C++ (Cpp) lge_add_sound_devices Exemples

Exemple #1

0

Afficher le fichier

Fichier : board-msm7x27a_u0.c Projet : broneksce/lge_MonsterKernel-KK

static void __init msm7x2x_init(void)
{
	msm7x2x_misc_init();

	/* Initialize regulators first so that other devices can use them */
	msm7x27a_init_regulators();
	msm_adsp_add_pdev();
	if (cpu_is_msm8625())
		msm8625_device_i2c_init();
	else
		msm7x27a_device_i2c_init();
	msm7x27a_init_ebi2();
	msm7x27a_uartdm_config();

	msm7x27a_otg_gadget();
/* LGE_CHANGE_: 2012/11/2 [email protected] U0 Flash Porting */
#ifndef CONFIG_MACH_LGE
	msm7x27a_cfg_smsc911x();
#endif
/* LGE_CHANGE_E: 2012/11/2 [email protected] U0 Flash Porting */

	msm7x27a_add_footswitch_devices();
	msm7x27a_add_platform_devices();
	/* Ensure ar6000pm device is registered before MMC/SDC */
	msm7x27a_init_ar6000pm();
	msm7627a_init_mmc();
	msm_fb_add_devices();
	msm7x2x_init_host();
	msm7x27a_pm_init();
#if defined(CONFIG_I2C) && defined(CONFIG_GPIO_SX150X)
	register_i2c_devices();
#endif
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
	msm7627a_bt_power_init();
#endif
#ifdef CONFIG_MSM7X27A_AUDIO
	lge_add_sound_devices();
#endif
/* LGE_CHANGE_S: 2012/11/2 [email protected] U0 Flash Porting */
	msm7627a_camera_init();
/* LGE_CHANGE_E: 2012/11/2 [email protected] U0 Flash Porting */
	msm7627a_add_io_devices();
	/*7x25a kgsl initializations*/
	msm7x25a_kgsl_3d0_init();
	/*8x25 kgsl initializations*/
	msm8x25_kgsl_3d0_init();
	lge_add_gpio_i2c_devices();
/* 2012-10-25 [email protected] Boot Mode Check [START] */
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
	lge_board_pwr_on_status();
#endif
#ifdef CONFIG_LGE_BOOT_MODE
	lge_add_boot_mode_devices();
#endif
/* 2012-10-25 [email protected] Boot Mode Check [END] */
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
	lge_add_panic_handler_devices();
#endif
	lge_add_pm_devices();
}

Exemple #2

0

Afficher le fichier

Fichier : board-m3eu.c Projet : arjen75/L3_kernel2

static void __init msm7x2x_init(void)
{
	if (socinfo_init() < 0)
		printk(KERN_ERR "%s: socinfo_init() failed!\n",
		       __func__);

	msm_clock_init(msm_clocks_7x27a, msm_num_clocks_7x27a);
	msm_acpu_clock_init(&msm7x2x_clock_data);

	/* Common functions for SURF/FFA/RUMI3 */
	msm_device_i2c_init();

	msm7x27a_init_ebi2();
#ifdef CONFIG_SERIAL_MSM_HS
	msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO);
	msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
#endif

	msm_add_pmem_devices();
	msm_add_fb_device();

	platform_add_devices(m3eu_devices,
		ARRAY_SIZE(m3eu_devices));

	/*7x25a kgsl initializations*/
	msm7x25a_kgsl_3d0_init();

	if (lge_get_uart_mode()) {
		if (lge_bd_rev == LGE_REV_A)
			platform_device_register(&msm_device_uart3);
		else
			platform_device_register(&msm_device_uart1);
	}

	lge_add_input_devices();
	lge_add_misc_devices();
	lge_add_mmc_devices();
	lge_add_sound_devices();
	lge_add_lcd_devices();
	lge_add_camera_devices();
	lge_add_pm_devices();
	lge_add_usb_devices();
	lge_add_connectivity_devices(); /* [email protected], for Bluetooth/FM */

	/* gpio i2c devices should be registered at latest point */
	lge_add_gpio_i2c_devices();

	lge_add_ramconsole_devices();
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
	lge_add_panic_handler_devices();
#endif
/* [email protected] [2011-09-22] - Read power on status and update boot reason */
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
	lge_board_pwr_on_status();
#endif

}

Exemple #3

0

Afficher le fichier

Fichier : board-trfus.c Projet : rcunningham12/L38C-Dynamic-Kernel

static void __init msm7x2x_init(void)
{
	if (socinfo_init() < 0)
		printk(KERN_ERR "%s: socinfo_init() failed!\n",
		       __func__);

	msm_clock_init(msm_clocks_7x27a, msm_num_clocks_7x27a);
	msm_acpu_clock_init(&msm7x2x_clock_data);

