void __init eukrea_mbimxsd25_baseboard_init(void)
{
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
ARRAY_SIZE(eukrea_mbimxsd_pads)))
printk(KERN_ERR "error setting mbimxsd pads !\n");
imx25_add_imx_uart1(&uart_pdata);
imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
imx25_add_flexcan1(NULL);
imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
gpio_request(GPIO_LED1, "LED1");
gpio_direction_output(GPIO_LED1, 1);
gpio_free(GPIO_LED1);
gpio_request(GPIO_SWITCH1, "SWITCH1");
gpio_direction_input(GPIO_SWITCH1);
gpio_free(GPIO_SWITCH1);
gpio_request(GPIO_LCDPWR, "LCDPWR");
gpio_direction_output(GPIO_LCDPWR, 1);
gpio_free(GPIO_SWITCH1);
i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
}
static void __init armadillo_box_ws1_init(void)
{
const struct physmap_flash_data *data;
imx25_soc_init();
imx25_add_imx_pinctrl("imx25-pinctrl");
pinctrl_register_mappings(armadillo_box_ws1_pinctrl_map,
ARRAY_SIZE(armadillo_box_ws1_pinctrl_map));
imx25_add_imx_uart1(&uart1_pdata);
imx25_add_imx_uart2(&uart2_pdata);
imx25_add_usbmisc_imx();
imx25_add_usb_phy_gen_xceiv_otg();
imx25_add_usb_phy_gen_xceiv_hs();
imx25_add_imx_usb_otg(&otg_pdata);
imx25_add_imx_usb_hs(&usbh2_pdata);
imx25_add_imx2_wdt();
if (machine_is_armadillo420())
data = &armadillo_box_ws1_nor_flash_pdata_16m;
else
data = &armadillo_box_ws1_nor_flash_pdata_32m;
platform_device_register_resndata(NULL, "physmap-flash", -1,
&armadillo_box_ws1_nor_flash_resource, 1,
data, sizeof(*data));
imx25_named_gpio_init();
armadillo_box_ws1_fec_reset();
imx25_add_fec(&mx25_fec_pdata);
armadillo_box_ws1_bp35a1_init();
imx25_add_imx_i2c0(&mx25_i2c0_data);
imx25_add_imx_i2c1(&mx25_i2c1_data);
i2c_register_board_info(1, armadillo_box_ws1_i2c1,
ARRAY_SIZE(armadillo_box_ws1_i2c1));
platform_device_register_data(NULL, "reg-fixed-voltage", 1,
&armadillo_box_ws1_esdhc1_regulator_config,
sizeof(armadillo_box_ws1_esdhc1_regulator_config));
platform_device_register_data(NULL, "reg-fixed-voltage", 2,
&armadillo_box_ws1_usb_regulator_config,
sizeof(armadillo_box_ws1_usb_regulator_config));
imx25_add_sdhci_esdhc_imx(0, &armadillo_box_ws1_esdhc1_pdata);
imx_add_gpio_keys(&armadillo_box_ws1_gpio_key_data);
gpio_led_register_device(-1, &armadillo_box_ws1_led_data);
}
/*
* system init for baseboard usage. Will be called by cpuimx25 init.
*
* Add platform devices present on this baseboard and init
* them from CPU side as far as required to use them later on
*/
void __init eukrea_mbimxsd25_baseboard_init(void)
{
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
ARRAY_SIZE(eukrea_mbimxsd_pads)))
printk(KERN_ERR "error setting mbimxsd pads !\n");
#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
/* SSI unit master I2S codec connected to SSI_AUD5*/
mxc_audmux_v2_configure_port(0,
MXC_AUDMUX_V2_PTCR_SYN |
MXC_AUDMUX_V2_PTCR_TFSDIR |
MXC_AUDMUX_V2_PTCR_TFSEL(4) |
MXC_AUDMUX_V2_PTCR_TCLKDIR |
MXC_AUDMUX_V2_PTCR_TCSEL(4),
MXC_AUDMUX_V2_PDCR_RXDSEL(4)
);
mxc_audmux_v2_configure_port(4,
MXC_AUDMUX_V2_PTCR_SYN,
MXC_AUDMUX_V2_PDCR_RXDSEL(0)
);
#endif
imx25_add_imx_uart1(&uart_pdata);
imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
imx25_add_flexcan1(NULL);
imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
gpio_request(GPIO_LED1, "LED1");
gpio_direction_output(GPIO_LED1, 1);
gpio_free(GPIO_LED1);
gpio_request(GPIO_SWITCH1, "SWITCH1");
gpio_direction_input(GPIO_SWITCH1);
gpio_free(GPIO_SWITCH1);
gpio_request(GPIO_LCDPWR, "LCDPWR");
gpio_direction_output(GPIO_LCDPWR, 1);
gpio_free(GPIO_SWITCH1);
i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
}