void
hasp_mpc5xxx_i2c_init()
{
initReset(); // initialise the reset pin
resetHigh();
cyg_drv_mutex_init(&i2c_lock);
cyg_drv_cond_init(&i2c_wait, &i2c_lock);
cyg_drv_interrupt_create(i2c_intr_vector,
0,
(cyg_addrword_t) 0,
&mpc5xxx_i2c_isr,
&mpc5xxx_i2c_dsr,
&(i2c_interrupt_handle),
&(i2c_interrupt_data));
cyg_drv_interrupt_attach(i2c_interrupt_handle);
HAL_WRITE_UINT32(I2C_0_FDR_REG, 0x89000000); // Set clock to 100MHz / 352
HAL_WRITE_UINT32(I2C_0_ADDRESS_REG, 0x00000000); // Set MPC5xxx slave address, not useful to us
HAL_WRITE_UINT32(I2C_0_CONTROL_REG, I2C_ENABLE); // Enable the I2C device but do not start any transfers and leave interrupts disabled.
HAL_WRITE_UINT32(I2C_0_STATUS_REG, 0x00000000); // Clear any pending conditions including interrupts.
HAL_INTERRUPT_UNMASK(i2c_intr_vector); // Interrupts can now be safely unmasked
i2c_flag = 0;
resetLow();
}
void main(void)
{
initd();
LED1 = 0;
LED2 = 0;
initIdle();
initTimers();
while (1)
{
readInputs();
if(timerflag)
{
bcount ++;
if(bcount >= blinkspeed)
{
if(blink == 0) blink = 1; else blink = 0;
LED1 = blink;
bcount = 0;
}
if(scount <= 1) { scount ++; LED2 = 0; }
else LED2 = 1;
sendcount ++;
if(serial0_null <= 4) serial0_null ++;
else u0 = 0;
if(wakecheck > 0) wakecheck --;
else initReset();
timerflag = 0;
}
if(sendcount >= 25)
{
if(tied.onoff)
{
sendLcdChar(kmh);
sendLcdChar(rpm);
sendLcdChar(20);
sendLcdChar(20);
sendLcdChar(1);
sendLcdChar(1);
sendLcdChar(matka>>8);
sendLcdChar(matka);
sendcount = 0;
matka = 0;
}
}
}
void syncAset(void)
{
reset = u_lcd_string[0];
tied.onoff = u_lcd_string[1];
tied.rele1 = u_lcd_string[2];
tied.rele2 = u_lcd_string[3];
ring = u_lcd_string[4];
ring = (ring<<8) + u_lcd_string[5];
if(reset) initReset();
}
