void
ob_init_iommu(uint64_t base)
{
struct iommu_regs *regs;
regs = iommu_init(&ciommu, base);
push_str("/iommu");
fword("find-device");
PUSH((unsigned long)regs);
fword("encode-int");
push_str("address");
fword("property");
PUSH(base >> 32);
fword("encode-int");
PUSH(base & 0xffffffff);
fword("encode-int");
fword("encode+");
PUSH(IOMMU_REGS);
fword("encode-int");
fword("encode+");
push_str("reg");
fword("property");
bind_func("map-in", ob_iommu_map_in);
bind_func("map-out", ob_iommu_map_out);
}
static void pagemem_init()
{
vmm_pagemem_init();
vm_pagemem_init();
#ifdef CONFIG_IOMMU
iommu_init();
#endif
}
static int
vmm_handler(module_t mod, int what, void *arg)
{
int error;
switch (what) {
case MOD_LOAD:
vmmdev_init();
if (ppt_avail_devices() > 0)
iommu_init();
error = vmm_init();
if (error == 0)
vmm_initialized = 1;
break;
case MOD_UNLOAD:
error = vmmdev_cleanup();
if (error == 0) {
vmm_resume_p = NULL;
iommu_cleanup();
if (vmm_ipinum != IPI_AST)
vmm_ipi_free(vmm_ipinum);
error = VMM_CLEANUP();
/*
* Something bad happened - prevent new
* VMs from being created
*/
if (error)
vmm_initialized = 0;
}
break;
default:
error = 0;
break;
}
return (error);
}
static void sun4m_hw_init(const struct sun4m_hwdef *hwdef,
MachineState *machine)
{
const char *cpu_model = machine->cpu_model;
unsigned int i;
void *iommu, *espdma, *ledma, *nvram;
qemu_irq *cpu_irqs[MAX_CPUS], slavio_irq[32], slavio_cpu_irq[MAX_CPUS],
espdma_irq, ledma_irq;
qemu_irq esp_reset, dma_enable;
qemu_irq fdc_tc;
qemu_irq *cpu_halt;
unsigned long kernel_size;
DriveInfo *fd[MAX_FD];
FWCfgState *fw_cfg;
unsigned int num_vsimms;
/* init CPUs */
if (!cpu_model)
cpu_model = hwdef->default_cpu_model;
for(i = 0; i < smp_cpus; i++) {
cpu_devinit(cpu_model, i, hwdef->slavio_base, &cpu_irqs[i]);
}
for (i = smp_cpus; i < MAX_CPUS; i++)
cpu_irqs[i] = qemu_allocate_irqs(dummy_cpu_set_irq, NULL, MAX_PILS);
/* set up devices */
ram_init(0, machine->ram_size, hwdef->max_mem);
/* models without ECC don't trap when missing ram is accessed */
if (!hwdef->ecc_base) {
empty_slot_init(machine->ram_size, hwdef->max_mem - machine->ram_size);
}
prom_init(hwdef->slavio_base, bios_name);
slavio_intctl = slavio_intctl_init(hwdef->intctl_base,
hwdef->intctl_base + 0x10000ULL,
cpu_irqs);
for (i = 0; i < 32; i++) {
slavio_irq[i] = qdev_get_gpio_in(slavio_intctl, i);
}
for (i = 0; i < MAX_CPUS; i++) {
slavio_cpu_irq[i] = qdev_get_gpio_in(slavio_intctl, 32 + i);
}
if (hwdef->idreg_base) {
idreg_init(hwdef->idreg_base);
}
if (hwdef->afx_base) {
afx_init(hwdef->afx_base);
}
iommu = iommu_init(hwdef->iommu_base, hwdef->iommu_version,
slavio_irq[30]);
if (hwdef->iommu_pad_base) {
/* On the real hardware (SS-5, LX) the MMU is not padded, but aliased.
Software shouldn't use aliased addresses, neither should it crash
when does. Using empty_slot instead of aliasing can help with
debugging such accesses */
empty_slot_init(hwdef->iommu_pad_base,hwdef->iommu_pad_len);
}
espdma = sparc32_dma_init(hwdef->dma_base, slavio_irq[18],
iommu, &espdma_irq, 0);
ledma = sparc32_dma_init(hwdef->dma_base + 16ULL,
slavio_irq[16], iommu, &ledma_irq, 1);
if (graphic_depth != 8 && graphic_depth != 24) {
error_report("Unsupported depth: %d", graphic_depth);
exit (1);
}
num_vsimms = 0;
if (num_vsimms == 0) {
if (vga_interface_type == VGA_CG3) {
if (graphic_depth != 8) {
error_report("Unsupported depth: %d", graphic_depth);
exit(1);
}
if (!(graphic_width == 1024 && graphic_height == 768) &&
!(graphic_width == 1152 && graphic_height == 900)) {
error_report("Unsupported resolution: %d x %d", graphic_width,
graphic_height);
exit(1);
}
/* sbus irq 5 */
cg3_init(hwdef->tcx_base, slavio_irq[11], 0x00100000,
graphic_width, graphic_height, graphic_depth);
} else {
/* If no display specified, default to TCX */
if (graphic_depth != 8 && graphic_depth != 24) {
error_report("Unsupported depth: %d", graphic_depth);
exit(1);
}
if (!(graphic_width == 1024 && graphic_height == 768)) {
error_report("Unsupported resolution: %d x %d",
graphic_width, graphic_height);
exit(1);
}
tcx_init(hwdef->tcx_base, slavio_irq[11], 0x00100000,
graphic_width, graphic_height, graphic_depth);
}
}
for (i = num_vsimms; i < MAX_VSIMMS; i++) {
/* vsimm registers probed by OBP */
if (hwdef->vsimm[i].reg_base) {
empty_slot_init(hwdef->vsimm[i].reg_base, 0x2000);
}
}
if (hwdef->sx_base) {
empty_slot_init(hwdef->sx_base, 0x2000);
}
lance_init(&nd_table[0], hwdef->le_base, ledma, ledma_irq);
