/* ARGSUSED */
static int
_raw_open(char *path, int flag, blind_t *cdp, void *iodev)
{
struct cred *cred;
raw_dev_t *cdi = NULL;
char *spath;
dev_t rdev;
int rc, cd, the_cd;
int plen;
ldi_ident_t li;
if (proc_nskernd == NULL) {
cmn_err(CE_WARN, "nskern: no nskernd daemon running!");
return (ENXIO);
}
if (_nsc_raw_maxdevs == 0) {
cmn_err(CE_WARN, "nskern: _raw_open() before _nsc_init_raw()!");
return (ENXIO);
}
plen = strlen(path) + 1;
spath = kmem_alloc(plen, KM_SLEEP);
if (spath == NULL) {
cmn_err(CE_WARN,
"nskern: unable to alloc memory in _raw_open()");
return (ENOMEM);
}
(void) strcpy(spath, path);
/*
* Lookup the vnode to extract the dev_t info,
* then release the vnode.
*/
if ((rdev = ldi_get_dev_t_from_path(path)) == 0) {
kmem_free(spath, plen);
return (ENXIO);
}
/*
* See if this device is already opened
*/
the_cd = -1;
mutex_enter(&_nsc_raw_lock);
for (cd = 0, cdi = _nsc_raw_files; cd < fd_hwm; cd++, cdi++) {
if (rdev == cdi->rdev) {
the_cd = cd;
break;
} else if (the_cd == -1 && !cdi->in_use)
the_cd = cd;
}
if (the_cd == -1) {
if (fd_hwm < _nsc_raw_maxdevs)
the_cd = fd_hwm++;
else {
mutex_exit(&_nsc_raw_lock);
cmn_err(CE_WARN, "_raw_open: too many open devices");
kmem_free(spath, plen);
return (EIO);
}
}
cdi = &_nsc_raw_files[the_cd];
if (cdi->in_use) {
/* already set up - just return */
mutex_exit(&_nsc_raw_lock);
*cdp = (blind_t)cdi->rdev;
kmem_free(spath, plen);
return (0);
}
cdi->partition = -1;
cdi->size = (uint64_t)0;
cdi->rdev = rdev;
cdi->path = spath;
cdi->plen = plen;
cred = ddi_get_cred();
/*
* Layered driver
*
* We use xxx_open_by_dev() since this guarantees that a
* specfs vnode is created and used, not a standard filesystem
* vnode. This is necessary since in a cluster PXFS will block
* vnode operations during switchovers, so we have to use the
* underlying specfs vnode not the PXFS vnode.
*
*/
if ((rc = ldi_ident_from_dev(cdi->rdev, &li)) == 0) {
rc = ldi_open_by_dev(&cdi->rdev,
OTYP_BLK, FREAD|FWRITE, cred, &cdi->lh, li);
}
if (rc != 0) {
cdi->lh = NULL;
goto failed;
}
/*
* grab the major_t related information
*/
cdi->major = _raw_get_maj_info(getmajor(rdev));
if (cdi->major == NULL) {
/* Out of memory */
cmn_err(CE_WARN,
"_raw_open: cannot alloc major number structure");
rc = ENOMEM;
goto failed;
}
*cdp = (blind_t)cdi->rdev;
cdi->in_use++;
mutex_exit(&_nsc_raw_lock);
return (rc);
failed:
if (cdi->lh)
(void) ldi_close(cdi->lh, FWRITE|FREAD, cred);
bzero(cdi, sizeof (*cdi));
mutex_exit(&_nsc_raw_lock);
kmem_free(spath, plen);
return (rc);
}
static int
vdev_disk_open(vdev_t *vd, uint64_t *psize, uint64_t *max_psize,
uint64_t *ashift)
{
spa_t *spa = vd->vdev_spa;
vdev_disk_t *dvd;
ldi_ev_cookie_t ecookie;
vdev_disk_ldi_cb_t *lcb;
union {
struct dk_minfo_ext ude;
struct dk_minfo ud;
} dks;
struct dk_minfo_ext *dkmext = &dks.ude;
struct dk_minfo *dkm = &dks.ud;
int error;
dev_t dev;
int otyp;
boolean_t validate_devid = B_FALSE;
ddi_devid_t devid;
uint64_t capacity = 0, blksz = 0, pbsize;
/*
* We must have a pathname, and it must be absolute.
