bool FlosIDSAdaptor::startCapture()
{
if(!isOpen()) {
return false;
}
UINT nMode;
INT nRet = IS_SUCCESS;
double dNominal = 128;
double dEnable = 1;
is_SetDisplayMode(m_deviceID, IS_SET_DM_DIB);
is_SetExternalTrigger(m_deviceID, IS_SET_TRIGGER_SOFTWARE);
nMode = IO_FLASH_MODE_TRIGGER_HI_ACTIVE;
is_IO(m_deviceID, IS_IO_CMD_FLASH_SET_MODE, (void *)&nMode, sizeof(nMode));
is_SetAutoParameter(m_deviceID, IS_SET_ENABLE_AUTO_GAIN, &dEnable, 0);
is_SetAutoParameter(m_deviceID, IS_SET_AUTO_REFERENCE, &dNominal, 0);
is_SetColorMode(m_deviceID, IS_CM_BGR8_PACKED);
is_SetFrameRate(m_deviceID, 20, NULL);
if((is_CaptureVideo(m_deviceID, IS_DONT_WAIT) != IS_SUCCESS)) {
imaqkit::adaptorWarn("FlosIDSAdaptor:startCapture", "Could not start capturing.");
return false;
}
setAcquisitionActive(true);
PostThreadMessage(m_acquireThreadID, WM_USER, 0, 0);
return true;
}
INT UEyeCamDriver::connectCam(int new_cam_ID) {
INT is_err = IS_SUCCESS;
int numCameras;
// Terminate any existing opened cameras
setStandbyMode();
// Updates camera ID if specified.
if (new_cam_ID >= 0) {
cam_id_ = new_cam_ID;
}
// Query for number of connected cameras
if ((is_err = is_GetNumberOfCameras(&numCameras)) != IS_SUCCESS) {
std::cerr << "Failed query for number of connected UEye cameras ("
<< err2str(is_err) << ")" << std::endl;
return is_err;
} else if (numCameras < 1) {
std::cerr << "No UEye cameras are connected" << std::endl;
return IS_NO_SUCCESS;
} // NOTE: previously checked if ID < numCameras, but turns out that ID can be arbitrary
// Attempt to open camera handle, and handle case where camera requires a
// mandatory firmware upload
cam_handle_ = (HIDS) cam_id_;
if ((is_err = is_InitCamera(&cam_handle_, NULL)) == IS_STARTER_FW_UPLOAD_NEEDED) {
INT uploadTimeMSEC = 25000;
is_GetDuration(cam_handle_, IS_STARTER_FW_UPLOAD, &uploadTimeMSEC);
std::cout << "Uploading new firmware to UEye camera '" << cam_name_
<< "'; please wait for about " << uploadTimeMSEC / 1000.0
<< " seconds" << std::endl;
// Attempt to re-open camera handle while triggering automatic firmware upload
cam_handle_ = (HIDS) (((INT) cam_handle_) | IS_ALLOW_STARTER_FW_UPLOAD);
is_err = is_InitCamera(&cam_handle_, NULL); // Will block for N seconds
}
if (is_err != IS_SUCCESS) {
std::cerr << "Could not open UEye camera ID " << cam_id_ << " ("
<< err2str(is_err) << ")" << std::endl;
return is_err;
}
// Set display mode to Device Independent Bitmap (DIB)
is_err = is_SetDisplayMode(cam_handle_, IS_SET_DM_DIB);
// Fetch sensor parameters
is_err = is_GetSensorInfo(cam_handle_, &cam_sensor_info_);
// Initialize local camera frame buffer
reallocateCamBuffer();
return is_err;
}
///////////////////////////////////////////////////////////////////////////////
//
// METHOD CIdsSimpleLiveDlg::InitDisplayMode()
//
// DESCRIPTION: - initializes the display mode
//
///////////////////////////////////////////////////////////////////////////////
int InitDisplayMode(HIDS* m_hCam)
{
INT result = IS_SUCCESS;