nvram = m48t59_init(slavio_irq[0], hwdef->nvram_base, 0, 0x2000, 8);
slavio_timer_init_all(hwdef->counter_base, slavio_irq[19], slavio_cpu_irq, smp_cpus);
slavio_serial_ms_kbd_init(hwdef->ms_kb_base, slavio_irq[14],
display_type == DT_NOGRAPHIC, ESCC_CLOCK, 1);
/* Slavio TTYA (base+4, Linux ttyS0) is the first QEMU serial device
Slavio TTYB (base+0, Linux ttyS1) is the second QEMU serial device */
escc_init(hwdef->serial_base, slavio_irq[15], slavio_irq[15],
serial_hds[0], serial_hds[1], ESCC_CLOCK, 1);
cpu_halt = qemu_allocate_irqs(cpu_halt_signal, NULL, 1);
if (hwdef->apc_base) {
apc_init(hwdef->apc_base, cpu_halt[0]);
}
if (hwdef->fd_base) {
/* there is zero or one floppy drive */
memset(fd, 0, sizeof(fd));
fd[0] = drive_get(IF_FLOPPY, 0, 0);
sun4m_fdctrl_init(slavio_irq[22], hwdef->fd_base, fd,
&fdc_tc);
} else {
fdc_tc = *qemu_allocate_irqs(dummy_fdc_tc, NULL, 1);
}
slavio_misc_init(hwdef->slavio_base, hwdef->aux1_base, hwdef->aux2_base,
slavio_irq[30], fdc_tc);
if (drive_get_max_bus(IF_SCSI) > 0) {
fprintf(stderr, "qemu: too many SCSI bus\n");
exit(1);
}
esp_init(hwdef->esp_base, 2,
espdma_memory_read, espdma_memory_write,
espdma, espdma_irq, &esp_reset, &dma_enable);
qdev_connect_gpio_out(espdma, 0, esp_reset);
qdev_connect_gpio_out(espdma, 1, dma_enable);
if (hwdef->cs_base) {
sysbus_create_simple("SUNW,CS4231", hwdef->cs_base,
slavio_irq[5]);
}
if (hwdef->dbri_base) {
/* ISDN chip with attached CS4215 audio codec */
/* prom space */
empty_slot_init(hwdef->dbri_base+0x1000, 0x30);
/* reg space */
empty_slot_init(hwdef->dbri_base+0x10000, 0x100);
}
if (hwdef->bpp_base) {
/* parallel port */
empty_slot_init(hwdef->bpp_base, 0x20);
}
kernel_size = sun4m_load_kernel(machine->kernel_filename,
machine->initrd_filename,
machine->ram_size);
nvram_init(nvram, (uint8_t *)&nd_table[0].macaddr, machine->kernel_cmdline,
machine->boot_order, machine->ram_size, kernel_size,
graphic_width, graphic_height, graphic_depth,
hwdef->nvram_machine_id, "Sun4m");
if (hwdef->ecc_base)
ecc_init(hwdef->ecc_base, slavio_irq[28],
hwdef->ecc_version);
fw_cfg = fw_cfg_init(0, 0, CFG_ADDR, CFG_ADDR + 2);
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, hwdef->machine_id);
fw_cfg_add_i16(fw_cfg, FW_CFG_SUN4M_DEPTH, graphic_depth);
fw_cfg_add_i16(fw_cfg, FW_CFG_SUN4M_WIDTH, graphic_width);
fw_cfg_add_i16(fw_cfg, FW_CFG_SUN4M_HEIGHT, graphic_height);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, KERNEL_LOAD_ADDR);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
if (machine->kernel_cmdline) {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, CMDLINE_ADDR);
pstrcpy_targphys("cmdline", CMDLINE_ADDR, TARGET_PAGE_SIZE,
machine->kernel_cmdline);
fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA, machine->kernel_cmdline);
fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE,
strlen(machine->kernel_cmdline) + 1);
} else {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, 0);
fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, 0);
}
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, INITRD_LOAD_ADDR);
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, 0); // not used
fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, machine->boot_order[0]);
qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
}
static void sun4c_hw_init(const struct hwdef *hwdef, int RAM_size,
const char *boot_device,
DisplayState *ds, const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
CPUState *env;
unsigned int i;
void *iommu, *espdma, *ledma, *main_esp, *nvram;
qemu_irq *cpu_irqs, *slavio_irq, *espdma_irq, *ledma_irq;
qemu_irq *esp_reset, *le_reset;
unsigned long prom_offset, kernel_size;
int ret;
char buf[1024];
BlockDriverState *fd[MAX_FD];
int index;
/* init CPU */
if (!cpu_model)
cpu_model = hwdef->default_cpu_model;
env = cpu_init(cpu_model);
if (!env) {
fprintf(stderr, "qemu: Unable to find Sparc CPU definition\n");
exit(1);
}
cpu_sparc_set_id(env, 0);
qemu_register_reset(main_cpu_reset, env);
register_savevm("cpu", 0, 3, cpu_save, cpu_load, env);
cpu_irqs = qemu_allocate_irqs(cpu_set_irq, env, MAX_PILS);
env->prom_addr = hwdef->slavio_base;
/* allocate RAM */
if ((uint64_t)RAM_size > hwdef->max_mem) {
fprintf(stderr, "qemu: Too much memory for this machine: %d, maximum %d\n",
(unsigned int)RAM_size / (1024 * 1024),
(unsigned int)hwdef->max_mem / (1024 * 1024));
exit(1);
}
cpu_register_physical_memory(0, RAM_size, 0);
