static int run_sdatest(uvast destEngineId)
{
SenderThreadParms parms;
pthread_t senderThread;
isignal(SIGTERM, interruptThread);
if (destEngineId)
{
/* Must start sender thread. */
parms.destEngineId = destEngineId;
parms.running = 1;
if (pthread_begin(&senderThread, NULL, sendItems, &parms))
{
putSysErrmsg("sdatest can't create send thread", NULL);
return 1;
}
}
if (sda_run(getLengthOfItem, handleItem) < 0)
{
putErrmsg("sdatest sda_run failed.", NULL);
}
if (destEngineId)
{
parms.running = 0;
pthread_join(senderThread, NULL);
}
writeErrmsgMemos();
writeMemo("[i] sdatest main thread has ended.");
ionDetach();
return 0;
}
void bp_detach()
{
ionDetach();
}
int bpclock(int a1, int a2, int a3, int a4, int a5,
int a6, int a7, int a8, int a9, int a10)
{
#else
int main(int argc, char *argv[])
{
#endif
Sdr sdr;
BpDB *bpConstants;
int state = 1;
time_t currentTime;
if (bpAttach() < 0)
{
putErrmsg("bpclock can't attach to BP.", NULL);
return 1;
}
sdr = getIonsdr();
bpConstants = getBpConstants();
isignal(SIGTERM, shutDown);
/* Main loop: wait for event occurrence time, then
* execute applicable events. */
oK(_running(&state));
writeMemo("[i] bpclock is running.");
while (_running(NULL))
{
/* Sleep for 1 second, then dispatch all events
* whose executions times have now been reached. */
snooze(1);
currentTime = getUTCTime();
if (dispatchEvents(sdr, bpConstants->timeline, currentTime) < 0)
{
putErrmsg("Can't dispatch events.", NULL);
state = 0; /* Terminate loop. */
oK(_running(&state));
continue;
}
/* Also adjust throttles in response to rate
* changes noted in the shared ION database. */
if (adjustThrottles() < 0)
{
putErrmsg("Can't adjust throttles.", NULL);
state = 0; /* Terminate loop. */
oK(_running(&state));
continue;
}
/* Then apply rate control. */
applyRateControl(sdr);
}
writeErrmsgMemos();
writeMemo("[i] bpclock has ended.");
ionDetach();
return 0;
}
int udplsi(int a1, int a2, int a3, int a4, int a5,
int a6, int a7, int a8, int a9, int a10)
{
char *endpointSpec = (char *) a1;
#else
int main(int argc, char *argv[])
{
char *endpointSpec = (argc > 1 ? argv[1] : NULL);
#endif
LtpVdb *vdb;
unsigned short portNbr = 0;
unsigned int ipAddress = INADDR_ANY;
struct sockaddr socketName;
struct sockaddr_in *inetName;
ReceiverThreadParms rtp;
socklen_t nameLength;
pthread_t receiverThread;
int fd;
char quit = '\0';
/* Note that ltpadmin must be run before the first
* invocation of ltplsi, to initialize the LTP database
* (as necessary) and dynamic database. */
if (ltpInit(0) < 0)
{
putErrmsg("udplsi can't initialize LTP.", NULL);
return 1;
}
vdb = getLtpVdb();
if (vdb->lsiPid != ERROR && vdb->lsiPid != sm_TaskIdSelf())
{
putErrmsg("LSI task is already started.", itoa(vdb->lsiPid));
return 1;
}
/* All command-line arguments are now validated. */
if (endpointSpec)
{
if(parseSocketSpec(endpointSpec, &portNbr, &ipAddress) != 0)
{
putErrmsg("Can't get IP/port for endpointSpec.",
endpointSpec);
return -1;
}
}
if (portNbr == 0)
{
portNbr = LtpUdpDefaultPortNbr;
}
