gint32
load_image (const gchar *filename,
GimpRunMode runmode,
gboolean preview,
gboolean *resolution_loaded,
GError **error)
{
gint32 volatile image_ID;
gint32 layer_ID;
struct jpeg_decompress_struct cinfo;
struct my_error_mgr jerr;
jpeg_saved_marker_ptr marker;
FILE *infile;
guchar *buf;
guchar **rowbuf;
GimpImageBaseType image_type;
GimpImageType layer_type;
GeglBuffer *buffer = NULL;
const Babl *format;
gint tile_height;
gint scanlines;
gint i, start, end;
cmsHTRANSFORM cmyk_transform = NULL;
/* We set up the normal JPEG error routines. */
cinfo.err = jpeg_std_error (&jerr.pub);
jerr.pub.error_exit = my_error_exit;
if (!preview)
{
jerr.pub.output_message = my_output_message;
gimp_progress_init_printf (_("Opening '%s'"),
gimp_filename_to_utf8 (filename));
}
if ((infile = g_fopen (filename, "rb")) == NULL)
{
g_set_error (error, G_FILE_ERROR, g_file_error_from_errno (errno),
_("Could not open '%s' for reading: %s"),
gimp_filename_to_utf8 (filename), g_strerror (errno));
return -1;
}
image_ID = -1;
/* Establish the setjmp return context for my_error_exit to use. */
if (setjmp (jerr.setjmp_buffer))
{
/* If we get here, the JPEG code has signaled an error.
* We need to clean up the JPEG object, close the input file, and return.
*/
jpeg_destroy_decompress (&cinfo);
if (infile)
fclose (infile);
if (image_ID != -1 && !preview)
gimp_image_delete (image_ID);
if (preview)
destroy_preview ();
if (buffer)
g_object_unref (buffer);
return -1;
}
/* Now we can initialize the JPEG decompression object. */
jpeg_create_decompress (&cinfo);
/* Step 2: specify data source (eg, a file) */
jpeg_stdio_src (&cinfo, infile);
if (! preview)
{
/* - step 2.1: tell the lib to save the comments */
jpeg_save_markers (&cinfo, JPEG_COM, 0xffff);
/* - step 2.2: tell the lib to save APP1 data (Exif or XMP) */
jpeg_save_markers (&cinfo, JPEG_APP0 + 1, 0xffff);
/* - step 2.3: tell the lib to save APP2 data (ICC profiles) */
jpeg_save_markers (&cinfo, JPEG_APP0 + 2, 0xffff);
}
/* Step 3: read file parameters with jpeg_read_header() */
jpeg_read_header (&cinfo, TRUE);
/* We can ignore the return value from jpeg_read_header since
* (a) suspension is not possible with the stdio data source, and
* (b) we passed TRUE to reject a tables-only JPEG file as an error.
* See libjpeg.doc for more info.
*/
/* Step 4: set parameters for decompression */
/* In this example, we don't need to change any of the defaults set by
* jpeg_read_header(), so we do nothing here.
*/
/* Step 5: Start decompressor */
jpeg_start_decompress (&cinfo);
/* We may need to do some setup of our own at this point before reading
* the data. After jpeg_start_decompress() we have the correct scaled
* output image dimensions available, as well as the output colormap
* if we asked for color quantization.
