Exemple #1
0
static void jmr3927_board_init()
{
	char *argptr;

#ifdef CONFIG_PCI
	mips_pci_io_base = JMR3927_PCIIO;
	mips_pci_io_size = JMR3927_PCIIO_SIZE;
	mips_pci_mem_base = JMR3927_PCIMEM;
	mips_pci_mem_size = JMR3927_PCIMEM_SIZE;
#endif

	tx3927_setup();

#ifdef CONFIG_VT
	conswitchp = &dummy_con;
#endif

	if (jmr3927_have_isac()) {

#ifdef CONFIG_FB_E1355
		argptr = prom_getcmdline();
		if ((argptr = strstr(argptr, "video=")) == NULL) {
			argptr = prom_getcmdline();
			strcat(argptr, " video=e1355fb:crt16h");
		}
#endif

#ifdef CONFIG_BLK_DEV_IDE
		/* overrides PCI-IDE */
#endif

#ifdef CONFIG_PC_KEYB
		//not yet kbd_ops = &jmr3927_kbd_ops;
#endif
	}
#ifdef USE_RTC_DS1742
	if (jmr3927_have_nvram()) {
		rtc_ops = &jmr3927_rtc_ops;
	}
#endif

	/* SIO0 DTR on */
	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);

	jmr3927_led_set(0);


	if (jmr3927_have_isac()) 
		jmr3927_io_led_set(0);
	printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
	       jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
	       jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
	       jmr3927_dipsw1(), jmr3927_dipsw2(),
	       jmr3927_dipsw3(), jmr3927_dipsw4());
	if (jmr3927_have_isac())
		printk("JMI-3927IO2 --- ISAC(Rev %d) DIPSW:%01x\n",
		       jmr3927_isac_reg_in(JMR3927_ISAC_REV_ADDR) & JMR3927_REV_MASK,
		       jmr3927_io_dipsw());
}
Exemple #2
0
static void __init jmr3927_board_init(void)
{
	tx3927_setup();

	/* SIO0 DTR on */
	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);

	jmr3927_led_set(0);

	printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
	       jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
	       jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
	       jmr3927_dipsw1(), jmr3927_dipsw2(),
	       jmr3927_dipsw3(), jmr3927_dipsw4());
}
Exemple #3
0
static void __init jmr3927_board_init(void)
{
	txx9_cpu_clock = JMR3927_CORECLK;
	

	
	tx3927_romcptr->cr[1] = JMR3927_ROMCE1 | 0x00030048;
	tx3927_romcptr->cr[2] = JMR3927_ROMCE2 | 0x000064c8;
	tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698;
	tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218;

	
	tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL;
	tx3927_ccfgptr->pcfg |=
		TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL |
		(TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1));

	tx3927_setup();

	
	__raw_writel(0x0000f000, &tx3927_pioptr->dir);
	gpio_request(11, "dipsw1");
	gpio_request(10, "dipsw2");

	jmr3927_pci_setup();

	
	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);

	jmr3927_led_set(0);

	printk(KERN_INFO
	       "JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
	       jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
	       jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
	       jmr3927_dipsw1(), jmr3927_dipsw2(),
	       jmr3927_dipsw3(), jmr3927_dipsw4());
}