*/
if (vd->vdev_path == NULL || vd->vdev_path[0] != '/') {
vd->vdev_stat.vs_aux = VDEV_AUX_BAD_LABEL;
return (SET_ERROR(EINVAL));
}
rw_enter(&vd->vdev_tsd_lock, RW_WRITER);
dvd = vd->vdev_tsd;
/*
* Reopen the device if it's not currently open. Otherwise,
* just update the physical size of the device.
*/
if (dvd != NULL) {
ASSERT(vd->vdev_reopening);
/*
* Here vd_lh is protected by vdev_tsd_lock
*/
ASSERT(dvd->vd_lh != NULL);
/* This should not happen, but let's be safe */
if (dvd->vd_lh == NULL) {
/* What are we going to do here??? */
rw_exit(&vd->vdev_tsd_lock);
return (SET_ERROR(ENXIO));
}
goto skip_open;
}
/*
* Create dvd to be used as vd->vdev_tsd.
*/
vd->vdev_tsd = dvd = vdev_disk_alloc();
/*
* When opening a disk device, we want to preserve the user's original
* intent. We always want to open the device by the path the user gave
* us, even if it is one of multiple paths to the same device. But we
* also want to be able to survive disks being removed/recabled.
* Therefore the sequence of opening devices is:
*
* 1. Try opening the device by path. For legacy pools without the
* 'whole_disk' property, attempt to fix the path by appending 's0'.
*
* 2. If the devid of the device matches the stored value, return
* success.
*
* 3. Otherwise, the device may have moved. Try opening the device
* by the devid instead.
*/
if (vd->vdev_devid != NULL) {
if (ddi_devid_str_decode(vd->vdev_devid, &dvd->vd_devid,
&dvd->vd_minor) != 0) {
vd->vdev_stat.vs_aux = VDEV_AUX_BAD_LABEL;
vdev_disk_free_locked(vd);
rw_exit(&vd->vdev_tsd_lock);
return (SET_ERROR(EINVAL));
}
}
error = EINVAL; /* presume failure */
if (vd->vdev_path != NULL) {
if (vd->vdev_wholedisk == -1ULL) {
size_t len = strlen(vd->vdev_path) + 3;
char *buf = kmem_alloc(len, KM_SLEEP);
(void) snprintf(buf, len, "%ss0", vd->vdev_path);
error = ldi_open_by_name(buf, spa_mode(spa), kcred,
&dvd->vd_lh, zfs_li);
if (error == 0) {
spa_strfree(vd->vdev_path);
vd->vdev_path = buf;
vd->vdev_wholedisk = 1ULL;
} else {
kmem_free(buf, len);
}
}
/*
* If we have not yet opened the device, try to open it by the
* specified path.
*/
if (error != 0) {
error = ldi_open_by_name(vd->vdev_path, spa_mode(spa),
kcred, &dvd->vd_lh, zfs_li);
}
/*
* Compare the devid to the stored value.
*/
if (error == 0 && vd->vdev_devid != NULL &&
ldi_get_devid(dvd->vd_lh, &devid) == 0) {
if (ddi_devid_compare(devid, dvd->vd_devid) != 0) {
error = SET_ERROR(EINVAL);
(void) ldi_close(dvd->vd_lh, spa_mode(spa),
kcred);
dvd->vd_lh = NULL;
}
ddi_devid_free(devid);
}
/*
* If we succeeded in opening the device, but 'vdev_wholedisk'
* is not yet set, then this must be a slice.
*/
if (error == 0 && vd->vdev_wholedisk == -1ULL)
vd->vdev_wholedisk = 0;
}
/*
* If we were unable to open by path, or the devid check fails, open by
* devid instead.
*/
if (error != 0 && vd->vdev_devid != NULL) {
error = ldi_open_by_devid(dvd->vd_devid, dvd->vd_minor,
spa_mode(spa), kcred, &dvd->vd_lh, zfs_li);
}
/*
* If all else fails, then try opening by physical path (if available)
* or the logical path (if we failed due to the devid check). While not
* as reliable as the devid, this will give us something, and the higher
* level vdev validation will prevent us from opening the wrong device.
*/
if (error) {
if (vd->vdev_devid != NULL)
validate_devid = B_TRUE;
if (vd->vdev_physpath != NULL &&
(dev = ddi_pathname_to_dev_t(vd->vdev_physpath)) != NODEV)
error = ldi_open_by_dev(&dev, OTYP_BLK, spa_mode(spa),
kcred, &dvd->vd_lh, zfs_li);
/*
* Note that we don't support the legacy auto-wholedisk support
* as above. This hasn't been used in a very long time and we
* don't need to propagate its oddities to this edge condition.