portNbr = htons(portNbr);
ipAddress = htonl(ipAddress);
memset((char *) &socketName, 0, sizeof socketName);
inetName = (struct sockaddr_in *) &socketName;
inetName->sin_family = AF_INET;
inetName->sin_port = portNbr;
memcpy((char *) &(inetName->sin_addr.s_addr), (char *) &ipAddress, 4);
rtp.linkSocket = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
if (rtp.linkSocket < 0)
{
putSysErrmsg("LSI can't open UDP socket", NULL);
return -1;
}
nameLength = sizeof(struct sockaddr);
if (reUseAddress(rtp.linkSocket)
|| bind(rtp.linkSocket, &socketName, nameLength) < 0
|| getsockname(rtp.linkSocket, &socketName, &nameLength) < 0)
{
closesocket(rtp.linkSocket);
putSysErrmsg("Can't initialize socket", NULL);
return 1;
}
/* Set up signal handling; SIGTERM is shutdown signal. */
ionNoteMainThread("udplsi");
isignal(SIGTERM, interruptThread);
/* Start the receiver thread. */
rtp.running = 1;
if (pthread_begin(&receiverThread, NULL, handleDatagrams, &rtp))
{
closesocket(rtp.linkSocket);
putSysErrmsg("udplsi can't create receiver thread", NULL);
return 1;
}
/* Now sleep until interrupted by SIGTERM, at which point
* it's time to stop the link service. */
{
char txt[500];
isprintf(txt, sizeof(txt),
"[i] udplsi is running, spec=[%s:%d].",
inet_ntoa(inetName->sin_addr), ntohs(portNbr));
writeMemo(txt);
}
ionPauseMainThread(-1);
/* Time to shut down. */
rtp.running = 0;
/* Wake up the receiver thread by sending it a 1-byte
* datagram. */
fd = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
if (fd >= 0)
{
isendto(fd, &quit, 1, 0, &socketName, sizeof(struct sockaddr));
closesocket(fd);
}
pthread_join(receiverThread, NULL);
closesocket(rtp.linkSocket);
writeErrmsgMemos();
writeMemo("[i] udplsi has ended.");
ionDetach();
return 0;
}
int ltpclock(int a1, int a2, int a3, int a4, int a5,
int a6, int a7, int a8, int a9, int a10)
{
#else
int main(int argc, char *argv[])
{
#endif
Sdr sdr;
LtpDB *ltpConstants;
int state = 1;
time_t currentTime;
if (ltpInit(0, 0) < 0)
{
putErrmsg("ltpclock can't initialize LTP.", NULL);
return 1;
}
sdr = getIonsdr();
ltpConstants = getLtpConstants();
isignal(SIGTERM, shutDown);
/* Main loop: wait for event occurrence time, then
* execute applicable events. */
oK(_running(&state));
writeMemo("[i] ltpclock is running.");
while (_running(NULL))
{
/* Sleep for 1 second, then dispatch all events
* whose executions times have now been reached. */
snooze(1);
currentTime = getUTCTime();
/* Infer link state changes from rate changes
* noted in the shared ION database. */
if (manageLinks(sdr, currentTime) < 0)
{
putErrmsg("Can't manage links.", NULL);
state = 0; /* Terminate loop. */
oK(_running(&state));
continue;
}
/* Then dispatch retransmission events, as
* constrained by the new link state. */
if (dispatchEvents(sdr, ltpConstants->timeline, currentTime)
< 0)
{
putErrmsg("Can't dispatch events.", NULL);
state = 0; /* Terminate loop. */
oK(_running(&state));
continue;
}
}
writeErrmsgMemos();
writeMemo("[i] ltpclock has ended.");
ionDetach();
return 0;
}
