static struct vector_info get_vec_from_lval(ivl_statement_t net,
struct vec_slice_info*slices)
{
struct vector_info res;
unsigned lidx;
unsigned cur_bit;
res.wid = ivl_stmt_lwidth(net);
res.base = allocate_vector(res.wid);
cur_bit = 0;
for (lidx = 0 ; lidx < ivl_stmt_lvals(net) ; lidx += 1) {
unsigned bidx;
ivl_lval_t lval;
unsigned bit_limit = res.wid - cur_bit;
lval = ivl_stmt_lval(net, lidx);
if (bit_limit > ivl_lval_width(lval))
bit_limit = ivl_lval_width(lval);
bidx = res.base + cur_bit;
get_vec_from_lval_slice(lval, slices+lidx, bidx, bit_limit);
cur_bit += bit_limit;
}
return res;
}
/*
* This is a private function to generate %set code for the
* statement. At this point, the r-value is evaluated and stored in
* the res vector, I just need to generate the %set statements for the
* l-values of the assignment.
*/
static void set_vec_to_lval(ivl_statement_t net, struct vector_info res)
{
unsigned wid = res.wid;
unsigned lidx;
unsigned cur_rbit = 0;
for (lidx = 0 ; lidx < ivl_stmt_lvals(net) ; lidx += 1) {
unsigned bidx;
unsigned bit_limit = wid - cur_rbit;
ivl_lval_t lval = ivl_stmt_lval(net, lidx);
/* Reduce bit_limit to the width of this l-value. */
if (bit_limit > ivl_lval_width(lval))
bit_limit = ivl_lval_width(lval);
/* This is the address within the larger r-value of the
bit that this l-value takes. */
bidx = res.base < 4? res.base : (res.base+cur_rbit);
set_vec_to_lval_slice(lval, bidx, bit_limit);
/* Now we've consumed this many r-value bits for the
current l-value. */
cur_rbit += bit_limit;
}
}
/*
* This loads the l-value values into the top of the stack, and also
* leaves in the slices the information needed to store the slice
* results back.
*/
static void get_vec_from_lval(ivl_statement_t net, struct vec_slice_info*slices)
{
unsigned lidx;
unsigned cur_bit;
unsigned wid = ivl_stmt_lwidth(net);
cur_bit = 0;
for (lidx = 0 ; lidx < ivl_stmt_lvals(net) ; lidx += 1) {
ivl_lval_t lval;
unsigned bit_limit = wid - cur_bit;
lval = ivl_stmt_lval(net, lidx);
if (bit_limit > ivl_lval_width(lval))
bit_limit = ivl_lval_width(lval);
get_vec_from_lval_slice(lval, slices+lidx, bit_limit);
if (lidx > 0) {
fprintf(vvp_out, " %%concat/vec4;\n");
}
cur_bit += bit_limit;
}
}
static void put_vec_to_lval(ivl_statement_t net, struct vec_slice_info*slices)
{
unsigned lidx;
unsigned cur_bit;
unsigned wid = ivl_stmt_lwidth(net);
cur_bit = 0;
for (lidx = 0 ; lidx < ivl_stmt_lvals(net) ; lidx += 1) {
ivl_lval_t lval;
unsigned bit_limit = wid - cur_bit;
lval = ivl_stmt_lval(net, lidx);
if (bit_limit > ivl_lval_width(lval))
bit_limit = ivl_lval_width(lval);
if (lidx+1 < ivl_stmt_lvals(net))