*/
if (error && vd->vdev_path != NULL)
error = ldi_open_by_name(vd->vdev_path, spa_mode(spa),
kcred, &dvd->vd_lh, zfs_li);
}
if (error) {
vd->vdev_stat.vs_aux = VDEV_AUX_OPEN_FAILED;
vdev_disk_free_locked(vd);
rw_exit(&vd->vdev_tsd_lock);
return (error);
}
/*
* Now that the device has been successfully opened, update the devid
* if necessary.
*/
if (validate_devid && spa_writeable(spa) &&
ldi_get_devid(dvd->vd_lh, &devid) == 0) {
if (ddi_devid_compare(devid, dvd->vd_devid) != 0) {
char *vd_devid;
vd_devid = ddi_devid_str_encode(devid, dvd->vd_minor);
zfs_dbgmsg("vdev %s: update devid from %s, "
"to %s", vd->vdev_path, vd->vdev_devid, vd_devid);
spa_strfree(vd->vdev_devid);
vd->vdev_devid = spa_strdup(vd_devid);
ddi_devid_str_free(vd_devid);
}
ddi_devid_free(devid);
}
/*
* Once a device is opened, verify that the physical device path (if
* available) is up to date.
*/
if (ldi_get_dev(dvd->vd_lh, &dev) == 0 &&
ldi_get_otyp(dvd->vd_lh, &otyp) == 0) {
char *physpath, *minorname;
physpath = kmem_alloc(MAXPATHLEN, KM_SLEEP);
minorname = NULL;
if (ddi_dev_pathname(dev, otyp, physpath) == 0 &&
ldi_get_minor_name(dvd->vd_lh, &minorname) == 0 &&
(vd->vdev_physpath == NULL ||
strcmp(vd->vdev_physpath, physpath) != 0)) {
if (vd->vdev_physpath)
spa_strfree(vd->vdev_physpath);
(void) strlcat(physpath, ":", MAXPATHLEN);
(void) strlcat(physpath, minorname, MAXPATHLEN);
vd->vdev_physpath = spa_strdup(physpath);
}
if (minorname)
kmem_free(minorname, strlen(minorname) + 1);
kmem_free(physpath, MAXPATHLEN);
}
/*
* Register callbacks for the LDI offline event.
*/
if (ldi_ev_get_cookie(dvd->vd_lh, LDI_EV_OFFLINE, &ecookie) ==
LDI_EV_SUCCESS) {
lcb = kmem_zalloc(sizeof (vdev_disk_ldi_cb_t), KM_SLEEP);
list_insert_tail(&dvd->vd_ldi_cbs, lcb);
(void) ldi_ev_register_callbacks(dvd->vd_lh, ecookie,
&vdev_disk_off_callb, (void *) vd, &lcb->lcb_id);
}
/*
* Register callbacks for the LDI degrade event.
*/
if (ldi_ev_get_cookie(dvd->vd_lh, LDI_EV_DEGRADE, &ecookie) ==
LDI_EV_SUCCESS) {
lcb = kmem_zalloc(sizeof (vdev_disk_ldi_cb_t), KM_SLEEP);
list_insert_tail(&dvd->vd_ldi_cbs, lcb);
(void) ldi_ev_register_callbacks(dvd->vd_lh, ecookie,
&vdev_disk_dgrd_callb, (void *) vd, &lcb->lcb_id);
}
/* Reset TRIM flag, as underlying device support may have changed */
vd->vdev_notrim = B_FALSE;
skip_open:
ASSERT(dvd != NULL);
/*
* Determine the actual size of the device.
*/
if (ldi_get_size(dvd->vd_lh, psize) != 0) {
vd->vdev_stat.vs_aux = VDEV_AUX_OPEN_FAILED;
vdev_disk_free_locked(vd);
rw_exit(&vd->vdev_tsd_lock);
return (SET_ERROR(EINVAL));
}
*max_psize = *psize;
/*
* Determine the device's minimum transfer size.
* If the ioctl isn't supported, assume DEV_BSIZE.
