static struct md_container *init_db_attrs(URL_TYPE type) {
struct md_container *mdc = NULL;
if (conf->db_attrs) {
switch (type) {
case url_stdout:
case url_stderr:
case url_fd:
case url_file:
#ifdef WITH_CURL
case url_http:
case url_https:
case url_ftp:
#endif /* WITH CURL */
mdc = malloc(sizeof(struct md_container)); /* freed in close_db_attrs */
mdc->todo_attr = conf->db_attrs;
init_md(mdc);
break;
#ifdef WITH_PSQL
case url_sql:
break;
#endif /* WITH_PSQL */
default :
error(200,_("init_db_attrs(): Unknown url type.\n"));
}
}
return mdc;
}
int16_t main(void) {
init_clock();
init_timer();
init_ui();
init_pin();
init_spi();
init_oc();
init_md();
// Current measurement pin
pin_analogIn(&A[0]);
// SPI pin setup
ENC_MISO = &D[1];
ENC_MOSI = &D[0];
ENC_SCK = &D[2];
ENC_NCS = &D[3];
pin_digitalOut(ENC_NCS);
pin_set(ENC_NCS);
// Open SPI in mode 1
spi_open(&spi1, ENC_MISO, ENC_MOSI, ENC_SCK, 2e6, 1);
// Motor setup
md_velocity(&md1, 0, 0);
// Get initial angle offset
uint8_t unset = 1;
while (unset) {
ANG_OFFSET = enc_readReg((WORD) REG_ANG_ADDR);
unset = parity(ANG_OFFSET.w);
}
ANG_OFFSET.w &= ENC_MASK;
// USB setup
InitUSB();
while (USB_USWSTAT!=CONFIG_STATE) {
ServiceUSB();
}
// Timers
timer_setFreq(&timer2, READ_FREQ);
timer_setFreq(&timer3, CTRL_FREQ);
timer_start(&timer2);
timer_start(&timer3);
// Main loop
while (1) {
ServiceUSB();
if (timer_flag(&timer2)) {
timer_lower(&timer2);
get_readings();
}
if (timer_flag(&timer3)) {
timer_lower(&timer3);
set_velocity();
}
}
}
int16_t main(void) {
init_clock();
init_ui();
init_pin();
init_spi();
init_timer();
init_oc();
init_md();
led_off(&led2);
led_off(&led3);
ENC_MISO = &D[1];
ENC_MOSI = &D[0];
ENC_SCK = &D[2];
ENC_NCS = &D[3];
read_angle.w=0x3FFF;
Pscale.w=1;
Iscale.w=0;
direction.w=1;
speed.w=0;
angle_now.i=180;
angle_prev.i=180;
angle.w=10;
uint8_t loop = 0;
pin_digitalOut(ENC_NCS);
pin_set(ENC_NCS);
spi_open(&spi1, ENC_MISO, ENC_MOSI, ENC_SCK, 2e8,1);
timer_setPeriod(&timer1, 0.05);
timer_start(&timer1);
InitUSB();
// initialize the USB registers and serial interface engine
while (USB_USWSTAT!=CONFIG_STATE) { // while the peripheral is not configured...
ServiceUSB(); // ...service USB requests
}
while(1){
ServiceUSB();
if (timer_flag(&timer1)) {
timer_lower(&timer1);
angle_prev=angle_now;
angle_prev_con=angle; // service any pending USB requests
angle_now = enc_readReg(read_angle);
angle_now = mask_angle(angle_now);
angle=convert_Angle(angle_prev,angle_now,&loop);
spring_simple(angle);
}
}
}
int16_t main(void) {
init_clock();
init_ui();
init_pin();
init_timer();
init_oc();
init_spi();
init_enc();
init_md();
init_motor();
// (&motor1)->vel_set = 360.0;
InitUSB();
while (USB_USWSTAT!=CONFIG_STATE) {
ServiceUSB();
}
while (1) {
ServiceUSB();
}
}
int16_t main(void) {
init_clock();
init_ui();
init_timer();
init_pin();
init_oc();
init_md();
led_on(&led2);
led_on(&led3);
timer_setPeriod(&timer1, 0.5);
timer_start(&timer1);
while (1) {
if (timer_flag(&timer1)) {
timer_lower(&timer1);
if (speed > 24000) {
up=0;
}
if (speed < 12000) {
up=1;
}
if (up) {
speed=speed+300;
}
if (!up) {
speed=speed-300;
}
// direction = !direction;
md_speed(&mdp, speed);
md_direction(&mdp, direction);
}
}
}
int16_t main(void) {
init_clock();
init_timer();
init_pin();
init_oc();
init_md();
pin_analogIn(&A[0]);
md_velocity(&md1, 0xF000, 1);
InitUSB(); // initialize the USB registers and serial interface engine
while (USB_USWSTAT!=CONFIG_STATE) { // while the peripheral is not configured...