fprintf(vvp_out, " %%split/vec4 %u;\n", bit_limit);
put_vec_to_lval_slice(lval, slices+lidx, bit_limit);
cur_bit += bit_limit;
}
}
static unsigned emit_stmt_lval(ivl_scope_t scope, ivl_statement_t stmt)
{
unsigned count = ivl_stmt_lvals(stmt);
unsigned wid = 0;
if (count > 1) {
unsigned idx;
ivl_lval_t lval;
fprintf(vlog_out, "{");
for (idx = count - 1; idx > 0; idx -= 1) {
lval = ivl_stmt_lval(stmt, idx);
wid += ivl_lval_width(lval);
emit_stmt_lval_piece(scope, lval);
fprintf(vlog_out, ", ");
}
lval = ivl_stmt_lval(stmt, 0);
wid += ivl_lval_width(lval);
emit_stmt_lval_piece(scope, lval);
fprintf(vlog_out, "}");
} else {
ivl_lval_t lval = ivl_stmt_lval(stmt, 0);
wid = ivl_lval_width(lval);
emit_stmt_lval_piece(scope, lval);
}
return wid;
}
static int show_stmt_assign_sig_darray(ivl_statement_t net)
{
int errors = 0;
ivl_lval_t lval = ivl_stmt_lval(net, 0);
ivl_expr_t rval = ivl_stmt_rval(net);
ivl_expr_t part = ivl_lval_part_off(lval);
ivl_signal_t var= ivl_lval_sig(lval);
ivl_type_t var_type= ivl_signal_net_type(var);
assert(ivl_type_base(var_type) == IVL_VT_DARRAY);
ivl_type_t element_type = ivl_type_element(var_type);
ivl_expr_t mux = ivl_lval_idx(lval);
assert(ivl_stmt_lvals(net) == 1);
assert(ivl_stmt_opcode(net) == 0);
assert(ivl_lval_mux(lval) == 0);
assert(part == 0);
if (mux && (ivl_type_base(element_type)==IVL_VT_REAL)) {
draw_eval_real(rval);
/* The %set/dar expects the array index to be in index
register 3. Calculate the index in place. */
draw_eval_expr_into_integer(mux, 3);
fprintf(vvp_out, " %%store/dar/r v%p_0;\n", var);
} else if (mux && ivl_type_base(element_type)==IVL_VT_STRING) {
/* Evaluate the rval into the top of the string stack. */
draw_eval_string(rval);
/* The %store/dar/s expects the array index to me in index
register 3. Calculate the index in place. */
draw_eval_expr_into_integer(mux, 3);
fprintf(vvp_out, " %%store/dar/str v%p_0;\n", var);
} else if (mux) {
struct vector_info rvec = draw_eval_expr_wid(rval, ivl_lval_width(lval),
STUFF_OK_XZ);
/* The %set/dar expects the array index to be in index
register 3. Calculate the index in place. */
draw_eval_expr_into_integer(mux, 3);
fprintf(vvp_out, " %%set/dar v%p_0, %u, %u;\n",
var, rvec.base, rvec.wid);
if (rvec.base >= 4) clr_vector(rvec);
} else {
/* There is no l-value mux, so this must be an
assignment to the array as a whole. Evaluate the
"object", and store the evaluated result. */
errors += draw_eval_object(rval);
fprintf(vvp_out, " %%store/obj v%p_0;\n", var);
}
return errors;
}
/*
* Check to see if the statement L-value is a port in the given scope.
* If it is return the zero based port number.