*/
if ((error = ldi_ioctl(dvd->vd_lh, DKIOCGMEDIAINFOEXT,
(intptr_t)dkmext, FKIOCTL, kcred, NULL)) == 0) {
capacity = dkmext->dki_capacity - 1;
blksz = dkmext->dki_lbsize;
pbsize = dkmext->dki_pbsize;
} else if ((error = ldi_ioctl(dvd->vd_lh, DKIOCGMEDIAINFO,
(intptr_t)dkm, FKIOCTL, kcred, NULL)) == 0) {
VDEV_DEBUG(
"vdev_disk_open(\"%s\"): fallback to DKIOCGMEDIAINFO\n",
vd->vdev_path);
capacity = dkm->dki_capacity - 1;
blksz = dkm->dki_lbsize;
pbsize = blksz;
} else {
VDEV_DEBUG("vdev_disk_open(\"%s\"): "
"both DKIOCGMEDIAINFO{,EXT} calls failed, %d\n",
vd->vdev_path, error);
pbsize = DEV_BSIZE;
}
*ashift = highbit64(MAX(pbsize, SPA_MINBLOCKSIZE)) - 1;
if (vd->vdev_wholedisk == 1) {
int wce = 1;
if (error == 0) {
/*
* If we have the capability to expand, we'd have
* found out via success from DKIOCGMEDIAINFO{,EXT}.
* Adjust max_psize upward accordingly since we know
* we own the whole disk now.
*/
*max_psize += vdev_disk_get_space(vd, capacity, blksz);
zfs_dbgmsg("capacity change: vdev %s, psize %llu, "
"max_psize %llu", vd->vdev_path, *psize,
*max_psize);
}
/*
* Since we own the whole disk, try to enable disk write
* caching. We ignore errors because it's OK if we can't do it.
*/
(void) ldi_ioctl(dvd->vd_lh, DKIOCSETWCE, (intptr_t)&wce,
FKIOCTL, kcred, NULL);
}
/*
* We are done with vd_lh and vdev_tsd, release the vdev_tsd_lock
*/
rw_exit(&vd->vdev_tsd_lock);
/*
* Clear the nowritecache bit, so that on a vdev_reopen() we will
* try again.
*/
vd->vdev_nowritecache = B_FALSE;
return (0);
}
static int
vdev_disk_open(vdev_t *vd, uint64_t *psize, uint64_t *max_psize,
uint64_t *ashift)
{
spa_t *spa = vd->vdev_spa;
vdev_disk_t *dvd = vd->vdev_tsd;
ldi_ev_cookie_t ecookie;
vdev_disk_ldi_cb_t *lcb;
union {
struct dk_minfo_ext ude;
struct dk_minfo ud;
} dks;
struct dk_minfo_ext *dkmext = &dks.ude;
struct dk_minfo *dkm = &dks.ud;
int error;
/* XXX Apple - must leave devid unchanged */
#ifdef illumos
dev_t dev;
int otyp;
boolean_t validate_devid = B_FALSE;
ddi_devid_t devid;
#endif
uint64_t capacity = 0, blksz = 0, pbsize;
#ifdef __APPLE__
int isssd;
#endif
/*
* We must have a pathname, and it must be absolute.
*/
if (vd->vdev_path == NULL || vd->vdev_path[0] != '/') {
vd->vdev_stat.vs_aux = VDEV_AUX_BAD_LABEL;
return (SET_ERROR(EINVAL));
}
/*
* Reopen the device if it's not currently open. Otherwise,
* just update the physical size of the device.
*/
if (dvd != NULL) {
if (dvd->vd_ldi_offline && dvd->vd_lh == NULL) {
/*
* If we are opening a device in its offline notify
* context, the LDI handle was just closed. Clean
* up the LDI event callbacks and free vd->vdev_tsd.
*/
vdev_disk_free(vd);
} else {
ASSERT(vd->vdev_reopening);
goto skip_open;
}
}
/*
* Create vd->vdev_tsd.
*/
vdev_disk_alloc(vd);
dvd = vd->vdev_tsd;
/*
* When opening a disk device, we want to preserve the user's original
* intent. We always want to open the device by the path the user gave
* us, even if it is one of multiple paths to the same device. But we
* also want to be able to survive disks being removed/recabled.
* Therefore the sequence of opening devices is:
*
* 1. Try opening the device by path. For legacy pools without the
* 'whole_disk' property, attempt to fix the path by appending 's0'.
*
* 2. If the devid of the device matches the stored value, return
* success.
*
* 3. Otherwise, the device may have moved. Try opening the device
* by the devid instead.
*/
/*
* XXX We must not set or modify the devid as this check would prevent
* import on Solaris/illumos.