LAST_CURRENT = CURRENT_CURRENT;
CURRENT_CURRENT.w = pin_read(&A[0]);
ServiceUSB(); // ...service USB requests
}
while (1) {
LAST_CURRENT = CURRENT_CURRENT;
CURRENT_CURRENT.w = pin_read(&A[0]);
ServiceUSB(); // service any pending USB requests
}
}
double do_md_openmm(FILE *fplog,t_commrec *cr,int nfile,const t_filenm fnm[],
const output_env_t oenv, gmx_bool bVerbose,gmx_bool bCompact,
int nstglobalcomm,
gmx_vsite_t *vsite,gmx_constr_t constr,
int stepout,t_inputrec *ir,
gmx_mtop_t *top_global,
t_fcdata *fcd,
t_state *state_global,
t_mdatoms *mdatoms,
t_nrnb *nrnb,gmx_wallcycle_t wcycle,
gmx_edsam_t ed,t_forcerec *fr,
int repl_ex_nst,int repl_ex_seed,
real cpt_period,real max_hours,
const char *deviceOptions,
unsigned long Flags,
gmx_runtime_t *runtime)
{
gmx_mdoutf_t *outf;
gmx_large_int_t step,step_rel;
double run_time;
double t,t0,lam0;
gmx_bool bSimAnn,
bFirstStep,bStateFromTPX,bLastStep,bStartingFromCpt;
gmx_bool bInitStep=TRUE;
gmx_bool do_ene,do_log, do_verbose,
bX,bV,bF,bCPT;
tensor force_vir,shake_vir,total_vir,pres;
int i,m;
int mdof_flags;
rvec mu_tot;
t_vcm *vcm;
int nchkpt=1;
gmx_localtop_t *top;
t_mdebin *mdebin=NULL;
t_state *state=NULL;
rvec *f_global=NULL;
int n_xtc=-1;
rvec *x_xtc=NULL;
gmx_enerdata_t *enerd;
rvec *f=NULL;
gmx_global_stat_t gstat;
gmx_update_t upd=NULL;
t_graph *graph=NULL;
globsig_t gs;
gmx_groups_t *groups;
gmx_ekindata_t *ekind, *ekind_save;
gmx_bool bAppend;
int a0,a1;
matrix lastbox;
real reset_counters=0,reset_counters_now=0;
char sbuf[STEPSTRSIZE],sbuf2[STEPSTRSIZE];
int handled_stop_condition=gmx_stop_cond_none;
const char *ommOptions = NULL;
void *openmmData;
bAppend = (Flags & MD_APPENDFILES);
check_ir_old_tpx_versions(cr,fplog,ir,top_global);
groups = &top_global->groups;
/* Initial values */
init_md(fplog,cr,ir,oenv,&t,&t0,&state_global->lambda,&lam0,
nrnb,top_global,&upd,
nfile,fnm,&outf,&mdebin,
force_vir,shake_vir,mu_tot,&bSimAnn,&vcm,state_global,Flags);
clear_mat(total_vir);
clear_mat(pres);
/* Energy terms and groups */
snew(enerd,1);
init_enerdata(top_global->groups.grps[egcENER].nr,ir->n_flambda,enerd);
snew(f,top_global->natoms);
/* Kinetic energy data */
snew(ekind,1);
init_ekindata(fplog,top_global,&(ir->opts),ekind);
/* needed for iteration of constraints */
snew(ekind_save,1);
init_ekindata(fplog,top_global,&(ir->opts),ekind_save);
/* Copy the cos acceleration to the groups struct */
ekind->cosacc.cos_accel = ir->cos_accel;
gstat = global_stat_init(ir);
debug_gmx();
{
double io = compute_io(ir,top_global->natoms,groups,mdebin->ebin->nener,1);
if ((io > 2000) && MASTER(cr))
fprintf(stderr,
"\nWARNING: This run will generate roughly %.0f Mb of data\n\n",
io);
}
top = gmx_mtop_generate_local_top(top_global,ir);
a0 = 0;
a1 = top_global->natoms;
state = partdec_init_local_state(cr,state_global);
