/*! \reimp
Connects to QNX's io-display based device based on the \a displaySpec parameters
from the \c{QWS_DISPLAY} environment variable. See the QQnxScreen class documentation
for possible parameters.
\sa QQnxScreen
*/
bool QQnxScreen::connect(const QString &displaySpec)
{
const QStringList params = displaySpec.split(QLatin1Char(':'), QString::SkipEmptyParts);
bool isOk = false;
QRegExp deviceRegExp(QLatin1String("^device=(.+)$"));
if (params.indexOf(deviceRegExp) != -1) {
isOk = attachDevice(d, deviceRegExp.cap(1).toLocal8Bit().constData());
} else {
// no device specified - attach to device 0 (the default)
isOk = attachDevice(d, GF_DEVICE_INDEX(0));
}
if (!isOk)
return false;
qDebug("QQnxScreen: Attached to Device, number of displays: %d", d->deviceInfo.ndisplays);
// default to display 0
int displayIndex = 0;
QRegExp displayRegexp(QLatin1String("^display=(\\d+)$"));
if (params.indexOf(displayRegexp) != -1) {
displayIndex = displayRegexp.cap(1).toInt();
}
if (!attachDisplay(d, displayIndex))
return false;
qDebug("QQnxScreen: Attached to Display %d, resolution %dx%d, refresh %d Hz",
displayIndex, d->displayInfo.xres, d->displayInfo.yres,
d->displayInfo.refresh);
// default to main_layer_index from the displayInfo struct
int layerIndex = 0;
QRegExp layerRegexp(QLatin1String("^layer=(\\d+)$"));
if (params.indexOf(layerRegexp) != -1) {
layerIndex = layerRegexp.cap(1).toInt();
} else {
layerIndex = d->displayInfo.main_layer_index;
}
if (!attachLayer(d, layerIndex))
return false;
// tell QWSDisplay the width and height of the display
w = dw = d->displayInfo.xres;
h = dh = d->displayInfo.yres;
// we only support 32 bit displays for now.
QScreen::d = 32;
// assume 72 dpi as default, to calculate the physical dimensions if not specified
const int defaultDpi = 72;
// Handle display physical size spec.
QRegExp mmWidthRegexp(QLatin1String("^mmWidth=(\\d+)$"));
if (params.indexOf(mmWidthRegexp) == -1) {
physWidth = qRound(dw * 25.4 / defaultDpi);
} else {
physWidth = mmWidthRegexp.cap(1).toInt();
}
QRegExp mmHeightRegexp(QLatin1String("^mmHeight=(\\d+)$"));
if (params.indexOf(mmHeightRegexp) == -1) {
physHeight = qRound(dh * 25.4 / defaultDpi);
} else {
physHeight = mmHeightRegexp.cap(1).toInt();
}
// create a hardware surface with our dimensions. In the old days, it was possible
// to get a pointer directly to the hw surface, so we could blit directly. Now, we
// have to use one indirection more, because it's not guaranteed that the hw surface
// is mappable into our process.
if (!createHwSurface(d, w, h))
return false;
// create an in-memory linear surface that is used by QWS. QWS will blit directly in here.
if (!createMemSurface(d, w, h))
return false;
// set the address of the in-memory buffer that QWS is blitting to
data = d->memSurfaceInfo.vaddr;
// set the line stepping
lstep = d->memSurfaceInfo.stride;
// the overall size of the in-memory buffer is linestep * height
size = mapsize = lstep * h;
// create a QNX drawing context
if (!createContext(d))
return false;
// we're always using a software cursor for now. Initialize it here.
QScreenCursor::initSoftwareCursor();
// done, the driver should be connected to the display now.
return true;
}
/*!
\reimp
Connects to QNX's io-display based device based on the \a displaySpec parameters
from the \c{QWS_DISPLAY} environment variable. See the QQnxScreen class documentation
for possible parameters.