*/
static unsigned utask_in_port_idx(ivl_scope_t scope, ivl_statement_t stmt)
{
unsigned idx, ports = ivl_scope_ports(scope);
ivl_lval_t lval = ivl_stmt_lval(stmt, 0);
ivl_signal_t lsig = ivl_lval_sig(lval);
const char *sig_name;
/* The L-value must be a single signal. */
if (ivl_stmt_lvals(stmt) != 1) return ports;
/* It must not have an array select. */
if (ivl_lval_idx(lval)) return ports;
/* It must not have a non-zero base. */
if (ivl_lval_part_off(lval)) return ports;
/* It must not be part of the signal. */
if (ivl_lval_width(lval) != ivl_signal_width(lsig)) return ports;
/* It must have the same scope as the task. */
if (scope != ivl_signal_scope(lsig)) return ports;
/* It must be an input or inout port of the task. */
sig_name = ivl_signal_basename(lsig);
for (idx = 0; idx < ports; idx += 1) {
ivl_signal_t port = ivl_scope_port(scope, idx);
ivl_signal_port_t port_type = ivl_signal_port(port);
if ((port_type != IVL_SIP_INPUT) &&
(port_type != IVL_SIP_INOUT)) continue;
if (strcmp(sig_name, ivl_signal_basename(port)) == 0) break;
}
return idx;
}
static void put_vec_to_lval(ivl_statement_t net, struct vec_slice_info*slices,
struct vector_info res)
{
unsigned lidx;
unsigned cur_bit;
cur_bit = 0;
for (lidx = 0 ; lidx < ivl_stmt_lvals(net) ; lidx += 1) {
unsigned bidx;
ivl_lval_t lval;
unsigned bit_limit = res.wid - cur_bit;
lval = ivl_stmt_lval(net, lidx);
if (bit_limit > ivl_lval_width(lval))
bit_limit = ivl_lval_width(lval);
bidx = res.base + cur_bit;
put_vec_to_lval_slice(lval, slices+lidx, bidx, bit_limit);
cur_bit += bit_limit;
}
}
static void emit_stmt_lval_piece(ivl_scope_t scope, ivl_lval_t lval)
{
ivl_signal_t sig = ivl_lval_sig(lval);
ivl_expr_t sel_expr;
ivl_select_type_t sel_type;
unsigned width = ivl_lval_width(lval);
int msb, lsb;
assert(width > 0);
/* If there are no selects then just print the name. */
sel_expr = ivl_lval_part_off(lval);
if (! sel_expr && (width == ivl_signal_width(sig))) {
emit_stmt_lval_name(scope, lval, sig);
return;
}
/* We have some kind of select. */
lsb = ivl_signal_lsb(sig);
msb = ivl_signal_msb(sig);
sel_type = ivl_lval_sel_type(lval);
assert(sel_expr);
/* A bit select. */
if (width == 1) {
emit_stmt_lval_name(scope, lval, sig);
fprintf(vlog_out, "[");
emit_scaled_expr(scope, sel_expr, msb, lsb);
fprintf(vlog_out, "]");
} else {
/* A constant part select. */
if (ivl_expr_type(sel_expr) == IVL_EX_NUMBER) {
emit_stmt_lval_name(scope, lval, sig);
emit_scaled_range(scope, sel_expr, width, msb, lsb);
/* An indexed part select. */
} else {
assert(sel_type != IVL_SEL_OTHER);
emit_stmt_lval_ips(scope, lval, sig, sel_expr, sel_type,
width, msb, lsb);
}
}
}
static void set_vec_to_lval_slice(ivl_lval_t lval, unsigned bit, unsigned wid)
{
ivl_signal_t sig = ivl_lval_sig(lval);
ivl_expr_t part_off_ex = ivl_lval_part_off(lval);
unsigned long part_off = 0;
/* Although Verilog doesn't support it, we'll handle
here the case of an l-value part select of an array
word if the address is constant. */
ivl_expr_t word_ix = ivl_lval_idx(lval);
unsigned long use_word = 0;
if (part_off_ex == 0) {
part_off = 0;
} else if (number_is_immediate(part_off_ex, IMM_WID, 0) &&
!number_is_unknown(part_off_ex)) {
part_off = get_number_immediate(part_off_ex);
part_off_ex = 0;
}