*/
/* temporary buffer */
tile_height = gimp_tile_height ();
buf = g_new (guchar,
tile_height * cinfo.output_width * cinfo.output_components);
rowbuf = g_new (guchar *, tile_height);
for (i = 0; i < tile_height; i++)
rowbuf[i] = buf + cinfo.output_width * cinfo.output_components * i;
switch (cinfo.output_components)
{
case 1:
image_type = GIMP_GRAY;
layer_type = GIMP_GRAY_IMAGE;
break;
case 3:
image_type = GIMP_RGB;
layer_type = GIMP_RGB_IMAGE;
break;
case 4:
if (cinfo.out_color_space == JCS_CMYK)
{
image_type = GIMP_RGB;
layer_type = GIMP_RGB_IMAGE;
break;
}
/*fallthrough*/
default:
g_message ("Don't know how to load JPEG images "
"with %d color channels, using colorspace %d (%d).",
cinfo.output_components, cinfo.out_color_space,
cinfo.jpeg_color_space);
return -1;
break;
}
if (preview)
{
image_ID = preview_image_ID;
}
else
{
image_ID = gimp_image_new_with_precision (cinfo.output_width,
cinfo.output_height,
image_type,
GIMP_PRECISION_U8_GAMMA);
gimp_image_undo_disable (image_ID);
gimp_image_set_filename (image_ID, filename);
}
if (preview)
{
preview_layer_ID = gimp_layer_new (preview_image_ID, _("JPEG preview"),
cinfo.output_width,
cinfo.output_height,
layer_type, 100, GIMP_NORMAL_MODE);
layer_ID = preview_layer_ID;
}
else
{
layer_ID = gimp_layer_new (image_ID, _("Background"),
cinfo.output_width,
cinfo.output_height,
layer_type, 100, GIMP_NORMAL_MODE);
}
if (! preview)
{
GString *comment_buffer = NULL;
guint8 *profile = NULL;
guint profile_size = 0;
/* Step 5.0: save the original JPEG settings in a parasite */
jpeg_detect_original_settings (&cinfo, image_ID);
/* Step 5.1: check for comments, or Exif metadata in APP1 markers */
for (marker = cinfo.marker_list; marker; marker = marker->next)
{
const gchar *data = (const gchar *) marker->data;
gsize len = marker->data_length;
if (marker->marker == JPEG_COM)
{
#ifdef GIMP_UNSTABLE
g_print ("jpeg-load: found image comment (%d bytes)\n",
marker->data_length);
#endif
if (! comment_buffer)
{
comment_buffer = g_string_new_len (data, len);
}
else
{
/* concatenate multiple comments, separate them with LF */
g_string_append_c (comment_buffer, '\n');
g_string_append_len (comment_buffer, data, len);
}
}
else if ((marker->marker == JPEG_APP0 + 1)
&& (len > sizeof (JPEG_APP_HEADER_EXIF) + 8)
&& ! strcmp (JPEG_APP_HEADER_EXIF, data))
{
#ifdef GIMP_UNSTABLE
g_print ("jpeg-load: found Exif block (%d bytes)\n",
(gint) (len - sizeof (JPEG_APP_HEADER_EXIF)));
#endif
}
}
if (jpeg_load_resolution (image_ID, &cinfo))
{
if (resolution_loaded)
*resolution_loaded = TRUE;
}
/* if we found any comments, then make a parasite for them */
if (comment_buffer && comment_buffer->len)
{
GimpParasite *parasite;
jpeg_load_sanitize_comment (comment_buffer->str);
parasite = gimp_parasite_new ("gimp-comment",
GIMP_PARASITE_PERSISTENT,
strlen (comment_buffer->str) + 1,
comment_buffer->str);
gimp_image_attach_parasite (image_ID, parasite);
gimp_parasite_free (parasite);
g_string_free (comment_buffer, TRUE);
}
/* Step 5.3: check for an embedded ICC profile in APP2 markers */
jpeg_icc_read_profile (&cinfo, &profile, &profile_size);
if (cinfo.out_color_space == JCS_CMYK)
{
cmyk_transform = jpeg_load_cmyk_transform (profile, profile_size);
}
else if (profile) /* don't attach the profile if we are transforming */
{
GimpParasite *parasite;
parasite = gimp_parasite_new ("icc-profile",
GIMP_PARASITE_PERSISTENT |
GIMP_PARASITE_UNDOABLE,
profile_size, profile);
gimp_image_attach_parasite (image_ID, parasite);
gimp_parasite_free (parasite);
}
g_free (profile);
/* Do not attach the "jpeg-save-options" parasite to the image
* because this conflicts with the global defaults (bug #75398).
*/
}
/* Step 6: while (scan lines remain to be read) */
/* jpeg_read_scanlines(...); */
/* Here we use the library's state variable cinfo.output_scanline as the
* loop counter, so that we don't have to keep track ourselves.
*/
buffer = gimp_drawable_get_buffer (layer_ID);
format = babl_format (image_type == GIMP_RGB ? "R'G'B' u8" : "Y' u8");
while (cinfo.output_scanline < cinfo.output_height)
{
start = cinfo.output_scanline;
end = cinfo.output_scanline + tile_height;
end = MIN (end, cinfo.output_height);
scanlines = end - start;
for (i = 0; i < scanlines; i++)
jpeg_read_scanlines (&cinfo, (JSAMPARRAY) &rowbuf[i], 1);
if (cinfo.out_color_space == JCS_CMYK)
jpeg_load_cmyk_to_rgb (buf, cinfo.output_width * scanlines,
cmyk_transform);
gegl_buffer_set (buffer,
GEGL_RECTANGLE (0, start, cinfo.output_width, scanlines),
0,
format,
buf,
GEGL_AUTO_ROWSTRIDE);
if (! preview && (cinfo.output_scanline % 32) == 0)
gimp_progress_update ((gdouble) cinfo.output_scanline /
(gdouble) cinfo.output_height);
}
/* Step 7: Finish decompression */
jpeg_finish_decompress (&cinfo);
/* We can ignore the return value since suspension is not possible
* with the stdio data source.