	/* Common functions for SURF/FFA/RUMI3 */
	msm_device_i2c_init();

	msm7x27a_init_ebi2();
#ifdef CONFIG_SERIAL_MSM_HS
	msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO);
	msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
#endif

	msm_add_pmem_devices();
	msm_add_fb_device();

	platform_add_devices(m3_devices,
		ARRAY_SIZE(m3_devices));

	/*7x25a kgsl initializations*/
	msm7x25a_kgsl_3d0_init();

	platform_device_register(&msm_device_uart1);

	lge_add_input_devices();
	lge_add_misc_devices();
	lge_add_mmc_devices();
	lge_add_sound_devices();
	lge_add_lcd_devices();
	lge_add_camera_devices();
	//lge_add_pm_devices();
	lge_add_usb_devices();
	lge_add_connectivity_devices(); /*                                     */

	/* gpio i2c devices should be registered at latest point */
	lge_add_gpio_i2c_devices();

	lge_add_ramconsole_devices();
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
	lge_add_panic_handler_devices();
#endif

/*                                                                                   */
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
	lge_board_pwr_on_status();
#endif

#ifdef CONFIG_LGE_SILENCE_RESET
	check_smem_ers_status();
#endif
}

Exemple #4

0

Afficher le fichier

Fichier : board-msm7x27a_v1.c Projet : paaaz/SKernel

static void __init msm7x2x_init(void)
{
	msm7x2x_misc_init();

	/* Initialize regulators first so that other devices can use them */
	msm7x27a_init_regulators();
/* [LGE_BSP_S] [email protected], 20130212 - RT8966A miniABB regulator */
#ifdef CONFIG_MINIABB_REGULATOR
	init_miniabb_regulators();
#endif /* CONFIG_MINIABB_REGULATOR */
/* [LGE_BSP_E] [email protected], 20130212 - RT8966A miniABB regulator */
	msm_adsp_add_pdev();
	msm7x27a_device_i2c_init();
	msm7x27a_init_ebi2();
	msm7x27a_uartdm_config();

	msm7x27a_otg_gadget();

	msm7x27a_add_footswitch_devices();
	msm7x27a_add_platform_devices();
	/* Ensure ar6000pm device is registered before MMC/SDC */
	msm7x27a_init_ar6000pm();
	msm7627a_init_mmc();
	msm_fb_add_devices();
	msm7x2x_init_host();
	msm7x27a_pm_init();
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
	msm7627a_bt_power_init();
#endif
#ifdef CONFIG_MSM7X27A_AUDIO //ew0804.kim
	lge_add_sound_devices();
#endif
	msm7627a_camera_init();
	msm7627a_add_io_devices();
	/*7x25a kgsl initializations*/
	msm7x25a_kgsl_3d0_init();
	/*8x25 kgsl initializations*/
	msm8x25_kgsl_3d0_init();
	lge_add_gpio_i2c_devices();
/* 2012-10-25 [email protected] Boot Mode Check [START] */
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
	lge_board_pwr_on_status();
#endif
#ifdef CONFIG_LGE_BOOT_MODE
	lge_add_boot_mode_devices();
#endif
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
	lge_add_panic_handler_devices();
#endif 

// LGE_CHANGE_S, [email protected],Add pm device	
	lge_add_pm_devices();
// LGE_CHANGE_E, [email protected],Add pm device	
}

Exemple #5

0

Afficher le fichier

Fichier : board-msm7x27a_v1.c Projet : RolanDroid/lge_MonsterKernel-lproj

static void __init msm7x2x_init(void)
{
	msm7x2x_misc_init();

	msm7x27a_init_regulators();

#ifdef CONFIG_MINIABB_REGULATOR
	init_miniabb_regulators();
#endif
	msm_adsp_add_pdev();

	msm7x27a_device_i2c_init();
	msm7x27a_init_ebi2();
	msm7x27a_uartdm_config();
	msm7x27a_otg_gadget();
	msm7x27a_add_footswitch_devices();
	msm7x27a_add_platform_devices();
	msm7x27a_init_ar6000pm();

	msm7627a_init_mmc();

	msm_fb_add_devices();

	msm7x2x_init_host();
	msm7x27a_pm_init();
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
	msm7627a_bt_power_init();
#endif
#ifdef CONFIG_MSM7X27A_AUDIO
	lge_add_sound_devices();
#endif
	msm7627a_camera_init();
	msm7627a_add_io_devices();
	msm7x25a_kgsl_3d0_init();
	msm8x25_kgsl_3d0_init();
	lge_add_gpio_i2c_devices();
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
	lge_board_pwr_on_status();
#endif
#ifdef CONFIG_LGE_BOOT_MODE
	lge_add_boot_mode_devices();
#endif
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
	lge_add_panic_handler_devices();
#endif
	lge_add_pm_devices();
}