*/
#ifdef illumos
if (vd->vdev_devid != NULL) {
if (ddi_devid_str_decode(vd->vdev_devid, &dvd->vd_devid,
&dvd->vd_minor) != 0) {
vd->vdev_stat.vs_aux = VDEV_AUX_BAD_LABEL;
vdev_dbgmsg(vd, "vdev_disk_open: invalid "
"vdev_devid '%s'", vd->vdev_devid);
return (SET_ERROR(EINVAL));
}
}
#endif
error = EINVAL; /* presume failure */
if (vd->vdev_path != NULL) {
/*
* XXX This assumes that if vdev_path refers to a device path /dev/dsk/cNtNdN,
* then the whole disk can be found by slice 0 at path /dev/dsk/cNtNdNs0.
*/
#ifdef illumos
if (vd->vdev_wholedisk == -1ULL) {
size_t len = strlen(vd->vdev_path) + 3;
char *buf = kmem_alloc(len, KM_SLEEP);
(void) snprintf(buf, len, "%ss0", vd->vdev_path);
error = ldi_open_by_name(buf, spa_mode(spa), kcred,
&dvd->vd_lh, zfs_li);
if (error == 0) {
spa_strfree(vd->vdev_path);
vd->vdev_path = buf;
vd->vdev_wholedisk = 1ULL;
} else {
kmem_free(buf, len);
}
}
#endif
/*
* If we have not yet opened the device, try to open it by the
* specified path.
*/
if (error != 0) {
error = ldi_open_by_name(vd->vdev_path, spa_mode(spa),
kcred, &dvd->vd_lh, zfs_li);
}
/* XXX Apple - must leave devid unchanged */
#ifdef illumos
/*
* Compare the devid to the stored value.
*/
if (error == 0 && vd->vdev_devid != NULL &&
ldi_get_devid(dvd->vd_lh, &devid) == 0) {
if (ddi_devid_compare(devid, dvd->vd_devid) != 0) {
error = SET_ERROR(EINVAL);
(void) ldi_close(dvd->vd_lh, spa_mode(spa),
kcred);
dvd->vd_lh = NULL;
}
ddi_devid_free(devid);
}
#endif
/*
* If we succeeded in opening the device, but 'vdev_wholedisk'
* is not yet set, then this must be a slice.
*/
if (error == 0 && vd->vdev_wholedisk == -1ULL)
vd->vdev_wholedisk = 0;
}
/* XXX Apple - must leave devid unchanged */
#ifdef illumos
/*
* If we were unable to open by path, or the devid check fails, open by
* devid instead.
*/
if (error != 0 && vd->vdev_devid != NULL) {
error = ldi_open_by_devid(dvd->vd_devid, dvd->vd_minor,
spa_mode(spa), kcred, &dvd->vd_lh, zfs_li);
}
#endif
/*
* If all else fails, then try opening by physical path (if available)
* or the logical path (if we failed due to the devid check). While not
* as reliable as the devid, this will give us something, and the higher
* level vdev validation will prevent us from opening the wrong device.
*/
if (error) {
/* XXX Apple - must leave devid unchanged */
#ifdef illumos
if (vd->vdev_devid != NULL)
validate_devid = B_TRUE;
#endif
/* XXX Apple to do - make ddi_ interface for this, using IORegistry path */
#ifdef illumos
if (vd->vdev_physpath != NULL &&
(dev = ddi_pathname_to_dev_t(vd->vdev_physpath)) != NODEV)
error = ldi_open_by_dev(&dev, OTYP_BLK, spa_mode(spa),
kcred, &dvd->vd_lh, zfs_li);
#endif
/*
* Note that we don't support the legacy auto-wholedisk support
* as above. This hasn't been used in a very long time and we
* don't need to propagate its oddities to this edge condition.
*/
if (error && vd->vdev_path != NULL)
error = ldi_open_by_name(vd->vdev_path, spa_mode(spa),
kcred, &dvd->vd_lh, zfs_li);
}
if (error) {
vd->vdev_stat.vs_aux = VDEV_AUX_OPEN_FAILED;
vdev_dbgmsg(vd, "vdev_disk_open: failed to open [error=%d]",
error);
return (error);
}
/*
* XXX Apple - We must not set or modify the devid. Import on Solaris/illumos
* expects a valid devid and fails if it cannot be decoded.
*/
#ifdef illumos
/*
* Now that the device has been successfully opened, update the devid
* if necessary.