f_global = f;
atoms2md(top_global,ir,0,NULL,a0,a1-a0,mdatoms);
if (vsite)
{
set_vsite_top(vsite,top,mdatoms,cr);
}
if (ir->ePBC != epbcNONE && !ir->bPeriodicMols)
{
graph = mk_graph(fplog,&(top->idef),0,top_global->natoms,FALSE,FALSE);
}
update_mdatoms(mdatoms,state->lambda);
if (deviceOptions[0]=='\0')
{
/* empty options, which should default to OpenMM in this build */
ommOptions=deviceOptions;
}
else
{
if (gmx_strncasecmp(deviceOptions,"OpenMM",6)!=0)
{
gmx_fatal(FARGS, "This Gromacs version currently only works with OpenMM. Use -device \"OpenMM:<options>\"");
}
else
{
ommOptions=strchr(deviceOptions,':');
if (NULL!=ommOptions)
{
/* Increase the pointer to skip the colon */
ommOptions++;
}
}
}
openmmData = openmm_init(fplog, ommOptions, ir, top_global, top, mdatoms, fr, state);
please_cite(fplog,"Friedrichs2009");
if (MASTER(cr))
{
/* Update mdebin with energy history if appending to output files */
if ( Flags & MD_APPENDFILES )
{
restore_energyhistory_from_state(mdebin,&state_global->enerhist);
}
/* Set the initial energy history in state to zero by updating once */
update_energyhistory(&state_global->enerhist,mdebin);
}
if (constr)
{
set_constraints(constr,top,ir,mdatoms,cr);
}
if (!ir->bContinuation)
{
if (mdatoms->cFREEZE && (state->flags & (1<<estV)))
{
/* Set the velocities of frozen particles to zero */
for (i=mdatoms->start; i<mdatoms->start+mdatoms->homenr; i++)
{
for (m=0; m<DIM; m++)
{
if (ir->opts.nFreeze[mdatoms->cFREEZE[i]][m])
{
state->v[i][m] = 0;
}
}
}
}
if (constr)
{
/* Constrain the initial coordinates and velocities */
do_constrain_first(fplog,constr,ir,mdatoms,state,f,
graph,cr,nrnb,fr,top,shake_vir);
}
if (vsite)
{
/* Construct the virtual sites for the initial configuration */
construct_vsites(fplog,vsite,state->x,nrnb,ir->delta_t,NULL,
top->idef.iparams,top->idef.il,
fr->ePBC,fr->bMolPBC,graph,cr,state->box);
}
}
debug_gmx();
if (MASTER(cr))
{
char tbuf[20];
fprintf(fplog,"Initial temperature: %g K\n",enerd->term[F_TEMP]);
fprintf(stderr,"starting mdrun '%s'\n",
*(top_global->name));
if (ir->nsteps >= 0)
{
sprintf(tbuf,"%8.1f",(ir->init_step+ir->nsteps)*ir->delta_t);
}
else
{
sprintf(tbuf,"%s","infinite");
}
if (ir->init_step > 0)
{
fprintf(stderr,"%s steps, %s ps (continuing from step %s, %8.1f ps).\n",
gmx_step_str(ir->init_step+ir->nsteps,sbuf),tbuf,
gmx_step_str(ir->init_step,sbuf2),
ir->init_step*ir->delta_t);
}
else
{
fprintf(stderr,"%s steps, %s ps.\n",
gmx_step_str(ir->nsteps,sbuf),tbuf);
}
}
fprintf(fplog,"\n");
/* Set and write start time */
runtime_start(runtime);
print_date_and_time(fplog,cr->nodeid,"Started mdrun",runtime);
wallcycle_start(wcycle,ewcRUN);
if (fplog)
fprintf(fplog,"\n");
/* safest point to do file checkpointing is here. More general point would be immediately before integrator call */
debug_gmx();
