/* Set clock frequency */
static int bL_cpufreq_set_target(struct cpufreq_policy *policy,
unsigned int index)
{
u32 cpu = policy->cpu, cur_cluster, new_cluster, actual_cluster;
unsigned int freqs_new;
int ret;
cur_cluster = cpu_to_cluster(cpu);
new_cluster = actual_cluster = per_cpu(physical_cluster, cpu);
freqs_new = freq_table[cur_cluster][index].frequency;
if (is_bL_switching_enabled()) {
if ((actual_cluster == A15_CLUSTER) &&
(freqs_new < clk_big_min)) {
new_cluster = A7_CLUSTER;
} else if ((actual_cluster == A7_CLUSTER) &&
(freqs_new > clk_little_max)) {
new_cluster = A15_CLUSTER;
}
}
ret = bL_cpufreq_set_rate(cpu, actual_cluster, new_cluster, freqs_new);
if (!ret) {
arch_set_freq_scale(policy->related_cpus, freqs_new,
policy->cpuinfo.max_freq);
}
return ret;
}
static unsigned int sunxi_clk_get_cpu_rate(unsigned int cpu)
{
u32 cur_cluster = per_cpu(physical_cluster, cpu), rate;
#ifdef CONFIG_DEBUG_FS
ktime_t calltime = ktime_set(0, 0), delta, rettime;
#endif
mutex_lock(&cluster_lock[cur_cluster]);
#ifdef CONFIG_DEBUG_FS
calltime = ktime_get();
#endif
if (cur_cluster == A7_CLUSTER)
clk_get_rate(clk_pll1);
else if (cur_cluster == A15_CLUSTER)
clk_get_rate(clk_pll2);
rate = clk_get_rate(cluster_clk[cur_cluster]) / 1000;
/* For switcher we use virtual A15 clock rates */
if (is_bL_switching_enabled()) {
rate = VIRT_FREQ(cur_cluster, rate);
}
#ifdef CONFIG_DEBUG_FS
rettime = ktime_get();
delta = ktime_sub(rettime, calltime);
if (cur_cluster == A7_CLUSTER)
c0_get_time_usecs = ktime_to_ns(delta) >> 10;
else if (cur_cluster == A15_CLUSTER)
static unsigned int bL_cpufreq_get_rate(unsigned int cpu)
{
if (is_bL_switching_enabled()) {
pr_debug("%s: freq: %d\n", __func__, per_cpu(cpu_last_req_freq,
cpu));
return per_cpu(cpu_last_req_freq, cpu);
} else {
return clk_get_cpu_rate(cpu);
}
}
static unsigned int clk_get_cpu_rate(unsigned int cpu)
{
u32 cur_cluster = per_cpu(physical_cluster, cpu);
u32 rate = clk_get_rate(clk[cur_cluster]) / 1000;
/* For switcher we use virtual A7 clock rates */
if (is_bL_switching_enabled())
rate = VIRT_FREQ(cur_cluster, rate);
pr_debug("%s: cpu: %d, cluster: %d, freq: %u\n", __func__, cpu,
cur_cluster, rate);
return rate;
}
/* Per-CPU initialization */
static int bL_cpufreq_init(struct cpufreq_policy *policy)
{
u32 cur_cluster = cpu_to_cluster(policy->cpu);
struct device *cpu_dev;
int ret;
cpu_dev = get_cpu_device(policy->cpu);
if (!cpu_dev) {
pr_err("%s: failed to get cpu%d device\n", __func__,
policy->cpu);
return -ENODEV;
}
ret = get_cluster_clk_and_freq_table(cpu_dev);
if (ret)
return ret;
ret = cpufreq_table_validate_and_show(policy, freq_table[cur_cluster]);
if (ret) {
dev_err(cpu_dev, "CPU %d, cluster: %d invalid freq table\n",
policy->cpu, cur_cluster);
put_cluster_clk_and_freq_table(cpu_dev);
return ret;
}
if (cur_cluster < MAX_CLUSTERS) {
int cpu;
cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu));
for_each_cpu(cpu, policy->cpus)
per_cpu(physical_cluster, cpu) = cur_cluster;
} else {
/* Assumption: during init, we are always running on A15 */
per_cpu(physical_cluster, policy->cpu) = A15_CLUSTER;
}
if (arm_bL_ops->get_transition_latency)
policy->cpuinfo.transition_latency =
arm_bL_ops->get_transition_latency(cpu_dev);
else
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
if (is_bL_switching_enabled())
per_cpu(cpu_last_req_freq, policy->cpu) = clk_get_cpu_rate(policy->cpu);
dev_info(cpu_dev, "%s: CPU %d initialized\n", __func__, policy->cpu);
return 0;
}
static inline int cpu_to_cluster(int cpu)
{
return is_bL_switching_enabled() ?