INT nColorMode; // Y8/RGB16/RGB24/REG32
if (m_hCam == NULL) {
return IS_NO_SUCCESS;
}
// Get sensor info
SENSORINFO m_sInfo; // sensor information struct
is_GetSensorInfo(*m_hCam, &m_sInfo);
if (m_pcImageMemory != NULL) {
is_FreeImageMem( *m_hCam, m_pcImageMemory, m_lMemoryId );
}
m_pcImageMemory = NULL;
// Set display mode to DIB
result = is_SetDisplayMode(*m_hCam, IS_SET_DM_DIB);
if (m_sInfo.nColorMode == IS_COLORMODE_BAYER) {
// setup the color depth to the current windows setting
is_GetColorDepth(*m_hCam, &m_nBitsPerPixel, &nColorMode);
} else if (m_sInfo.nColorMode == IS_COLORMODE_CBYCRY) {
// for color camera models use RGB32 mode
nColorMode = IS_CM_RGB8_PACKED;
m_nBitsPerPixel = 32;
} else {
// for monochrome camera models use Y8 mode
nColorMode = IS_CM_MONO8;
m_nBitsPerPixel = 8;
}
// allocate an image memory.
if (is_AllocImageMem(*m_hCam, m_nSizeX, m_nSizeY, m_nBitsPerPixel, &m_pcImageMemory, &m_lMemoryId ) != IS_SUCCESS) {
AfxMessageBox(TEXT("Memory allocation failed!"), MB_ICONWARNING );
} else {
is_SetImageMem( *m_hCam, m_pcImageMemory, m_lMemoryId );
}
if (result == IS_SUCCESS) {
// set the desired color mode
result = is_SetColorMode(*m_hCam, nColorMode);
// Sets the position and size of the image by using an object of the IS_RECT type.
IS_RECT rectAOI;
rectAOI.s32X = 0;
rectAOI.s32Y = 0;
rectAOI.s32Width = m_nSizeX;
rectAOI.s32Height = m_nSizeY;
result |= is_AOI(*m_hCam, IS_AOI_IMAGE_SET_AOI, (void*)&rectAOI, sizeof(rectAOI));
}
return result;
}
int CameraApi::openCamera()
{
int is_init = IS_NO_SUCCESS;
int is_mode = IS_NO_SUCCESS;
int is_alcM = IS_NO_SUCCESS;
int isLoad = IS_NO_SUCCESS;
is_init = is_InitCamera(&mhCam, 0);
if(is_init == IS_SUCCESS)
{
is_mode = is_SetDisplayMode(mhCam, IS_SET_DM_DIB);
}
if(is_mode == IS_SUCCESS)
{
ringbuffer = new char* [ringbufferSize];
ringbufferId = new int [ringbufferSize];
IS_SIZE_2D maxAoi;
is_AOI(mhCam, IS_AOI_IMAGE_GET_SIZE_MAX, &maxAoi, sizeof(maxAoi));
for(int i=0; i<ringbufferSize; i++)
{
is_AllocImageMem(mhCam, maxAoi.s32Width, maxAoi.s32Height, bitspixel(), &ringbuffer[i], &ringbufferId[i]);
is_AddToSequence(mhCam, ringbuffer[i], ringbufferId[i]);
}
isLoad = is_LoadParameters(mhCam, "cameraParameter.ini");
setAoi(0, 0, width(), height());
is_SetExternalTrigger(mhCam, IS_SET_TRIGGER_OFF);
is_CaptureVideo(mhCam, IS_WAIT);
}
if(isLoad == IS_SUCCESS)
return IS_SUCCESS;
else
return IS_NO_SUCCESS;
}
bool IdsSourceSink::Init()
{
PUEYE_CAMERA_LIST m_pCamList;
UEYE_CAMERA_INFO m_CameraInfo;
// init the internal camera info structure
ZeroMemory (&m_CameraInfo, sizeof(UEYE_CAMERA_INFO));
// get the cameralist from SDK
m_pCamList = new UEYE_CAMERA_LIST;
m_pCamList->dwCount = 0;
if (is_GetCameraList (m_pCamList) == IS_SUCCESS) {
DWORD dw = m_pCamList->dwCount;
delete m_pCamList;
// Reallocate the required camera list size
m_pCamList = (PUEYE_CAMERA_LIST)new char[sizeof(DWORD) + dw * sizeof(UEYE_CAMERA_INFO)];
m_pCamList->dwCount = dw;
// Get CameraList and store it ...
