHITE);
ili93xx_draw_filled_rectangle(0, 0, ILI93XX_LCD_WIDTH,
ILI93XX_LCD_HEIGHT);
/** Turn on LCD */
ili93xx_display_on();
ili93xx_set_cursor_position(0, 0);
ili93xx_set_foreground_color(COLOR_BLACK);
ili93xx_draw_circle(120, 160, 40);
ili93xx_draw_line(120, 160, 60, 160);
ili93xx_draw_line(120, 160, 120, 100);
ili93xx_draw_line(120, 160, 180, 160);
}
/**
* \brief Application entry point for smc_lcd example.
*
* \return Unused (ANSI-C compatibility).
*/
int main(void)
{
sysclk_init();
board_init();
/** Initialize debug console */
configure_console();
/** Enable peripheral clock */
pmc_enable_periph_clk(ID_SMC);
/** Configure SMC interface for Lcd */
smc_set_setup_timing(SMC, ILI93XX_LCD_CS, SMC_SETUP_NWE_SETUP(2)
| SMC_SETUP_NCS_WR_SETUP(2)
| SMC_SETUP_NRD_SETUP(2)
| SMC_SETUP_NCS_RD_SETUP(2));
smc_set_pulse_timing(SMC, ILI93XX_LCD_CS, SMC_PULSE_NWE_PULSE(4)
| SMC_PULSE_NCS_WR_PULSE(4)
| SMC_PULSE_NRD_PULSE(10)
| SMC_PULSE_NCS_RD_PULSE(10));
smc_set_cycle_timing(SMC, ILI93XX_LCD_CS, SMC_CYCLE_NWE_CYCLE(10)
| SMC_CYCLE_NRD_CYCLE(22));
#if ((!defined(SAM4S)) && (!defined(SAM4E)))
smc_set_mode(SMC, ILI93XX_LCD_CS, SMC_MODE_READ_MODE
| SMC_MODE_WRITE_MODE
| SMC_MODE_DBW_8_BIT);
#else
smc_set_mode(SMC, ILI93XX_LCD_CS, SMC_MODE_READ_MODE
| SMC_MODE_WRITE_MODE);
#endif
/** Initialize display parameter */
g_ili93xx_display_opt.ul_width = ILI93XX_LCD_WIDTH;
g_ili93xx_display_opt.ul_height = ILI93XX_LCD_HEIGHT;
g_ili93xx_display_opt.foreground_color = COLOR_BLACK;
g_ili93xx_display_opt.background_color = COLOR_WHITE;
/** Switch off backlight */
aat31xx_disable_backlight();
/** Initialize LCD */
ili93xx_init(&g_ili93xx_display_opt);
/** Set backlight level */
aat31xx_set_backlight(AAT31XX_AVG_BACKLIGHT_LEVEL);
ili93xx_set_foreground_color(COLOR_WHITE);
ili93xx_draw_filled_rectangle(0, 0, ILI93XX_LCD_WIDTH,
ILI93XX_LCD_HEIGHT);
/** Turn on LCD */
ili93xx_display_on();
ili93xx_set_cursor_position(0, 0);
/** Draw text, image and basic shapes on the LCD */
ili93xx_set_foreground_color(COLOR_BLACK);
ili93xx_draw_string(10, 20, (uint8_t *)"ili93xx_lcd example");
ili93xx_set_foreground_color(COLOR_RED);
ili93xx_draw_circle(60, 160, 40);
ili93xx_set_foreground_color(COLOR_GREEN);
ili93xx_draw_circle(120, 160, 40);
ili93xx_set_foreground_color(COLOR_BLUE);
ili93xx_draw_circle(180, 160, 40);
ili93xx_set_foreground_color(COLOR_VIOLET);
ili93xx_draw_line(0, 0, 240, 320);
while (1) {
}
}
*/
int main(void)
{
sysclk_init();
board_init();
/** Initialize debug console */
configure_console();
/** Configura o timer */
configure_tc();
/* Configura os botões */
configure_buttons();
/** Enable peripheral clock */
pmc_enable_periph_clk(ID_SMC);
/** Configure SMC interface for Lcd */
smc_set_setup_timing(SMC, ILI93XX_LCD_CS, SMC_SETUP_NWE_SETUP(2)
| SMC_SETUP_NCS_WR_SETUP(2)
| SMC_SETUP_NRD_SETUP(2)
| SMC_SETUP_NCS_RD_SETUP(2));
smc_set_pulse_timing(SMC, ILI93XX_LCD_CS, SMC_PULSE_NWE_PULSE(4)
| SMC_PULSE_NCS_WR_PULSE(4)
| SMC_PULSE_NRD_PULSE(10)
| SMC_PULSE_NCS_RD_PULSE(10));
smc_set_cycle_timing(SMC, ILI93XX_LCD_CS, SMC_CYCLE_NWE_CYCLE(10)
| SMC_CYCLE_NRD_CYCLE(22));
#if ((!defined(SAM4S)) && (!defined(SAM4E)))
smc_set_mode(SMC, ILI93XX_LCD_CS, SMC_MODE_READ_MODE
| SMC_MODE_WRITE_MODE
| SMC_MODE_DBW_8_BIT);
#else
smc_set_mode(SMC, ILI93XX_LCD_CS, SMC_MODE_READ_MODE
| SMC_MODE_WRITE_MODE);
#endif
/** Initialize display parameter */
g_ili93xx_display_opt.ul_width = ILI93XX_LCD_WIDTH;
g_ili93xx_display_opt.ul_height = ILI93XX_LCD_HEIGHT;
g_ili93xx_display_opt.foreground_color = COLOR_BLACK;