int ltpcli(int a1, int a2, int a3, int a4, int a5,
int a6, int a7, int a8, int a9, int a10)
{
char *ductName = (char *) a1;
#else
int main(int argc, char *argv[])
{
char *ductName = (argc > 1 ? argv[1] : NULL);
#endif
VInduct *vduct;
PsmAddress vductElt;
ReceiverThreadParms rtp;
pthread_t receiverThread;
if (ductName == NULL)
{
PUTS("Usage: ltpcli <local engine number>]");
return 0;
}
if (bpAttach() < 0)
{
putErrmsg("ltpcli can't attach to BP.", NULL);
return -1;
}
findInduct("ltp", ductName, &vduct, &vductElt);
if (vductElt == 0)
{
putErrmsg("No such ltp duct.", ductName);
return -1;
}
if (vduct->cliPid != ERROR && vduct->cliPid != sm_TaskIdSelf())
{
putErrmsg("CLI task is already started for this duct.",
itoa(vduct->cliPid));
return -1;
}
/* All command-line arguments are now validated. */
if (ltp_attach() < 0)
{
putErrmsg("ltpcli can't initialize LTP.", NULL);
return -1;
}
/* Set up signal handling; SIGTERM is shutdown signal. */
ionNoteMainThread("ltpcli");
isignal(SIGTERM, interruptThread);
/* Start the receiver thread. */
rtp.vduct = vduct;
rtp.running = 1;
if (pthread_begin(&receiverThread, NULL, handleNotices, &rtp))
{
putSysErrmsg("ltpcli can't create receiver thread", NULL);
return 1;
}
/* Now sleep until interrupted by SIGTERM, at which point
* it's time to stop the induct. */
writeMemo("[i] ltpcli is running.");
ionPauseMainThread(-1);
/* Time to shut down. */
rtp.running = 0;
/* Stop the receiver thread by interrupting client access. */
ltp_interrupt(BpLtpClientId);
pthread_join(receiverThread, NULL);
writeErrmsgMemos();
writeMemo("[i] ltpcli duct has ended.");
ionDetach();
return 0;
}
int dtn2fw(int a1, int a2, int a3, int a4, int a5,
int a6, int a7, int a8, int a9, int a10)
{
#else
int main(int argc, char *argv[])
{
#endif
int running = 1;
Sdr sdr;
VScheme *vscheme;
PsmAddress vschemeElt;
Scheme scheme;
Object elt;
Object bundleAddr;
Bundle bundle;
if (bpAttach() < 0)
{
putErrmsg("dtn2fw can't attach to BP.", NULL);
return 1;
}
if (dtn2Init(NULL) < 0)
{
putErrmsg("dtn2fw can't load routing database.", NULL);
return 1;
}
sdr = getIonsdr();
findScheme("dtn", &vscheme, &vschemeElt);
if (vschemeElt == 0)
{
putErrmsg("Scheme name for dtn2 is unknown.", "dtn");
return 1;
}
CHKZERO(sdr_begin_xn(sdr));
sdr_read(sdr, (char *) &scheme, sdr_list_data(sdr,
vscheme->schemeElt), sizeof(Scheme));
sdr_exit_xn(sdr);
oK(_dtn2fwSemaphore(&vscheme->semaphore));
isignal(SIGTERM, shutDown);
/* Main loop: wait until forwarding queue is non-empty,
* then drain it. */
writeMemo("[i] dtn2fw is running.");
while (running && !(sm_SemEnded(vscheme->semaphore)))
{
/* We wrap forwarding in an SDR transaction to
* prevent race condition with bpclock (which
* is destroying bundles as their TTLs expire). */
CHKZERO(sdr_begin_xn(sdr));
elt = sdr_list_first(sdr, scheme.forwardQueue);
if (elt == 0) /* Wait for forwarding notice. */
{
sdr_exit_xn(sdr);
if (sm_SemTake(vscheme->semaphore) < 0)
{
putErrmsg("Can't take forwarder semaphore.",
NULL);
running = 0;
}
continue;
}