if (is_GetCameraList (m_pCamList) != IS_SUCCESS) return false;
} else return false;
if (m_pCamList->dwCount==0) {
qDebug()<<"No camera found";
return false;
} else if (m_pCamList->dwCount>1) {
qDebug()<<"More than 1 camera: "<<m_pCamList->dwCount;
}
// will use camera 0
memcpy (&m_CameraInfo, &m_pCamList->uci[0], sizeof(UEYE_CAMERA_INFO));
hCam = (HIDS) (m_CameraInfo.dwDeviceID | IS_USE_DEVICE_ID);
if(is_InitCamera (&hCam, NULL)!= IS_SUCCESS){
qDebug()<<"init not successful";
return false;
}
// double minFPS, maxFPS, FPSinterval;
// is_GetFrameTimeRange (hCam, &minFPS, &maxFPS, &FPSinterval);
//cout<< fixed << setprecision(4) << minFPS << " MINFPS " << maxFPS << " MAXFPS "<< FPSinterval << " FPSinterval " << endl;
//myfile<< fixed << setprecision(4) << minFPS << " MINFPS " << maxFPS << " MAXFPS "<< FPSinterval << " FPSinterval " << endl;
is_SetGainBoost (hCam, IS_SET_GAINBOOST_OFF);
is_SetWhiteBalance (hCam, IS_SET_WB_DISABLE);
// is_SetBrightness (hCam,0);
// is_SetContrast (hCam,0);
// is_SetGamma (hCam, 100);// Value multiplied by 100 (for the camera it goes from 0.01 to 10
is_SetHWGainFactor (hCam, IS_SET_MASTER_GAIN_FACTOR, 100);
uint pixelC=304;
is_PixelClock(hCam, IS_PIXELCLOCK_CMD_SET, (void*)&pixelC, sizeof(pixelC));
flagIDS= is_SetSubSampling (hCam, IS_SUBSAMPLING_2X_VERTICAL | IS_SUBSAMPLING_2X_HORIZONTAL); //Both are needed
//Configuration section: very important to match the img_bpp=8 with the chacracteristics of the CV::MAT image to use
//weird results like cropping or black lines can be obtained if not changed accordingly
int img_width=2048, img_height=2048, img_bpp=8, factorSMP=2; //Variable to state the Linehopping
// int img_step, img_data_size;
imgMem = NULL;
is_AllocImageMem(hCam, img_width/factorSMP, img_height/factorSMP, img_bpp, &imgMem, &memId);
is_SetImageMem (hCam, imgMem, memId);
// is_SetImageSize (hCam, img_width/factorSMP, img_height/factorSMP);
is_SetColorMode (hCam, IS_CM_MONO8);
is_SetDisplayMode (hCam, IS_SET_DM_DIB); // Direct buffer mode writes to RAM which is the only option on Linux
//OpenCV variables: REMEMBER THE SUBSAMPLING
buffer=cv::Mat::zeros(img_width/factorSMP,img_height/factorSMP, CV_8UC1);
return true;
}
//Open our camera
bool IDSCamera::OpenCamera()
{
if (m_hCam!=0)
{
//free old image mem.