/* load boot prom */
prom_offset = RAM_size + hwdef->vram_size;
cpu_register_physical_memory(hwdef->slavio_base,
(PROM_SIZE_MAX + TARGET_PAGE_SIZE - 1) &
TARGET_PAGE_MASK,
prom_offset | IO_MEM_ROM);
if (bios_name == NULL)
bios_name = PROM_FILENAME;
snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
ret = load_elf(buf, hwdef->slavio_base - PROM_VADDR, NULL, NULL, NULL);
if (ret < 0 || ret > PROM_SIZE_MAX)
ret = load_image(buf, phys_ram_base + prom_offset);
if (ret < 0 || ret > PROM_SIZE_MAX) {
fprintf(stderr, "qemu: could not load prom '%s'\n",
buf);
exit(1);
}
prom_offset += (ret + TARGET_PAGE_SIZE - 1) & TARGET_PAGE_MASK;
/* set up devices */
slavio_intctl = sun4c_intctl_init(hwdef->sun4c_intctl_base,
&slavio_irq, cpu_irqs);
iommu = iommu_init(hwdef->iommu_base, hwdef->iommu_version,
slavio_irq[hwdef->me_irq]);
espdma = sparc32_dma_init(hwdef->dma_base, slavio_irq[hwdef->esp_irq],
iommu, &espdma_irq, &esp_reset);
ledma = sparc32_dma_init(hwdef->dma_base + 16ULL,
slavio_irq[hwdef->le_irq], iommu, &ledma_irq,
&le_reset);
if (graphic_depth != 8 && graphic_depth != 24) {
fprintf(stderr, "qemu: Unsupported depth: %d\n", graphic_depth);
exit (1);
}
tcx_init(ds, hwdef->tcx_base, phys_ram_base + RAM_size, RAM_size,
hwdef->vram_size, graphic_width, graphic_height, graphic_depth);
if (nd_table[0].model == NULL
|| strcmp(nd_table[0].model, "lance") == 0) {
lance_init(&nd_table[0], hwdef->le_base, ledma, *ledma_irq, le_reset);
} else if (strcmp(nd_table[0].model, "?") == 0) {
fprintf(stderr, "qemu: Supported NICs: lance\n");
exit (1);
} else {
fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd_table[0].model);
exit (1);
}
nvram = m48t59_init(slavio_irq[0], hwdef->nvram_base, 0,
hwdef->nvram_size, 2);
slavio_serial_ms_kbd_init(hwdef->ms_kb_base, slavio_irq[hwdef->ms_kb_irq],
nographic);
// Slavio TTYA (base+4, Linux ttyS0) is the first Qemu serial device
// Slavio TTYB (base+0, Linux ttyS1) is the second Qemu serial device
slavio_serial_init(hwdef->serial_base, slavio_irq[hwdef->ser_irq],
serial_hds[1], serial_hds[0]);
if (hwdef->fd_base != (target_phys_addr_t)-1) {
/* there is zero or one floppy drive */
fd[1] = fd[0] = NULL;
index = drive_get_index(IF_FLOPPY, 0, 0);
if (index != -1)
fd[0] = drives_table[index].bdrv;
sun4m_fdctrl_init(slavio_irq[hwdef->fd_irq], hwdef->fd_base, fd);
}
if (drive_get_max_bus(IF_SCSI) > 0) {
fprintf(stderr, "qemu: too many SCSI bus\n");
exit(1);
}
main_esp = esp_init(hwdef->esp_base, espdma, *espdma_irq,
esp_reset);
for (i = 0; i < ESP_MAX_DEVS; i++) {
index = drive_get_index(IF_SCSI, 0, i);
if (index == -1)
continue;
esp_scsi_attach(main_esp, drives_table[index].bdrv, i);
}
kernel_size = sun4m_load_kernel(kernel_filename, kernel_cmdline,
initrd_filename);
nvram_init((m48t59_t *)nvram, (uint8_t *)&nd_table[0].macaddr, kernel_cmdline,
boot_device, RAM_size, kernel_size, graphic_width,
graphic_height, graphic_depth, hwdef->machine_id, "Sun4c");
}
void __init sbus_init(void)
{
int nd, this_sbus, sbus_devs, topnd, iommund;
unsigned int sbus_clock;
struct sbus_bus *sbus;
struct sbus_dev *this_dev;
int num_sbus = 0; /* How many did we find? */
#ifndef __sparc_v9__
register_proc_sparc_ioport();
#endif
#ifdef CONFIG_SUN4
return sun4_dvma_init();
#endif
topnd = prom_getchild(prom_root_node);
/* Finding the first sbus is a special case... */
iommund = 0;
if(sparc_cpu_model == sun4u) {
nd = prom_searchsiblings(topnd, "sbus");
if(nd == 0) {
#ifdef CONFIG_PCI
if (!pcibios_present()) {
prom_printf("Neither SBUS nor PCI found.\n");
prom_halt();
} else {
#ifdef __sparc_v9__
firetruck_init();
#endif
}
return;
#else
prom_printf("YEEE, UltraSparc sbus not found\n");
prom_halt();
#endif
}
} else if(sparc_cpu_model == sun4d) {
if((iommund = prom_searchsiblings(topnd, "io-unit")) == 0 ||
(nd = prom_getchild(iommund)) == 0 ||
(nd = prom_searchsiblings(nd, "sbi")) == 0) {
panic("sbi not found");
}
} else if((nd = prom_searchsiblings(topnd, "sbus")) == 0) {
if((iommund = prom_searchsiblings(topnd, "iommu")) == 0 ||
(nd = prom_getchild(iommund)) == 0 ||
(nd = prom_searchsiblings(nd, "sbus")) == 0) {
#ifdef CONFIG_PCI
if (!pcibios_present()) {
prom_printf("Neither SBUS nor PCI found.\n");
prom_halt();
}
return;
#else
/* No reason to run further - the data access trap will occur. */
panic("sbus not found");
#endif
}
}
/* Ok, we've found the first one, allocate first SBus struct
* and place in chain.