MAX_CLUSTERS : raw_cpu_to_cluster(cpu);
}
static unsigned int
bL_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate)
{
u32 new_rate, prev_rate;
int ret;
bool bLs = is_bL_switching_enabled();
mutex_lock(&cluster_lock[new_cluster]);
if (bLs) {
prev_rate = per_cpu(cpu_last_req_freq, cpu);
per_cpu(cpu_last_req_freq, cpu) = rate;
per_cpu(physical_cluster, cpu) = new_cluster;
new_rate = find_cluster_maxfreq(new_cluster);
new_rate = ACTUAL_FREQ(new_cluster, new_rate);
} else {
new_rate = rate;
}
pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d, freq: %d\n",
__func__, cpu, old_cluster, new_cluster, new_rate);
ret = clk_set_rate(clk[new_cluster], new_rate * 1000);
if (!ret) {
/*
* FIXME: clk_set_rate hasn't returned an error here however it
* may be that clk_change_rate failed due to hardware or
* firmware issues and wasn't able to report that due to the
* current design of the clk core layer. To work around this
* problem we will read back the clock rate and check it is
* correct. This needs to be removed once clk core is fixed.
*/
if (clk_get_rate(clk[new_cluster]) != new_rate * 1000)
ret = -EIO;
}
if (WARN_ON(ret)) {
pr_err("clk_set_rate failed: %d, new cluster: %d\n", ret,
new_cluster);
if (bLs) {
per_cpu(cpu_last_req_freq, cpu) = prev_rate;
per_cpu(physical_cluster, cpu) = old_cluster;
}
mutex_unlock(&cluster_lock[new_cluster]);
return ret;
}
mutex_unlock(&cluster_lock[new_cluster]);
/* Recalc freq for old cluster when switching clusters */
if (old_cluster != new_cluster) {
pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d\n",
__func__, cpu, old_cluster, new_cluster);
/* Switch cluster */
bL_switch_request(cpu, new_cluster);
mutex_lock(&cluster_lock[old_cluster]);
/* Set freq of old cluster if there are cpus left on it */
new_rate = find_cluster_maxfreq(old_cluster);
new_rate = ACTUAL_FREQ(old_cluster, new_rate);
if (new_rate) {
pr_debug("%s: Updating rate of old cluster: %d, to freq: %d\n",
__func__, old_cluster, new_rate);
if (clk_set_rate(clk[old_cluster], new_rate * 1000))
pr_err("%s: clk_set_rate failed: %d, old cluster: %d\n",
__func__, ret, old_cluster);
}
mutex_unlock(&cluster_lock[old_cluster]);
}
return 0;
}
static unsigned int
bL_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate)
{
u32 new_rate, prev_rate;
int ret;
bool bLs = is_bL_switching_enabled();
mutex_lock(&cluster_lock[new_cluster]);
if (bLs) {
prev_rate = per_cpu(cpu_last_req_freq, cpu);
per_cpu(cpu_last_req_freq, cpu) = rate;
per_cpu(physical_cluster, cpu) = new_cluster;
new_rate = find_cluster_maxfreq(new_cluster);
new_rate = ACTUAL_FREQ(new_cluster, new_rate);
} else {
new_rate = rate;
}
pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d, freq: %d\n",
__func__, cpu, old_cluster, new_cluster, new_rate);
ret = clk_set_rate(clk[new_cluster], new_rate * 1000);
if (WARN_ON(ret)) {
pr_err("clk_set_rate failed: %d, new cluster: %d\n", ret,
new_cluster);
if (bLs) {
per_cpu(cpu_last_req_freq, cpu) = prev_rate;