/* If the word index is a constant expression, then evaluate
it to select the word, and pay no further heed to the
expression itself. Out-of-bounds and undefined indices are
converted to a canonical index of 'bx during elaboration,
and we don't try to optimise that case. */
if (word_ix && number_is_immediate(word_ix, IMM_WID, 0) &&
!number_is_unknown(word_ix)) {
use_word = get_number_immediate(word_ix);
assert(use_word < ivl_signal_array_count(sig));
word_ix = 0;
}
if (ivl_lval_mux(lval))
part_off_ex = ivl_lval_mux(lval);
if (part_off_ex && ivl_signal_dimensions(sig) == 0) {
unsigned skip_set = transient_id++;
/* There is a mux expression, so this must be a write to
a bit-select l-val. Presumably, the x0 index register
has been loaded wit the result of the evaluated
part select base expression. */
assert(!word_ix);
draw_eval_expr_into_integer(part_off_ex, 0);
fprintf(vvp_out, " %%jmp/1 t_%u, 4;\n", skip_set);
fprintf(vvp_out, " %%set/x0 v%p_%lu, %u, %u;\n",
sig, use_word, bit, wid);
fprintf(vvp_out, "t_%u ;\n", skip_set);
/* save_signal width of 0 CLEARS the signal from the
lookaside. */
save_signal_lookaside(bit, sig, use_word, 0);
} else if (part_off_ex && ivl_signal_dimensions(sig) > 0) {
/* Here we have a part select write into an array word. */
unsigned skip_set = transient_id++;
if (word_ix) {
draw_eval_expr_into_integer(word_ix, 3);
fprintf(vvp_out, " %%jmp/1 t_%u, 4;\n", skip_set);
} else {
fprintf(vvp_out, " %%ix/load 3, %lu, 0;\n", use_word);
}
draw_eval_expr_into_integer(part_off_ex, 1);
fprintf(vvp_out, " %%jmp/1 t_%u, 4;\n", skip_set);
fprintf(vvp_out, " %%set/av v%p, %u, %u;\n",
sig, bit, wid);
fprintf(vvp_out, "t_%u ;\n", skip_set);
} else if ((part_off>0 || ivl_lval_width(lval)!=ivl_signal_width(sig))
&& ivl_signal_dimensions(sig) > 0) {
/* Here we have a part select write into an array word. */
unsigned skip_set = transient_id++;
if (word_ix) {
draw_eval_expr_into_integer(word_ix, 3);
fprintf(vvp_out, " %%jmp/1 t_%u, 4;\n", skip_set);
} else {
fprintf(vvp_out, " %%ix/load 3, %lu, 0;\n", use_word);
}
fprintf(vvp_out, " %%ix/load 1, %lu, 0;\n", part_off);
fprintf(vvp_out, " %%set/av v%p, %u, %u;\n",
sig, bit, wid);
if (word_ix) /* Only need this label if word_ix is set. */
fprintf(vvp_out, "t_%u ;\n", skip_set);
} else if (part_off>0 || ivl_lval_width(lval)!=ivl_signal_width(sig)) {
/* There is no mux expression, but a constant part
offset. Load that into index x0 and generate a
vector set instruction. */
assert(ivl_lval_width(lval) == wid);
/* If the word index is a constant, then we can write
directly to the word and save the index calculation. */
if (word_ix == 0) {
fprintf(vvp_out, " %%ix/load 0, %lu, 0;\n", part_off);
fprintf(vvp_out, " %%set/x0 v%p_%lu, %u, %u;\n",
sig, use_word, bit, wid);
} else {
unsigned skip_set = transient_id++;
unsigned index_reg = 3;
draw_eval_expr_into_integer(word_ix, index_reg);
fprintf(vvp_out, " %%jmp/1 t_%u, 4;\n", skip_set);
fprintf(vvp_out, " %%ix/load 1, %lu, 0;\n", part_off);
fprintf(vvp_out, " %%set/av v%p, %u, %u;\n",
sig, bit, wid);
fprintf(vvp_out, "t_%u ;\n", skip_set);
}
/* save_signal width of 0 CLEARS the signal from the
lookaside. */
save_signal_lookaside(bit, sig, use_word, 0);
} else if (ivl_signal_dimensions(sig) > 0) {
/* If the word index is a constant, then we can write