*/
sbus = sbus_root = kmalloc(sizeof(struct sbus_bus), GFP_ATOMIC);
sbus->next = NULL;
sbus->prom_node = nd;
this_sbus = nd;
if(iommund && sparc_cpu_model != sun4u && sparc_cpu_model != sun4d)
iommu_init(iommund, sbus);
/* Loop until we find no more SBUS's */
while(this_sbus) {
#ifdef __sparc_v9__
/* IOMMU hides inside SBUS/SYSIO prom node on Ultra. */
if(sparc_cpu_model == sun4u) {
extern void sbus_iommu_init(int prom_node, struct sbus_bus *sbus);
sbus_iommu_init(this_sbus, sbus);
}
#endif
#ifndef __sparc_v9__
if (sparc_cpu_model == sun4d)
iounit_init(this_sbus, iommund, sbus);
#endif
printk("sbus%d: ", num_sbus);
sbus_clock = prom_getint(this_sbus, "clock-frequency");
if(sbus_clock == -1)
sbus_clock = (25*1000*1000);
printk("Clock %d.%d MHz\n", (int) ((sbus_clock/1000)/1000),
(int) (((sbus_clock/1000)%1000 != 0) ?
(((sbus_clock/1000)%1000) + 1000) : 0));
prom_getstring(this_sbus, "name",
sbus->prom_name, sizeof(sbus->prom_name));
sbus->clock_freq = sbus_clock;
#ifndef __sparc_v9__
if (sparc_cpu_model == sun4d) {
sbus->devid = prom_getint(iommund, "device-id");
sbus->board = prom_getint(iommund, "board#");
}
#endif
sbus_bus_ranges_init(iommund, sbus);
sbus_devs = prom_getchild(this_sbus);
if (!sbus_devs) {
sbus->devices = NULL;
goto next_bus;
}
sbus->devices = kmalloc(sizeof(struct sbus_dev), GFP_ATOMIC);
this_dev = sbus->devices;
this_dev->next = NULL;
this_dev->bus = sbus;
this_dev->parent = NULL;
fill_sbus_device(sbus_devs, this_dev);
/* Should we traverse for children? */
if(prom_getchild(sbus_devs)) {
/* Allocate device node */
this_dev->child = kmalloc(sizeof(struct sbus_dev),
GFP_ATOMIC);
/* Fill it */
this_dev->child->bus = sbus;
this_dev->child->next = 0;
fill_sbus_device(prom_getchild(sbus_devs),
this_dev->child);
sbus_do_child_siblings(prom_getchild(sbus_devs),
this_dev->child,
this_dev,
sbus);
} else {
this_dev->child = NULL;
}
while((sbus_devs = prom_getsibling(sbus_devs)) != 0) {
/* Allocate device node */
this_dev->next = kmalloc(sizeof(struct sbus_dev),
GFP_ATOMIC);
this_dev = this_dev->next;
this_dev->next = NULL;
/* Fill it */
this_dev->bus = sbus;
this_dev->parent = NULL;
fill_sbus_device(sbus_devs, this_dev);
/* Is there a child node hanging off of us? */
if(prom_getchild(sbus_devs)) {
/* Get new device struct */
this_dev->child = kmalloc(sizeof(struct sbus_dev),
GFP_ATOMIC);
/* Fill it */
this_dev->child->bus = sbus;
this_dev->child->next = 0;
fill_sbus_device(prom_getchild(sbus_devs),
this_dev->child);
sbus_do_child_siblings(prom_getchild(sbus_devs),
this_dev->child,
this_dev,
sbus);
} else {
this_dev->child = NULL;
}
}
/* Walk all devices and apply parent ranges. */
sbus_fixup_all_regs(sbus->devices);
dvma_init(sbus);
next_bus:
num_sbus++;
if(sparc_cpu_model == sun4u) {
this_sbus = prom_getsibling(this_sbus);
if(!this_sbus)
break;
this_sbus = prom_searchsiblings(this_sbus, "sbus");
} else if(sparc_cpu_model == sun4d) {
iommund = prom_getsibling(iommund);
if(!iommund)
break;
iommund = prom_searchsiblings(iommund, "io-unit");
if(!iommund)
break;
this_sbus = prom_searchsiblings(prom_getchild(iommund), "sbi");
} else {
this_sbus = prom_getsibling(this_sbus);
if(!this_sbus)
break;
this_sbus = prom_searchsiblings(this_sbus, "sbus");
}
if(this_sbus) {
sbus->next = kmalloc(sizeof(struct sbus_bus), GFP_ATOMIC);
sbus = sbus->next;
sbus->next = NULL;
sbus->prom_node = this_sbus;
} else {
break;
}
} /* while(this_sbus) */
if (sparc_cpu_model == sun4d) {
extern void sun4d_init_sbi_irq(void);
sun4d_init_sbi_irq();
}
rs_init();
#ifdef __sparc_v9__
if (sparc_cpu_model == sun4u) {
firetruck_init();
}
#endif
#ifdef CONFIG_SUN_AUXIO
if (sparc_cpu_model == sun4u)
auxio_probe ();
#endif
#ifdef __sparc_v9__
if (sparc_cpu_model == sun4u) {
extern void clock_probe(void);
clock_probe();
}
#endif
}
static int
sbus_probe(device_t dev)
{
struct sbus_softc *sc = device_get_softc(dev);
struct sbus_devinfo *sdi;
struct sbus_ranges *range;
struct resource *res;
device_t cdev;
bus_addr_t phys;
bus_size_t size;
char *name, *cname, *t;
phandle_t child, node = nexus_get_node(dev);
u_int64_t mr;
int intr, clock, rid, vec, i;
t = nexus_get_device_type(dev);
if (((t == NULL || strcmp(t, OFW_SBUS_TYPE) != 0)) &&
strcmp(nexus_get_name(dev), OFW_SBUS_NAME) != 0)
return (ENXIO);
device_set_desc(dev, "U2S UPA-SBus bridge");
if ((sc->sc_nreg = OF_getprop_alloc(node, "reg", sizeof(*sc->sc_reg),
(void **)&sc->sc_reg)) == -1) {
panic("sbus_probe: error getting reg property");
}
if (sc->sc_nreg < 1)
panic("sbus_probe: bogus properties");
phys = UPA_REG_PHYS(&sc->sc_reg[0]);
size = UPA_REG_SIZE(&sc->sc_reg[0]);
rid = 0;
sc->sc_sysio_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, phys,
phys + size - 1, size, RF_ACTIVE);
if (sc->sc_sysio_res == NULL ||
rman_get_start(sc->sc_sysio_res) != phys)
panic("sbus_probe: can't allocate device memory");
sc->sc_bustag = rman_get_bustag(sc->sc_sysio_res);
sc->sc_bushandle = rman_get_bushandle(sc->sc_sysio_res);
if (OF_getprop(node, "interrupts", &intr, sizeof(intr)) == -1)
panic("sbus_probe: cannot get IGN");
sc->sc_ign = intr & INTMAP_IGN_MASK; /* Find interrupt group no */
sc->sc_cbustag = sbus_alloc_bustag(sc);
/*
* Record clock frequency for synchronous SCSI.