/***********************************************************
*
* Loop over MD steps
*
************************************************************/
/* loop over MD steps or if rerunMD to end of input trajectory */
bFirstStep = TRUE;
/* Skip the first Nose-Hoover integration when we get the state from tpx */
bStateFromTPX = !opt2bSet("-cpi",nfile,fnm);
bInitStep = bFirstStep && bStateFromTPX;
bStartingFromCpt = (Flags & MD_STARTFROMCPT) && bInitStep;
bLastStep = FALSE;
init_global_signals(&gs,cr,ir,repl_ex_nst);
step = ir->init_step;
step_rel = 0;
while (!bLastStep)
{
wallcycle_start(wcycle,ewcSTEP);
GMX_MPE_LOG(ev_timestep1);
bLastStep = (step_rel == ir->nsteps);
t = t0 + step*ir->delta_t;
if (gs.set[eglsSTOPCOND] != 0)
{
bLastStep = TRUE;
}
do_log = do_per_step(step,ir->nstlog) || bFirstStep || bLastStep;
do_verbose = bVerbose &&
(step % stepout == 0 || bFirstStep || bLastStep);
if (MASTER(cr) && do_log)
{
print_ebin_header(fplog,step,t,state->lambda);
}
clear_mat(force_vir);
GMX_MPE_LOG(ev_timestep2);
/* We write a checkpoint at this MD step when:
* either when we signalled through gs (in OpenMM NS works different),
* or at the last step (but not when we do not want confout),
* but never at the first step.
*/
bCPT = ((gs.set[eglsCHKPT] ||
(bLastStep && (Flags & MD_CONFOUT))) &&
step > ir->init_step );
if (bCPT)
{
gs.set[eglsCHKPT] = 0;
}
/* Now we have the energies and forces corresponding to the
* coordinates at time t. We must output all of this before
* the update.
* for RerunMD t is read from input trajectory
*/
GMX_MPE_LOG(ev_output_start);
mdof_flags = 0;
if (do_per_step(step,ir->nstxout))
{
mdof_flags |= MDOF_X;
}
if (do_per_step(step,ir->nstvout))
{
mdof_flags |= MDOF_V;
}
if (do_per_step(step,ir->nstfout))
{
mdof_flags |= MDOF_F;
}
if (do_per_step(step,ir->nstxtcout))
{
mdof_flags |= MDOF_XTC;
}
if (bCPT)
{
mdof_flags |= MDOF_CPT;
};
do_ene = (do_per_step(step,ir->nstenergy) || bLastStep);
if (mdof_flags != 0 || do_ene || do_log)
{
wallcycle_start(wcycle,ewcTRAJ);
bF = (mdof_flags & MDOF_F);
bX = (mdof_flags & (MDOF_X | MDOF_XTC | MDOF_CPT));
bV = (mdof_flags & (MDOF_V | MDOF_CPT));
openmm_copy_state(openmmData, state, &t, f, enerd, bX, bV, bF, do_ene);
upd_mdebin(mdebin, FALSE,TRUE,
t,mdatoms->tmass,enerd,state,lastbox,
shake_vir,force_vir,total_vir,pres,
ekind,mu_tot,constr);
print_ebin(outf->fp_ene,do_ene,FALSE,FALSE,do_log?fplog:NULL,
step,t,
eprNORMAL,bCompact,mdebin,fcd,groups,&(ir->opts));
write_traj(fplog,cr,outf,mdof_flags,top_global,
step,t,state,state_global,f,f_global,&n_xtc,&x_xtc);
if (bCPT)
{
nchkpt++;
bCPT = FALSE;
}
debug_gmx();
if (bLastStep && step_rel == ir->nsteps &&
(Flags & MD_CONFOUT) && MASTER(cr))
{
/* x and v have been collected in write_traj,
* because a checkpoint file will always be written
* at the last step.