bundleAddr = (Object) sdr_list_data(sdr, elt);
sdr_stage(sdr, (char *) &bundle, bundleAddr, sizeof(Bundle));
sdr_list_delete(sdr, elt, NULL, NULL);
bundle.fwdQueueElt = 0;
/* Must rewrite bundle to note removal of
* fwdQueueElt, in case the bundle is abandoned
* and bpDestroyBundle re-reads it from the
* database. */
sdr_write(sdr, bundleAddr, (char *) &bundle, sizeof(Bundle));
if (enqueueBundle(&bundle, bundleAddr) < 0)
{
sdr_cancel_xn(sdr);
putErrmsg("Can't enqueue bundle.", NULL);
running = 0; /* Terminate loop. */
continue;
}
if (sdr_end_xn(sdr) < 0)
{
putErrmsg("Can't enqueue bundle.", NULL);
running = 0; /* Terminate loop. */
}
/* Make sure other tasks have a chance to run. */
sm_TaskYield();
}
writeErrmsgMemos();
writeMemo("[i] dtn2fw forwarder has ended.");
ionDetach();
return 0;
}
int stcpclo(int a1, int a2, int a3, int a4, int a5,
int a6, int a7, int a8, int a9, int a10)
{
char *ductName = (char *) a1;
#else
int main(int argc, char *argv[])
{
char *ductName = (argc > 1 ? argv[1] : NULL);
#endif
unsigned char *buffer;
VOutduct *vduct;
PsmAddress vductElt;
Sdr sdr;
Outduct duct;
ClProtocol protocol;
Outflow outflows[3];
int i;
char *hostName;
unsigned short portNbr;
unsigned int hostNbr;
struct sockaddr socketName;
struct sockaddr_in *inetName;
int running = 1;
pthread_mutex_t mutex;
KeepaliveThreadParms parms;
pthread_t keepaliveThread;
Object bundleZco;
BpExtendedCOS extendedCOS;
char destDuctName[MAX_CL_DUCT_NAME_LEN + 1];
unsigned int bundleLength;
int ductSocket = -1;
int bytesSent;
if (ductName == NULL)
{
PUTS("Usage: stcpclo <remote host name>[:<port number>]");
return 0;
}
if (bpAttach() < 0)
{
putErrmsg("stcpclo can't attach to BP.", NULL);
return -1;
}
buffer = MTAKE(TCPCLA_BUFSZ);
if (buffer == NULL)
{
putErrmsg("No memory for TCP buffer in stcpclo.", NULL);
return -1;
}
findOutduct("stcp", ductName, &vduct, &vductElt);
if (vductElt == 0)
{
putErrmsg("No such stcp duct.", ductName);
MRELEASE(buffer);
return -1;
}
if (vduct->cloPid > 0 && vduct->cloPid != sm_TaskIdSelf())
{
putErrmsg("CLO task is already started for this duct.",
itoa(vduct->cloPid));
MRELEASE(buffer);
return -1;
}
/* All command-line arguments are now validated. */
sdr = getIonsdr();
sdr_read(sdr, (char *) &duct, sdr_list_data(sdr, vduct->outductElt),
sizeof(Outduct));
sdr_read(sdr, (char *) &protocol, duct.protocol, sizeof(ClProtocol));
if (protocol.nominalRate <= 0)
{
vduct->xmitThrottle.nominalRate = DEFAULT_TCP_RATE;
}
else
{
vduct->xmitThrottle.nominalRate = protocol.nominalRate;
}
memset((char *) outflows, 0, sizeof outflows);
outflows[0].outboundBundles = duct.bulkQueue;
outflows[1].outboundBundles = duct.stdQueue;
outflows[2].outboundBundles = duct.urgentQueue;
for (i = 0; i < 3; i++)
{
outflows[i].svcFactor = 1 << i;
}
hostName = ductName;
parseSocketSpec(ductName, &portNbr, &hostNbr);
if (portNbr == 0)
{
portNbr = BpTcpDefaultPortNbr;
}
portNbr = htons(portNbr);
if (hostNbr == 0)
{
putErrmsg("Can't get IP address for host.", hostName);
MRELEASE(buffer);
return -1;