is_FreeImageMem(m_hCam,m_pcImageMemory,m_lMemoryId);
is_ExitCamera(m_hCam);
}
// init camera
m_hCam = (HIDS) 0; // open next camera
m_Ret = is_InitCamera(&m_hCam,NULL); // init camera
if( m_Ret == IS_SUCCESS ){
// retrieve original image size
SENSORINFO sInfo;
is_GetSensorInfo(m_hCam,&sInfo);
m_nSizeX = sInfo.nMaxWidth;
m_nSizeY = sInfo.nMaxHeight;
// setup the color depth to the current windows setting
//is_GetColorDepth(m_hCam,&m_nBitsPerPixel,&m_nColorMode);
is_SetColorMode(m_hCam, IS_SET_CM_Y8);
//printf("m_nBitsPerPixel=%i m_nColorMode=%i\n",m_nBitsPerPixel,IS_SET_CM_Y8);
// memory initialization
is_AllocImageMem(m_hCam, m_nSizeX, m_nSizeY, m_nBitsPerPixel, &m_pcImageMemory, &m_lMemoryId);
//set memory active
is_SetImageMem( m_hCam, m_pcImageMemory,m_lMemoryId );
// display initialization
is_SetImageSize( m_hCam, m_nSizeX, m_nSizeY );
is_SetDisplayMode( m_hCam, IS_SET_DM_DIB);
// Reinit with slower frame rate for testing on vmWare with USB 1.1
if( is_LoadParameters( m_hCam, config_file ) == IS_SUCCESS )
{
// realloc image mem with actual sizes and depth.
is_FreeImageMem( m_hCam, m_pcImageMemory, m_lMemoryId );
m_nSizeX = is_SetImageSize( m_hCam, IS_GET_IMAGE_SIZE_X, 0 );
m_nSizeY = is_SetImageSize( m_hCam, IS_GET_IMAGE_SIZE_Y, 0 );
switch( is_SetColorMode( m_hCam, IS_GET_COLOR_MODE ) )
{
case IS_SET_CM_RGB32:
m_nBitsPerPixel = 32;
break;
case IS_SET_CM_RGB24:
m_nBitsPerPixel = 24;
break;
case IS_SET_CM_RGB16:
case IS_SET_CM_UYVY:
m_nBitsPerPixel = 16;
break;
case IS_SET_CM_RGB15:
m_nBitsPerPixel = 15;
break;
case IS_SET_CM_Y8:
case IS_SET_CM_RGB8:
case IS_SET_CM_BAYER:
default:
m_nBitsPerPixel = 8;
break;
}
// memory initialization
is_AllocImageMem( m_hCam,
m_nSizeX,
m_nSizeY,
m_nBitsPerPixel,
&m_pcImageMemory,
&m_lMemoryId);
is_SetImageMem(m_hCam, m_pcImageMemory, m_lMemoryId ); // set memory active
// display initialization
is_SetImageSize(m_hCam, m_nSizeX, m_nSizeY );
}
}
return true;
}
void get_en_image(pcl::PointCloud<pcl::PointXYZ> &cloud)
{
char flag = 'g';
int i = 0;
while(flag != 'q')
{
ostringstream conv;
conv << i;
cout<<"Capturing new calibration image from the ensenso stereo vision camera."<<endl;
///Read the Ensenso stereo cameras:
try {
// Initialize NxLib and enumerate cameras
nxLibInitialize(true);
// Reference to the first camera in the node BySerialNo
NxLibItem root;
NxLibItem camera = root[itmCameras][itmBySerialNo][0];
// Open the Ensenso
NxLibCommand open(cmdOpen);
open.parameters()[itmCameras] = camera[itmSerialNumber].asString();
open.execute();
// Capture an image
NxLibCommand (cmdCapture).execute();
// Stereo matching task
NxLibCommand (cmdComputeDisparityMap).execute ();
// Convert disparity map into XYZ data for each pixel
NxLibCommand (cmdComputePointMap).execute ();
// Get info about the computed point map and copy it into a std::vector
double timestamp;
std::vector<float> pointMap;
int width, height;
camera[itmImages][itmRaw][itmLeft].getBinaryDataInfo (0, 0, 0, 0, 0, ×tamp); // Get raw image timestamp