*/
fprintf(stderr,"\nWriting final coordinates.\n");
if (ir->ePBC != epbcNONE && !ir->bPeriodicMols)
{
/* Make molecules whole only for confout writing */
do_pbc_mtop(fplog,ir->ePBC,state->box,top_global,state_global->x);
}
write_sto_conf_mtop(ftp2fn(efSTO,nfile,fnm),
*top_global->name,top_global,
state_global->x,state_global->v,
ir->ePBC,state->box);
debug_gmx();
}
wallcycle_stop(wcycle,ewcTRAJ);
}
GMX_MPE_LOG(ev_output_finish);
/* Determine the wallclock run time up till now */
run_time = gmx_gettime() - (double)runtime->real;
/* Check whether everything is still allright */
if (((int)gmx_get_stop_condition() > handled_stop_condition)
#ifdef GMX_THREADS
&& MASTER(cr)
#endif
)
{
/* this is just make gs.sig compatible with the hack
of sending signals around by MPI_Reduce with together with
other floats */
/* NOTE: this only works for serial code. For code that allows
MPI nodes to propagate their condition, see kernel/md.c*/
if ( gmx_get_stop_condition() == gmx_stop_cond_next_ns )
gs.set[eglsSTOPCOND]=1;
if ( gmx_get_stop_condition() == gmx_stop_cond_next )
gs.set[eglsSTOPCOND]=1;
/* < 0 means stop at next step, > 0 means stop at next NS step */
if (fplog)
{
fprintf(fplog,
"\n\nReceived the %s signal, stopping at the next %sstep\n\n",
gmx_get_signal_name(),
gs.sig[eglsSTOPCOND]==1 ? "NS " : "");
fflush(fplog);
}
fprintf(stderr,
"\n\nReceived the %s signal, stopping at the next %sstep\n\n",
gmx_get_signal_name(),
gs.sig[eglsSTOPCOND]==1 ? "NS " : "");
fflush(stderr);
handled_stop_condition=(int)gmx_get_stop_condition();
}
else if (MASTER(cr) &&
(max_hours > 0 && run_time > max_hours*60.0*60.0*0.99) &&
gs.set[eglsSTOPCOND] == 0)
{
/* Signal to terminate the run */
gs.set[eglsSTOPCOND] = 1;
if (fplog)
{
fprintf(fplog,"\nStep %s: Run time exceeded %.3f hours, will terminate the run\n",gmx_step_str(step,sbuf),max_hours*0.99);
}
fprintf(stderr, "\nStep %s: Run time exceeded %.3f hours, will terminate the run\n",gmx_step_str(step,sbuf),max_hours*0.99);
}
/* checkpoints */
if (MASTER(cr) && (cpt_period >= 0 &&
(cpt_period == 0 ||
run_time >= nchkpt*cpt_period*60.0)) &&
gs.set[eglsCHKPT] == 0)
{
gs.set[eglsCHKPT] = 1;
}
/* Time for performance */
if (((step % stepout) == 0) || bLastStep)
{
runtime_upd_proc(runtime);
}
if (do_per_step(step,ir->nstlog))
{
if (fflush(fplog) != 0)
{
gmx_fatal(FARGS,"Cannot flush logfile - maybe you are out of quota?");
}
}
/* Remaining runtime */
if (MULTIMASTER(cr) && (do_verbose || gmx_got_usr_signal() ))
{
print_time(stderr,runtime,step,ir,cr);
}
bFirstStep = FALSE;
bInitStep = FALSE;
bStartingFromCpt = FALSE;
step++;
step_rel++;
openmm_take_one_step(openmmData);
}
/* End of main MD loop */
debug_gmx();
/* Stop the time */
runtime_end(runtime);
if (MASTER(cr))
{
if (ir->nstcalcenergy > 0)
{
print_ebin(outf->fp_ene,FALSE,FALSE,FALSE,fplog,step,t,
eprAVER,FALSE,mdebin,fcd,groups,&(ir->opts));
}
}
openmm_cleanup(fplog, openmmData);
done_mdoutf(outf);
debug_gmx();
runtime->nsteps_done = step_rel;
return 0;
}