directly to the word and save the index calculation. */
if (word_ix == 0) {
fprintf(vvp_out, " %%ix/load 1, 0, 0;\n");
fprintf(vvp_out, " %%ix/load 3, %lu, 0;\n", use_word);
fprintf(vvp_out, " %%set/av v%p, %u, %u;\n",
sig, bit, wid);
} else {
unsigned skip_set = transient_id++;
unsigned index_reg = 3;
draw_eval_expr_into_integer(word_ix, index_reg);
fprintf(vvp_out, " %%jmp/1 t_%u, 4;\n", skip_set);
fprintf(vvp_out, " %%ix/load 1, 0, 0;\n");
fprintf(vvp_out, " %%set/av v%p, %u, %u;\n",
sig, bit, wid);
fprintf(vvp_out, "t_%u ;\n", skip_set);
}
/* save_signal width of 0 CLEARS the signal from the
lookaside. */
save_signal_lookaside(bit, sig, use_word, 0);
} else {
fprintf(vvp_out, " %%set/v v%p_%lu, %u, %u;\n",
sig, use_word, bit, wid);
/* save_signal width of 0 CLEARS the signal from the
lookaside. */
save_signal_lookaside(bit, sig, use_word, 0);
}
}
static int show_stmt_assign_sig_cobject(ivl_statement_t net)
{
int errors = 0;
ivl_lval_t lval = ivl_stmt_lval(net, 0);
ivl_expr_t rval = ivl_stmt_rval(net);
ivl_signal_t sig= ivl_lval_sig(lval);
unsigned lwid = ivl_lval_width(lval);
int prop_idx = ivl_lval_property_idx(lval);
if (prop_idx >= 0) {
ivl_type_t sig_type = ivl_signal_net_type(sig);
ivl_type_t prop_type = ivl_type_prop_type(sig_type, prop_idx);
if (ivl_type_base(prop_type) == IVL_VT_BOOL) {
assert(ivl_type_packed_dimensions(prop_type) == 1);
assert(ivl_type_packed_msb(prop_type,0) >= ivl_type_packed_lsb(prop_type, 0));
draw_eval_vec4(rval);
if (ivl_expr_value(rval)!=IVL_VT_BOOL)
fprintf(vvp_out, " %%cast2;\n");
fprintf(vvp_out, " %%load/obj v%p_0;\n", sig);
fprintf(vvp_out, " %%store/prop/v %d, %u; Store in bool property %s\n",
prop_idx, lwid, ivl_type_prop_name(sig_type, prop_idx));
fprintf(vvp_out, " %%pop/obj 1, 0;\n");
} else if (ivl_type_base(prop_type) == IVL_VT_LOGIC) {
assert(ivl_type_packed_dimensions(prop_type) == 1);
assert(ivl_type_packed_msb(prop_type,0) >= ivl_type_packed_lsb(prop_type, 0));
draw_eval_vec4(rval);
fprintf(vvp_out, " %%load/obj v%p_0;\n", sig);
fprintf(vvp_out, " %%store/prop/v %d, %u; Store in logic property %s\n",
prop_idx, lwid, ivl_type_prop_name(sig_type, prop_idx));
fprintf(vvp_out, " %%pop/obj 1, 0;\n");
} else if (ivl_type_base(prop_type) == IVL_VT_REAL) {
/* Calculate the real value into the real value
stack. The %store/prop/r will pop the stack
value. */
draw_eval_real(rval);
fprintf(vvp_out, " %%load/obj v%p_0;\n", sig);
fprintf(vvp_out, " %%store/prop/r %d;\n", prop_idx);
fprintf(vvp_out, " %%pop/obj 1, 0;\n");
} else if (ivl_type_base(prop_type) == IVL_VT_STRING) {
/* Calculate the string value into the string value
stack. The %store/prop/r will pop the stack
value. */
draw_eval_string(rval);
fprintf(vvp_out, " %%load/obj v%p_0;\n", sig);
fprintf(vvp_out, " %%store/prop/str %d;\n", prop_idx);
fprintf(vvp_out, " %%pop/obj 1, 0;\n");
} else if (ivl_type_base(prop_type) == IVL_VT_DARRAY) {
int idx = 0;
/* The property is a darray, and there is no mux
expression to the assignment is of an entire
array object. */
fprintf(vvp_out, " %%load/obj v%p_0;\n", sig);
draw_eval_object(rval);
fprintf(vvp_out, " %%store/prop/obj %d, %d; IVL_VT_DARRAY\n", prop_idx, idx);
fprintf(vvp_out, " %%pop/obj 1, 0;\n");
} else if (ivl_type_base(prop_type) == IVL_VT_CLASS) {
int idx = 0;