* IS THIS THE CORRECT DEFAULT??
*/
if (OF_getprop(node, "clock-frequency", &clock, sizeof(clock)) == -1)
clock = 25000000;
sc->sc_clockfreq = clock;
clock /= 1000;
device_printf(dev, "clock %d.%03d MHz\n", clock / 1000, clock % 1000);
sc->sc_dmatag = nexus_get_dmatag(dev);
if (bus_dma_tag_create(sc->sc_dmatag, 8, 1, 0, 0x3ffffffff, NULL, NULL,
0x3ffffffff, 0xff, 0xffffffff, 0, &sc->sc_cdmatag) != 0)
panic("bus_dma_tag_create failed");
/* Customize the tag */
sc->sc_cdmatag->cookie = sc;
sc->sc_cdmatag->dmamap_create = sbus_dmamap_create;
sc->sc_cdmatag->dmamap_destroy = sbus_dmamap_destroy;
sc->sc_cdmatag->dmamap_load = sbus_dmamap_load;
sc->sc_cdmatag->dmamap_unload = sbus_dmamap_unload;
sc->sc_cdmatag->dmamap_sync = sbus_dmamap_sync;
sc->sc_cdmatag->dmamem_alloc = sbus_dmamem_alloc;
sc->sc_cdmatag->dmamem_free = sbus_dmamem_free;
/* XXX: register as root dma tag (kluge). */
sparc64_root_dma_tag = sc->sc_cdmatag;
/*
* Collect address translations from the OBP.
*/
if ((sc->sc_nrange = OF_getprop_alloc(node, "ranges",
sizeof(*range), (void **)&range)) == -1) {
panic("%s: error getting ranges property",
device_get_name(dev));
}
sc->sc_rd = (struct sbus_rd *)malloc(sizeof(*sc->sc_rd) * sc->sc_nrange,
M_DEVBUF, M_NOWAIT);
if (sc->sc_rd == NULL)
panic("sbus_probe: could not allocate rmans");
/*
* Preallocate all space that the SBus bridge decodes, so that nothing
* else gets in the way; set up rmans etc.
*/
for (i = 0; i < sc->sc_nrange; i++) {
phys = range[i].poffset | ((bus_addr_t)range[i].pspace << 32);
size = range[i].size;
sc->sc_rd[i].rd_slot = range[i].cspace;
sc->sc_rd[i].rd_coffset = range[i].coffset;
sc->sc_rd[i].rd_cend = sc->sc_rd[i].rd_coffset + size;
rid = 0;
if ((res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, phys,
phys + size - 1, size, RF_ACTIVE)) == NULL)
panic("sbus_probe: could not allocate decoded range");
sc->sc_rd[i].rd_bushandle = rman_get_bushandle(res);
sc->sc_rd[i].rd_rman.rm_type = RMAN_ARRAY;
sc->sc_rd[i].rd_rman.rm_descr = "SBus Device Memory";
if (rman_init(&sc->sc_rd[i].rd_rman) != 0 ||
rman_manage_region(&sc->sc_rd[i].rd_rman, 0, size) != 0)
panic("psycho_probe: failed to set up memory rman");
sc->sc_rd[i].rd_poffset = phys;
sc->sc_rd[i].rd_pend = phys + size;
sc->sc_rd[i].rd_res = res;
}
free(range, M_OFWPROP);
/*
* Get the SBus burst transfer size if burst transfers are supported.
* XXX: is the default correct?
*/
if (OF_getprop(node, "burst-sizes", &sc->sc_burst,
sizeof(sc->sc_burst)) == -1 || sc->sc_burst == 0)
sc->sc_burst = SBUS_BURST_DEF;
/* initalise the IOMMU */
/* punch in our copies */
sc->sc_is.is_bustag = sc->sc_bustag;
sc->sc_is.is_bushandle = sc->sc_bushandle;
sc->sc_is.is_iommu = SBR_IOMMU;
sc->sc_is.is_dtag = SBR_IOMMU_TLB_TAG_DIAG;
sc->sc_is.is_ddram = SBR_IOMMU_TLB_DATA_DIAG;
sc->sc_is.is_dqueue = SBR_IOMMU_QUEUE_DIAG;
sc->sc_is.is_dva = SBR_IOMMU_SVADIAG;
sc->sc_is.is_dtcmp = 0;
sc->sc_is.is_sb[0] = SBR_STRBUF;
sc->sc_is.is_sb[1] = NULL;
/* give us a nice name.. */
name = (char *)malloc(32, M_DEVBUF, M_NOWAIT);
if (name == 0)
panic("sbus_probe: couldn't malloc iommu name");
snprintf(name, 32, "%s dvma", device_get_name(dev));
/*
* Note: the SBus IOMMU ignores the high bits of an address, so a NULL
* DMA pointer will be translated by the first page of the IOTSB.