camera[itmImages][itmPointMap].getBinaryDataInfo (&width, &height, 0, 0, 0, 0);
camera[itmImages][itmPointMap].getBinaryData (pointMap, 0);
// Copy point cloud and convert in meters
//cloud.header.stamp = getPCLStamp (timestamp);
cloud.resize (height * width);
cloud.width = width;
cloud.height = height;
cloud.is_dense = false;
// Copy data in point cloud (and convert milimeters in meters)
for (size_t i = 0; i < pointMap.size (); i += 3)
{
cloud.points[i / 3].x = pointMap[i] / 1000.0;
cloud.points[i / 3].y = pointMap[i + 1] / 1000.0;
cloud.points[i / 3].z = pointMap[i + 2] / 1000.0;
}
NxLibCommand (cmdRectifyImages).execute();
// Save images
NxLibCommand saveImage(cmdSaveImage);
// raw left
saveImage.parameters()[itmNode] = camera[itmImages][itmRaw][itmLeft].path;
saveImage.parameters()[itmFilename] = "calib_en/raw_left" + conv.str()+".png";
saveImage.execute();
// raw right
/*saveImage.parameters()[itmNode] = camera[itmImages][itmRaw][itmRight].path;
saveImage.parameters()[itmFilename] = "calib_en/raw_right.png";
saveImage.execute();
// rectified left
saveImage.parameters()[itmNode] = camera[itmImages][itmRectified][itmLeft].path;
saveImage.parameters()[itmFilename] = "calib_en/rectified_left.png";
saveImage.execute();
// rectified right
saveImage.parameters()[itmNode] = camera[itmImages][itmRectified][itmRight].path;
saveImage.parameters()[itmFilename] = "calib_en/rectified_right.png";
saveImage.execute();*/
} catch (NxLibException& e) { // Display NxLib API exceptions, if any
printf("An NxLib API error with code %d (%s) occurred while accessing item %s.\n", e.getErrorCode(), e.getErrorText().c_str(), e.getItemPath().c_str());
if (e.getErrorCode() == NxLibExecutionFailed) printf("/Execute:\n%s\n", NxLibItem(itmExecute).asJson(true).c_str());
}
/*catch (NxLibException &ex)
{
ensensoExceptionHandling (ex, "grabSingleCloud");
}*/
catch (...) { // Display other exceptions
printf("Something, somewhere went terribly wrong!\n");
}
/*cout<<"Plug in the RGB camera and press any key to continue."<<endl;
cin.ignore();
cin.get();*/
cout<<"Capturing new calibration image from the ensenso RGB camera."<<endl;
///Read the IDS RGB Camera attached to the Ensenso stereo camera
HIDS hCam = 0;
printf("Success-Code: %d\n",IS_SUCCESS);
//Kamera öffnen
INT nRet = is_InitCamera (&hCam, NULL);
printf("Status Init %d\n",nRet);
//Pixel-Clock setzen
UINT nPixelClockDefault = 9;
nRet = is_PixelClock(hCam, IS_PIXELCLOCK_CMD_SET,
(void*)&nPixelClockDefault,
sizeof(nPixelClockDefault));
printf("Status is_PixelClock %d\n",nRet);
//Farbmodus der Kamera setzen
//INT colorMode = IS_CM_CBYCRY_PACKED;
INT colorMode = IS_CM_BGR8_PACKED;
nRet = is_SetColorMode(hCam,colorMode);
printf("Status SetColorMode %d\n",nRet);
UINT formatID = 4;
//Bildgröße einstellen -> 2592x1944
nRet = is_ImageFormat(hCam, IMGFRMT_CMD_SET_FORMAT, &formatID, 4);
printf("Status ImageFormat %d\n",nRet);
//Speicher für Bild alloziieren
char* pMem = NULL;