ivl_expr_t idx_expr;
if ( (idx_expr = ivl_lval_idx(lval)) ) {
idx = allocate_word();
}
/* The property is a class object. */
fprintf(vvp_out, " %%load/obj v%p_0;\n", sig);
draw_eval_object(rval);
if (idx_expr) draw_eval_expr_into_integer(idx_expr, idx);
fprintf(vvp_out, " %%store/prop/obj %d, %d; IVL_VT_CLASS\n", prop_idx, idx);
fprintf(vvp_out, " %%pop/obj 1, 0;\n");
if (idx_expr) clr_word(idx);
} else {
fprintf(vvp_out, " ; ERROR: ivl_type_base(prop_type) = %d\n",
ivl_type_base(prop_type));
assert(0);
}
} else {
/* There is no property select, so evaluate the r-value
as an object and assign the entire object to the
variable. */
errors += draw_eval_object(rval);
if (ivl_signal_array_count(sig) > 1) {
unsigned ix;
ivl_expr_t aidx = ivl_lval_idx(lval);
draw_eval_expr_into_integer(aidx, (ix = allocate_word()));
fprintf(vvp_out, " %%store/obja v%p, %u;\n", sig, ix);
clr_word(ix);
} else {
/* Not an array, so no index expression */
fprintf(vvp_out, " %%store/obj v%p_0;\n", sig);
}
}
return errors;
}
/*
* Store a vector from the vec4 stack to the statement l-values. This
* all assumes that the value to be assigned is already on the top of
* the stack.
*
* NOTE TO SELF: The %store/vec4 takes a width, but the %assign/vec4
* instructions do not, instead relying on the expression width. I
* think that it the proper way to do it, so soon I should change the
* %store/vec4 to not include the width operand.
*/
static void store_vec4_to_lval(ivl_statement_t net)
{
for (unsigned lidx = 0 ; lidx < ivl_stmt_lvals(net) ; lidx += 1) {
ivl_lval_t lval = ivl_stmt_lval(net,lidx);
ivl_signal_t lsig = ivl_lval_sig(lval);
ivl_lval_t nest = ivl_lval_nest(lval);
unsigned lwid = ivl_lval_width(lval);
ivl_expr_t part_off_ex = ivl_lval_part_off(lval);
/* This is non-nil if the l-val is the word of a memory,
and nil otherwise. */
ivl_expr_t word_ex = ivl_lval_idx(lval);
if (lidx+1 < ivl_stmt_lvals(net))
fprintf(vvp_out, " %%split/vec4 %u;\n", lwid);
if (word_ex) {
/* Handle index into an array */
int word_index = allocate_word();
int part_index = 0;
/* Calculate the word address into word_index */
draw_eval_expr_into_integer(word_ex, word_index);
/* If there is a part_offset, calculate it into part_index. */
if (part_off_ex) {
int flag_index = allocate_flag();
part_index = allocate_word();
fprintf(vvp_out, " %%flag_mov %d, 4;\n", flag_index);
draw_eval_expr_into_integer(part_off_ex, part_index);
fprintf(vvp_out, " %%flag_or 4, %d;\n", flag_index);
clr_flag(flag_index);
}
assert(lsig);
fprintf(vvp_out, " %%store/vec4a v%p, %d, %d;\n",
lsig, word_index, part_index);
clr_word(word_index);
if (part_index)
clr_word(part_index);
} else if (part_off_ex) {
/* Dynamically calculated part offset */
int offset_index = allocate_word();
draw_eval_expr_into_integer(part_off_ex, offset_index);
/* Note that flag4 is set by the eval above. */
assert(lsig);
if (ivl_signal_type(lsig)==IVL_SIT_UWIRE) {
fprintf(vvp_out, " %%force/vec4/off v%p_0, %u;\n",
lsig, offset_index);
} else {
fprintf(vvp_out, " %%store/vec4 v%p_0, %d, %u;\n",
lsig, offset_index, lwid);
}
clr_word(offset_index);
} else if (nest) {
/* No offset expression, but the l-value is
nested, which probably means that it is a class
member. We will use a property assign
function. */
assert(!lsig);