* To detect bugs we'll allocate and ignore the first entry.
*/
iommu_init(name, &sc->sc_is, 0, -1, 1);
/* Enable the over-temperature and power-fail intrrupts. */
rid = 0;
mr = SYSIO_READ8(sc, SBR_THERM_INT_MAP);
vec = INTVEC(mr);
if ((sc->sc_ot_ires = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, vec,
vec, 1, RF_ACTIVE)) == NULL)
panic("sbus_probe: failed to get temperature interrupt");
bus_setup_intr(dev, sc->sc_ot_ires, INTR_TYPE_MISC | INTR_FAST,
sbus_overtemp, sc, &sc->sc_ot_ihand);
SYSIO_WRITE8(sc, SBR_THERM_INT_MAP, INTMAP_ENABLE(mr, PCPU_GET(mid)));
rid = 0;
mr = SYSIO_READ8(sc, SBR_POWER_INT_MAP);
vec = INTVEC(mr);
if ((sc->sc_pf_ires = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, vec,
vec, 1, RF_ACTIVE)) == NULL)
panic("sbus_probe: failed to get power fail interrupt");
bus_setup_intr(dev, sc->sc_pf_ires, INTR_TYPE_MISC | INTR_FAST,
sbus_pwrfail, sc, &sc->sc_pf_ihand);
SYSIO_WRITE8(sc, SBR_POWER_INT_MAP, INTMAP_ENABLE(mr, PCPU_GET(mid)));
/* Initialize the counter-timer. */
sparc64_counter_init(sc->sc_bustag, sc->sc_bushandle, SBR_TC0);
/*
* Loop through ROM children, fixing any relative addresses
* and then configuring each device.
* `specials' is an array of device names that are treated
* specially:
*/
for (child = OF_child(node); child != 0; child = OF_peer(child)) {
if ((OF_getprop_alloc(child, "name", 1, (void **)&cname)) == -1)
continue;
if ((sdi = sbus_setup_dinfo(sc, child, cname)) == NULL) {
device_printf(dev, "<%s>: incomplete\n", cname);
free(cname, M_OFWPROP);
continue;
}
if ((cdev = device_add_child(dev, NULL, -1)) == NULL)
panic("sbus_probe: device_add_child failed");
device_set_ivars(cdev, sdi);
}
return (0);
}
static void sun4d_hw_init(const struct sun4d_hwdef *hwdef, int RAM_size,
const char *boot_device,
DisplayState *ds, const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
CPUState *env, *envs[MAX_CPUS];
unsigned int i;
void *iounits[MAX_IOUNITS], *espdma, *ledma, *main_esp, *nvram, *sbi;
qemu_irq *cpu_irqs[MAX_CPUS], *sbi_irq, *sbi_cpu_irq,
*espdma_irq, *ledma_irq;
qemu_irq *esp_reset, *le_reset;
unsigned long prom_offset, kernel_size;
int ret;
char buf[1024];
int index;
/* init CPUs */
if (!cpu_model)
cpu_model = hwdef->default_cpu_model;
for (i = 0; i < smp_cpus; i++) {
env = cpu_init(cpu_model);
if (!env) {
fprintf(stderr, "qemu: Unable to find Sparc CPU definition\n");
exit(1);
}
cpu_sparc_set_id(env, i);
envs[i] = env;
if (i == 0) {
qemu_register_reset(main_cpu_reset, env);
} else {
qemu_register_reset(secondary_cpu_reset, env);
env->halted = 1;
}
register_savevm("cpu", i, 3, cpu_save, cpu_load, env);
cpu_irqs[i] = qemu_allocate_irqs(cpu_set_irq, envs[i], MAX_PILS);
env->prom_addr = hwdef->slavio_base;
}
for (i = smp_cpus; i < MAX_CPUS; i++)
cpu_irqs[i] = qemu_allocate_irqs(dummy_cpu_set_irq, NULL, MAX_PILS);
/* allocate RAM */
if ((uint64_t)RAM_size > hwdef->max_mem) {
fprintf(stderr, "qemu: Too much memory for this machine: %d, maximum %d\n",
(unsigned int)RAM_size / (1024 * 1024),
(unsigned int)(hwdef->max_mem / (1024 * 1024)));
exit(1);
}
cpu_register_physical_memory(0, RAM_size, 0);
/* load boot prom */
prom_offset = RAM_size + hwdef->vram_size;
cpu_register_physical_memory(hwdef->slavio_base,
(PROM_SIZE_MAX + TARGET_PAGE_SIZE - 1) &
TARGET_PAGE_MASK,
prom_offset | IO_MEM_ROM);
if (bios_name == NULL)
bios_name = PROM_FILENAME;
snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
ret = load_elf(buf, hwdef->slavio_base - PROM_VADDR, NULL, NULL, NULL);
if (ret < 0 || ret > PROM_SIZE_MAX)
ret = load_image(buf, phys_ram_base + prom_offset);
if (ret < 0 || ret > PROM_SIZE_MAX) {
fprintf(stderr, "qemu: could not load prom '%s'\n",
buf);
exit(1);
}
/* set up devices */
sbi = sbi_init(hwdef->sbi_base, &sbi_irq, &sbi_cpu_irq, cpu_irqs);
for (i = 0; i < MAX_IOUNITS; i++)
if (hwdef->iounit_bases[i] != (target_phys_addr_t)-1)
iounits[i] = iommu_init(hwdef->iounit_bases[i],
hwdef->iounit_version,
sbi_irq[hwdef->me_irq]);
espdma = sparc32_dma_init(hwdef->espdma_base, sbi_irq[hwdef->esp_irq],
iounits[0], &espdma_irq, &esp_reset);
ledma = sparc32_dma_init(hwdef->ledma_base, sbi_irq[hwdef->le_irq],
iounits[0], &ledma_irq, &le_reset);