*/
if (cmyk_transform)
cmsDeleteTransform (cmyk_transform);
/* Step 8: Release JPEG decompression object */
/* This is an important step since it will release a good deal of memory. */
jpeg_destroy_decompress (&cinfo);
g_object_unref (buffer);
/* free up the temporary buffers */
g_free (rowbuf);
g_free (buf);
/* After finish_decompress, we can close the input file.
* Here we postpone it until after no more JPEG errors are possible,
* so as to simplify the setjmp error logic above. (Actually, I don't
* think that jpeg_destroy can do an error exit, but why assume anything...)
*/
fclose (infile);
/* At this point you may want to check to see whether any corrupt-data
* warnings occurred (test whether jerr.num_warnings is nonzero).
*/
/* Detach from the drawable and add it to the image.
*/
if (! preview)
{
gimp_progress_update (1.0);
}
gimp_image_insert_layer (image_ID, layer_ID, -1, 0);
return image_ID;
}
gint32
load_thumbnail_image (const gchar *filename,
gint *width,
gint *height,
GError **error)
{
gint32 volatile image_ID;
ExifData *exif_data;
GimpPixelRgn pixel_rgn;
GimpDrawable *drawable;
gint32 layer_ID;
struct jpeg_decompress_struct cinfo;
struct my_error_mgr jerr;
guchar *buf;
guchar **rowbuf;
gint image_type;
gint layer_type;
gint tile_height;
gint scanlines;
gint i, start, end;
gint orientation;
my_src_ptr src;
FILE *infile;
image_ID = -1;
exif_data = jpeg_exif_data_new_from_file (filename, NULL);
if (! ((exif_data) && (exif_data->data) && (exif_data->size > 0)))
return -1;
orientation = jpeg_exif_get_orientation (exif_data);
cinfo.err = jpeg_std_error (&jerr.pub);
jerr.pub.error_exit = my_error_exit;
jerr.pub.output_message = my_output_message;
gimp_progress_init_printf (_("Opening thumbnail for '%s'"),
gimp_filename_to_utf8 (filename));
/* Establish the setjmp return context for my_error_exit to use. */
if (setjmp (jerr.setjmp_buffer))
{
/* If we get here, the JPEG code has signaled an error. We
* need to clean up the JPEG object, close the input file,
* and return.
*/
jpeg_destroy_decompress (&cinfo);
if (image_ID != -1)
gimp_image_delete (image_ID);
if (exif_data)
{
exif_data_unref (exif_data);
exif_data = NULL;
}
return -1;
}
/* Now we can initialize the JPEG decompression object. */
jpeg_create_decompress (&cinfo);
/* Step 2: specify data source (eg, a file) */
if (cinfo.src == NULL)
cinfo.src = (struct jpeg_source_mgr *)(*cinfo.mem->alloc_small)
((j_common_ptr) &cinfo, JPOOL_PERMANENT,
sizeof (my_source_mgr));
src = (my_src_ptr) cinfo.src;
src->pub.init_source = init_source;
src->pub.fill_input_buffer = fill_input_buffer;
src->pub.skip_input_data = skip_input_data;
src->pub.resync_to_restart = jpeg_resync_to_restart;
src->pub.term_source = term_source;
src->pub.bytes_in_buffer = exif_data->size;
src->pub.next_input_byte = exif_data->data;
src->buffer = exif_data->data;
src->size = exif_data->size;
/* Step 3: read file parameters with jpeg_read_header() */
jpeg_read_header (&cinfo, TRUE);
/* Step 4: set parameters for decompression */
/* In this example, we don't need to change any of the defaults set by
* jpeg_read_header(), so we do nothing here.
*/
/* Step 5: Start decompressor */
jpeg_start_decompress (&cinfo);
/* We may need to do some setup of our own at this point before
* reading the data. After jpeg_start_decompress() we have the
* correct scaled output image dimensions available, as well as
* the output colormap if we asked for color quantization. In
* this example, we need to make an output work buffer of the
* right size.
*/
/* temporary buffer */
tile_height = gimp_tile_height ();
buf = g_new (guchar,
tile_height * cinfo.output_width * cinfo.output_components);
rowbuf = g_new (guchar *, tile_height);
for (i = 0; i < tile_height; i++)
rowbuf[i] = buf + cinfo.output_width * cinfo.output_components * i;
/* Create a new image of the proper size and associate the
* filename with it.