*/
if (validate_devid && spa_writeable(spa) &&
ldi_get_devid(dvd->vd_lh, &devid) == 0) {
if (ddi_devid_compare(devid, dvd->vd_devid) != 0) {
char *vd_devid;
vd_devid = ddi_devid_str_encode(devid, dvd->vd_minor);
vdev_dbgmsg(vd, "vdev_disk_open: update devid from "
"'%s' to '%s'", vd->vdev_devid, vd_devid);
spa_strfree(vd->vdev_devid);
vd->vdev_devid = spa_strdup(vd_devid);
ddi_devid_str_free(vd_devid);
}
ddi_devid_free(devid);
}
#endif
/* XXX Apple to do, needs IORegistry physpath interface */
#ifdef illumos
/*
* Once a device is opened, verify that the physical device path (if
* available) is up to date.
*/
if (ldi_get_dev(dvd->vd_lh, &dev) == 0 &&
ldi_get_otyp(dvd->vd_lh, &otyp) == 0) {
char *physpath, *minorname;
physpath = kmem_alloc(MAXPATHLEN, KM_SLEEP);
minorname = NULL;
if (ddi_dev_pathname(dev, otyp, physpath) == 0 &&
ldi_get_minor_name(dvd->vd_lh, &minorname) == 0 &&
(vd->vdev_physpath == NULL ||
strcmp(vd->vdev_physpath, physpath) != 0)) {
if (vd->vdev_physpath)
spa_strfree(vd->vdev_physpath);
(void) strlcat(physpath, ":", MAXPATHLEN);
(void) strlcat(physpath, minorname, MAXPATHLEN);
vd->vdev_physpath = spa_strdup(physpath);
}
if (minorname)
kmem_free(minorname, strlen(minorname) + 1);
kmem_free(physpath, MAXPATHLEN);
}
#endif
/*
* Register callbacks for the LDI offline event.
*/
if (ldi_ev_get_cookie(dvd->vd_lh, LDI_EV_OFFLINE, &ecookie) ==
LDI_EV_SUCCESS) {
lcb = kmem_zalloc(sizeof (vdev_disk_ldi_cb_t), KM_SLEEP);
list_insert_tail(&dvd->vd_ldi_cbs, lcb);
(void) ldi_ev_register_callbacks(dvd->vd_lh, ecookie,
&vdev_disk_off_callb, (void *) vd, &lcb->lcb_id);
}
/* XXX Apple to do - we could support the degrade event, or just no-op */
#ifdef illumos
/*
* Register callbacks for the LDI degrade event.
*/
if (ldi_ev_get_cookie(dvd->vd_lh, LDI_EV_DEGRADE, &ecookie) ==
LDI_EV_SUCCESS) {
lcb = kmem_zalloc(sizeof (vdev_disk_ldi_cb_t), KM_SLEEP);
list_insert_tail(&dvd->vd_ldi_cbs, lcb);
(void) ldi_ev_register_callbacks(dvd->vd_lh, ecookie,
&vdev_disk_dgrd_callb, (void *) vd, &lcb->lcb_id);
}
#endif
#if 0
int len = MAXPATHLEN;
if (vn_getpath(devvp, dvd->vd_readlinkname, &len) == 0) {
dprintf("ZFS: '%s' resolved name is '%s'\n",
vd->vdev_path, dvd->vd_readlinkname);
} else {
dvd->vd_readlinkname[0] = 0;
}
#endif
skip_open:
/*
* Determine the actual size of the device.
*/
if (ldi_get_size(dvd->vd_lh, psize) != 0) {
vd->vdev_stat.vs_aux = VDEV_AUX_OPEN_FAILED;
vdev_dbgmsg(vd, "vdev_disk_open: failed to get size");
return (SET_ERROR(EINVAL));
}
*max_psize = *psize;
/*
* Determine the device's minimum transfer size.
* If the ioctl isn't supported, assume DEV_BSIZE.
*/
if ((error = ldi_ioctl(dvd->vd_lh, DKIOCGMEDIAINFOEXT,
(intptr_t)dkmext, FKIOCTL, kcred, NULL)) == 0) {
capacity = dkmext->dki_capacity - 1;
blksz = dkmext->dki_lbsize;
pbsize = dkmext->dki_pbsize;
} else if ((error = ldi_ioctl(dvd->vd_lh, DKIOCGMEDIAINFO,
(intptr_t)dkm, FKIOCTL, kcred, NULL)) == 0) {
VDEV_DEBUG(
"vdev_disk_open(\"%s\"): fallback to DKIOCGMEDIAINFO\n",
vd->vdev_path);
capacity = dkm->dki_capacity - 1;
blksz = dkm->dki_lbsize;
pbsize = blksz;
} else {
VDEV_DEBUG("vdev_disk_open(\"%s\"): "
"both DKIOCGMEDIAINFO{,EXT} calls failed, %d\n",
vd->vdev_path, error);
pbsize = DEV_BSIZE;
}
*ashift = highbit64(MAX(pbsize, SPA_MINBLOCKSIZE)) - 1;
/* XXX Now that we opened the device, determine if it is a whole disk. */
#ifdef __APPLE__
/*
* XXX Apple to do - provide an ldi_ mechanism
* to report whether this is a whole disk or a
* partition.