if (graphic_depth != 8 && graphic_depth != 24) {
fprintf(stderr, "qemu: Unsupported depth: %d\n", graphic_depth);
exit (1);
}
tcx_init(ds, hwdef->tcx_base, phys_ram_base + RAM_size, RAM_size,
hwdef->vram_size, graphic_width, graphic_height, graphic_depth);
if (nd_table[0].model == NULL
|| strcmp(nd_table[0].model, "lance") == 0) {
lance_init(&nd_table[0], hwdef->le_base, ledma, *ledma_irq, le_reset);
} else if (strcmp(nd_table[0].model, "?") == 0) {
fprintf(stderr, "qemu: Supported NICs: lance\n");
exit (1);
} else {
fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd_table[0].model);
exit (1);
}
nvram = m48t59_init(sbi_irq[0], hwdef->nvram_base, 0,
hwdef->nvram_size, 8);
slavio_timer_init_all(hwdef->counter_base, sbi_irq[hwdef->clock1_irq],
sbi_cpu_irq, smp_cpus);
slavio_serial_ms_kbd_init(hwdef->ms_kb_base, sbi_irq[hwdef->ms_kb_irq],
nographic);
// Slavio TTYA (base+4, Linux ttyS0) is the first Qemu serial device
// Slavio TTYB (base+0, Linux ttyS1) is the second Qemu serial device
slavio_serial_init(hwdef->serial_base, sbi_irq[hwdef->ser_irq],
serial_hds[1], serial_hds[0]);
if (drive_get_max_bus(IF_SCSI) > 0) {
fprintf(stderr, "qemu: too many SCSI bus\n");
exit(1);
}
main_esp = esp_init(hwdef->esp_base, espdma, *espdma_irq,
esp_reset);
for (i = 0; i < ESP_MAX_DEVS; i++) {
index = drive_get_index(IF_SCSI, 0, i);
if (index == -1)
continue;
esp_scsi_attach(main_esp, drives_table[index].bdrv, i);
}
kernel_size = sun4m_load_kernel(kernel_filename, kernel_cmdline,
initrd_filename);
nvram_init(nvram, (uint8_t *)&nd_table[0].macaddr, kernel_cmdline,
boot_device, RAM_size, kernel_size, graphic_width,
graphic_height, graphic_depth, hwdef->machine_id, "Sun4d");
}
static int
sbus_attach(device_t dev)
{
struct sbus_softc *sc;
struct sbus_devinfo *sdi;
struct sbus_icarg *sica;
struct sbus_ranges *range;
struct resource *res;
struct resource_list *rl;
device_t cdev;
bus_addr_t intrclr, intrmap, phys;
bus_size_t size;
u_long vec;
phandle_t child, node;
uint32_t prop;
int i, j;
sc = device_get_softc(dev);
sc->sc_dev = dev;
node = ofw_bus_get_node(dev);
i = 0;
sc->sc_sysio_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &i,
RF_ACTIVE);
if (sc->sc_sysio_res == NULL)
panic("%s: cannot allocate device memory", __func__);
if (OF_getprop(node, "interrupts", &prop, sizeof(prop)) == -1)
panic("%s: cannot get IGN", __func__);
sc->sc_ign = INTIGN(prop);
/*
* Record clock frequency for synchronous SCSI.
* IS THIS THE CORRECT DEFAULT??
*/
if (OF_getprop(node, "clock-frequency", &prop, sizeof(prop)) == -1)
prop = 25000000;
sc->sc_clockfreq = prop;
prop /= 1000;
device_printf(dev, "clock %d.%03d MHz\n", prop / 1000, prop % 1000);
/*
* Collect address translations from the OBP.
*/
if ((sc->sc_nrange = OF_getprop_alloc(node, "ranges",
sizeof(*range), (void **)&range)) == -1) {
panic("%s: error getting ranges property", __func__);
}
sc->sc_rd = malloc(sizeof(*sc->sc_rd) * sc->sc_nrange, M_DEVBUF,
M_NOWAIT | M_ZERO);
if (sc->sc_rd == NULL)
panic("%s: cannot allocate rmans", __func__);
/*
* Preallocate all space that the SBus bridge decodes, so that nothing
* else gets in the way; set up rmans etc.
*/
rl = BUS_GET_RESOURCE_LIST(device_get_parent(dev), dev);
for (i = 0; i < sc->sc_nrange; i++) {
phys = range[i].poffset | ((bus_addr_t)range[i].pspace << 32);
size = range[i].size;
sc->sc_rd[i].rd_slot = range[i].cspace;
sc->sc_rd[i].rd_coffset = range[i].coffset;
sc->sc_rd[i].rd_cend = sc->sc_rd[i].rd_coffset + size;
j = resource_list_add_next(rl, SYS_RES_MEMORY, phys,
phys + size - 1, size);
if ((res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &j,
RF_ACTIVE)) == NULL)
panic("%s: cannot allocate decoded range", __func__);
sc->sc_rd[i].rd_bushandle = rman_get_bushandle(res);
sc->sc_rd[i].rd_rman.rm_type = RMAN_ARRAY;
sc->sc_rd[i].rd_rman.rm_descr = "SBus Device Memory";
if (rman_init(&sc->sc_rd[i].rd_rman) != 0 ||
rman_manage_region(&sc->sc_rd[i].rd_rman, 0, size) != 0)
panic("%s: failed to set up memory rman", __func__);
sc->sc_rd[i].rd_poffset = phys;
sc->sc_rd[i].rd_pend = phys + size;
sc->sc_rd[i].rd_res = res;
}
free(range, M_OFWPROP);
/*
* Get the SBus burst transfer size if burst transfers are supported.