ivl_type_t sub_type = draw_lval_expr(nest);
assert(ivl_type_base(sub_type) == IVL_VT_CLASS);
fprintf(vvp_out, " %%store/prop/v %u, %u;\n",
ivl_lval_property_idx(lval), lwid);
fprintf(vvp_out, " %%pop/obj 1, 0;\n");
} else {
/* No offset expression, so use simpler store function. */
assert(lsig);
assert(lwid == ivl_signal_width(lsig));
fprintf(vvp_out, " %%store/vec4 v%p_0, 0, %u;\n", lsig, lwid);
}
}
}
/*
* Icarus translated <var> = repeat(<count>) <event> <value> into
* begin
* <tmp> = <value>;
* repeat(<count>) <event>;
* <var> = <tmp>;
* end
* This routine looks for this pattern and turns it back into the
* appropriate blocking assignment.
*/
static unsigned is_repeat_event_assign(ivl_scope_t scope, ivl_statement_t stmt)
{
unsigned wid;
ivl_statement_t assign, event, event_assign, repeat;
ivl_lval_t lval;
ivl_expr_t rval;
ivl_signal_t lsig, rsig;
/* We must have three block elements. */
if (ivl_stmt_block_count(stmt) != 3) return 0;
/* The first must be an assign. */
assign = ivl_stmt_block_stmt(stmt, 0);
if (ivl_statement_type(assign) != IVL_ST_ASSIGN) return 0;
/* The second must be a repeat with an event or an event. */
repeat = ivl_stmt_block_stmt(stmt, 1);
if (ivl_statement_type(repeat) != IVL_ST_REPEAT) return 0;
/* The repeat must have an event statement. */
event = ivl_stmt_sub_stmt(repeat);
if (ivl_statement_type(event) != IVL_ST_WAIT) return 0;
/* The third must be an assign. */
event_assign = ivl_stmt_block_stmt(stmt, 2);
if (ivl_statement_type(event_assign) != IVL_ST_ASSIGN) return 0;
/* The L-value must be a single signal. */
if (ivl_stmt_lvals(assign) != 1) return 0;
lval = ivl_stmt_lval(assign, 0);
/* It must not have an array select. */
if (ivl_lval_idx(lval)) return 0;
/* It must not have a non-zero base. */
if (ivl_lval_part_off(lval)) return 0;
lsig = ivl_lval_sig(lval);
/* It must not be part of the signal. */
if (ivl_lval_width(lval) != ivl_signal_width(lsig)) return 0;
/* The R-value must be a single signal. */
rval = ivl_stmt_rval(event_assign);
if (ivl_expr_type(rval) != IVL_EX_SIGNAL) return 0;
/* It must not be an array word. */
if (ivl_expr_oper1(rval)) return 0;
rsig = ivl_expr_signal(rval);
/* The two signals must be the same. */
if (lsig != rsig) return 0;
/* And finally the four statements must have the same line number
* as the block. */
if ((ivl_stmt_lineno(stmt) != ivl_stmt_lineno(assign)) ||
(ivl_stmt_lineno(stmt) != ivl_stmt_lineno(repeat)) ||
(ivl_stmt_lineno(stmt) != ivl_stmt_lineno(event)) ||
(ivl_stmt_lineno(stmt) != ivl_stmt_lineno(event_assign))) {
return 0;
}
/* The pattern matched so generate the appropriate code. */
fprintf(vlog_out, "%*c", get_indent(), ' ');
wid = emit_stmt_lval(scope, event_assign);
fprintf(vlog_out, " =");
if (repeat) {
fprintf(vlog_out, " repeat (");
emit_expr(scope, ivl_stmt_cond_expr(repeat), 0);
fprintf(vlog_out, ")");
}
fprintf(vlog_out, " @(");
emit_event(scope, event);
fprintf(vlog_out, ") ");
emit_expr(scope, ivl_stmt_rval(assign), wid);
fprintf(vlog_out, ";");
emit_stmt_file_line(stmt);
fprintf(vlog_out, "\n");
return 1;
}
/*
* Icarus translated <var> = <delay or event> <value> into
* begin
* <tmp> = <value>;
* <delay or event> <var> = <tmp>;
* end
* This routine looks for this pattern and turns it back into the
* appropriate blocking assignment.