per_cpu(physical_cluster, cpu) = old_cluster;
}
mutex_unlock(&cluster_lock[new_cluster]);
return ret;
}
mutex_unlock(&cluster_lock[new_cluster]);
/* Recalc freq for old cluster when switching clusters */
if (old_cluster != new_cluster) {
pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d\n",
__func__, cpu, old_cluster, new_cluster);
/* Switch cluster */
bL_switch_request(cpu, new_cluster);
mutex_lock(&cluster_lock[old_cluster]);
/* Set freq of old cluster if there are cpus left on it */
new_rate = find_cluster_maxfreq(old_cluster);
new_rate = ACTUAL_FREQ(old_cluster, new_rate);
if (new_rate) {
pr_debug("%s: Updating rate of old cluster: %d, to freq: %d\n",
__func__, old_cluster, new_rate);
if (clk_set_rate(clk[old_cluster], new_rate * 1000))
pr_err("%s: clk_set_rate failed: %d, old cluster: %d\n",
__func__, ret, old_cluster);
}
mutex_unlock(&cluster_lock[old_cluster]);
}
return 0;
}
static unsigned int
bL_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate)
{
u32 new_rate, prev_rate;
int ret;
bool bLs = is_bL_switching_enabled();
mutex_lock(&cluster_lock[new_cluster]);
if (bLs) {
prev_rate = per_cpu(cpu_last_req_freq, cpu);
per_cpu(cpu_last_req_freq, cpu) = rate;
per_cpu(physical_cluster, cpu) = new_cluster;
new_rate = find_cluster_maxfreq(new_cluster);
new_rate = ACTUAL_FREQ(new_cluster, new_rate);
} else {
new_rate = rate;
}
pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d, freq: %d\n",
__func__, cpu, old_cluster, new_cluster, new_rate);
ret = clk_set_rate(clk[new_cluster], new_rate * 1000);
if (WARN_ON(ret)) {
pr_err("clk_set_rate failed: %d, new cluster: %d\n", ret,
new_cluster);
if (bLs) {
per_cpu(cpu_last_req_freq, cpu) = prev_rate;
per_cpu(physical_cluster, cpu) = old_cluster;
}
mutex_unlock(&cluster_lock[new_cluster]);
return ret;
}
mutex_unlock(&cluster_lock[new_cluster]);
/* Recalc freq for old cluster when switching clusters */
if (old_cluster != new_cluster) {
pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d\n",
__func__, cpu, old_cluster, new_cluster);
/* Switch cluster */
bL_switch_request(cpu, new_cluster);
mutex_lock(&cluster_lock[old_cluster]);
/* Set freq of old cluster if there are cpus left on it */
new_rate = find_cluster_maxfreq(old_cluster);
new_rate = ACTUAL_FREQ(old_cluster, new_rate);
if (new_rate) {
pr_debug("%s: Updating rate of old cluster: %d, to freq: %d\n",
__func__, old_cluster, new_rate);
if (clk_set_rate(clk[old_cluster], new_rate * 1000))
pr_err("%s: clk_set_rate failed: %d, old cluster: %d\n",
__func__, ret, old_cluster);
}
mutex_unlock(&cluster_lock[old_cluster]);
}
/*
* FIXME: clk_set_rate has to handle the case where clk_change_rate
* can fail due to hardware or firmware issues. Until the clk core
* layer is fixed, we can check here. In most of the cases we will
* be reading only the cached value anyway. This needs to be removed
* once clk core is fixed.
*/
if (bL_cpufreq_get_rate(cpu) != new_rate)
return -EIO;
return 0;
}