}
hostNbr = htonl(hostNbr);
memset((char *) &socketName, 0, sizeof socketName);
inetName = (struct sockaddr_in *) &socketName;
inetName->sin_family = AF_INET;
inetName->sin_port = portNbr;
memcpy((char *) &(inetName->sin_addr.s_addr), (char *) &hostNbr, 4);
/* Set up signal handling. SIGTERM is shutdown signal. */
oK(stcpcloSemaphore(&(vduct->semaphore)));
isignal(SIGTERM, shutDownClo);
isignal(SIGPIPE, handleConnectionLoss);
/* Start the keepalive thread for the eventual connection. */
parms.cloRunning = &running;
pthread_mutex_init(&mutex, NULL);
parms.mutex = &mutex;
parms.socketName = &socketName;
parms.ductSocket = &ductSocket;
if (pthread_create(&keepaliveThread, NULL, sendKeepalives, &parms))
{
putSysErrmsg("stcpclo can't create keepalive thread", NULL);
MRELEASE(buffer);
pthread_mutex_destroy(&mutex);
return 1;
}
/* Can now begin transmitting to remote duct. */
writeMemo("[i] stcpclo is running.");
while (!(sm_SemEnded(stcpcloSemaphore(NULL))))
{
if (bpDequeue(vduct, outflows, &bundleZco, &extendedCOS,
destDuctName) < 0)
{
sm_SemEnd(stcpcloSemaphore(NULL));/* Stop. */
continue;
}
if (bundleZco == 0) /* Interrupted. */
{
continue;
}
bundleLength = zco_length(sdr, bundleZco);
pthread_mutex_lock(&mutex);
bytesSent = sendBundleByTCP(&socketName, &ductSocket,
bundleLength, bundleZco, buffer);
pthread_mutex_unlock(&mutex);
if (bytesSent < bundleLength)
{
sm_SemEnd(stcpcloSemaphore(NULL));/* Stop. */
continue;
}
/* Make sure other tasks have a chance to run. */
sm_TaskYield();
}
running = 0; /* Terminate keepalive. */
pthread_join(keepaliveThread, NULL);
if (ductSocket != -1)
{
close(ductSocket);
}
pthread_mutex_destroy(&mutex);
writeErrmsgMemos();
writeMemo("[i] stcpclo duct has ended.");
MRELEASE(buffer);
ionDetach();
return 0;
}
static int run_imcadmin(char *cmdFileName)
{
int cmdFile;
char line[256];
int len;
if (bpAttach() < 0)
{
putErrmsg("imcadmin can't attach to BP.", NULL);
return -1;
}
if (imcInit() < 0)
{
putErrmsg("imcadmin can't initialize IMC database.", NULL);
return -1;
}
if (cmdFileName == NULL) /* Interactive. */
{
#ifdef FSWLOGGER
return 0;
#else
cmdFile = fileno(stdin);
isignal(SIGINT, handleQuit);
while (1)
{
printf(": ");
fflush(stdout);
if (igets(cmdFile, line, sizeof line, &len) == NULL)
{
if (len == 0)
{
break;
}
putErrmsg("igets failed.", NULL);
break; /* Out of loop. */
}
if (len == 0)
{
continue;
}
if (processLine(line, len))
{
break; /* Out of loop. */
}
}
#endif
}
else /* Scripted. */
{
cmdFile = iopen(cmdFileName, O_RDONLY, 0777);
if (cmdFile < 0)
{
PERROR("Can't open command file");
}
else
{
while (1)
{
if (igets(cmdFile, line, sizeof line, &len)
== NULL)
{
if (len == 0)
{
break; /* Loop. */
}
putErrmsg("igets failed.", NULL);
break; /* Loop. */
}
if (len == 0
|| line[0] == '#') /* Comment.*/
{
continue;
}
if (processLine(line, len))
{
break; /* Out of loop. */
}
}
close(cmdFile);
}
}
writeErrmsgMemos();
printText("Stopping imcadmin.");
ionDetach();
return 0;
}
int pmqlso(int a1, int a2, int a3, int a4, int a5,