*/
switch (cinfo.output_components)
{
case 1:
image_type = GIMP_GRAY;
layer_type = GIMP_GRAY_IMAGE;
break;
case 3:
image_type = GIMP_RGB;
layer_type = GIMP_RGB_IMAGE;
break;
case 4:
if (cinfo.out_color_space == JCS_CMYK)
{
image_type = GIMP_RGB;
layer_type = GIMP_RGB_IMAGE;
break;
}
/*fallthrough*/
default:
g_message ("Don't know how to load JPEG images "
"with %d color channels, using colorspace %d (%d).",
cinfo.output_components, cinfo.out_color_space,
cinfo.jpeg_color_space);
if (exif_data)
{
exif_data_unref (exif_data);
exif_data = NULL;
}
return -1;
break;
}
image_ID = gimp_image_new (cinfo.output_width, cinfo.output_height,
image_type);
gimp_image_undo_disable (image_ID);
gimp_image_set_filename (image_ID, filename);
jpeg_load_resolution (image_ID, &cinfo);
layer_ID = gimp_layer_new (image_ID, _("Background"),
cinfo.output_width,
cinfo.output_height,
layer_type, 100, GIMP_NORMAL_MODE);
drawable_global = drawable = gimp_drawable_get (layer_ID);
gimp_pixel_rgn_init (&pixel_rgn, drawable, 0, 0,
drawable->width, drawable->height, TRUE, FALSE);
/* Step 6: while (scan lines remain to be read) */
/* jpeg_read_scanlines(...); */
/* Here we use the library's state variable cinfo.output_scanline as the
* loop counter, so that we don't have to keep track ourselves.
*/
while (cinfo.output_scanline < cinfo.output_height)
{
start = cinfo.output_scanline;
end = cinfo.output_scanline + tile_height;
end = MIN (end, cinfo.output_height);
scanlines = end - start;
for (i = 0; i < scanlines; i++)
jpeg_read_scanlines (&cinfo, (JSAMPARRAY) &rowbuf[i], 1);
if (cinfo.out_color_space == JCS_CMYK)
jpeg_load_cmyk_to_rgb (buf, drawable->width * scanlines, NULL);
gimp_pixel_rgn_set_rect (&pixel_rgn, buf,
0, start, drawable->width, scanlines);
gimp_progress_update ((gdouble) cinfo.output_scanline /
(gdouble) cinfo.output_height);
}
/* Step 7: Finish decompression */
jpeg_finish_decompress (&cinfo);
/* We can ignore the return value since suspension is not possible
* with the stdio data source.
*/
/* Step 8: Release JPEG decompression object */
/* This is an important step since it will release a good deal
* of memory.
*/
jpeg_destroy_decompress (&cinfo);
/* free up the temporary buffers */
g_free (rowbuf);
g_free (buf);
/* At this point you may want to check to see whether any
* corrupt-data warnings occurred (test whether
* jerr.num_warnings is nonzero).
*/
gimp_image_insert_layer (image_ID, layer_ID, -1, 0);
/* NOW to get the dimensions of the actual image to return the
* calling app
*/
cinfo.err = jpeg_std_error (&jerr.pub);
jerr.pub.error_exit = my_error_exit;
jerr.pub.output_message = my_output_message;
if ((infile = g_fopen (filename, "rb")) == NULL)
{
g_set_error (error, G_FILE_ERROR, g_file_error_from_errno (errno),
_("Could not open '%s' for reading: %s"),
gimp_filename_to_utf8 (filename), g_strerror (errno));
if (exif_data)
{
exif_data_unref (exif_data);
exif_data = NULL;
}
return -1;
}
/* Establish the setjmp return context for my_error_exit to use. */
if (setjmp (jerr.setjmp_buffer))
{
/* If we get here, the JPEG code has signaled an error. We
* need to clean up the JPEG object, close the input file,
* and return.
*/
jpeg_destroy_decompress (&cinfo);
if (image_ID != -1)
gimp_image_delete (image_ID);
if (exif_data)
{
exif_data_unref (exif_data);
exif_data = NULL;
}
return -1;
}
/* Now we can initialize the JPEG decompression object. */
jpeg_create_decompress (&cinfo);
/* Step 2: specify data source (eg, a file) */
jpeg_stdio_src (&cinfo, infile);
/* Step 3: read file parameters with jpeg_read_header() */
jpeg_read_header (&cinfo, TRUE);
jpeg_start_decompress (&cinfo);
*width = cinfo.output_width;
*height = cinfo.output_height;
/* Step 4: Release JPEG decompression object */
/* This is an important step since it will release a good deal
* of memory.
*/
jpeg_destroy_decompress (&cinfo);
fclose (infile);
if (exif_data)
{
exif_data_unref (exif_data);
exif_data = NULL;
}
jpeg_exif_rotate (image_ID, orientation);
return image_ID;
}