g_ili93xx_display_opt.background_color = COLOR_WHITE;
/** Switch off backlight */
aat31xx_disable_backlight();
/** Initialize LCD */
ili93xx_init(&g_ili93xx_display_opt);
/** Set backlight level */
aat31xx_set_backlight(AAT31XX_AVG_BACKLIGHT_LEVEL);
ili93xx_set_foreground_color(COLOR_WHITE);
ili93xx_draw_filled_rectangle(0, 0, ILI93XX_LCD_WIDTH,
ILI93XX_LCD_HEIGHT);
/** Turn on LCD */
ili93xx_display_on();
ili93xx_set_cursor_position(0, 0);
/** Draw text, image and basic shapes on the LCD */
ili93xx_set_foreground_color(COLOR_BLACK);
ili93xx_draw_string(80, 10, (uint8_t *)"13 - LCD");
ili93xx_draw_string(10, 40, (uint8_t *)"Andre");
ili93xx_draw_string(10, 60, (uint8_t *)"Thales");
ili93xx_draw_string(10, 80, (uint8_t *)"Tete");
ili93xx_set_foreground_color(COLOR_ORANGE);
ili93xx_draw_filled_rectangle(0, 100, ILI93XX_LCD_WIDTH,105);
ili93xx_set_foreground_color(COLOR_GREEN);
ili93xx_draw_filled_rectangle(0, 106, ILI93XX_LCD_WIDTH,111);
while (1) {
/* Entra em modo sleep */
pmc_sleep(SAM_PM_SMODE_SLEEP_WFI);
}
/**
* \brief Application entry point for smc_lcd example.
*
* \return Unused (ANSI-C compatibility).
*/
int main(void)
{
sysclk_init();
board_init();
/** Configura os botões, o TC e desabilita o Watchdog Timer. */
configure_buttons();
WDT->WDT_MR = WDT_MR_WDDIS;
configure_tc();
/** Initialize debug console */
configure_console();
/** Enable peripheral clock */
pmc_enable_periph_clk(ID_SMC);
/** Configure SMC interface for Lcd */
smc_set_setup_timing(SMC, ILI93XX_LCD_CS, SMC_SETUP_NWE_SETUP(2)
| SMC_SETUP_NCS_WR_SETUP(2)
| SMC_SETUP_NRD_SETUP(2)
| SMC_SETUP_NCS_RD_SETUP(2));
smc_set_pulse_timing(SMC, ILI93XX_LCD_CS, SMC_PULSE_NWE_PULSE(4)
| SMC_PULSE_NCS_WR_PULSE(4)
| SMC_PULSE_NRD_PULSE(10)
| SMC_PULSE_NCS_RD_PULSE(10));
smc_set_cycle_timing(SMC, ILI93XX_LCD_CS, SMC_CYCLE_NWE_CYCLE(10)
| SMC_CYCLE_NRD_CYCLE(22));
#if ((!defined(SAM4S)) && (!defined(SAM4E)))
smc_set_mode(SMC, ILI93XX_LCD_CS, SMC_MODE_READ_MODE
| SMC_MODE_WRITE_MODE
| SMC_MODE_DBW_8_BIT);
#else
smc_set_mode(SMC, ILI93XX_LCD_CS, SMC_MODE_READ_MODE
| SMC_MODE_WRITE_MODE);
#endif
/** Initialize display parameter */
g_ili93xx_display_opt.ul_width = ILI93XX_LCD_WIDTH;
g_ili93xx_display_opt.ul_height = ILI93XX_LCD_HEIGHT;
g_ili93xx_display_opt.foreground_color = COLOR_BLACK;
g_ili93xx_display_opt.background_color = COLOR_WHITE;
/** Switch off backlight */
aat31xx_disable_backlight();
/** Initialize LCD */
ili93xx_init(&g_ili93xx_display_opt);
/** Set backlight level */
aat31xx_set_backlight(AAT31XX_AVG_BACKLIGHT_LEVEL);
ili93xx_set_foreground_color(COLOR_WHITE);
ili93xx_draw_filled_rectangle(0, 0, ILI93XX_LCD_WIDTH,
ILI93XX_LCD_HEIGHT);
/** Turn on LCD */
ili93xx_display_on();
ili93xx_set_cursor_position(0, 0);
/** Escreve os nomes no display. */
ili93xx_set_foreground_color(COLOR_BLACK);
ili93xx_draw_string(10, 20, (uint8_t *)"Bruna Tavares");
ili93xx_draw_string(10, 40, (uint8_t *)"Bruno Campos");
ili93xx_draw_string(10, 60, (uint8_t *)"Keneth Yamada");
/** Desenha linha */
ili93xx_set_foreground_color(COLOR_BLUEVIOLET);
ili93xx_draw_line(0, 90, 240, 90);
/** Escreve contador e tempo no display. */
ili93xx_set_foreground_color(COLOR_BLACK);
ili93xx_draw_string(10, 110, (uint8_t *)"Contador");
ili93xx_draw_string(10, 300, (uint8_t *)"Tempo ");
/** Escreve valores iniciais do contador. */
ili93xx_draw_string(130, 110, (uint8_t *)"000");
ili93xx_draw_string(140, 300, (uint8_t *)"00:00");
while (1) {
// Coloca o microcontrolador em modo Sleep aguardando interrupções.
pmc_sleep(SAM_PM_SMODE_SLEEP_WFI);
}
}