int a6, int a7, int a8, int a9, int a10)
{
char *mqName = (char *) a1;
uvast remoteEngineId = a2 != 0 ? strtouvast((char *) a2) : 0;
#else
int main(int argc, char *argv[])
{
char *mqName = argc > 1 ? argv[1] : NULL;
uvast remoteEngineId = argc > 2 ? strtouvast(argv[2]) : 0;
#endif
Sdr sdr;
LtpVspan *vspan;
PsmAddress vspanElt;
struct mq_attr mqAttributes = { 0, PMQLSA_MAXMSG, PMQLSA_MSGSIZE, 0 };
mqd_t mq;
int running;
int segmentLength;
char *segment;
if (remoteEngineId == 0 || mqName == NULL)
{
puts("Usage: pmqlso <message queue name> <remote engine ID>");
return 0;
}
/* Note that ltpadmin must be run before the first
* invocation of ltplso, to initialize the LTP database
* (as necessary) and dynamic database. */
if (ltpInit(0) < 0)
{
putErrmsg("pmqlso can't initialize LTP.", NULL);
return 1;
}
sdr = getIonsdr();
CHKERR(sdr_begin_xn(sdr)); /* Just to lock memory. */
findSpan(remoteEngineId, &vspan, &vspanElt);
if (vspanElt == 0)
{
sdr_exit_xn(sdr);
putErrmsg("No such engine in database.", itoa(remoteEngineId));
return 1;
}
if (vspan->lsoPid > 0 && vspan->lsoPid != sm_TaskIdSelf())
{
sdr_exit_xn(sdr);
putErrmsg("LSO task is already started for this span.",
itoa(vspan->lsoPid));
return 1;
}
/* All command-line arguments are now validated. */
sdr_exit_xn(sdr);
mq = mq_open(mqName, O_RDWR | O_CREAT, 0777, &mqAttributes);
if (mq == (mqd_t) -1)
{
putSysErrmsg("pmqlso can't open message queue", mqName);
return 1;
}
oK(_pmqlsoSemaphore(&vspan->segSemaphore));
isignal(SIGTERM, interruptThread);
/* Can now begin transmitting to remote engine. */
writeMemo("[i] pmqlso is running.");
running = 1;
while (running && !(sm_SemEnded(_pmqlsoSemaphore(NULL))))
{
segmentLength = ltpDequeueOutboundSegment(vspan, &segment);
if (segmentLength < 0)
{
running = 0; /* Terminate LSO. */
continue;
}
if (segmentLength == 0) /* Interrupted. */
{
continue;
}
if (segmentLength > PMQLSA_MSGSIZE)
{
putErrmsg("Segment is too big for PMQ LSO.",
itoa(segmentLength));
running = 0; /* Terminate LSO. */
continue;
}
if (sendSegmentByPMQ(mq, segment, segmentLength) < 0)
{
putSysErrmsg("pmqlso failed sending segment", mqName);
running = 0; /* Terminate LSO. */
continue;
}
/* Make sure other tasks have a chance to run. */
sm_TaskYield();
}
mq_close(mq);
writeErrmsgMemos();
writeMemo("[i] pmqlso duct has ended.");
ionDetach();
return 0;
}
int bsspclo(int a1, int a2, int a3, int a4, int a5,
int a6, int a7, int a8, int a9, int a10)
{
char *ductName = (char *) a1;
#else
int main(int argc, char *argv[])
{
char *ductName = (argc > 1 ? argv[1] : NULL);
#endif
Sdr sdr;
VOutduct *vduct;
PsmAddress vductElt;
vast destEngineNbr;
Outduct outduct;
ClProtocol protocol;
Outflow outflows[3];
int i;
int running = 1;
Object bundleZco;
BpExtendedCOS extendedCOS;
char destDuctName[MAX_CL_DUCT_NAME_LEN + 1];
BsspSessionId sessionId;
unsigned char *buffer;
Lyst streams;
Bundle bundleImage;
char *dictionary = 0;
unsigned int bundleLength;
if (ductName == NULL)
{
PUTS("Usage: bsspclo [-]<destination engine number>");