*/
static unsigned is_delayed_or_event_assign(ivl_scope_t scope,
ivl_statement_t stmt)
{
unsigned wid;
ivl_statement_t assign, delay, delayed_assign;
ivl_statement_type_t delay_type;
ivl_lval_t lval;
ivl_expr_t rval;
ivl_signal_t lsig, rsig;
/* We must have two block elements. */
if (ivl_stmt_block_count(stmt) != 2) return 0;
/* The first must be an assign. */
assign = ivl_stmt_block_stmt(stmt, 0);
if (ivl_statement_type(assign) != IVL_ST_ASSIGN) return 0;
/* The second must be a delayx. */
delay = ivl_stmt_block_stmt(stmt, 1);
delay_type = ivl_statement_type(delay);
if ((delay_type != IVL_ST_DELAYX) &&
(delay_type != IVL_ST_WAIT)) return 0;
/* The statement for the delayx must be an assign. */
delayed_assign = ivl_stmt_sub_stmt(delay);
if (ivl_statement_type(delayed_assign) != IVL_ST_ASSIGN) return 0;
/* The L-value must be a single signal. */
if (ivl_stmt_lvals(assign) != 1) return 0;
lval = ivl_stmt_lval(assign, 0);
/* It must not have an array select. */
if (ivl_lval_idx(lval)) return 0;
/* It must not have a non-zero base. */
if (ivl_lval_part_off(lval)) return 0;
lsig = ivl_lval_sig(lval);
/* It must not be part of the signal. */
if (ivl_lval_width(lval) != ivl_signal_width(lsig)) return 0;
/* The R-value must be a single signal. */
rval = ivl_stmt_rval(delayed_assign);
if (ivl_expr_type(rval) != IVL_EX_SIGNAL) return 0;
/* It must not be an array word. */
if (ivl_expr_oper1(rval)) return 0;
rsig = ivl_expr_signal(rval);
/* The two signals must be the same. */
if (lsig != rsig) return 0;
/* And finally the three statements must have the same line number
* as the block. */
if ((ivl_stmt_lineno(stmt) != ivl_stmt_lineno(assign)) ||
(ivl_stmt_lineno(stmt) != ivl_stmt_lineno(delay)) ||
(ivl_stmt_lineno(stmt) != ivl_stmt_lineno(delayed_assign))) {
return 0;
}
/* The pattern matched so generate the appropriate code. */
fprintf(vlog_out, "%*c", get_indent(), ' ');
wid = emit_stmt_lval(scope, delayed_assign);
fprintf(vlog_out, " = ");
if (delay_type == IVL_ST_DELAYX) {
fprintf(vlog_out, "#(");
emit_scaled_delayx(scope, ivl_stmt_delay_expr(delay), 1);
} else {
fprintf(vlog_out, "@(");
emit_event(scope, delay);
}
fprintf(vlog_out, ") ");
emit_expr(scope, ivl_stmt_rval(assign), wid);
fprintf(vlog_out, ";");
emit_stmt_file_line(stmt);
fprintf(vlog_out, "\n");
return 1;
}