int memID = 0;
nRet = is_AllocImageMem(hCam, 1280, 1024, 24, &pMem, &memID);
printf("Status AllocImage %d\n",nRet);
//diesen Speicher aktiv setzen
nRet = is_SetImageMem(hCam, pMem, memID);
printf("Status SetImageMem %d\n",nRet);
//Bilder im Kameraspeicher belassen
INT displayMode = IS_SET_DM_DIB;
nRet = is_SetDisplayMode (hCam, displayMode);
printf("Status displayMode %d\n",nRet);
//Bild aufnehmen
nRet = is_FreezeVideo(hCam, IS_WAIT);
printf("Status is_FreezeVideo %d\n",nRet);
//Bild aus dem Speicher auslesen und als Datei speichern
String path = "./calib_en/snap_BGR"+conv.str()+".png";
std::wstring widepath;
for(int i = 0; i < path.length(); ++i)
widepath += wchar_t (path[i] );
IMAGE_FILE_PARAMS ImageFileParams;
ImageFileParams.pwchFileName = &widepath[0];
ImageFileParams.pnImageID = NULL;
ImageFileParams.ppcImageMem = NULL;
ImageFileParams.nQuality = 0;
ImageFileParams.nFileType = IS_IMG_PNG;
nRet = is_ImageFile(hCam, IS_IMAGE_FILE_CMD_SAVE, (void*) &ImageFileParams, sizeof(ImageFileParams));
printf("Status is_ImageFile %d\n",nRet);
//Kamera wieder freigeben
is_ExitCamera(hCam);
cout<<"To quit capturing calibration images, choose q. Else, choose any other letter."<<endl;
cin >> flag;
i++;
}
}
//////////////////////////////////////////////////////////////////////////////////
// GetMaxImageSize ---------------------------------------------------------------
//////////////////////////////////////////////////////////////////////////////////
int ofxUeye::InitDisplayMode()
{
int nRet = IS_NO_SUCCESS;
if (m_hCam == NULL)
return IS_NO_SUCCESS;
// if some image memory exist already then free it
if (m_pcImageMemory != NULL)
nRet = is_FreeImageMem (m_hCam, m_pcImageMemory, m_nMemoryId);
m_pcImageMemory = NULL;
nRet = is_SetDisplayMode( m_hCam, IS_SET_DM_DIB);
if(nRet == IS_SUCCESS)
{
if( m_si.nColorMode == IS_COLORMODE_BAYER )
{
// for color camera models use RGB24 mode
m_nColorMode = IS_SET_CM_RGB24;
m_nBitsPerPixel = 24;
_channels = 3;
_bitsPerPixel = 24;
}
else if( m_si.nColorMode == IS_COLORMODE_CBYCRY )
{
// for CBYCRY camera models use RGB32 mode
m_nColorMode = IS_SET_CM_RGB32;
m_nBitsPerPixel = 32;
_channels = 4;
_bitsPerPixel = 32;
}
else
{
// for monochrome camera models use Y8 mode
m_nColorMode = IS_SET_CM_Y8;
m_nBitsPerPixel = 8;
_channels = 1;
_bitsPerPixel = 8;
}
_bytesPerPixel = _bitsPerPixel / 8;
// allocate an image memory.
nRet = is_AllocImageMem(m_hCam,
m_nSizeX,
m_nSizeY,
m_nBitsPerPixel,
&m_pcImageMemory,
&m_nMemoryId );
_fullPixels = (unsigned char*) malloc(sizeof(unsigned char)*m_nSizeX*m_nSizeY*_channels);
}
if(nRet == IS_SUCCESS)
{
// set the image memory only for the bitmap mode when allocated
if(m_pcImageMemory != NULL)
nRet = is_SetImageMem( m_hCam, m_pcImageMemory, m_nMemoryId );
// set the desired color mode
nRet = is_SetColorMode( m_hCam, m_nColorMode );
// set the image size to capture
// nRet = is_SetImageSize( m_hCam, m_nSizeX, m_nSizeY );
} // end if(nRet == IS_SUCCESS)
return nRet;
}
