C++ (Cpp) iota_gfx_init Exemples

Exemple #1

Fichier : keymap.c Projet : Xyverz/qmk_firmware

void matrix_init_user(void) {
    #ifdef RGBLIGHT_ENABLE
      RGB_current_mode = rgblight_config.mode;
    #endif
    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
    #ifdef SSD1306OLED
      #ifdef SSD1306_128X64
        iota_gfx_init(false);   // turns on the display
      #else
        iota_gfx_init(!has_usb());   // turns on the display
      #endif
    #endif
}

Exemple #2

Fichier : keymap.c Projet : chocoball/qmk_firmware

void matrix_init_user(void) {
    #ifdef AUDIO_ENABLE
        startup_user();
    #endif
    #ifdef RGBLIGHT_ENABLE
      RGB_current_mode = rgblight_config.mode;
    #endif
    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
    #ifdef SSD1306OLED
        iota_gfx_init(!has_usb());   // turns on the display
    #endif
}

Exemple #3

Fichier : keymap.c Projet : j-chan-hkust/qmk_firmware

void matrix_init_user(void) {
    #ifdef AUDIO_ENABLE
        startup_user();
    #endif
    #ifdef RGBLIGHT_ENABLE
      RGB_current_mode = rgblight_config.mode;
    #endif
    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
    #ifdef SSD1306OLED
        TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
        iota_gfx_init(!has_usb());   // turns on the display
    #endif
}

Exemple #4

Fichier : keymap.c Projet : 0tsuki/qmk_firmware

void matrix_init_user(void) {
  #ifdef USE_I2C
    i2c_master_init();
  #ifdef SSD1306OLED
  // calls code for the SSD1306 OLED
        _delay_ms(400);
        TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
        iota_gfx_init();   // turns on the display
  #endif
  #endif
    #ifdef AUDIO_ENABLE
        startup_user();
    #endif
}

Exemple #5

Fichier : keymap.c Projet : bellwood4486/qmk_firmware

void matrix_init_keymap(void) {
    #ifdef RGBLIGHT_ENABLE
      RGB_current_mode = rgblight_config.mode;
    #endif
    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
    #ifdef SSD1306OLED
        iota_gfx_init(!has_usb());   // turns on the display
    #endif

  DDRD &= ~(1<<5);
  PORTD &= ~(1<<5);

  DDRB &= ~(1<<0);
  PORTB &= ~(1<<0);}

Exemple #6

Fichier : keymap.c Projet : 0xdec/qmk_firmware

void matrix_init_keymap(void) {
  //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
  iota_gfx_init(!has_usb());   // turns on the display
}

Exemple #7

Fichier : keymap.c Projet : Talljoe/qmk_firmware

void matrix_master_OLED_init (void) {
    TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
    iota_gfx_init(0);   // turns on the display
}