*/
if (OF_getprop(node, "up-burst-sizes", &sc->sc_burst,
sizeof(sc->sc_burst)) == -1 || sc->sc_burst == 0)
sc->sc_burst =
(SBUS_BURST64_DEF << SBUS_BURST64_SHIFT) | SBUS_BURST_DEF;
/* initalise the IOMMU */
/* punch in our copies */
sc->sc_is.is_pmaxaddr = IOMMU_MAXADDR(SBUS_IOMMU_BITS);
sc->sc_is.is_bustag = rman_get_bustag(sc->sc_sysio_res);
sc->sc_is.is_bushandle = rman_get_bushandle(sc->sc_sysio_res);
sc->sc_is.is_iommu = SBR_IOMMU;
sc->sc_is.is_dtag = SBR_IOMMU_TLB_TAG_DIAG;
sc->sc_is.is_ddram = SBR_IOMMU_TLB_DATA_DIAG;
sc->sc_is.is_dqueue = SBR_IOMMU_QUEUE_DIAG;
sc->sc_is.is_dva = SBR_IOMMU_SVADIAG;
sc->sc_is.is_dtcmp = 0;
sc->sc_is.is_sb[0] = SBR_STRBUF;
sc->sc_is.is_sb[1] = 0;
/*
* Note: the SBus IOMMU ignores the high bits of an address, so a NULL
* DMA pointer will be translated by the first page of the IOTSB.
* To detect bugs we'll allocate and ignore the first entry.
*/
iommu_init(device_get_nameunit(dev), &sc->sc_is, 3, -1, 1);
/* Create the DMA tag. */
if (bus_dma_tag_create(bus_get_dma_tag(dev), 8, 0,
sc->sc_is.is_pmaxaddr, ~0, NULL, NULL, sc->sc_is.is_pmaxaddr,
0xff, 0xffffffff, 0, NULL, NULL, &sc->sc_cdmatag) != 0)
panic("%s: bus_dma_tag_create failed", __func__);
/* Customize the tag. */
sc->sc_cdmatag->dt_cookie = &sc->sc_is;
sc->sc_cdmatag->dt_mt = &iommu_dma_methods;
/*
* Hunt through all the interrupt mapping regs and register our
* interrupt controller for the corresponding interrupt vectors.
* We do this early in order to be able to catch stray interrupts.
*/
for (i = 0; i <= SBUS_MAX_INO; i++) {
if (sbus_find_intrmap(sc, i, &intrmap, &intrclr) == 0)
continue;
sica = malloc(sizeof(*sica), M_DEVBUF, M_NOWAIT);
if (sica == NULL)
panic("%s: could not allocate interrupt controller "
"argument", __func__);
sica->sica_sc = sc;
sica->sica_map = intrmap;
sica->sica_clr = intrclr;
#ifdef SBUS_DEBUG
device_printf(dev,
"intr map (INO %d, %s) %#lx: %#lx, clr: %#lx\n",
i, (i & INTMAP_OBIO_MASK) == 0 ? "SBus slot" : "OBIO",
(u_long)intrmap, (u_long)SYSIO_READ8(sc, intrmap),
(u_long)intrclr);
#endif
j = intr_controller_register(INTMAP_VEC(sc->sc_ign, i),
&sbus_ic, sica);
if (j != 0)
device_printf(dev, "could not register interrupt "
"controller for INO %d (%d)\n", i, j);
}
/* Enable the over-temperature and power-fail interrupts. */
i = 4;
sc->sc_ot_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ, &i,
RF_ACTIVE);
if (sc->sc_ot_ires == NULL ||
INTIGN(vec = rman_get_start(sc->sc_ot_ires)) != sc->sc_ign ||
INTVEC(SYSIO_READ8(sc, SBR_THERM_INT_MAP)) != vec ||
intr_vectors[vec].iv_ic != &sbus_ic ||
bus_setup_intr(dev, sc->sc_ot_ires, INTR_TYPE_MISC | INTR_BRIDGE,
NULL, sbus_overtemp, sc, &sc->sc_ot_ihand) != 0)
panic("%s: failed to set up temperature interrupt", __func__);
i = 3;
sc->sc_pf_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ, &i,
RF_ACTIVE);
if (sc->sc_pf_ires == NULL ||
INTIGN(vec = rman_get_start(sc->sc_pf_ires)) != sc->sc_ign ||
INTVEC(SYSIO_READ8(sc, SBR_POWER_INT_MAP)) != vec ||
intr_vectors[vec].iv_ic != &sbus_ic ||
bus_setup_intr(dev, sc->sc_pf_ires, INTR_TYPE_MISC | INTR_BRIDGE,
NULL, sbus_pwrfail, sc, &sc->sc_pf_ihand) != 0)
panic("%s: failed to set up power fail interrupt", __func__);
/* Initialize the counter-timer. */
sparc64_counter_init(device_get_nameunit(dev),
rman_get_bustag(sc->sc_sysio_res),
rman_get_bushandle(sc->sc_sysio_res), SBR_TC0);
/*
* Loop through ROM children, fixing any relative addresses
* and then configuring each device.
*/
for (child = OF_child(node); child != 0; child = OF_peer(child)) {
if ((sdi = sbus_setup_dinfo(dev, sc, child)) == NULL)
continue;
/*
* For devices where there are variants that are actually
* split into two SBus devices (as opposed to the first
* half of the device being a SBus device and the second
* half hanging off of the first one) like 'auxio' and
* 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device
* which is a prerequisite to the driver attaching to the
* second one with a lower order. Saves us from dealing
* with different probe orders in the respective device
* drivers which generally is more hackish.
*/
cdev = device_add_child_ordered(dev, (OF_child(child) == 0 &&
sbus_inlist(sdi->sdi_obdinfo.obd_name, sbus_order_first)) ?
SBUS_ORDER_FIRST : SBUS_ORDER_NORMAL, NULL, -1);
if (cdev == NULL) {
device_printf(dev,
"<%s>: device_add_child_ordered failed\n",
sdi->sdi_obdinfo.obd_name);
sbus_destroy_dinfo(sdi);
continue;
}
device_set_ivars(cdev, sdi);
}
return (bus_generic_attach(dev));
}