return 0;
}
if (bpAttach() < 0)
{
putErrmsg("bsspclo can't attach to BP.", NULL);
return -1;
}
sdr = getIonsdr();
findOutduct("bssp", ductName, &vduct, &vductElt);
if (vductElt == 0)
{
putErrmsg("No such bssp duct.", ductName);
return -1;
}
if (vduct->cloPid != ERROR && vduct->cloPid != sm_TaskIdSelf())
{
putErrmsg("BSSPCLO task is already started for this duct.",
itoa(vduct->cloPid));
return -1;
}
/* All command-line arguments are now validated. */
buffer = (unsigned char *) MTAKE(BP_MAX_BLOCK_SIZE);
if (buffer == NULL)
{
putErrmsg("Can't get buffer for decoding bundle ZCOs.", NULL);
return -1;
}
streams = lyst_create_using(getIonMemoryMgr());
if (streams == NULL)
{
putErrmsg("Can't create lyst of streams.", NULL);
MRELEASE(buffer);
return -1;
}
lyst_delete_set(streams, eraseStream, NULL);
CHKERR(sdr_begin_xn(sdr));
sdr_read(sdr, (char *) &outduct, sdr_list_data(sdr, vduct->outductElt),
sizeof(Outduct));
sdr_read(sdr, (char *) &protocol, outduct.protocol, sizeof(ClProtocol));
sdr_exit_xn(sdr);
destEngineNbr = strtovast(ductName);
if (protocol.nominalRate == 0)
{
vduct->xmitThrottle.nominalRate = DEFAULT_BSSP_RATE;
}
else
{
vduct->xmitThrottle.nominalRate = protocol.nominalRate;
}
memset((char *) outflows, 0, sizeof outflows);
outflows[0].outboundBundles = outduct.bulkQueue;
outflows[1].outboundBundles = outduct.stdQueue;
outflows[2].outboundBundles = outduct.urgentQueue;
for (i = 0; i < 3; i++)
{
outflows[i].svcFactor = 1 << i;
}
if (bssp_attach() < 0)
{
putErrmsg("bsspclo can't initialize BSSP.", NULL);
lyst_destroy(streams);
MRELEASE(buffer);
return -1;
}
/* Set up signal handling. SIGTERM is shutdown signal. */
oK(bsspcloSemaphore(&(vduct->semaphore)));
isignal(SIGTERM, shutDownClo);
/* Can now begin transmitting to remote duct. */
writeMemo("[i] bsspclo is running.");
while (running && !(sm_SemEnded(bsspcloSemaphore(NULL))))
{
if (bpDequeue(vduct, outflows, &bundleZco, &extendedCOS,
destDuctName, 0, -1) < 0)
{
running = 0; /* Terminate CLO. */
continue;
}
if (bundleZco == 0) /* Interrupted. */
{
continue;
}
if (decodeBundle(sdr, bundleZco, buffer, &bundleImage,
&dictionary, &bundleLength) < 0)
{
putErrmsg("Can't decode bundle ZCO.", NULL);
CHKERR(sdr_begin_xn(sdr));
zco_destroy(sdr, bundleZco);
if (sdr_end_xn(sdr) < 0)
{
putErrmsg("Failed destroying ZCO.", NULL);
break;
}
continue;
}
switch (bssp_send(destEngineNbr, BpBsspClientId, bundleZco,
isInOrder(streams, &bundleImage), &sessionId))
{
case 0:
putErrmsg("Unable to send this bundle via BSSP.", NULL);
break;
case -1:
putErrmsg("BsspSend failed.", NULL);
running = 0; /* Terminate CLO. */
}
/* Make sure other tasks have a chance to run. */
sm_TaskYield();
/* Note: bundleZco is destroyed later, when BSSP's
* ExportSession is closed following transmission
* of bundle ZCOs as aggregated into a block. */
}
writeErrmsgMemos();
writeMemo("[i] bsspclo duct has ended.");
lyst_destroy(streams);
MRELEASE(buffer);
ionDetach();
return 0;
}
int udpclo(int a1, int a2, int a3, int a4, int a5,
int a6, int a7, int a8, int a9, int a10)