\sa QQnxScreen
*/
bool QQnxScreen::connect(const QString &displaySpec)
{
const QStringList params = displaySpec.split(QLatin1Char(':'), QString::SkipEmptyParts);
// default to device 0
int deviceIndex = 0;
if (!params.isEmpty()) {
QRegExp deviceRegExp(QLatin1String("^device=(.+)$"));
if (params.indexOf(deviceRegExp) != -1)
deviceIndex = deviceRegExp.cap(1).toInt();
}
if (!attachDevice(d, GF_DEVICE_INDEX(deviceIndex)))
return false;
qDebug("QQnxScreen: Attached to Device, number of displays: %d", d->deviceInfo.ndisplays);
// default to display id passed to constructor
int displayIndex = displayId;
if (!params.isEmpty()) {
QRegExp displayRegexp(QLatin1String("^display=(\\d+)$"));
if (params.indexOf(displayRegexp) != -1)
displayIndex = displayRegexp.cap(1).toInt();
}
if (!attachDisplay(d, displayIndex))
return false;
qDebug("QQnxScreen: Attached to Display %d, resolution %dx%d, refresh %d Hz",
displayIndex, d->displayInfo.xres, d->displayInfo.yres, d->displayInfo.refresh);
// default to main_layer_index from the displayInfo struct
int layerIndex = d->displayInfo.main_layer_index;
if (!params.isEmpty()) {
QRegExp layerRegexp(QLatin1String("^layer=(\\d+)$"));
if (params.indexOf(layerRegexp) != -1)
layerIndex = layerRegexp.cap(1).toInt();
}
if (!attachLayer(d, layerIndex))
return false;
// determine the pixel format and the pixel type
switch (d->displayInfo.format) {
#if defined(QT_QWS_DEPTH_32) || defined(QT_QWS_DEPTH_GENERIC)
case GF_FORMAT_ARGB8888:
pixeltype = QScreen::BGRPixel;
// fall through
case GF_FORMAT_BGRA8888:
setPixelFormat(QImage::Format_ARGB32);
break;
#endif
#if defined(QT_QWS_DEPTH_24)
case GF_FORMAT_BGR888:
pixeltype = QScreen::BGRPixel;
setPixelFormat(QImage::Format_RGB888);
break;
#endif
#if defined(QT_QWS_DEPTH_16) || defined(QT_QWS_DEPTH_GENERIC)
case GF_FORMAT_PACK_RGB565:
case GF_FORMAT_PKLE_RGB565:
case GF_FORMAT_PKBE_RGB565:
#if Q_BYTE_ORDER == Q_BIG_ENDIAN
setFrameBufferLittleEndian((d->displayInfo.format & GF_FORMAT_PKLE) == GF_FORMAT_PKLE);
#endif
setPixelFormat(QImage::Format_RGB16);
break;
#endif
default:
return false;
}
// tell QWSDisplay the width and height of the display
w = dw = d->displayInfo.xres;
h = dh = d->displayInfo.yres;
QScreen::d = (d->displayInfo.format & GF_FORMAT_BPP); // colour depth
// assume 72 dpi as default, to calculate the physical dimensions if not specified
const int defaultDpi = 72;
// Handle display physical size
physWidth = qRound(dw * 25.4 / defaultDpi);
physHeight = qRound(dh * 25.4 / defaultDpi);
if (!params.isEmpty()) {
QRegExp mmWidthRegexp(QLatin1String("^mmWidth=(\\d+)$"));
if (params.indexOf(mmWidthRegexp) != -1)
physWidth = mmWidthRegexp.cap(1).toInt();
QRegExp mmHeightRegexp(QLatin1String("^mmHeight=(\\d+)$"));
if (params.indexOf(mmHeightRegexp) != -1)
physHeight = mmHeightRegexp.cap(1).toInt();
}
if (QApplication::type() == QApplication::GuiServer) {
// create a hardware surface with our dimensions. In the old days, it was possible
// to get a pointer directly to the hw surface, so we could blit directly. Now, we
// have to use one indirection more, because it's not guaranteed that the hw surface
// is mappable into our process.
if (!createHwSurface(d, w, h))
return false;
}
// create an in-memory linear surface that is used by QWS. QWS will blit directly in here.
if (!createMemSurface(d, w, h))
return false;
// set the address of the in-memory buffer that QWS is blitting to
data = d->memSurfaceInfo.vaddr;
// set the line stepping
lstep = d->memSurfaceInfo.stride;
// the overall size of the in-memory buffer is linestep * height
size = mapsize = lstep * h;
// done, the driver should be connected to the display now.
return true;
}