* Return 0 (no), 1 (yes), or -1 (error).
*/
// vd->vdev_wholedisk = ldi_is_wholedisk(vd->vd_lh);
#endif
if (vd->vdev_wholedisk == 1) {
int wce = 1;
/* Gets information about the disk if it has GPT partitions */
#ifdef illumos
if (error == 0) {
/*
* If we have the capability to expand, we'd have
* found out via success from DKIOCGMEDIAINFO{,EXT}.
* Adjust max_psize upward accordingly since we know
* we own the whole disk now.
*/
*max_psize = capacity * blksz;
}
#endif
/*
* Since we own the whole disk, try to enable disk write
* caching. We ignore errors because it's OK if we can't do it.
*/
(void) ldi_ioctl(dvd->vd_lh, DKIOCSETWCE, (intptr_t)&wce,
FKIOCTL, kcred, NULL);
}
/*
* Clear the nowritecache bit, so that on a vdev_reopen() we will
* try again.
*/
vd->vdev_nowritecache = B_FALSE;
#ifdef __APPLE__
/* Inform the ZIO pipeline that we are non-rotational */
vd->vdev_nonrot = B_FALSE;
if (ldi_ioctl(dvd->vd_lh, DKIOCISSOLIDSTATE, (intptr_t)&isssd,
FKIOCTL, kcred, NULL) == 0) {
vd->vdev_nonrot = (isssd ? B_TRUE : B_FALSE);
}
#endif //__APPLE__
return (0);
}
static int
vdev_disk_open(vdev_t *vd, uint64_t *psize, uint64_t *ashift)
{
spa_t *spa = vd->vdev_spa;
vdev_disk_t *dvd;
struct dk_minfo_ext dkmext;
int error;
dev_t dev;
int otyp;
/*
* We must have a pathname, and it must be absolute.
*/
if (vd->vdev_path == NULL || vd->vdev_path[0] != '/') {
vd->vdev_stat.vs_aux = VDEV_AUX_BAD_LABEL;
return (EINVAL);
}
/*
* Reopen the device if it's not currently open. Otherwise,
* just update the physical size of the device.
*/
if (vd->vdev_tsd != NULL) {
ASSERT(vd->vdev_reopening);
dvd = vd->vdev_tsd;
goto skip_open;
}
dvd = vd->vdev_tsd = kmem_zalloc(sizeof (vdev_disk_t), KM_SLEEP);
/*
* When opening a disk device, we want to preserve the user's original
* intent. We always want to open the device by the path the user gave
* us, even if it is one of multiple paths to the save device. But we
* also want to be able to survive disks being removed/recabled.
* Therefore the sequence of opening devices is:
*
* 1. Try opening the device by path. For legacy pools without the
* 'whole_disk' property, attempt to fix the path by appending 's0'.
*
* 2. If the devid of the device matches the stored value, return
* success.
*
* 3. Otherwise, the device may have moved. Try opening the device
* by the devid instead.
*/
if (vd->vdev_devid != NULL) {
if (ddi_devid_str_decode(vd->vdev_devid, &dvd->vd_devid,
&dvd->vd_minor) != 0) {
vd->vdev_stat.vs_aux = VDEV_AUX_BAD_LABEL;
return (EINVAL);
}
}
error = EINVAL; /* presume failure */
if (vd->vdev_path != NULL) {
ddi_devid_t devid;
if (vd->vdev_wholedisk == -1ULL) {
size_t len = strlen(vd->vdev_path) + 3;
char *buf = kmem_alloc(len, KM_SLEEP);
ldi_handle_t lh;
(void) snprintf(buf, len, "%ss0", vd->vdev_path);
if (ldi_open_by_name(buf, spa_mode(spa), kcred,
&lh, zfs_li) == 0) {
spa_strfree(vd->vdev_path);
vd->vdev_path = buf;
vd->vdev_wholedisk = 1ULL;
(void) ldi_close(lh, spa_mode(spa), kcred);
} else {
kmem_free(buf, len);
}
}
error = ldi_open_by_name(vd->vdev_path, spa_mode(spa), kcred,
&dvd->vd_lh, zfs_li);
/*
* Compare the devid to the stored value.