{
#else
int main(int argc, char *argv[])
{
#endif
unsigned char *buffer;
VOutduct *vduct;
PsmAddress vductElt;
Sdr sdr;
Outduct outduct;
ClProtocol protocol;
Outflow outflows[3];
int i;
char *hostName;
unsigned short portNbr;
unsigned int hostNbr;
struct sockaddr socketName;
struct sockaddr_in *inetName;
Object bundleZco;
BpExtendedCOS extendedCOS;
char destDuctName[MAX_CL_DUCT_NAME_LEN + 1];
unsigned int bundleLength;
int ductSocket = -1;
int bytesSent;
if (bpAttach() < 0)
{
putErrmsg("udpclo can't attach to BP.", NULL);
return -1;
}
buffer = MTAKE(UDPCLA_BUFSZ);
if (buffer == NULL)
{
putErrmsg("No memory for UDP buffer in udpclo.", NULL);
return -1;
}
findOutduct("udp", "*", &vduct, &vductElt);
if (vductElt == 0)
{
putErrmsg("No such udp duct.", "*");
MRELEASE(buffer);
return -1;
}
if (vduct->cloPid > 0 && vduct->cloPid != sm_TaskIdSelf())
{
putErrmsg("CLO task is already started for this duct.",
itoa(vduct->cloPid));
MRELEASE(buffer);
return -1;
}
/* All command-line arguments are now validated. */
sdr = getIonsdr();
sdr_read(sdr, (char *) &outduct, sdr_list_data(sdr, vduct->outductElt),
sizeof(Outduct));
sdr_read(sdr, (char *) &protocol, outduct.protocol, sizeof(ClProtocol));
if (protocol.nominalRate <= 0)
{
vduct->xmitThrottle.nominalRate = DEFAULT_UDP_RATE;
}
else
{
vduct->xmitThrottle.nominalRate = protocol.nominalRate;
}
memset((char *) outflows, 0, sizeof outflows);
outflows[0].outboundBundles = outduct.bulkQueue;
outflows[1].outboundBundles = outduct.stdQueue;
outflows[2].outboundBundles = outduct.urgentQueue;
for (i = 0; i < 3; i++)
{
outflows[i].svcFactor = 1 << i;
}
/* Set up signal handling. SIGTERM is shutdown signal. */
oK(udpcloSemaphore(&(vduct->semaphore)));
isignal(SIGTERM, shutDownClo);
/* Can now begin transmitting to remote duct. */
writeMemo("[i] udpclo is running.");
while (!(sm_SemEnded(vduct->semaphore)))
{
if (bpDequeue(vduct, outflows, &bundleZco, &extendedCOS,
destDuctName) < 0)
{
sm_SemEnd(udpcloSemaphore(NULL));/* Stop. */
continue;
}
if (bundleZco == 0) /* Interrupted. */
{
continue;
}
hostName = destDuctName;
parseSocketSpec(destDuctName, &portNbr, &hostNbr);
if (portNbr == 0)
{
portNbr = BpUdpDefaultPortNbr;
}
portNbr = htons(portNbr);
if (hostNbr == 0)
{
writeMemoNote("[?] Can't get IP address for host",
hostName);
}
hostNbr = htonl(hostNbr);
memset((char *) &socketName, 0, sizeof socketName);
inetName = (struct sockaddr_in *) &socketName;
inetName->sin_family = AF_INET;
inetName->sin_port = portNbr;
memcpy((char *) &(inetName->sin_addr.s_addr),
(char *) &hostNbr, 4);
bundleLength = zco_length(sdr, bundleZco);
bytesSent = sendBundleByUDP(&socketName, &ductSocket,
bundleLength, bundleZco, buffer);
if (bytesSent < bundleLength)
{
sm_SemEnd(udpcloSemaphore(NULL));/* Stop. */
continue;
}
/* Make sure other tasks have a chance to run. */
sm_TaskYield();
}
if (ductSocket != -1)
{
close(ductSocket);
}
writeErrmsgMemos();
writeMemo("[i] udpclo duct has ended.");
MRELEASE(buffer);
ionDetach();
return 0;
}