*/
if (error == 0 && vd->vdev_devid != NULL &&
ldi_get_devid(dvd->vd_lh, &devid) == 0) {
if (ddi_devid_compare(devid, dvd->vd_devid) != 0) {
error = EINVAL;
(void) ldi_close(dvd->vd_lh, spa_mode(spa),
kcred);
dvd->vd_lh = NULL;
}
ddi_devid_free(devid);
}
/*
* If we succeeded in opening the device, but 'vdev_wholedisk'
* is not yet set, then this must be a slice.
*/
if (error == 0 && vd->vdev_wholedisk == -1ULL)
vd->vdev_wholedisk = 0;
}
/*
* If we were unable to open by path, or the devid check fails, open by
* devid instead.
*/
if (error != 0 && vd->vdev_devid != NULL)
error = ldi_open_by_devid(dvd->vd_devid, dvd->vd_minor,
spa_mode(spa), kcred, &dvd->vd_lh, zfs_li);
/*
* If all else fails, then try opening by physical path (if available)
* or the logical path (if we failed due to the devid check). While not
* as reliable as the devid, this will give us something, and the higher
* level vdev validation will prevent us from opening the wrong device.
*/
if (error) {
if (vd->vdev_physpath != NULL &&
(dev = ddi_pathname_to_dev_t(vd->vdev_physpath)) != NODEV)
error = ldi_open_by_dev(&dev, OTYP_BLK, spa_mode(spa),
kcred, &dvd->vd_lh, zfs_li);
/*
* Note that we don't support the legacy auto-wholedisk support
* as above. This hasn't been used in a very long time and we
* don't need to propagate its oddities to this edge condition.
*/
if (error && vd->vdev_path != NULL)
error = ldi_open_by_name(vd->vdev_path, spa_mode(spa),
kcred, &dvd->vd_lh, zfs_li);
}
if (error) {
vd->vdev_stat.vs_aux = VDEV_AUX_OPEN_FAILED;
return (error);
}
/*
* Once a device is opened, verify that the physical device path (if
* available) is up to date.
*/
if (ldi_get_dev(dvd->vd_lh, &dev) == 0 &&
ldi_get_otyp(dvd->vd_lh, &otyp) == 0) {
char *physpath, *minorname;
physpath = kmem_alloc(MAXPATHLEN, KM_SLEEP);
minorname = NULL;
if (ddi_dev_pathname(dev, otyp, physpath) == 0 &&
ldi_get_minor_name(dvd->vd_lh, &minorname) == 0 &&
(vd->vdev_physpath == NULL ||
strcmp(vd->vdev_physpath, physpath) != 0)) {
if (vd->vdev_physpath)
spa_strfree(vd->vdev_physpath);
(void) strlcat(physpath, ":", MAXPATHLEN);
(void) strlcat(physpath, minorname, MAXPATHLEN);
vd->vdev_physpath = spa_strdup(physpath);
}
if (minorname)
kmem_free(minorname, strlen(minorname) + 1);
kmem_free(physpath, MAXPATHLEN);
}
skip_open:
/*
* Determine the actual size of the device.
*/
if (ldi_get_size(dvd->vd_lh, psize) != 0) {
vd->vdev_stat.vs_aux = VDEV_AUX_OPEN_FAILED;
return (EINVAL);
}
/*
* If we own the whole disk, try to enable disk write caching.
* We ignore errors because it's OK if we can't do it.
*/
if (vd->vdev_wholedisk == 1) {
int wce = 1;
(void) ldi_ioctl(dvd->vd_lh, DKIOCSETWCE, (intptr_t)&wce,
FKIOCTL, kcred, NULL);
}
/*
* Determine the device's minimum transfer size.
* If the ioctl isn't supported, assume DEV_BSIZE.
*/
if (ldi_ioctl(dvd->vd_lh, DKIOCGMEDIAINFOEXT, (intptr_t)&dkmext,
FKIOCTL, kcred, NULL) != 0)
dkmext.dki_pbsize = DEV_BSIZE;
*ashift = highbit(MAX(dkmext.dki_pbsize, SPA_MINBLOCKSIZE)) - 1;
/*
* Clear the nowritecache bit, so that on a vdev_reopen() we will
* try again.
*/
vd->vdev_nowritecache = B_FALSE;
return (0);
}
